Time scale missing on Podcasts

I like the podcast time scale, which shows me how much time remains on a podcast, allows me to rewind 30 sec at a clip if my attention strays, and position the podcast where I want.
It does not show now with any podcast now; how do I turn it on?

I have the same problem!!! And it's terribly annoying. I tried solving the problem restoring the iPod, but nothing... please someone help us!
Bye,
Carlo

Similar Messages

Creating chart with "Time Scale" on group axis

Hello,
I am using Visual Studio 2005 with Crystal Reports (ver 10.2) and I would like to create a report with a "Date axis line chart". The group axis of the chart should act as a timeline, so I selected "Show Time Scale" in the general options of the group axis. I'll give you a short example of the input data:
It is just a simple table with 2 columns. In the first column there is a timestamp (X/group axis), in the second column an integer value (Y/data axis) that represents a status of something:
col1. . . . . . . . . . . . . . . . col2
2012-01-01 00:00:00 . . . . 2
2012-01-01 01:00:00 . . . . 1
2012-01-01 09:00:00 . . . . 3
2012-01-02 12:00:00 . . . . 1
.... and so on.
As you can see, the differences between the timestamps are not equal. Therefore I have selected the "Time Scale" option to get the values placed correctly on the timeline. When I execute it, the line is shown correctly, but the group axis has just one label per day. I would like to have one per hour, but I did not find any way to realize it. Is it possible to change the division of the group axis? In the tab "scales" of the options dialog you can only select "Day", "Month" and "Year" for the base unit. Is there any way to change the base unit from day to hour?
Thanks,
Jan

This being more of a design question I asked the CR design guys for some guidance / comment. (BTW., you posted to the correct / prefered forum here as you're using the bundled CR). Anyhow, the answer I got is not particularly encouraging.
We looked at the stand-alone / full version of CR but only confirmed that there is no other options than Day, Month or Year for this type of chart - even in the full CR designer.
Suggestions that did come up:
- Create a SQL Query that generates the missing data. Unfortunately, it would be up to you to figure this out...
- Use the subreport technique to fill the missing time. ( I have attached a sample report with some explanations )
If you have more questions, I'd recommend creating a thread in the [SAP Crystal Reports Design|SAP Crystal Reports, version for Visual Studio; forum. Quote this thread and see if they can provide further assistance.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Time-Scale option and bookmark setting possible on Creative ZEN Vision

Does the ZEN Vision: M 60GB has a time scale option and is it possible to set bookmarks?on songs in this player like in the old CREATIVE Nomad Jukebox 3. As a musician I like this options for exercising and rehearsals.

Theres a bookmark feature, but it needs improvment. Theres is no Time-Scaling, a feature I miss from the Zen Xtra.

Is there a way to change the download time (hour-minutes) for podcasts?, Is there a way to change the download time (hour-minutes) for podcasts?

Is there a way to change the specific time when subscriptions to podcasts are downloaded? I seem to be locked in to 6:29 pm.
Thanks.

i have the same problem. i bought a new external hard drive and i am trying to move my entire library onto it. i copied all of my itunes library onto it but when i tried to delete a song off of my initial C: drive to test it, i had to go in an individually change where the songs location was. i already tried changing where the itunes music folder was located however the library still says its located on the C: drive.

Can't adjust the default time scale when creating a new appointment in Outlook 2010

Good Afternoon, I have found a question on these community boards that propose an issue that I am currently experiencing. The answer; however, was not the solution for me. I used the same name as the original post and will add the original text as it is
exactly what I am experiencing.
"When creating a new appointment in the month view Outlook 2010, the default time scale or duration is 2 days. I tried resetting the view, adjusting the time scale, and creating a new profile. It only seems to happen when creating the appointment
in the Month view. ??? Day and week view work fine and appointment can be created w the standard 30 minute time scale. But the time scale in the month view although says 30 mins, it creates appointments in 2 day durations."
This is exactly what happens to the user I am assisting. When in "month view" double clicking the day will bring up a new appointment with the times within the same day. If you click the "new appointment" button in the ribbon it
sets the end time to the following day. This only happens in the month view every other view works as it normally should. I have tried it several times being sure multiple days are not selected. It still gives me an end time for the following day. I have reset
the view, changed the time scale but nothing seems to bring it back to the default same day appointment. Any ideas?
Thanks for any assistance you can provide.

It is a default in Outlook 2010 in month view. The "time scale" selection is greyed out. Very frustrating. Everytime I select "New Appointment," a duration of 1 day is automatically selected; midnight to midnight. I end up doing
most appointments twice because I forget to change to end date back to the day of the appointment. "New meeting Request" works fine. So does "New All Day Event" when you deselect "All Day Event." I can't see how this default behavior
provides optimal results under any circumstances. Very frustrating.

For the first time, I downloaded a podcast in the podcast app by clicking on the cloud icon. Now, every single play button for all of my podcast episodes is grayed out. Why can't I play any of my podcasts any more?

For the first time, I downloaded a podcast in the podcast app by clicking on the cloud icon. Now, every single play button for all of my podcast episodes is grayed out. Why can't I play any of my podcasts any more?

Greetings Heather,
After reading your post, it sounds like you are experiencing an error with the Podcasts app. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD

How to display on the graph three or more waveforms where time scale is not an index of array but a real time

How to display on the graph three or more waveforms where time scale is not an index of array but a real time:
I measure three voltages Va, Vb, and Vc on my Test stands every 3sec. So I’m building four arrays (Va, Vb, Vc, Time) and combine all in one.
Time
Va
Vb
Vc
0
5
3.5
2.8
3
4.9
3.6
2.9
6
4.8
3.8
2.1
Now I need to show on the graph in which scale X is “Voltage” and scale Y is “Time”.
How can I do it?
Thanks a lot,
Boris

Hi, thanks all your reply.
You may find "points_to_bar_graph.vi" from this website, I find it by this way.
I will ask a stupid question: I don't have any photo processing software, how can I save the vi into a picture format?
So here I just paste it into word document.
Attachments:
question.doc ‏520 KB
points_to_bar_graph.vi ‏62 KB

Updated my iPhone5 to iOS8 and face time is missing.., how do I get it back?

Updated my iPhone5 to iOS8 and face time is missing.., how do I get it back?

Dubai has banned FaceTime and is not available on devices made for that market. You will not be able to use FT on that device, no matter what country you are in or what carrier you are using.

Relative Time Scale for X-Axis when creating a Line Graph in CS3?

Is there a way to get the APPROPRIATE RELATIVE scale for the X-Axis (Category) when you're using dates?
Example:
If this is my data set:
                    Group A          Group B
01/03/99                1                5
01/04/99                11                3
01/05/99                6                12
11/27/07                63                54
If I plot this in Xcel, by default, each date (x-axis) will be spaced the same distance apart. However, there is a checkbox to "time-scale" the X-Axis which will place the dates relative to one another. In other words, if we're talking about a bar graph, the first three bars would be close together on the left side of the chart, and the 4th bar would be waaaaaay on the right side of the graph.
So, below, if 'x' is a bar, I keep getting this in CS3:
x     x     x     x
I want to get this:
x x x             x
Get it?

Is there a way to get the APPROPRIATE RELATIVE scale for the X-Axis (Category) when you're using dates?
Example:
If this is my data set:
                    Group A          Group B
01/03/99                1                5
01/04/99                11                3
01/05/99                6                12
11/27/07                63                54
If I plot this in Xcel, by default, each date (x-axis) will be spaced the same distance apart. However, there is a checkbox to "time-scale" the X-Axis which will place the dates relative to one another. In other words, if we're talking about a bar graph, the first three bars would be close together on the left side of the chart, and the 4th bar would be waaaaaay on the right side of the graph.
So, below, if 'x' is a bar, I keep getting this in CS3:
x     x     x     x
I want to get this:
x x x             x
Get it?

How to set the correct time scale of VI ?

I created a VI to display waveforms on the waveform graph. The problem is the time scale of the VI is always the year 1904.I tried to select absolute time in Property options of the waveform, but it remained the same. Can anybody help me with this? Thanks.

> The x-scale is always 01/01/1904 even after I selected the 'absolute
> time' option from waveform chart properties. If I add 2004 as offset
> of x-scale as suggested by the previous post, the waveform of the
> signal cannot be displayed, the system think it is still running in
> 1904.Could you give me some further help?
>
Your description doesn't give enough information to pinpoint the
problem, so I'll list off a few things that could be going on.
The graphs and charts accept many datatypes. If you are using the
waveform, display it on a regular waveform indicator and see what the
timestamp and deltaT are. If these are correct, then the graph should
be able to display things with no further changes except that you may
need to turn on X Scale Autoscaling so that it will zoom and shift to
show the plotted data. Charts will shift, but by default will not zoom
in, and it might make sense there sometimes too depending on the delta T
and amount of data plotted.
If the timestamp on the waveform is incorrect, then it is much easier to
construct the properly marked waveform than make the graph add to it to
label the waveform's time differently.
If you are not using the waveform, then you may be using a cluster of
X0, dX, and Y array wired to the graph. This is very similar to the
waveform, and again, it is better to add offsets to get the X0 to
display correctly on a numeric. You can extract this number or display
the cluster in an indicator, then format the numeric to display absolute
time.
If you are simply wiring the Y array, then LV will construct the X
values based upon the number of points beginning at 0 and incrementing
by one by default. When displayed as absolute time, this will default
to midnight Jan 1 2004 plus an offset based upon your timezone. In this
case, since there is no X information being piped into the graph, it is
better corrected by going to the graph properties for the X Scale and
setting the X Offset to the seconds between now and 1904. This is a
constant you can compute when your program starts up or you can use a
calculator, whichever is easier. You will also likely want to set the X
Multiplier to the deltaT between successive points. 0.001 for 1KHz, 1
for 1Hz, etc.
Finally, if these suggestions don't make sense or don't help, you might
want to explain more about what doesn't work.
Greg McKaskle

Hi I Have A Prepaid SmartPhone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line.

Hi I Have A Prepaid Smart Phone Right Now With Verizon For About 7-Months So Far. I Have Always Paid On Time No Missed Payments Good Standing Account, I Tried To Switch Over To A 2-Year Contract With Verizon And They Wanted A $400 Deposit For Only 1-Line. Is There Anyway I Can Use My Excellent Payment History With There Prepaid Department To Switch To A 2-Year Contract And Not Have To Pay The $400 Deposit. And This Is Due To The Fact I Have No Credit History Whatsoever

Since you have no credit history, my guess is you would need at least a year of on time payments, and I'm not sure a pre-paid account would qualify as you can stop at any time.
You didn't specify your age, but getting started int he credit world is not easy - you may try applying for a gas card, or a credit card, and USE them, pay them off each month - and expect to take a year or more to establish a record.

Question about waveform chart time scale

Hello,
I have question regarding to time scale on my chart, I want it to show the actual measured time, for example from 0-30 seconds, but instead my minimum value is 302654789854 . Please help me to fix it.
Regards ,
Stella Deheryan

You can modify the way the time is displayed on the axis by right clicking the chart and selecting properties. On the display format tab, select relative time. This should show the X-axis scale as HH:MM. Or pick any other type of formatting you want.
Best Regards
Michiel
Applications Engineer
NI Belgium
http://www.ni.com/ask

Hour scale missing from iCal on daily display.

Did anyone else notice that the time scale for the day is no longer displayed down the left side of the daily display. Didn't it used to show?

I noticed this as well, also for some reason in iCal and other applications such as with the screen saver clock it only seems to display one time, it is stuck on 7:08 for some reason, the Mac's clock is working fine but i can't get any of the correct times to show up in iCal or on the screensaver.

Time machine missing files

Timeline
1. 11 days ago I buy a new 15" retina haswell macbook pro running mavericks, and a new 2TB time capsule.
2. Yesterday I returned the macbook pro because it was making creaking noises and had it replaced with a new one.
3. Now I try and restore my backup.
Story
I restored from my latest time machine backup by pressing CMD-R while booting and specifying to restore from the Time Capsule. It took a couple of hours over wifi and finally restored, when I came back to it, the machine had rebooted and I was at my normal login screen.
So I thought the restore had been successful at this point and I log in, however it asks me for my Apple ID login as if i've never entered it before (I have), and I have some new mavericks icons at the end of my dock that I had previously removed. I open up my terminal (i'm a web developer) and I notice its missing my custom prompt (oh-my-zsh) which I track down to the .zshrc file missing.
I check my databases and they are all corrupted. The MySQL error file is constantly spamming itself saying the data is corrupt and that it might be missing its binlogs. A number of my apps don't remember that they are licensed. The machine has forgotten most of my preferences such as tap to click, however it has remembered things like my desktop background and my safari preferences (they were not synced from icloud I made sure).
I dig into this a bit more by mounting the time capsule and having a look around in the terminal.
cd /Volumes/Time\ Machine\ Backups/Backups.backupdb
ls -lah 2013*/Macintosh\ HD/Users/jon
This prints out the contents of what the backup considers my home folder to be like at every backup (there were 23 backups stored over the 10 days). First backup being on the 2nd of November, most recent being on the 12th November.
I see that from the 7th my .zshrc went missing, it was not in any subsequent backups after that, so I tried restoring back to that date. After restoring my terminal preferences are back, but the databases are still corrupt and I notice other things missing instead.
I dig into it a bit more and list the files again.
Then I notice just how bad it is.
On certain backups it has missed massive numbers of files, including directories such as Downloads Library Desktop etc. Then they come back in the next backup, or go missing forever. I know time machine doesn't backup the entire computer each time, but I know that it should be creating HARD links in the filesystem, so that EVERY backup appears to be a complete system backup. This is not the case.
I can rebuild this new macbook pro to have everything I need on it again, but I CANNOT trust my £250 Time Capsule to take backups, in which case it becomes an extremely expensive router + hard drive.
I think this might be a bug in Mavericks, 10 days is not very long for backups to start going astray!
Is there any way I can repair this somehow? Has anyone else had this kind of problem? I phoned apple support and they just tried to guide me through doing a re-install, when I explained that the backups themselves seemed to be missing files the support agent just didn't seem to understand, not very helpful at all. As a fellow engineer I would prefer to speak to another engineer and I could provide all the diagnostics they could want, short of giving them ssh access.

Sorry to hear about the same bug on your system, seragan.
I would suggest the following, if you still can find an older TM backup that has a full data set:
- Export all your current local ("On my Mac") mailboxes from Mail to a safe place
- Quit Mail and manually replace the whole folder ~/Library/Mail/V2 with the one from the last good backup
- Start Mail, and then reimport the mailboxes you exported previously
- Manually move the appropriate emails inside the "Import" mailbox-hierarchy to the correct mailboxes
This is an approach that at least would have worked for me, as my faulty local Mail data seemed to have collected emails correctly since the first day of backup failure. ...meaning that the old, good backup plus the current state of my mailboxes would have resulted in a lossless, complete set.
(There can be another, more-or-less cosmetic, bug with Mail Import - showing numbered folders with duplicate mail which can be deleted afterwards).
To re-iterate the TM bug: Same thing also happened on my parents' MacBook. This time the missing data was a a folder inside ~/Documents.
To break the buggy backups and force TM to do a complete backup, the following worked as a fix:
- In TM system settings, add the problematic parent folder of the missing data to the list of excluded items
- Run a backup
- Remove the excluded folder again from TM system settings
- The next backup will take longer and TM does a "deep traversal" or such, and in the end all data does show up in the backup
Theoretically you could exclude/include your whole hard drive (to play safe), but that only works if there is another, secondary drive backed up also. (TM needs something valid to do a backup. If your primary hard drive is the only source for your backup, you would have to exclude/include several folders in two or more steps to cover all existing files).
In any case, the terminal command "tmutil compare" will serve well to show if anything is missing in the last backup.
Time to report this to Apple. Can we be sure this is only a bug in 10.9.2/3?

Creative Media Source 5 SVM Time Scale Clean Up Prob

hi, im Using the Creative Sound Blaster Li've! 24 Bit sound card and using Creative Media Source Player 5 to play my?audio and video files. I get a problem, however, when i start to play a song from my Library,?The first message reads(this is when i double click to song to play it): Exception --CreateObject : Exception:ObjectNotFound? from:CTimeScaleFilter Message:"Could not load Time Scale Filter" (after that message it tells me when this problem happened)?The second one reads(after i click ok): Exception --CreateObject : Exception:Undefined? from:CNoiseReductionFilter? Message:"Could not load Noise Reduction filter"? (and then the time it happened)?Third Message reads: Exception --CreateObject : Exception:Undefined? from:CSvmFilter? Message:"Could not load Time Scale Filter" (and then the time it happened)?does anyone know why this happens when i play a song from my playlist or otherwise? and right after i stop playing the song, i can click on the time scale, svm, and clean up like nothin happened, i can change the settings and what not....its really starting to tick me off because it Just worked, and then i closed out of the program and started it back up again, and now it Doesnt work, please help, and it would be awesome if i could fix it without reinstalling the sound card, its drivers, and the like...

Ok, followed your instructions, installed media source direct from the cd from explorer from directory CMS/Setup to the setup.exe file. Intall took longer this time, but, still no Creative Media Source installed -
still have the same problem. Still need more help.

Time scale missing on Podcasts

Similar Messages

Maybe you are looking for