Time stream generation report issue - ZZTSTRREGENERATE

Hi,
As per note 1421812 - Report to automatically generate all time streams, we have generated report ZZTSTRREGENERATE for auto generation of time streams.
But when the report is executed time streams are not getting generated. Rather we get the message ' Timestream (XXXX) not generated for year 2016, Timestream (XXXX) not generated for year 2017'.
I have checked the associated calendar in the Time stream ID and it has validity till 2020. Not sure why this is happening.
Has someone faced this ? Any pointers will be of help.
Thanks in advance.
Durai

HI Durai,
Please refer to this thread:
800:APO Time stream (TS XXXXX) not generated for the year 2 015
Kind Regards,
Mariano

Similar Messages

Time stream and Factory Calendar settings issue. Problems in scheduling!!

Hi,
We have a factory calendar of working days from SUN-THU only (5 days a week).
Every working day starts at 07:00:00 (first shift) and ends at 06:59:59 at the following day.
I am not sure how to set the time stream. Do I set it for daily (5 days a week) with gaps start at 07:00:00. Or, as the standard way as daily (all days 1 -7) 00:00:00 - 23:59:59 without gaps.
We are using the planning board to schedule production orders that were created in ECC, but we see that we have problems with date corelation between the systems, and we think it is due to some wrong setting of the time stream!
Thanks for your replies

Hi,
For scheduling, the time stream of resource is relevent. As to how to generated the time stream, it depends on your resource capacity setting and your factory calendar. I'm not sure why your factory calendar starts at 7:00:00 daily. For the time steam of the resource, it should be ok to start at 7:00:00, and you mayexecute the time stream generation (ta. /sapapo/rest02) to save the time stream in LiveCache.
Claire

Hyperion Smart Cut Session Issue streaming multiple reports at a time using

This is a lengthly post with details, Please review with Patience:
We are trying to integrate Workspace based web Analysis reports within our intranet portal, thru portlets (made from individual workspace smartcut link), so that users can customize their page as needed, Once they login thru intranet, Cookie is set and passed to succeeding smart cut links via secured http headers. This part is fine, but mainly running into issue with streaming several multiple web-analysis reports at a time,+ we are using Iframe to display and stream multiple individual reports on to one page, but unfortunately all Iframes are sharing one session rather than creating individual session, mostly because of limitation of current web analysis system architecture and IE browser behavior with sessions .
Which Hyperion reporting tool does allow to stream multiple reports at a time? ideally we want to create Iframe of each workspace report so that users can customize and pick portlets as needed. To stream multiple reports at a time.
Problem Description: Hypeiron Web Analsysis, Smart cut reports incorrectly rendering images and intermixing dash boards on POV changes upon multiple reports being diplayed at one time thru Iframe's, issue seem to mostly relate to Hyperion using single session rather to multiple session when displaying several web reports at a time.
Steps Needed To Reproduce:
User logs into workspace.
user click on expolore and able to view the report without any issues.
When right on any of the report and select properties.
Select the SmartCut url and paste it in the Internet explorer.
The webanalysis report opens without any issues.
Similarly user copies the smartcut url for a different report and paste the link on a different tab or new window of same browser.
The report on the first tab gets over written of the report of the second tab of the browser.
The issue happens when two different reports and opened on a browser with multiple tabs. The reports get over written.
Oracle development answer:
In the described scenario opening new browser window does not spawn a separate independent browser session. A new browser window is supplied with URL pointing to the same domain, so all browser cookies including the "ORA_WA_SID" (WA session cookie) are shared between the windows. But multiple application instances cannot run in the same browser session simultaneously because of session sharing. This is not actually a defect, but rather a limitation of current system architecture and browser behavior. And there is no way to fix it programmatically on the product side.

Hi MeHyper,
Your current arrangement puts most of the session handling and persistence on the client. This forces you to accept whatever the client decides to persist and propogate between browser elements (in this case iframes).
My approach would be to:
Consider coding your portlets to manage the sessions. Manage using a somewhat stateless strategy so that each request to the server requires a login and connect, retrieve, and disconnect. Each Iframe should access a different portlet url (or provide a different query) based on its content.
This way, in theory, you can invalidate the sessions and related cookies and update the various report elements independently.
Is smartview out of the question here?
Regards,
Robb Salzmann

Ipod6th generation hardware issue(3 times in a row in less than a month)

Hi everybody, i dont whether this is useful or not, i got replaced ipod 4th generation with 6th by paying Rs7000 but the 6th gen has hardware issues on d same day dey get replaced, dont knw wat to do? pls suggest a solution as i want it replaced wid 7th generation, but they deny as they cant do that, i mean i am fed up with my visits to the service centre, and whats disturbing is that the it has happened 3 times, 2 times earlier the hardware issue occured in the 6th generation on the same day they were given to me. I am clueless as to what to do, so kindly help me out dearones.

If they are happening at 2 minute intervals check the Settings>Notifications>Messages>Repeat Alert setting.

SSD/HDD Time Machine Back Up Issue

I am having an issue with my 2010 13" MacBook Pro.
A few months ago I removed the optical drive, replaced it with the existing HDD, and then replaced the HDD with an SSD.
The SSD runs my OS (Mountain Lion 10.8.4) and Applications, while the HDD is where I store my Home Folder.
I did a Time Machine Back Up in March using a SeaGate external hard drive, with no issues.
Last week I updated the Time Machine Back Up using the same external hard drive, but this time something has gone wrong.
I am unable to move files within my system without Finder prompting me for a password.
I am unable to write to any external USB as I do not have 'permission to perform some actions'.
I am unable to connect to external servers via VPNs.
Finder does not open a new window when slected, I am forced to press 'Comman+N' every time.
Numerous other issues.
I have read that it's an issue to do with ACL's, but since my Home Folder is not on my Startup Disk, there is no way for me to do this.
I am the only account on the computer, and both drives have 'Read & Write' permissions.
Does anyone know how to fix this issue?
Please feel free to ask for more details.
Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook 2> /dev/null; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Time Machine always reporting wrong size after several full resets

Good afternoon,
I have been using Time Machine on a Macbook Pro 2012 backing up to a QNAP NAS TS-419 P II
After a year of using Time Machine without any issues I've now ran into a situation i do not seem able to resolve.
For several reasons I wanted to do a full Time Machine reset and do a new full back.
For that, after trying various solutions with no succes, I've deleted the sparse bundle, switched off Time Machine support, restarted the NAS, switched on Time Machine support again. Furthermore i did full reset on the Macbook following as per http://pondini.org/TM/A4.html
However every time I start a new backup Time Machine seems to limit the sparse bundle to 1.07 TB, while I have not set any file size restrictions. Next to that it's also reporting only 657 GB of the 1.07 TB is actually free. As if the old sparse bundle with the backups were still there.
Anyone who has been facing the same issue?
Thanks,
Gijs

Actually, I can shorten this down to just:
Mount TimeMachineBackup disk, it reports ~95GB free.
Repair it, it reports 800+GB free
Unmount it
Remount it, it again reports ~95GB free.
Rinse. Repeat.

IPhoto 9.6, after subscribing to a photo stream it reports there are no photos in that stream - on my iPad (iOS 8.0.2) they show fine.. Fixes?

iPhoto 9.6, after subscribing to a photo stream it reports there are no photos in that stream - the stream shows (right title but it says there are no photos in the stream - other streams are just fine - on my iPad (iOS 8.0.2) they show fine.. Fixes?

Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.

DPC spike at Windows automatic maintenance startup. Can not leave the computer alone processing real-time streams.

This is what happens when I leave the computer idle for a while and the Windows automatic maintenance starts:
Driver file Description ISR count DPC count Highest execution (ms) Total execution (ms)
ntoskrnl.exe NT Kernel & System 0 50764 0,235854
332,950426
A DPC spike is generated by ntoskrnl.exe causing drop outs in real-time streams.
JTS

Hi Fjtorsol,
We hope your issue has been resolved, if you've found solution by yourself. you could share with us and we will mark it as answer.
This high Deferred Procedure Call (DPC) latencies are usually caused by certain drivers, if it is caused by automatic maintenance, please re-check your task schedule which is marked as “when computer is idle”. As what has been suggested by MVP ZigZag, please
use the Microsoft Windows Performance Analyzer from the Windows Assessment and Deployment Kit (ADK) to identify the cause of any DPC latency spikes.
https://www.microsoft.com/en-gb/download/details.aspx?id=39982
DPC CPU Usage Summary Table will open containing a list of drivers/program. This list is already correctly sorted (by the Actual Duration column). The process on the very top of the list is therefore likely to be the cause of your problem.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Time stream from resource not valid for total display period

Dear Friends,
In APO after PPDS Run, and executing Product View, in period tab of product view I am getting an error with following meassge.
Time stream from resource WP5_0110_001 not valid for total display period
Message no. /SAPAPO/RRP_PT055
Diagnosis
The time stream for resource WP5_0110_001 is not valid for the general display period. This can cause the display of the time buckets profile for this resource in the product planning table to be inaccurate.
Can anybody come across such type of error, if yes please let me know the possible solutions to overcome this problem.
Thanks and Regards
Nilesh

Kinldy refer to SAP Note No. 449452 for the exmplanation and solution to the issue.
Rgs - Vikas

User report issues in 1.1.0.21.97

A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsema

We have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue

Time stamps in reports and status are 7hrs off, is there a setting?

Time stamps in reports and status are 7hrs off, is there a regional setting to correct this?
When I run e-load all reports and any other time stamps are 7 hours off. (If I run a test at 9:20am pacific time the e-load shows 4:20pm). The e-test scripts show the correct time if I run those via e-test.
Is there a setting for this?
Thanks!

Hi hagstal,
Actually, this is a known issue on Vista.
You need to edit the follwoing file to specify your timezone;
\Empirix\EmpAppServer\bin\JbossService.conf
Please refer to Known Problems section of e-TEST suite Release Notes for more details.
regards

Updating AUD$ consumes most of the time in AWR report.

Hi All,
It's really good to see, great people passing their help to folks like us and making our life easier. Going forward,I am investigating on of the performance issue and analyzing the AWR report. By looking AWR, I did find updating aud$ taking most of times in AWR report. Following are the information , I extracted from the database and AWR report. Please see, what can be done to take away the bottlenecks.
Version -- 11.1.0.6.0
OS      -- HPUXX Itanium
Event                                 Waits     Time(s)   (ms)   time Wait Class
enq: BF - allocation contentio        9,007       6,893    765   45.5 Other
DB CPU                                            2,565          16.9
db file scattered read              555,031       2,428      4   16.0 User I/O
read by other session               288,910       1,428      5    9.4 User I/O
PX Deq Credit: Session Stats         22,650         231     10    1.5 Other
209fr01svbb5s
                                                          wait   % DB
Event                                 Waits     Time(s)   (ms)   time Wait Class
db file scattered read              291,023       1,973      7   61.6 User I/O
DB CPU                                              890          27.8
read by other session                81,495         340      4   10.6 User I/O
log file sync                         1,210          21     17     .6 Commit
db file sequential read              30,452          15      0     .5 User I/O
Elapsed      CPU                  Elap per % Total
Time (s)   Time (s) Executions   Exec (s) DB Time    SQL Id
     3,134        833          118       26.6    97.9 209fr01svbb5s
update sys.aud$ set action#=:2, returncode=:3, logoff$time=cast(SYS_EXTRACT_UTC(
systimestamp) as date), logoff$pread=:4, logoff$lread=:5, logoff$lwrite=:6, logo
ff$dead=:7, sessioncpu=:8 where sessionid=:1 and entryid=1 and action#=100
-------------------------- Plan from Cursor ---------------------------------------
SQL_ID 209fr01svbb5s, child number 0
update sys.aud$ set action#=:2, returncode=:3,
logoff$time=cast(SYS_EXTRACT_UTC(systimestamp) as date),
logoff$pread=:4, logoff$lread=:5, logoff$lwrite=:6, logoff$dead=:7,
sessioncpu=:8 where sessionid=:1 and entryid=1 and action#=100
Plan hash value: 1651467381
| Id | Operation          | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT   |      |       |       |     2 (100)|          |
|   1 | UPDATE            | AUD$ |       |       |            |          |
|* 2 |   TABLE ACCESS FULL| AUD$ |     1 |   139 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - filter(("ENTRYID"=1 AND "ACTION#"=100 AND "SESSIONID"=:1 AND
              ("SPARE2" IS NULL OR USERENV('ISDBA')='TRUE')))
++++ Last Anylzsed +++++
TABLE_NAME                     LAST_ANAL
AUD$                           08-NOV-07
++++++++ Table Size ++++++++++++++++++++++
SQL> select sum(bytes)/1024/1024 "Audit Size" from dba_segments where segment_name='AUD$';
Audit Size
      2469Regards

Before purging audit data I would suggest two things. First what is the time period for the report in question? If it is for a low usage period then the audit activity as a percentage of the overall load may be a bit distorted. It may also be worth checking to see what information the audit captured as you could have a contractual or legal obligation to capture the data.
Second and most import look to see what audit rules are in effect. By just removing a few unneeded rules such as auditing successful logins/logoffs or changing from by access to by session for specific objects you could potentially remove most of the activity being shown.
You may also want to check to see if a purge job has been set up. See dba_scheduler_jobs and Oracle proviced package: DBMS_AUDIT_MGMT.
HTH -- Mark D Powell --

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

How to reset Quick Time Streaming Server localhost:8000

When I set up Quick Time Streaming Server using http://127.0.0.1:1220/ somehow it screwed up http://localhost:8000 I can no longer get any stream from localhost:8000 when I use iTunes to listen to it.
How do I reset the port? The localhost:8000 port works perfectly fine on my other Mac when I did not started Quick Time Streaming Server on it. It only caused me problem on the Mac that I started Quick Time Streaming Server.
Maybe a better question is: How do I delete Quick Time Streaming Server completely?

I've seen conflicting reports on DSS on Lion. One post elsewhere here claimed that DSS won't work on Lion, but provided no details. This site claims that it does:
http://www.networkjack.info/blog/2011/08/30/quicktime-streaming-on-lion-server/
All I can suggest is trying it. Or if it's not too late, you could return your Lion-based Mini and purchase a refurbished mini with Snow Leopard Server; Apple still lists it in the Apple Store's refurb section.
Broadcaster can send a stream directly to one or a very small number of clients, but depended on a relay through QTSS/DSS for serving a significant number of viewers. Apple never provided much in the way of documentation beyond the Help files in QTB, but if you do a web search, you'll find some tutorials. If you want something more robust and more fully supported, you might want to look into a third-party product like Wirecast:
http://www.telestream.net/wire-cast/overview.htm
Regards.

Quick Time streaming Service wont start on Server.

We are trying to set up quick time streaming and quick time broadcaster so that we can share our broadcasts within school live to other schools within our county.
we plan to use one machine to broadcast/capture the broadcast and the server to run quick time server and handle the access to the broadcast.
At the moment I have a laptop running quick time broadcast and a G4 tower running quick time streaming server (internet interface) which is working fine.
Ive tried now to get our server which is running 10.5.1 to run as my quick time streaming server. but whenever i click on start service under server admin i get the error
Service couldnt start because RTS port 554 is in use or being used by another service
service couldnt start because RTS port 7070 is in use or being used by another service
service couldnt start because RTS port 8554 is in use or being used by another service
service couldnt start because RTS port 8001 is in use or being used by another service
Service couldnt start because RTS port 80 is in use or being used by another service
and the service instantly then stops itself again. I prosumed this problem was due to my G4 also running quick time streaming server and using up the ports so i stopped the streaming service service on the G4 and turned the computer off but I received the same error again when i tried again later on
Does anyone have any idea what i can do to get streaming service running on m server,
Thanks
Rob

I've seen conflicting reports on DSS on Lion. One post elsewhere here claimed that DSS won't work on Lion, but provided no details. This site claims that it does:
http://www.networkjack.info/blog/2011/08/30/quicktime-streaming-on-lion-server/
All I can suggest is trying it. Or if it's not too late, you could return your Lion-based Mini and purchase a refurbished mini with Snow Leopard Server; Apple still lists it in the Apple Store's refurb section.
Broadcaster can send a stream directly to one or a very small number of clients, but depended on a relay through QTSS/DSS for serving a significant number of viewers. Apple never provided much in the way of documentation beyond the Help files in QTB, but if you do a web search, you'll find some tutorials. If you want something more robust and more fully supported, you might want to look into a third-party product like Wirecast:
http://www.telestream.net/wire-cast/overview.htm
Regards.

Time stream generation report issue - ZZTSTRREGENERATE

Similar Messages

Maybe you are looking for