Time stretch or increase video still

I'm creating a video slide show from my niece's wedding photos and I wanted to increase the duration of 40 - 50 slides so that they end at the same time as the music. Suggestions?
I can time stretch one image or cut short the music but that is not the desired effect I would like.
I'm using PE 7 any suggestions would be great.
Thank you in advance.

To adjust the Duration of Stil Images, one has two options:
They can go to Edit>Preferences>Still Image Duration, and make the adjustment there. However, this is ONLY for Stills that are Imported, after the change. It does not affect any Still Images that are already Imported. Now, one can Delete certain Imported Images, and Import them again, after this change.
Or, one can Click+drag on the Tail of a Still, to increase its Duration, from that, with which it was Imported. When I do this, I like to have the Info Panel open, to see exactly how I am changing that Duration.
Good luck,
Hunt

Similar Messages

  • Time stretch: ramp increase/decrease

    Is it possible to gradually increase /decrease the % of a video?
    I have TGA footage that I’d like to begin at normal speed then gradually increase this to about 50%.
    I’m fairly certain the built in Tim Stretch functionality isn’t capable of this, but was wondering if there was perhaps an expression, or clever workaround?
    Any ideas?
    Thanks
    Jeff

    Wow, you’re right..
    I’ve been using Time Remapping as a method of simply jumping between time intervals.. 
    …forgot it can be used for slow motion effects and such.
    Thanks
    Jeff

  • How to time stretch a picture frame (not video) that I have panned and zoomed in Premiere Elements 11?

    Previously used Premiere elements 11 and could zoom in on a picture frame, but also Time stretch it, so the zoom would be slow.  Cannot figure out how to do this in Premiere elements 11.  When I have applied the zoom, but go to right click on the picture frame, it does not allow me to change the time.  It stays on 100.  It will only allow me to change actual video clips.  Does anyone know how to really slow down the zoom on a picture frame, or a way to use the Time stretch like I could do in Elements 7?  Thanks!

    jshook525
    I do confirm your observation on the Time Stretch Speed %/Duration available fields for a still in Premiere Elements 7 vs 11 Presets Horizontal 640 x 480 Zoom In.
    If you want to go with Presets rather than manual keyframing of Scale property in Motion Panel expanded, then...
    1. Given your 5 second still on the Timeline.
    2. Drag the fx Effect Horizontal Image Zoom/640 x 480 Zoom In into the 5 second still on Video Track.
    When you do that two Scale keyframes are automatically placed at the beginning and end of the  5 second clip.
    3. Change the duration of the clip, with one of the following
    a. click and drag to the right the right edge of the clip to increase its duration
    or
    b. right click the clip, select Time Stretch, and set the duration to the increased value....if you had been in 7 the Speed% = 50,
    then the duration you would find is 10 seconds (00;00;10;00). Here no Speed% visible opportunity, just set the duration = 00;00;10;00.
    c. go to Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, and move the 2nd Scale Keyframe to the the right. In this
    example at the 10 second mark, the new duration of the clip.
    "Presets" has its limitation - pan or zoom instead of pan and zoom, and other. In what needs to be done here, it probably would have been quicker
    just to do the Scale keyframing yourself in Motion Panel expanded with the Toggle Animation technique Scale (for Zoom) and Position (for Pan).
    There is more to all this, but for now let me know if any of the above could get your through to your goal.
    Thanks
    ATR

  • Lost transitions after time stretch video texts

    How do I get back to the original project I opened to work on?  I realized the text duration was 5 sec and needed to be 6 sec.  I used the Time Stretch on the text title to increase about 30 text titles by 1 sec ea.  I rendered and saved in batches of 10.  Results were that the transitions between scenes "went away."  I then replaced these transitions, rendered and results were Text titles were moved.  This is a mess and I want to start from where I left off  Please help.  Thank You :-)

    You can try to open one of the auto-saves, in the sub-folder in the same folder as your project file.
    But meantime, don't time-stretch a title to extend it. Just stretch it longer on your timeline.

  • Time Stretch Without Ripple APE-11

    APE-11
    I am working on a video with B-roll. I have 15 pictures in track Video 3. I want to make them be on screen longer using Time Stretch. My  problem that when I stretch a picture all the rest ripple to the right now our of place. I tried holding down Control but then Time Stretch does not work.
    How do I expand pictures without Ripple?
    Than k you all and Cheers! Phil

    Phil
    Please give the following a try while I think about alternatives.
    Take your mouse cursor and drag out the right edge of the still to increase its duration. You can use the timecode pop up to determine the extent of the increase.
    If you have other stills to the right of this one and not side by side and space to spare, they should not move when you increase the duration of the clip as suggested above.
    Looking forward to your results.
    ATR

  • Looking for an application that has great time stretch capabilities

    Hello all,
    I have Logic Pro 8 and I am still learning its capabilities. I do alot of sound design stuff and am looking for a spectacular time stretching application. I've fiddled with Logic's time stretch algorithms but so far I'm not thrilled with the results. I'm interested in really stetching things out to create new sounds. Here is a great example from Nine Inch Nails. It's a remix of Eraser off of Further Down The Spiral.
    This particular remix version is called "Erased, Over, & Out." Here is an amazon link to have a listen.
    http://www.amazon.com/gp/product/B000VZOBGI/ref=dmmu_dptrk11?ie=UTF8&qid=1212078077&sr=1-1
    The vocals are EXTREMELY stretched out and take the form of a pad almost.
    He is actually saying, "Erase me." Keep in mind the original vocal is only about 3 seconds long. I'd like to provide that example but the Amazon sample isn't long enough to get to that part. Maybe download it to listen. It's called Eraser, it's from "The Downward Spiral" album. (1994)
    Now, does anyone know if Logic is capable of getting this good a result like the sample I provided? I've seen PT Elastic Time stretching capabilities and it sounds awesome, at least what I've heard from their demo video on elastic time. Can the same results be achieved in Logic Pro 8?
    If not, what plugin do you recommend that could achieve this EXTREME time stretching stuff. Or, does anyone know what Nine Inch Nails used to get that effect on the vocals for that particular remix? I just think it's a limitless tool for sound design, but right now I'm feeling limited in the sound quality department. I know I can keep stretching and stretching and stretching the sample region but that sounds a digital mess when I get it to the point were I want it, so please, don't suggest I do that, unless you know a way to make it sound REALLY GOOD in Logic using the algorithms that come with the program. Step by step info would be lovely.
    Thanx in advance...
    TTW13

    ported to the Mac
    it's on my other Mac
    is their a Mac version?
    It seems a safe bet, eh..?
    I'm pretty sure the mac link was posted to that thread I linked to, it's where I found out about it...
    http://www.bigbluelounge.com/forums/viewtopic.php?t=35638&highlight=&sid=c2dcbfd c2af80e0fdf9da04b91319e1d

  • Where is the time stretching butten that makes it easy to time stretch with the cursor in premiere elements 13 ?

    Why doesn't preimere elements have the option to trim the clip but the triming is in a matter of fact of - time stretch ?  In premiere elements 10 there was a butten you could press and the curser became a trimer for time stretching.  If there is an option like this in 13 I'll be happy to hear about.  Thanks,  Oren

    Oren
    What computer operating system is your Premiere Elements 13 running on? Background information for now.
    In Premiere Elements 13 Expert workspace, you can access Time Stretch from the Tools Menu or use the keyboard shortcut Ctrl+R to bring up the Time Stretch dialog.
    If you are interested in creating slow and fast motion effects, also see Time Remapping feature found under that Tool Menu.
    As for the Premiere Elements 10 Timeline workspace, there is an icon (Time Stretch Tool with the keyboard shortcut X) I see no such icon in Premiere Elements 13.
    Clicking on that icon in 10 will allow you to increase or decrease the duration of the Timeline video selected. And, if you go into the Premiere Elements 10 Edit Menu/Keyboard Customization, you will find a "Time Stretch Tool" command with the given keyboard shortcut X. At least, I do.
    Even if I try to trigger a hidden "Time Stretch Tool" in 13 with the "Time Stretch Tool" shortcut X, I cannot. And, there is a Premiere Elements 13 Edit Menu/Keyboard Customization/ command Time Stretch Tool with keyboard shortcut X.
    As for whys in Premiere Elements 13, you would need to take that up with Adobe who decides on the feature set for a given version. This is a user to user forum.
    If you want to file an Adobe Feature Request Bug Report Form, you can use the following link
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
    I have found some interesting hidden commands/keyboard shortcuts with exploration and experimentation. So, I may do some more exploration on this to rule in or out
    any possibility of a hidden Time Stretch Tool feature in 13.

  • Fast forward time stretch effect / blurring / MOV

    Hello friends,
    So I did an entire 3 minute video using a time stretch effect (fast forwarding, time elapse) to match a voice over.
    I saved it out as FLV so that the client could proof it. All was good so I wanted to provide an MOV file in H264 to increase quality / make Apple compatible for You Tube viewing.
    When I did, the FF time stretch video really blurred and pixelated in the video.
    Does anyone have a suggestion for a codec or something that might reduce the amount of dragging / pixelation / bluriness? (That of course has high quality)
    Video was shot using a Canon Vixia HFS30.
    Thanks in advance! 

    Hi Bill, Steve,
    I'm hoping you can shed some light now that I can actually show you what the issue is here with the fast forward motion effect. I've put two files I've uploaded below. Same issue on both.
    The fast forward effect is on from 0:00 - 0:45
    Quiktime, H264 -
    http://youtu.be/Vs7u0kQ0hVQ
    Also, can you tell me why the MOV files don't seem to fill the frame?
    Flash, FLV
    http://youtu.be/lfnci6Enxkk
    As you can see, the higher you set the resolution, the more pixelated I become.
    Any help you can offer is appreciated.
    Thanks

  • Time stretch to slow down motion

    I am using Adobe Premiere Elements 7. When I use the time stretch to slow the motion down, my final motion is very "jerky". Any way to smooth that out a bit better?
    Thanks,
    Bruce

    How does the Slo-mo footage look in Preview?
    Also remember that you are basically doubling the number of Frames.
    This might also be of use for improving the results:
    Set field options for imported interlaced video
    In most video, each frame consists of two fields. One  field contains the odd‑numbered lines in the frame, and the other contains the  even‑numbered lines. The fields are interlaced, or  combined, to create the complete image. Adobe Photoshop Elements includes a  reverse field order preset for video imported from a hard disk or Flash memory  camcorder that uses upper fields first. If your footage was captured with  reverse order fields (upper fields first), make sure your project uses either  the Standard or Widescreen preset from the Hard Disk, Flash Memory Camcorders  presets folder. (See Create or change project  presets.)
    Ordinarily, interlacing isn’t apparent to a viewer. But because each field  captures the subject at a slightly different moment in time, playing a clip in  slow-motion, creating a freeze frame, or exporting a frame as a still image  makes the two fields discernible. To avoid this, you can deinterlace the image. Deinterlacing eliminates one field and  either duplicates or interpolates the lines of the remaining field.
    Reversing the field dominance, the order in which the  fields are recorded and displayed, may also cause playback problems. When the  field dominance is reversed, motion appears jerky because the fields no longer  appear in chronological order. Fields can become reversed when the field  dominance of the original videotape is the opposite of the field dominance of  either the video‑capture card used to capture the clip or the video‑editing or  animation software that last rendered the clip. Reversing can also happen when  you set an interlaced clip to play backward.
    To avoid these complications, you can deinterlace the  image. Deinterlacing eliminates one field and either duplicates or interpolates  the lines of the remaining field. You can also set field options for an  interlaced clip so that the clip’s picture and motion quality are preserved in  situations such as changing the clip speed, exporting a filmstrip, playing a  clip backward, or freezing a video frame.
    Select a clip in the Timeline, and choose Clip >  Video Options > Field Options.
    Select Reverse Field Dominance to change the order in  which the clip’s fields appear. This option is useful when the field dominance  of the clip doesn’t match your equipment or when you play a clip  backward.
    For Processing Options, select one of the following  choices, and click OK.
    None
    Does not process the clip’s fields.
    Interlace Consecutive Frames
    Converts pairs of consecutive progressive‑scan (noninterlaced) frames into  interlaced fields. This option is useful for converting 60‑fps progressive‑scan  animations into 30‑fps interlaced video because many animation applications  don’t create interlaced frames.
    Always Deinterlace
    Converts interlaced fields into whole progressive‑scan frames. Adobe  Premiere Elements deinterlaces by discarding one field and interpolating a new  field based on the lines of the remaining field. It keeps the field specified in  the Field Settings option in the Project Settings. If you specified No Fields,  Adobe Premiere Elements keeps the upper field unless you selected Reverse Field  Dominance, in which case it keeps the lower field. This option is useful when  freezing a frame in the clip.
    Flicker Removal
    Prevents thin horizontal details in an image from flickering by slightly  blurring the two fields together. An object as thin as one scan line flickers  because it can appear only in every other field.
    Good luck,
    Hunt

  • Time Stretch tool won't stretch?

    I have a sound effect of an explosion (pulled off web) that I need to time to a visual. The explosion audio is over too quickly, so I need to stretch it. Trouble is, when I click on the time stretch tool, my audio won't stretch beyond it's starting value. I can use the tool to shorten it just fine, but why can't I stretch it longer?
    Any help would be appreciated.

    I'm sorry, Milo, but if you captured your HDV video over Firewire connection, set up your project for HDV and you're using a 44.1 khz WAV file, you should not have to stretch the audio or the video.
    It's possible, I guess, that you're using such an old version of the program (and possibly an older computer) and that it's having trouble playing high-def video at the same speed as it plays your audio. That would mean that they're still in synch -- they're just not playing back in the program at the same speed.
    The test for that would be to use Share/Computer/WMV to output your movie (or a portion of it) as is (without changing either the audio or video speed) and seeing if it still loses synch. It really shouldn't.

  • Clips shift position on timeline when using time stretch

    Premiere Elements 10, Win 7 x64,
    I put together a timeline that had four video tracks. When I added a fifth track I started having problems. Specifically, when I put a still image or video clip onto the fifth track and then used time stretch on that newly added clip, the existing clips on the third and fourth tracks shifted their position on the timeline in response to the time stretch applied to the clip on the track above. Why does this happen? I would expect the clips on the lower video tracks to NOT move position in response to a time stretch change to a clip on a track above. How I can I get them to stay put while manipulating the duration of clips on the tracks above them?
    Thank you for any insights.
    I have attached three images to make what I am experiencing more clear than perhaps my words describe above.
    (top) Image 001: timeline before any change
    (middle) Image 002: timeline after adding video track 5 and adding a still image to that track
    (bottom) Image 003: timeline after applying time stretch to the still image clip on track 5, showing shift of clips on tracks 3 & 4

    When Adobe was designing the operations on the PrE Timeline, it was determined that the majority of users WOULD want the Ripple. That does seem to be the case. The addition of the Ctrl/Cmd modifier key accommodates those users, or those instances, where the Ripple is not desired.
    Interestingly, PrPro, PrE's "big-brother" does things in the opposite order. The user holds down the Ctrl/Cmd key to GET the Ripple. The designers figured that the users of PrPro would have different desires, than those of PrE. As I use both programs, I have to keep reminding myself which program I am using at that time - to get the Ctrl/Cmd modifier key working, as I wish, in each program - just the opposite of each other.
    Good luck,
    Hunt

  • Time stretch audio file to match tempo of track

    Hi everyone, I am a new user of Logic express, and have found the info on this site extremely helpful, in conjunction with SFlogicninja's tutorials on youtube.
    However, after watching a recent tutorial on Time stretching audio, i am now completely confused. Similar to the tutorial, i am trying to fit an audio region(an acapella track) to the tempo of the project. I have beat mapped the region to establish a tempo, but would like to experiment with slowing down or speeding up the track as a whole. As the acapella was created outside of Logic, i am bouncing the acapella track in order to be able to 'follow tempo'(as shown in the inspector). I have disabled the 'normalize' checkbox and bounced, but the bounced track still does not have the 'follow tempo' option in the inspector.
    Any ideas as to why my bounced files cannot follow tempo. I can do it with audio that i create in Logic, but if i import any files, i was under the impression that by bouncing it within Logic, i could still obtain the same results?
    I'm running out of hair to pull out!

    Lennysapple wrote:
    Oh really, it is supposed to be fixed in v 9.1.7
    Then I'll have to give it a try.
    Hi 
    Seems to work OK here
    Lennysapple wrote:
    Did I understand correctly that just by ""renaming"" Logic 9.1.6 inside the application folder it will keep it functioning in case I wanna revert to it later??
    Yep (but you will probably still need one called "Logic Pro" to get Software Update to see it)
    I have mine setup to quickly switch from 32bit to 64 bit (2 copies with different names) and also previous versions.... works fine
    CCT

  • Looking for a time-stretching app

    Can you guys recommend your favourite time-stretching app? I'd like to find an easier way of lining up transients to beats, for example.
    Thanks,
    Shaun

    Logic Pro 8 is also the application to use for time-stretching though!
    See page 525 *Time Stretching Regions* in the *Logic Pro 8 User Manual*.
    shamca wrote:
    I know the marquee tool, but I don't see how it can be used to time stretch ?
    However, from your original post, now I'm thinking you don't really mean simple time stretching, but you mean doing something more like quantizing audio. Actually, I do use the transient capabilities of the marquee tool to find note beginnings and then move them to a bar location, which actually is a form of audio quantization.
    However, Logic also has an audio quantize feature.
    Check page 517 of the *Logic Pro 8 User Manual*. I have used this with varying amounts of success.
    If you own Ableton Live, it has a better method (IMHO) for quantizing audio by doing something they call "warp markers". With Live, you simply place a warp marker on each transient (note start) that you wish to move, and then move it to the desired bar location. Live then time stretches your audio to match. Because it requires you to select these places, it is more seamless and has less artifacts than the algorithmic method in Logic. Still, if I only need to move a few note beginnings, I prefer to just stay in Logic and do it with the marquee tool.

  • Time stretch has stopped working in Premiere Elements 13.

    I've downloaded the latest Adobe updates. I am using a Windows 8 64 bit computer. I have previously (in the last few weeks) used time stretch to speed up and slow down without any problems but now I can't get it to work in any of my projects. All video files shot with an iPod Touch or iPhone. Has anyone else had this problem? Any ideas on how to fix it?

    Chris
    As a point of reference for your Premiere Elements 13 question, I have a iPod Touch 4th generation (H.264.mov 1280 x 720 @ 24 progressive frames per second), and I have no problems using Time Stretch or Time Remapping in a 13/13.1 project or other versions.
    I would invoke the interference of a possible variable frame rate rather than a constant one involved with your particular type of video (from iPod or iPhone) and Time Stretch, but I am not having any problem with my iPod Touch video (with minimal variable frame rate) and Time Stretch in Premiere Elements. If you want to explore that idea further, you could convert your video's variable frame into a constant one using the free HandBrake program. Then import HandBrake's  H.264.mp4 export into your Premiere Elements 13/13.1 project and determine if you can then apply Time Stretch to that clip.
    Have you applied the Shake Stabilizer to your clip before trying to apply the Time Stretch? For that matter, what effects, if any, have you applied to your video clip before trying to apply Time Stretch to it?
    All of the above is based on Time Stretch no working for you in a new project with new source media.
    ATR

  • Why can't Adobe Premiere Pro CC 2014 Time remap Audio and Video together?

    In case you didn't notice, my question is WHY.  I don't know why Premiere Pro can't do this.  From what I understand at the moment, the only way to time-remap audio in any way shape or form using Adobe software is through Adobe After Effects, which my computer has absolutely no chance of running ever.  I know how to do regular stretching of audio in both Audition and Premiere Pro, but apparently I can't time-remap audio using either of these programs.
    So why can't Adobe Premiere Pro time remap audio along with the video?  What's the reason that it can't?  It's a massive disappointment and would be very impressive to see accomplished in the future.  If it's possible to time remap audio and video together in After Effects, that's great and all, except for the fact that I can't use that program.  Why can't it be done in Premiere Pro and will it ever be possible in Premiere Pro?
    Also, will time remapping audio become possible in Audition someday?

    That sounds like a great idea.  File a Feature Request:
    Adobe - Feature Request/Bug Report Form

Maybe you are looking for