Time Tracking System

I attempted to install the Time Tracking System from the Oracle Application Express Studio site and was not successful. It did not load all of the required tables for which to load the xml files into. Any help on this appreciated.
John

John,
Were any errors reported during the installation?

Similar Messages

Display of Column Headings in Time Tracking System

Hi
In Time Tracking Application, instead of displaying the Day of the week like
MON, TUE , Wed, Thu, Fri , Sat, Sun
iS it Possible to display along with the date like below in the column headings based on the week
selected?
Mon TUE WED THU FRI SAT SUN
03 04 05 06 07 08 09
Can any one helo me on this regard.

Hi,
Please check if you are created the elements for the dynamic node and corresponding attributes are set.
if you want to display the corresponding column heading in the dynamic table you should use ResultSetMetaData, like retrieving of data from table using ResultSet.
ResultSetMetaData rsm =(ResultSetMetaData)st.executeQuery("select * from <Table_Name");
IWDTableColumn tabColumn1=(IWDTableColumn)view.createElement(IWDTableColumn.class,"Column1");
IWDCaption column1Cap=(IWDCaption)view.createElement(IWDCaption.class,"column1Cap");
nameCap.setText(rsm.getColumnName(1));
tabColumn1.setHeader((IWDCaption)column1Cap);
like this you can add columns to table and set column headings.
regards
karthik

TRACK SYSTEM IDLE TIME

Hii Guys,
I am working on a client server architecture based project named "ATTENDANCE TRACKING SYSTEM".
For this, I need a java program that can run in background(without any interface) and track system idle time on client machine.
The idle time is the time elapsed since last key was pressed or since last time mouse was moved(whichever is later).
So that, i can use the output of that program to track the idle time of the client machine.
I searched a lot, but everywhere i found to use JNI. But i dont know anything yet about JNI.
Please help me out...

Prince_2188 wrote:
Thanxx 4 ur reply Mr. Jschell
But the problem here is that i will have to do it in JAVA, as i have been asked by Wipro Technologies to do it in JAVA.Probably not a good idea to name names.
The requirement is stupid.
And given that the requirement is not negotiable you might want to review the contract/requirements before going further. Because using JNI is not using java. So what makes you think that that doesn't break the contract?
>
On Internet, i found that doing this task purely in JAVA is not possible and i will have to do it using JNI and C++.
But i dont know how to use JNI and moreover i could not find coding for the same on Internet.
Secondly, i m not aware of the functions in Windows API that can help me out in this regard....
Go to a windows site and ask about what API one would use to monitor idle time. Do NOT mention java. Just ask about the windows API.

E-Mail Tracking-System

Hi,
I have an idea to create an E-Mail Tracking-System to analyze how many E-Mails are opened which have been send before.
Without APEX I would display a very small image in the e-mail, which would only be displayed when the e-mail is opened. Then I have to look how often this image have been load from the server.
That is not so easy to report and I think it would be easier if I can use APEX.
But I don`t know how to recognize with APEX whether an e-mail is opened or not? Can do this with an image too and would it be displayed in an APEX-View or something like that?
I would be very glad for any help on this topic.
Thanks,
Tim

Guys,
I think the images that the original author is talking about inserting into the sent newsletter is what's called a "webbug", an HTML reference to a tiny image file that resides on his HTTP server. Every time the reader opens the email with the image reference, assuming the email client will automatically display remote images (which Thunderbird doesn't), the HTTP server registers the reader's IP address.
It's been around for years and personally I think it falls somewhere between legitimate marketing and spam, depending on how it's used. I'm not a real fan, frankly.
But his technical problem is he doesn't know how to read the HTTP server's hit log from Oracle. I also think he doesn't understand enough about Apex to distinguish between Oracle and his HTTP server log.
I don't know how to read the log that tracks the "hits" either. I don't think the question is really an Apex one, but more generic.
Just trying to clarify the need,
Stew

Time tracking problem

Hi there,
I have created application for employee time tracking using oracle forms 6i...My problem is,The application doesn't work during the abnormal shut down..I have no idea to how to track the point of abnormal shut down..
Is any trigger to solve this ?
pls help me

Reading up on system event triggers should give you some ideas:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/triggers.htm#sthref3268

Session Out Error in Status and Tracking System (BPS) Execution

Hi,
I am getting the Session timed out error in Status and Tracking System (Open Planning). The reason I found is:
In STS (Configuratioin) the web link that I have added is valid for one time. Meaning that ever time I visit Web Interface Builder (Execution), it is generating a different web link. Therefore, it is only valid for a single time.
Is there any way, that I can make the web string that is generated every time I visit Web Interface Builder (Execution) for a particular report, so that I can use that web link in the configuration of STS (Open Planning). In this case the web link every time that generated is dynamic.
But, this is not the case with Open Report. I prepared a query and attached the web link of the query into (Open Report). The number of times even if I open the report, there is no issue as the web link is static.
Any inputs on this will be appreciated.
Regards,
Ravi

Hi,
This has been solved.
In STS Configuration the web link (URL) that is to be inserted is not the web link that has dynamically generated. However, it is the web link (URL) on the Web Interface Builder (WIB) - Property - URL BSP Application.
If you use this URL in the STS (Open Report), this will ask the User for User ID and Password to reach that Web Planning Layout and a dynamic code will then be generated. Every time, user visits it generates new dynamic URL.
Anyway, Thanks in advance.
Regards,
Ravi

Status & Tracking system History

Hello Everybody,
I have a special situation here. I need to show my clients my Status and Tracking system history. Let me give u a mudane example,
A cost center account undergoes twice budget changes both the times with the 'accepted' status. I should show the client in a report when and what amount has this account undergone during the two budget changes like this
Account   Changed on     Changed amount   Approved by              Requested by
23423       14.05.2007          100000           Thomas Escher          Wolf schere
23423       13.06.2007          120000          Thomas Escher          Wolf schere
My question,
Do status & tracking system hzas table where i can get this information. !?
If not do you have any other approach on mind for this issue!?
Any idea is highly appreciated,
Regards & many thanks indeed,
Karthik

STS data is contained in tables starting 'UPS'.
However, the STS history is not going to show which accounts changed, by whom, I think. It can show the status change history by user for a planned unit. (Click the 'Present status' link in the STS. )
If you want to see which user changed particular values you would have to set the BPS model to record the user id and date/time; it could generate very large amounts of data.

Time Tracking Software

Hope no one minds a topic that really is a bit too general for a Java Forum. It's just that I really value this community's advice.
Have you worked for teams that used time tracking software? Which ones and how'd you find them in terms of red tape vs. visibility into how much multi-tasking and priority switching is going on.
I feel fortunate to work with a team that switches tasks on a dime, and a management team that is willing to look at some level of detail. I can always explain what we switched who to and why, but I'd like to do everyone the favor of skipping the narrative and providing something formal.

Thanks Chuck. Definitely not looking for minute by minute! I just want to demonstrate in a formal report how each staff is contributing to multiple systems. For example, it'd be useful to show specifically how short-term need A was prioritized and took a share of time from long-term need B or how Project A was eclipsed by new higher priority Project B. Half-day or quarter day increments are probably sufficient. I want something that doesn't feel like red tape. One to two minutes a day is all I expect a worker to invest. I'm downloading a Track-IT demo for starters.

Oracle HTML DB Tutorial: Building an Issue Tracking System with Oracle XE

Hello.
I am using Oracle XE and have loaded the sample Issue Tracking System.
I had to set the time-out to 100 seconds as explained in the Oracle XE thread: Problem with importing HTML DB applications (Problem with importing HTML DB applications
I am trying to create users.
The documentation at http://www.oracle.com/technology/products/database/htmldb/pdf/issue_tracking_tutorial_1.6.pdf
on page 82 discusses using HTML DB authentication. However, my understanding is that the HTML DB in Oracle XE currently uses only DATABASE authentication.
Is there any documentation on creating users for the sample Issue Tracking System using Oracle XE?
Thanks!
-Ricky Burke
[email protected]
972-235-5665

Ricky,
I am trying to create users.
The documentation at
http://www.oracle.com/technology/products/database/htmldb/pdf/issue_tracking_tutorial_1.6.pdf
on page 82 discusses using HTML DB authentication. However, my understanding is that
the HTML DB in Oracle XE currently uses only DATABASE authentication.Well, in order to log in to the XE management GUI you use the database account. This is correct.
But for authenticating to the application you are going to build, you still have all possible authentication schemes available as in HTML DB (standalone).
Well, you should be able to just go ahead and create the HTML DB users in your workspace (for example HR). In XE a workspace corresponds to an actual Oracle database user, a workspace is created implicitly for the user.
Thus, just go to Home > Application Builder and will find on the right hand side under "Tasks" the link "Manage HTML DB Users".
There you can create the users in your workspace for your application.
~Dietmar.

How to use MS Project in conjunction with a time-tracker tool

In my new job, the company is using a time-tracking tool in a very strict way.
Allow me to explain...
Let's say the project has two phases: Ph1 and Ph2.
Ph1 starts on day 1 and effort is 5 days.
Ph2 starts after Ph1 and effort is 10 days.
There are 3 resources available, R1, R2 and R3, and after a careful estimate of skills and avilability it has been decided the following:
- Ph1 is assigned to R1 from day 1 to day 5, resulting in a duration for Ph1 of 5 days.
- Ph2 is assigned to...
...R2 from day 6 to day 10
...R3 from day 8 to day 12
resulting in a duration of 7 days.
The above is mapped into the time-tracking tool to allow each resource to track time against Ph1 or Ph2 only in the aplanned timeframe. That is: R3 will be able to track
hous aganst Ph2 only from day 8 and only till day 12. That is to avoid that resources track more time that what was originally allocated: if this is necessary, it must be explained why, a new plan must be calculated and more budget must be allocated. When
the ok is given, the tasks in the time-racking tool will be changed accordingly.
If the above situation is clear, my question is: how would you model this in MS Project?
If the WBS in MSP is simply
1. Project X
1.1 Ph1
1.2. Ph2
when allocating R2 and R3 to Ph2, how can I specify that R2 will work only from day 6 to 10 and R3 from day 8 to 12?
At the moment the only clean solution I found is to go into the task usage view and adjust, for each day, the working hours of each resource assigned to the activity.
A second less clean solution is to have a WBS like follows
1. Project X
1.1 Ph1
1.2. Ph2
1.2.1 Ph2.R2
1.2.2 Ph2.R3
that is split Ph2 into two sub-activities, one for each resource.
Thanks fo any help.

Thanks a lot to both of you for your suggestions.
Unfortunately the time-tracking tool cannot be changed: it is a new SAP based tool deployed worldwide.
The problem is that each project involves different teams from differnt countries for a fixed "budget" (or a fixed number of man-days). Therefore there is a global PM in London that will define in the time tracking tool
a WBS like this
1. Project X
1.1 Analysis
1.1.1 Analyse impact for team in Rome
1.1.2 Analyse impact for team in Amsterdam
1.1.3 Analyse impact fr tam in Bangkok
1.2 Development
1.2.1 Develop A
1.2.2 Develop B
1.2.3 Develop C
1.3 Customer Acceptance Test
1.3.1 Prepare test environment by team in Amsterdam
1.3.1 Test by final user
1.3.2 Support user testing by team in Rome
then he would assign the development tasks to the rsources that are supposed to work on it and for only the estimatd time. The reason is easy: he want to make sure that a resource tracks time only against the task she is supposed t work on and for only the
estimated number of days, to avoid exceeding the budget. If extra effort is required for a resource on a task, before allocating more time on that task, a long battle will start.
This we cannot change.
The problem now is on our side, the teams in Rome/Amsterdam/Bangkok: we must keep our own plan in MSP. Our tam in rome is divided in 4 sub-teams, one for each module of the core product, each team with a team
leader assiging tasks to resources with Asana. Untill las week, for months, there was not PM in Rome leading the four teams and hand and of course there was no global plan for the tasks in Rome.
My first attempt was to try with a Gantt that would stop at phases level, without going down to task level, that are under responsibility of the 4 team leaders. the reason being that we have something like
25 projects, some with dependecies with each other. I simply wanted to avoid having one huge MSP file with all projects down to task level: by experience, in my previous project (an ERP upgrade for Oracle EBS in FAO) this approach did not work very well.
But this is bringing up he problem I described: if I stop at "1.2 development" in the WBS, than when I assign R1 and R3, to mak sure their effort is planned accordingly to what has been setup in the time-raking
tool, I need to edit work in the task usage resource by resource, activity by activity.
The other option is to insert under 1.2 development another level with all tasks from Asana, each task being assigned to one resource:
1.2 Development
1.2.1 Develop A
1.2.1.1 Develop class x (by R1)
1.2.1.2 develop class y (by R3)
1.2.2 Develop C
1.2.2.1 Develop new pricing interface (by R4)
1.2.2.2 Modify all logos (by R7)
A third option would be to have one dtailed plan for each project down to the Asana task and then one higher level plan summarising all projects, down to phases only.

Connecting with external time recording system

Hi, I need to know how an in-house Java Time Recordins System can communicate with SAP. The plan is for this system to send raw data, clock in, clock out to SAP work schedules. Employees are mostly positive and have occasionnaly shift differentials, similar to additonal payments. Apparently this upload to SAP seems to be a problem. Can someone advise. I am a HR trainer not a functional but I need to know the process inside and out to be able to train on end result.
a.s.a.p. if you can.
Regard,
Sylvie

Amit, this sounds like a good solution.
Our external system captures raw data (swipe cards time)
→ this data is extracted by "text file report" and uploaded to
→ BAPI, where we can do some config so that SAP can understand it all, the way we want it.
Once in SAP it will just follow whatever work schedule rules has been configured. Is this about right ? Remember I am a trainer not functional. Is BAPI = to BDC ?
Regards

Document for configuring Early watch alerts And issue tracking system

Hello Experts,
Iam on SAP Solution Manager 4.0 and need step wise step procedure document for configuring Early watch alerts and Issue tracking system in solman 4.0 . I hv checked Help site and other standard config docs by SAP but getting confused and things are not working ,so help shall be appreciated.
My Email id is [email protected] .
Requested to revert at earliest as iam in urgent need of it .Points guaranteed.
Thanks and Regards,
Somya

Hi Somya,
setting up EWA is explained in Application help of SAP Solution Manager.
It would be helpful to know, what you have already done and what is causing problems for you.
Prerequisite to process EWA is to configure all steps described in the Basic Settings of SAP Solution Manager Configuration guide (tx SPRO).
The configuration of Issue Tracking is also described in the IMG (Basically, it's required to activate a BC Set).
Path in IMG: Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Basic BC-Sets for Configuration -> Activate Issue Tracking BC Set
Access the configuration guide:
- run transaction SPRO
- choose SAP Reference IMG
- expand tree SAP Solution Manager -> Configuration -> Basic Settings
- follow the steps under
"Wizard-based Initial Configuration of Basic Settings", if your SolMan system has not been yet configured or
"Standard Configuration of Basic Settings", if you have done already some configuration.
Best regards,
Ruediger Stoecker

Time Machine System Restore Help

I need help with the following problem with Time Machine.
I am attempting to restore a OS 10.5.8 system on a G5 Tower.
When I startup the G5 Tower from the startup disks, I goto the RESTORE SYSTEM FROM BACKUP utility in the Utilities menu. From there the Time Machine system restore does nothing at all.
The TIME MACHINE back up is on a USB external drive. This is a backup of the G5 Tower time machine backups - not another system.
As a testing procedurre, I take the Time Machine external USB drive, plug it into my Mac Mini 1.83 Ghz, start up the mini from the startup disks, select the RESTORE SYSTEM FROM BACKUP utility, and TIME MACHINE goes through the prompts fine checking what date you want to restore from.
Does anybody have any experience with this problem - any info helps.
Thanks.

I have never heard of this - it does sound unsettling. I'm not sure how to fix it so that the G5 sees it, but you might try this:
-Boot your G5 while holding down T
-Hook the G5 up to the Mini with a FireWire cable
-Boot the Mini up from your Leopard DVD
-Select Restore from Backup from the menu
-Pick which backup you want restored
-When it asks you for a destination disk for the restore, choose the G5's disk

How to install elance Tracker System on archlinux?

Hi guys, anobody here knows how to install elance Tracking system on archlinux,
Elance only provide rpm and deb packages,
I tried to use rmp2targz and deb2targz, but don't work, I also checked this video:
http://www.youtube.com/watch?v=XirJietlTfI
and it worked, bit I get an error saying that I need to install adobe air, but I already have installed
can anybody please tell how to install this package??
the package can be found at:
https://www.elance.com/php/tracker/main/trackerDownload (must be logged in on elance),
I uploaded the packages to mediafire if you want to check them out:
deb package
http://www.mediafire.com/?ad9x1h19m8kvomi
rpm
http://www.mediafire.com/?gshoa6cu4odcrt3
I did a PKGBUILD:
pkgname=elance-tracker-system
pkgver=current
pkgrel=2
pkgdesc="Elance tracking system"
arch=('i686')
url="https://elance.com/"
license=('unknown')
depends=('libidn')
makedepends=('rpmextract')
options=('emptydirs')
source=("TrackerSetup.rpm")
md5sums=('356798ce170a942e0fbb3ed5e6243e65')
build() {
cd "$pkgdir"
rpmextract.sh ../TrackerSetup.rpm
and it works, but when I try to run Tracker, it says:
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
Notice that I already have installed adobe-air and adobe-air-sdk
kind regards.
thanks
Last edited by pahko (2012-05-23 04:20:28)

adamrehard wrote:Could you please post both your PKGBUILD and the error message concerning Adobe Air?
Sure, thanks, I update the post, but here you have:
PKGBUILD
pkgname=elance-tracker-system
pkgver=current
pkgrel=2
pkgdesc="Elance tracking system"
arch=('i686')
url="https://elance.com/"
license=('unknown')
depends=('libidn')
makedepends=('rpmextract')
options=('emptydirs')
source=("TrackerSetup.rpm")
md5sums=('356798ce170a942e0fbb3ed5e6243e65')
build() {
cd "$pkgdir"
rpmextract.sh ../TrackerSetup.rpm
the error:
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
Notice that I already have installed adobe-air and adobe-air-sdk
Last edited by pahko (2012-05-23 04:20:14)

Every time my system updates I get system extension error messages.

Every time my system updates I get system extension error messges. It reads that certain extensions could not be loaded/used which seems to be an apple issue. Unfortunately, unless you have apple care there is no way to contact them. I am on LION and my updates are current. Is anyone else having this issue?

A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

Time Tracking System

Similar Messages

Maybe you are looking for