Time-Zone Help. User Time Zone and SAP Time Zone!

Hi Experts,
Guys, I want to know how to check and change time in SAP system. The reason I want to know if when I go to su01 and display my user, under Default tab>> Sys. Time Zone is different. So, I am guessing that I have to change time zone which is causing my CCMS-Alert auto-reaction.
Thanks,
I will reward points.

Hi Prince,
Cool!! Just wanted to confirm and clear things up.
1. My OS time is PST and upto date. I have checked by typing date in unix.
2. As you have mentioned (Txn STZAC). I think STZAC is a T-code in which I can change time zone but what is Txn? Also, when changing time zone, do I have to make client modifiable in se06?
3. As you have also wrote that I can add (TIME_ZOME) in parameter of Auto-reaction Z_method. Just to confirm, is that how I will add.
Parameter Name: Time_Zone
Parameter Value: PST
on the Parameter value, do I need to add any syntax or characters such as $PST, (pst) etc...
Thanks for your help!

Similar Messages

Creating User in Portal and SAP Backend simultaneously?

Is it possible when you create a new user for the portal (in my case, active Directory is used as central user storage) for SSO, that this user will also be created simultaneously in different SAP Backends without creating it manually everytime? Or is it perhaps possible to connect Active directory to these SAP backends as central user storage, too? My Problem is that everytime I must create manually the users in portal and all belonging SAP backends but I think it's not very comfortable.
Regards,
Frank

Hi Frank,
There are ways to integrate complete User Management where either SAP or the local LDAP (i.e. MS ADS) drive as the central store for users. Ultimately, the CUA concept can be entirely driven by SAP including the MS ADS ID's for the network. It involves a proposal that is uploaded into the ADS which includes the SAP required schema. When populated (or if configured as such) they can be applied as user properties for the backend systems. There is a tool within R/3 called LDAPSYNCH that allows the replication (either direction) of user data.
This concept is referred to as Identity Management. Start at http://service.sap.com/security. Then go to "Security in Detail" ==> "Secure User Access" ==> "Identity Management". There you can find info/docs on the CUA concept within the SAP landscape as well as the integration into the corporate LDAP.
I have seen most customers use separate R/3 backend User Management from the ADS. I assume that this is due to the complexity of adopting a whole new global user management process with existing "cultured" processes. However the SAP systems can support the entire corporate user management driven from within the R/3 core (HR).
I hope that this helps,
Regards,
Judson

GRC User ID's and SAP UME

Hello,
We have a 50 User id's ECC system and we have created a set of user id's in GRC
(like riskowner, roleadmin Approver).
Few Queries are:
1) Do i need to create existing User ID's in SAP GRC UME?
2) If NO then how user will request for a Role access in CUP by using which user id he will login in GRC?
3) For Eg: If a FINANCE Manager has a ECC user id and he wants to approve a Role can he login using the ECC user ID in CUP?
Thanx in Advance
Regards,
Kumar Rayudu

Sorry Kumar but this statement got me confused:
"We have a 50 User id's ECC system and we have created a set of user id's in GRC"
What do you mean by you created user id's in GRC? GRC is not a product and you can not create users in any of the GRC products. I am sure you meant CUP here. GRC Access Control product can talk to LDAP, UME, SAP, SAP HR for authentication so it does not have it's own user administration module.
You can connect Compliant User Provisioning module of GRC AC to UME, SAP or LDAP for end-user (requestor) authentication but approvers and administrators have to reside in SAP UME.
In simple words, if all or most of your endusers exist in LDAP or SAP, you can configure authentication system as LDAP or SAP in CUP. You will have to create user ids for all the approvers and administrators in SAP UME.
Regards,
Alpesh

Drop down list for User ID's and SAP List viewer format

Couple of quick questions. Any help will be greatly appreciated.
1) I need to put User ID on the selection criteria screen. And also, I need to build a dropdown list for user ID selection by finding all user IDs in the Finance department and put it on the list.
2) I need to display the report in the SAP List viewer format, which enable these functions including sorting, hiding fields, filtering, exporting to an excel file as necessary. My output is currently plain vanilla as follows
loop at ibkpf where belnr = ibseg-belnr.
 read table iskat with key saknr = ibseg-hkont.
 read table icepct with key prctr = ibseg-prctr.
 read table icskt with key kostl = ibseg-kostl.
 write:/
 iBKPF-BELNR, " Accounting document number
 iBKPF-BUKRS, " Company code
 iBKPF-GJAHR, " Fiscal Year Range
 iBKPF-MONAT, " Period
 iBKPF-USNAM, " Username
 iBSEG-BELNR, "Document #
 iBSEG-BUZEI, "Item #
 iBSEG-BSCHL, "Posting Key
 iBSEG-SHKZG, "Debit/credit indicator
 iBSEG-PRCTR, "Profit Center
 icepct-ktext,
 iBSEG-KOSTL, "Cost Center
 icskt-ltext,
 iBSEG-HKONT, "G/L Account
 iskat-TXT20,
 iBSEG-DMBTR, "Local currency
 iBSEG-WRBTR, "Document currency
 iBSEG-SGTXT, "Explanation
 iBSEG-KOART. "Account type

Hello Syed
Here is a sample coding for a dropdown listbox:
*& Report ZUS_SDN_DROPDOWN_LIST
REPORT zus_sdn_dropdown_list.
TYPE-POOLS: vrm. " Value Request Manager: Typen und Konstanten
DATA:
gt_values TYPE vrm_values.
PARAMETERS:
p_usrid TYPE xubname AS LISTBOX VISIBLE LENGTH 13.
INITIALIZATION.
* Select the allowed values for dropdown listbox
SELECT bname AS key FROM usr02 INTO TABLE gt_values
 WHERE bname LIKE 'S%'.
CALL FUNCTION 'VRM_SET_VALUES'
 EXPORTING
 id = 'P_USRID'
 values = gt_values
 EXCEPTIONS
 id_illegal_name = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
END-OF-SELECTION.
You have two fields for the listbox available:
- KEY (obligatory)
- TEXT (optional)
Regards
Uwe

Fixed and sap field type

Hi Gurus,
Need your help.
--In defining external web services ...i have given the URL and other parameters in the standard call structure.E.g we have defined the user name and password as parameter values(fixed value).When a user clicks on the url from his/her browser,does the catalog ask for log-in details again or the above mentioned parameter values will automatically give catalog access to the user?
--I have read the 'help' on Fixed type and SAP field type.Can somebody explain me the diference clearly?
If fixed...the parameter value remains the same/fixed.Meaning?
If SAP field..."SAP fields are also permitted as single parameters during the catalog call. If, for example, a username has to be transferred, you can enter SY-UNAME in the Contents field. The system then automatically fills the parameter with the username."
What/where is a contents field?I cannot see it anywhere.Does it mean, when a user clicks on the catalog,the UN will automatically populate in the field?
Please let me know.
Thanks
Trey

Hi Trey,
-- you define user & password in the calling parameters to avoid logon when calling catalog, but also to control what he/she can see/order in the catalog, because this user ID is assigned some view IDs in the catalog
-- fixed values are entered manually in the customizing (they are fixed, so for more complex needs, you can add parameters in a BADI just before calling the catalog). ex: the ~okcode is always ADDI; the user / password can be fixed.
You can transfer additional parameters at runtime using BADI BBP_CAT_CALL_ENRICH.
SAP fields are not fixed but are variables. ex: if you use SY-UNAME as the parameter value for , this will be valuated at the run time, with connected user ID.
When you define the calling parameters for a catalog ID, (IMG Supplier Relationship Management --> SRM Server --> Master Data --> Define External Web Services (Catalogs, Vendor Lists etc.) you enter the parameter name(ex: user) and its value (ex: SY-UNAME with type "SAP field" or THONNS with "Fixed value").
Rgds
Christophe

Users not provisioned to SAP

While creation we used to provision the user to AD and SAP resource. but now while creation through on screen or scheduler users are provisioned only to AD. We are unable to trace the cause.Can any one help me out.

There can be a number of reasons why you have this problem.
Lets start by trying to narrow things down a bit. Do you have debug level logs enabled? If so what does the logs say?
Best regards
/M

Business Objects and SAP BI Integrated Planning material

hi
guys
i am looking for Business Objects and SAP BI Integrated Planning any material site plz send me
regards
suresh

Hi ,
Please find these blogs by Ingo. This should help you.
BusinessObjects and SAP - Installation and Configuration Part 1 of 4
Install Part #1
BusinessObjects and SAP - Installation and Configuration Part 2 of 4
Install Part #2
BusinessObjects and SAP - Installation and Configuration Part 3 of 4
Install Part #3
BusinessObjects and SAP - Installation and Configuration Part 4 of 4
Install Part #4
BusinessObjects and SAP - Configure SAP Authentication
SAP Authentication
BusinessObjects Integration with SAP NetWeaver BI - Technical Material
Thanks,
Gopi

How multiple users can open and update it same time in Sharepoint 2010, excel file

we are using SharePoint 2010, multiple users can open and update the file at same time in SharePoint, I have searched a lot and
read it, some suggestions were can create the file as share work book and then save on Share point and other were its supported only with Office web Apps, Excel Web App, we don't have office Web apps or excel web app, is there any other suggestion,
any help will be great, thanks in advance

Hi,
You need office web apps for co-authoring, see Software version requirements for co-authoring in SharePoint 2013 and SharePoint Online section in below link -
http://technet.microsoft.com/en-us/library/ff718249(v=office.15).aspx
and
http://office.microsoft.com/en-us/sharepoint-foundation-help/document-collaboration-and-co-authoring-HA102772333.aspx
Edit: Link for SP 2010
http://technet.microsoft.com/en-us/library/ff718249(v=office.14).aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Getting user name, date and time into 1 field

Hi All,
I have to add a new field in a customising include of AUFK table. This field should have user name, date and time. How do I store all these values in a single field of the table? Please help.

Ok Thanks all. Will try your suggestions. But there is one problem. As i have already mentioned that i will have to display this detail in one field of the table control, The format of display is: user name should be seen above and the date and time separated by space should be displayed below the name. How can i ultimately display this in the table control. Do i have to create 2 different fields (one for name and other for date and time) in the AUFK table or is there any other solution?
Thanks

How do you Enable/Disable a user's ScreenSaver and set it's time

How do you Enable/Disable a user's ScreenSaver and set it's "Start Screen Saver" time.
I am writting an application in java which uses JNI and a screen saver to lock users out of the computer unless they enter the correct username and password.
If they enter the correct password I need to Enable the ScreenSaver at a specific about of time (time can be changed remotely) so I can "log out" the user.
I need to disable the screen saver after the screen saver runs so that it doesn't run while the java login program is running.
I have this working already on Windows XP but can't find any way to program this on Mac OS X.
Thank you for any help!

http://forums.macosxhints.com/showthread.php?t=61525
Disable
defaults -currentHost write com.apple.screensaver idleTime 0
Enable for 180 seconds
defaults -currentHost write com.apple.screensaver idleTime 180

User status Date and time

Hi EXPERTS,
In notification when we change user status, system logs date and time in action log
I want to know in which table does user status date and time can be found.
Regards
Anil Kumar

Anil Kumar,
I'm not a t a system right now, but have a look at JEST and JCDS.
PeteA

How to retrieve users logging-in and logging-out date and times in SharePoint

At the moment I am using SherePoint 2013 with a few tenants.
I am going to have access to the users logging-in and logging-out dates and times.
For instance, I would like to know the detail of the dates and times which a particular user of a tenant has logged-in and logged-out during the past few months.
Any idea?

You can retrieve that info from the IIS log files. Maybe you can use a free IIS reporting tool that I've built and adjust it to your own needs, you can get it here:
http://gallery.technet.microsoft.com/office/The-SharePoint-Flavored-5b03f323
Btw, in a web environment usually there is no such thing as the log-out date and time because the end user just stops making requests. So, you've got to take a look at the last request and by default, after 20 minutes the session times out and you can assume
the session has ended.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Will Verizon Stop encrypting sim cards for iPhones so users can talk and surf at the same time?

Will Verizon stop encrypting iPhone sim cards so users can surf and talk simultaneously?

I can prove that this is not the case. I travel abroad monthly and have sim cards for these 2 countries i frequent and i can surf and talk at the same time. The claim that it needs another antenna does not support my findings. Can we be more transparent please. As a costumer i find it highly inconvenient to have to hang up a call with someone just to access an email.
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks? What do I need to do dif

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?

The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

Run time Error in accessing Analyzer on VIsa 64 bit, Office 2007 and SAP GU

Hello experts-
I can not run Bex Analyzer using WINDOWS VISTA HOME PREMIUM 64 bit OS, Office 2007 and SAP GUI 7.10
I am receiving Run time error "5" and does not let me open or create a new query. Please share your experience and thoughts so that I could be able to fix this issue
Thanks

Hi Suresh,
Check the RFC connection of Source system. It seems that your rfc connection is not working properly. So make sure that you are able to establisthed the connection between these 2 systems.
Regards
Subhash

Bulk load users into Directory and Messaging at the same time

Can I bulk load users into Directory and Messaging at the same
time?

Yes, but you are not really loading users into the Messaging
Server. The Directory Server contains all kinds of information about
users, including information about their email. So if you want to
load user information into the Directory Server, including the users'
messaging infromation, you must install the Directory server first.
Configure the directory server. Then install the Messaging Server.
Then you can load users into both by loading an LDIF file with the
user information.

Hi,
You can check the documentation: Multiple Copies of RMAN Backups ;-)
When backing up datafiles, archived redo log files, server parameter files and control files into backup pieces, RMAN can duplex the backup set, producing up to four identical copies of each backup piece in the backup set on different backup destinations with one BACKUP command. (Note that duplexing is not supported for backup operations that produce image copies.)
There are three ways to specify duplexing of backup sets when using the BACKUP command:
Specify a default level of duplexing with CONFIGURE... BACKUP COPIESAll backup commands that back up data into backup sets will be affected if you use this option, unless you specify different duplexing options for a command using SET BACKUP COPIES or provide a COPIES option for the BACKUP command.
Use SET BACKUP COPIES in a RUN block All commands in the RUN block will be affected, overriding any CONFIGURE... BACKUPCOPIES setting, except those where you provide a COPIES option as part of the BACKUP command.
Provide a COPIES option to the BACKUP command For this specific BACKUP command, files will be duplexed to produce the number of copies you specify.
Cheers
Legatti

Time-Zone Help. User Time Zone and SAP Time Zone!

Similar Messages

Maybe you are looking for