Timecode and capture problems

Using FCE. It will not give me device control for my Sony Z1U camera or sony deck. IT just starts capture immediately. I have no controls or source time code when loading HDV footage using HDV-Apple intermediate codec 1080i60 in easy set up.
No log and capture window. No source timecode. Help!

Hi(Bonjour)!
As HDV is converted to AIC format upon capturing, there isn't global timecode in your material.
FCE HD handles only relative timecode for your source material, fromm 0:00:00;0 (start to the end of media) and cannot display timecode. FCP can display it.
There is a free plugin writed by PieroF that allows to display some timecode at:
http://web.mac.com/piero.fiorani/iWeb/PieroF%20FCE%20Effect/FCE%20Timecode%20Dis play.html
Michel Boissonneault

Similar Messages

  • Log and capture problems for HDV using FCP 5.0.1

    I cant seem to get a picture in my log and capture browser when using HDV. The screen says my camera is connected, I see timecode correctly rolling in sync with my cameras timecode, I can use the controls, but no picture on the screen?
    When I hit capture now, the capture screen pops up and gives a message "waiting for data from device".
    we shot at 720p at 25fps, there is no capture preset for this in my version of FCP. Could this be the problem? Please help!!

    Thanks for responding.
    It's a mac osx 10.4.11 and a 2 ghz intel core duo. I'm using easy set up in final cut pro, but there is no option for hd fire wire basic (which apple support told me to look for). The only hd options are 1080i50, i60 and 720 p30. The other hd options are for the apple intermediate codec. When I use the easy set up for hd 1080i60, then go to log and capture, it doesn't give me the preview window to set in's out, batch capture etc. It only lets me capture straight from the camera and I have to manually stop it and start it which is a major pain. Plus the clips need to be rendered once I put them in a timeline. I've shot and edited on mini dv with final cut for nearly 7 years, but now that i've tried to upgrade and shoot hd mini dv, all of these problems have arrived in capturing. I'm starting to think my version of final cut pro (5.0.1) just doesn't work with hd, unless it's very time consuming. Any ideas?

  • Possible solution for no preview and capture problems

    We are part-time, intermittent users of FCPro - so numerous upgrades of QT, system10, FCPro have taken place since last we captured or did any editing. Seems like all our presets from former use have disappeared, leaving us starting fom scratch. Not using a sophisticated set-up, still capturing through the ADVC-100 with a non-controllable camera. All I know is, last time I captured, everything worked, and I never have had the option of device control.
    After my struggling with the no preview issue all day, my husband DID do some maintenance stuff (delete preferences, repair permissions, etc) but I don't think that was a factor. Try the following (keep in mind, the ADVC is a pass-through "thing"(?)):
    Audio/Video Settings
    Capture Presets
    Edit
    Name: DV NTSC 48 Khz
    Quicktime Video Settings: Digitizer DV Video
    Input: DV-VCR
    Quicktime Audio Settings: Device DV Audio
    Please bother to post back if this solves your problem - then others will know it works.
    Still having audio sample rate problem, so I may be back....

    Using FCP 5.1.4 During the quest, I'm fairly sure we tried that repeatedly. I think the setting that made the difference between "working" and "not working" was the Quicktime (vers.7.2) setting for Input to DV-VCR. But you are right, I did need to reset the other setting in "capture now" screen to non-controllable device. I did look over past posts on this subject, and before I got cross-eyed from trying to digest too much techno-talk, I did seem to see a correlation with QT in people's observations.
    Oh, and BTW, I wouldn't say it works like a charm - I keep having to go back to easy setup and re-choosing my settings. Sounds to me like something that is supposed to get re-set as part of the preview/capture procedure is actually re-setting the wrong variable, and creating a domino effect after that. There's bad code somewhere.

  • ZIU timecode/capture problems

    This is issue we've been struggling with for a couple months now, originally thinking that it was an FCP version problem. Now we have been running FCP 5.1.2, Tiger, and QT all at their latest versions still no improvment.
    The problem is we shoot a tape with our SONY HDV-Z1U and log the clips in FCP. When we go to batch capture many of about 25% of all these clips have capture problems. Final Cut detects timecode breaks and captures 2,3,4, sometimes 15 versions of these labeling them clip, clip-1, clip-2, etc....
    You can actually see these wierd glitches and jumps on the camera LCD and on the FCP capture window. Sometimes the camera will rewind itself over and over trying to find the proper IN on the tape.
    It seems like someone out there has had to run across this issue because this is such a common camera and such a common task. I'm almost worried that it's a camera problem and I don't even know where I would go to ask about something like that. I have not been albe to find any documentation that this model camera has TC problems.
    Please, help or point me in the right direction it must just add a couple years to my life!!!
    Thanks.

    I have a ZU1 and I occasionally encounter this problem, but it's usually one clip out of say 25 or 30 on a given tape. I'm never sure what causes the problem and if I simply skip the problem clip I can sometimes go back and digitize just that one last clip.
    I do know the ZU1 seems to need plenty of pre-roll in the front of the tape, but I'm assuming that's not the problem. You're using new, high quality tape, correct? Have you tried a simple head cleaning on the ZU1.

  • Log and capture big problem

    I am using FCP 3 (fully registered) i hit the log and capture NOW feature, and the screen brightness drops in half and a message that says I have to restart my computer and freezes up my computer.   The message is in 4 different languages making me think that it may be a computer error rather than a FCP message.
    I deleted my FCP plist file, and the FCP user data,  preference file and the POA cache file. Problem is still there.

    That's a kernel panic - whole system stalling.
    Do you have both FCP 7 and FCP X installed?
    If so, did you follow installation instructions provided by Apple:
    http://support.apple.com/kb/HT4722

  • Officejet Pro 8600 e. Problem scanning from Scan and Capture App in Win 8.1

    Officejet Pro 8600 e.  New.
    Installed on HP Envy 23 Touch. Running Windows 8.1.  
    Wireless set up. Prints fine.  Problem is scanning from the HP Scan and Capture Software App in Win 8.1  
    Using Scan and Capture App I can scan photos fine.  They come out clear.  Scanning documents in GRAY has multiple bands/lines in gray over the entire page running vertically.  Scanning documents in COLOR are fine.
    Also, if I scan from the printer directly using the touch screen on the printer, the scan output is fine.
     I did the Scan utilty to discover any errors and it did not show any.  I think it's a software error.  I am going to uninstall the HP Scan App and then reinstall.  So, I will do the uninstall/reinstall and report back.
    Also, I would like to know if there is a desktop program for scanning?  I would prefer to use that instead of the Modern HP Scan and Capture App.
    Thanks....
    This question was solved.
    View Solution.

    Hi artrum,
    I understand you've been experiencing issues scanning from your Officejet 8600 using the Windows Scan and Capture program. I will certainly do my best to help you with this!
    From what you've explained, I believe you're correct, it does seem like it's an issue just with the Windows Scan and Capture program and as you've been able to scan from the front panel of the printer you definitely have the HP software installed. What I'd like to do is have you use the HP Scan software, where you should no longer run into issues.
    To access the HP Scan software and be able to access it easily from your desktop I'd like you to follow the steps below:
    1. Go to your start screen and just start typing File Explorer. You should be able to then open it to access your computer's files.
    2. Then open Local Disk (C: ), followed by Program Files (x86), followed by HP, then HP Officejet Pro 8600, followed finally by bin.
    3. In the bin folder you should see HPScan. You will want to right click on HPScan and go to Send To and then select Desktop.
    Now you should see HP Scan on your desktop and be able to open it and scan through that application.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • Cannon GL2 - FCE 2 and iMovie Capture Problems

    Hello Hello
    I've read here that folks are having a tough time capturing with thier Cannon GL2. The device goes from NO problem to 'Can't intiate a capture because the device looses connectivity.
    I tried to find a common denominator to this problem, and it seems this post regarding Quick Time Files can help? Yes?
    Is this the main problem?
    Anyway I'm also having connectivity issues with both iMovie 6 HD, and FCE 2
    Just wondering if I should also follow the directions on this post and have my capture problems solved?
    http://docs.info.apple.com/article.html?artnum=301852
    BTW - I currently have Quicktime 7.0.4
    Thanx

    Hi Tom - Thanx for your reply!
    Well, yes I have (as my profile indicates), a G5 1.8 Gig, currently with an external Lacie HD plugged in. I also have a Cannon GL2.
    But before I go any further, and before I try those directions for cleansing certain Quick Time 7 Library Files, I think I figured out the dilemma.
    This problem of GL2 recognition (from what I've read), is common for folks who have similar equipment, and a similar set-up as mine:
    It seems (as I've also read here), that my G5 does NOT like 2 devices which require the same connection speed plugged into the 1394 Firewire Port at the same time - trying to share the same bus.
    I confirmed this by disconnecting the Lacie FIRST - then booting back up - and WALLAH - the GL2 was certainly receoginzed both in iMovie 6 HD, and FCE 2!
    I also further resolved the issue by buying a 'cheaper' Cannon Camcorder - the ZR500.
    Now I can actually share the Lacie HD in the Fire Wire Port with this slower connection speed camcorder. And a further benefit is giving my GL2 a rest when it comes to 'capture only'
    Does all this make sense?
    If so, perhaps I've already discovered stuff that other folks already know ...
    Thanx
    Mike

  • Any known problems with FCE-HD and "Capture Now"  or edits

    I've been working with FCE for almost two years now. I've had the same problem ever since-- The SPINNING PINWHEEL OF DEATH when: playing back edited video from the timeline and the playhead passes over various edit points, usually cuts. Is it a CAPTURE problem, or camcorder RECORD problem, or something else? I use a SONY DCR-TRV38 with firewire; FCE-HD;
    Any thoughts on why I get this problem so often, and what I can do to avoid it in the future? should I just switch to Avid or Premier??
    Thanks for any help...
    Shawn

    Hi Shawn.
    I don't think there is a "known problem".
    I assume your HDs are not more than 75% full or fragmented?
    If you have not already done them, try the old chestnuts of Trashing the Preferences and Re-installing FCE.
    1. Make sure you trash all 3 of the Preference Files as detailed in this article:-
    http://docs.info.apple.com/article.html?artnum=93690
    2. If that does not work then re-install FCE but make sure you delete all the old FCE files first as shown in this link:-
    http://docs.info.apple.com/article.html?artnum=301182
    Good luck.
    Ian.
    PS. When you write in with a problem, remember to give all possible APPROPRIATE details eg.
    Computer model and external Hard Drive.
    Operating System.
    FCE version.
    Camera type.
    Did the problem suddenly occur or has it NEVER worked?
    Have you recently loaded new Software or Upgraded ANY programs, Operating Systems etc.
    Have you moved or altered your source files?
    Have you captured the clips from a DV camera or an A/D Converter etc.?
    Is it Standard or High Definition Video?
    What type of files are you using?
    Also include details of exactly what you were doing before the problem occurred.
    Is your film hours long and filled with numerous transitions and effects etc.?
    THIS IS A GENERAL LIST. SOME OF THEM WILL NOT APPLY TO YOU.

  • Problems Logging and Capturing

    I am working on a MacBook Pro with Final Cut Pro 5.0. The camera I am working with is a simple SONY Mini DV Digital Handycam. I am tring to log and capture, but everytime I go to capture something the timecodes reset themselves to the same outpoint, thus not letting me capture the things. Please let me know how I can fix this!
    Thank you in advance
    Magdalena

    Ah! Now I know what's going on.
    When you Log footage, you are no longer going to be using the Capture Now feature. Logged clips give you way more control.
    Instead, after logging all the clips (so you have many off-line clips in your bin), close the Log and Capture window, select all the Off-line clips, and then Right-click (control-click) them and say "Batch Capture". This will pull up a box that will let you say you want to capture all "selected media" or something. Then your computer will do the work of re-winding and playing and capturing. It's a beauty.
    Hope that helps.
    ~Luke

  • Log and Capturing without Timecode?

    I want to play video from my television, to my camera, to my computer. I see the video on the computer screen but when i try to log andcapture it is looking for timecode and there is none. how can one capture this footage?
    thanks!!!

    Since the video feed contains no timecode, in FCE's capture settings, you must select "DV Convert" and then use Capture Now.
    -DH

  • Broken Timecode during capture  in FCP 5.04 Tape does not have broken time?

    I am trying to capture video froma mini dv canon camera and fcp is telling me that there is broken timecode. I have checked it with imov with no problem and when I view the tape there is no broken timecodde? can anyone help
    Thanks
    joe

    iMovie does not use timecode.
    Canons are notorious for weak timecode and firewire support. Try capturing the tape using another DV player.
    x

  • HDV Capture Problems in FCP 5.1.1

    We are using a Sony M10U HDV deck to capture footage in Final Cut Pro. Recently, on all 3 of our systems, the tapes seem to be coming in with a TON of time code breaks - and at each FCP creates a new clip. In a single 60-minute tape I will end up with 40+ clips. Not very convenient for multi-cam editing. We've been using the deck since FCP 5.0 came out over a year ago and have not had this issue in the past.
    I can't seem to recall any particular software update that we might have done on the Powermacs at the same time that could have caused this. (For awhile, two systems were on 5.1 while the other was still on 5.04 and all had the same issue). I've tried skipping the Sony deck and digitizing straight from a camera with the same problems. I've tried different firewire cables too.
    Also, if I play the tape straight to an HD monitor from the deck or a camera there doesn't appear to be any time code breaks or drop-outs. If I downconvert and capture as DV, everything captures fine with no timecode breaks reported. It only seems to be HDV related.
    Short of clearing off and re-formatting my hard drives, (I currently have 4Tb of data and I'm not sure where to go with it all) I'm running out of ideas on what else to try.
    Has anyone else experienced this issue?
    I'm running:
    FCP 5.1.1
    Mac OS 10.4.6
    Quicktime 7.1.1
    Dual 2.7Ghz G5
    8Gb RAM
    GeForce 6800 GT
    Xserve RAID 5.6Tb
    Thank you.

    Perhaps you have updated Quicktime recently?
    If so, try a full quicktime reinstall.
    Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
    Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
    Run the Quicktime installer.
    Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
    Reboot
    Good luck.
    x

  • Capturing Problem with Sony TRV330

    Capturing problem with Sony digital8 trv330.
    I recently purchased the above camcorder from eBay for capturing old 8mm/Hi8 tapes for editing purpose. The camcorder set to A/V -> DV OUT connected with Firewire to my Power G4 and the Easy Setup was DV-NTSC. The playback on the capture window looks OK except there were no timecode in the Timecode Duration Field and the Current Timecode Field (both shown 00:00:00:00) during playback but there was timedoce in the camcorder viewfinder. When I click the Capture Now button, the capturing window show up with message “waiting for timecode ….”. I have to click “esc” to stop the capturing operation. I trash the Preferences and Ran the Disk Utility without success. I also tried the Easy Setup with DV-NTSC DV Converter as well as DV-NTSC 32Khz, nothing work.
    My set up is: Mac Power G4 version 10.5.5/ F.C.E. 4.0.1/ QT7.5.5/ Startup 160 GB-89 GB available/ Scratch 350GB-277GB available. Folks, I need help. Thanks everybody.

    Hi, I have a similar problem. I am trying to digitize my 8mm tapes (via firewire) using final cut express (4.0.1). Using easy setup I use DV-NTSC DV Converter and do capture now. I transfer the entire tape but notice the audio is out of synch with the video. This problem gets worse throughout the transfer process. When I use the esc to complete the transfer I get the error " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape....." So after searching around it is recommended I change the audio sample rate to 32 kHz option. However, when I do this using easy setup and picking DV-NTSC 32kHz I cannot use capture now because I have no timecode and so the window comes up with the message "waiting for timecode". Since there is no timecode this option does not work. Any suggestions? Thanks, Dan

  • Timecode and logging troubles

    Hi,
    I have recently been having a lot of trouble capturing logged media from my Panasonic AG-DVC30 camera. I thought at first it was the tape so I went out and bought a new one, but sadly that seems not to be the issue. It seems as if the problem is occurring because there are two timecodes, one when the tape is stopped and another for the actual footage. This makes it so that when Final Cut tries to capture it seems to become confused as it tries to rewind or fast forward, and instead goes into a rut in which the display on my camera shows the timecode being switched back and forth between the two timecodes. Finally Final Cut gives up and says that it is unable to find the timecode break or something like that. I am really desperate to figure this out so please post if you have any suggestions. I probably just did not set something up right, but I'm definitely stumped.
    Thanks,
    Brett
    PowerBook G4   Mac OS X (10.4.6)   Final Cut Pro HD
    PowerBook G4   Mac OS X (10.4.4)  

    It seems as if the problem is occurring because there are two timecodes, one when the tape is stopped and another for the actual footage.<<</div>
    Never seen such a problem. If that is what's actually happening, send your camcorder in for service NOW.
    But more likely is that when you started and stopped during recording, the camera lost track of the timecode and started over again. This often happens if you review footage after a shot then don't cue the tape back to the right position. Hence the timecode break message from FCP.
    -DH

Maybe you are looking for

  • OfficeJet Pro K8600 looses communicat​ion -will not print

    This is our main printer in the design area at work and I really need this to work!!  Any help appreciated. Vista SP2 Dell Pavilion Intel Quad 2.33ghz 64bit OS 8gb RAM OfficeJet Pro K8600 on USB cable to main ports I loose the connection and have to

  • How to run the SDK samples - IAC

    Hi, I've been doing some research on how to read the contents of a pdf from a C# app. So thought of trying the acrobat SDK. I tried to run a C# sample given with the SDK and got the following exception. "System.Runtime.InteropServices.COMException (0

  • REG:ALV Variants

    Hi all, I am working on an ALV List display.in the output If you select the magnifying glass and display item detail, or change the display variant, the header information on the report (User Name and Report Name) repeat themselves. How can i get the

  • Bit Map Indexing

    Hi All i have a table with 5.5 million records and i have a fields (project id and owner id) with 8400 and 507 distinct values. For reporting reasons i want to create a bit map index on the project id. My question is even though it makes the query fa

  • Updates to CS6

    I took updates from within CS6 using Help>Updates.  All worked OK except for Photoshop itself which gave an error message: Adobe Photoshop 13.0.1.2. Installation failed. Error code U44M1P7.  I tried installing the update specifically but this also fa