Timed out while typing - draft deleted!

Hi
I have just spent an hour typing an email, when I went to send it it gave me a Timed Out message and then asked if I wanted to sign back in, which I did, I then clicked on the subject heading of my message as it appeared in Drafts, which to my horror then told me my message had been Moved Or Deleted.
****** off, hence very little punctuation
James

I believe this is an issue when sending email using .mac's webmail, not with the OSX application Mail Version 2.1. It will automatically log you out after 30 minutes of inactivity. In my book, typing one email for 30 minutes should not be considered inactivity but anyway... Nothing is more annoying than typing out a long-winded email, clicking send and then seeing this appear:
To protect your account, you have been automatically logged out after 30 minutes of inactivity. You have been logged out of .Mac Mail due to inactivity.
James, I feel your pain
15 inch Powerbook G4 Mac OS X (10.4.8)
15 inch Powerbook G4 Mac OS X (10.4.8)
15 inch Powerbook G4 Mac OS X (10.4.8)

Similar Messages

Getting session has timed out while trying to redeem a gift card. have had no problem in the past. am running a g4 since 2002 with os 10.4 and itunes 9. have no internet problems and can connect to store ok. so far apple no help keeps blaming it on othrs

am having trouble for the first time trying to redeem a gift card. Everything same on computer, OS, and internet connection. have been able to redeem other cards. this time am getting "SESSION HAS TIMED OUT" while trying to redeem card. have contacted apple and checked out all their suggestion iE:( must be your connection. typed in code wrong, too old version of itunes, etc) anything but why would a gift card code bee tied to a specific vetrsion of ITUNES. Rediculous!! there has to be others out there that have an older version if itune than i have. has anyone ever had the error "SESSION HAS TIMED OUT" and if so was it corrected?? any information other than apples {change password and give us lots of personal info they probably have) would be appreciated..

Hello,
As far as I can see, that Verizon Jet Pack wireless Modem uses WPA2 to connect.
The Router might complicate things right now.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

I am getting an error message that my network connection has timed out. while trying to update my iPhone on iTunes. Has anyone found a solution? I was given some advice about turning off my firewall and/or virus protection but am nervous about doing that.

I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.

See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues

Request timed out while waiting for response!!

Hi All,
My scenario is PROXY to SOAP. I am getting below error while posting to WEBSERVICE.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">Failed to deliver inbound WS message, code=503 and reason=Request timed out while waiting for response. at com.sonicsw.net.http.ws.WSHttpProtocolHandler$HttpInBrokerHandler.invoke(WSHttpProtocolHandler.java:833) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453) at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.sendToSOAPStack(WSHttpProtocolHandler.java:630) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.dispatch(WSHttpProtocolHandler.java:537) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.servicePost(WSHttpProtocolHandler.java:284) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.service(WSHttpProtocolHandler.java:609) at com.sonicsw.net.http.HttpProtocolHandler.handle(HttpProtocolHandler.java:471) at progress.message.net.http.server.HttpConnectionHandler.handle(HttpConnectionHandler.java:170) at progress.message.net.https.server.SonicHttpsConnection.service(SonicHttpsConnection.java:156) at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:981) at org.mortbay.http.HttpConnection.handle(HttpConnection.java:831) at progress.message.net.https.server.SonicHttpsServer.handleConnection(SonicHttpsServer.java:449) at progress.message.net.https.server.SonicHttpsServer.handle(SonicHttpsServer.java:364) at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534)</ns1:stackTrace>
Any Idea ? Do I need to change anything in my SOAP Channel or BAsis should change the Time Parameter?
Thanks,
Pushkar Patel

Hi,
>>>>>>>Request timed out while waiting for response.
See the below link, it might be helpful to you for timed out issue.
[Link1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?quicklink=index&overridelayout=true]
Regards,
Rajesh

Javax.transaction.SystemException: Timed out while in 'Logging' state!!!!

Hello, we have an OracleWeblogic 10.3.2 running on a Solaris OS.
In this AppServer we have a FullStack J2EE Application executing distributed transactions that involve 3 manageable resources:
TxDatasource (EJB),
NonTxDatasource with enableTwoPhaseCommit and
JMS
Some of the transactions are timing out while in 'Logging' state and I just cant figure out what the root cause is. As a defensive action I lowered the JTA Timeout seconds because I noticed the 'Logging' phase was taking too long and then timing out. Idea here was not to have too many threads hanging in Logging state and therefore use the JTA Timeout to overcome this problem and minimize impact.
Below, I'm posting a few exceptions thrown in applicaiton log. Any help is very appreciated.
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '175' for queue: 'weblogic.kernel.Default (self-tuning)'> <JG47515> <> <> <1313163611120> <BEA-010026> <Exception occurred during commit of transaction Name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)],Xid=BEA1-7DB913B4CB2B36D47CB7(1248714554),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=82,seconds left=60,XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),properties=({weblogic.transaction.name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)]}),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
... 2 more
.>
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '154' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1313163611119> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-7DBB13B4CB2B36D47CB7(977835896),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=60,seconds left=60,XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:500)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3747)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5096)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
... 3 more
.>
This is the stack trace of the thread that hangs while waiting for the lock to write in the transaction file:
"[ACTIVE] ExecuteThread: '64' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=3 tid=0x000000010dea3000 nid=0x1e2 in Object.wait() [0xfffffffda03ff000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:2005)
     - locked <0xfffffffe64964b30> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2320)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:273)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
     at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
     at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
     at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
     at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
     at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
     at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
     at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
     at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
     - locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
     at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
     - locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
     at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
     at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
     at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
     at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: user8727499 on Aug 12, 2011 11:57 AM

Hello, we have an OracleWeblogic 10.3.2 running on a Solaris OS.
In this AppServer we have a FullStack J2EE Application executing distributed transactions that involve 3 manageable resources:
TxDatasource (EJB),
NonTxDatasource with enableTwoPhaseCommit and
JMS
Some of the transactions are timing out while in 'Logging' state and I just cant figure out what the root cause is. As a defensive action I lowered the JTA Timeout seconds because I noticed the 'Logging' phase was taking too long and then timing out. Idea here was not to have too many threads hanging in Logging state and therefore use the JTA Timeout to overcome this problem and minimize impact.
Below, I'm posting a few exceptions thrown in applicaiton log. Any help is very appreciated.
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '175' for queue: 'weblogic.kernel.Default (self-tuning)'> <JG47515> <> <> <1313163611120> <BEA-010026> <Exception occurred during commit of transaction Name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)],Xid=BEA1-7DB913B4CB2B36D47CB7(1248714554),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=82,seconds left=60,XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),properties=({weblogic.transaction.name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)]}),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
... 2 more
.>
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '154' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1313163611119> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-7DBB13B4CB2B36D47CB7(977835896),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=60,seconds left=60,XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:500)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3747)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5096)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
... 3 more
.>
This is the stack trace of the thread that hangs while waiting for the lock to write in the transaction file:
"[ACTIVE] ExecuteThread: '64' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=3 tid=0x000000010dea3000 nid=0x1e2 in Object.wait() [0xfffffffda03ff000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:2005)
     - locked <0xfffffffe64964b30> (a weblogic.transaction.internal.ServerTransactionImpl)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2320)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:273)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
     at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
     at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
     at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
     at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
     at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
     at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
     at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
     at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
     - locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
     at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
     - locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
     at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
     at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
     at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
     at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: user8727499 on Aug 12, 2011 11:57 AM

The operation timed out while writing (kCFStreamStatusOpening)

iMessage cant send files. This is what it says in the file transfer window. "the operation timed out while writing (kCFStreamStatusOpening)" Help

Hi,
In the past in the Mountain Lion (Messages 7.x.x) I have sent quite large photos via the iMessages account of several GBs of data.
I have yet to do the same in Messages 8 (Mavericks) but don't expect for this to have changed.
I do know that the Messages 8 app tends to zip some files before sending when dragged from other apps such as a Browser or iPhoto.
I have sent a Keynote file to my iPhone in Messages 7.x.x but this was only 334 kb
What sort of files are you trying to send ?
If not zipped already it may pay to try this first.
7:21 pm Sunday; November 3, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT1688 the network connection timed out while updating iphone software

the network connection timed out while updating iphone software and cannot continue.

Might want to search the Mac forum or post there... also, this thread is over 2 years old.

MAX timed out while waiting for a driver

I am getting an error when starting MAX. the error is that MAX timed out while waiting for a driver (nidaqe plug-in). I have a PCI-GPIB card and an PCI-MXI-2 card in the PC. The operating system is Windows XP.
I am able to see both these cards under the Windows Device Manager>Hardware.
MAX version is 4.6.1f0
I have also installed NI-488.2 and NIVXI331 driver installed on the computer.
Any help will be appreciated.
Thank you.
vxiguy

Hi vxi_guy,
What you're seeing could be the result of a few different things. First, I would check to see if the NI Configuration Manger and NI Device Loader are running, as per this KB. Then, if that doesn't work, I would explore the solutions described in this KB. Please let me know if neither of those articles resolve the issue. Have a good one!
aNItaB
Applications Engineer
National Instruments
Digital Multimeters

Client Timed Out While Answering Challenge HELP please!

ok, so i just added a WPA password to our airport extreem so my neighbor would stop using it. this worked, and for a second it seemed to be running good. now though when im on using bootcamp, running counter strike every time i try to join a server this error message comes up "Client Timed Out While Answering Challenge", and i have no clue why and its really ticking me off. The internet works fine on the windows side, and counter strike worked ok before i set the WPA passoword except real slow because of my neighbor using it. but no this error message is very annoying and if anyone knows how to get rid of it please help.

Close itunes then
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again

Qmaster error: shared storage client timed out while subscribing to...

Here's my Qmaster setup:
computer 1: CONTROLLER, no nodes
- 8TB RAID hooked up via Fiber
- connected to the GigE network switch via a 6-port bond
- cluster storage set to a path on the RAID
computers 2, 3, 4, 5: RENDER NODES
- each computer has a 2-port bonded connection with the GigE switch
computer 6: Client, with FCS2 installed.
- connected with a single GigE link
I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
"Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.

WELL I DO NOW!
Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
if you are in london, lets lift a beer or five together.
thank you sir. thankyou!

JDBC activity timed out while updating a table.

Hi,
We have observed the exception *'JDBC activity timed out while updating the table -Table1"* in our logs in prod environment.
1)we verified the AWR report for that particular time and observed that one update statement was trying to update the table table1.
its a simple update statement as below
UPADTE TABLE1 SET COL1=VAL1,COL2=VAL2 WHERE ID1=VAL1 AND ID2=VAL2;
there is a PK index on ID2 column.
2)we also came to know that there were no locks on TABLE1 during this time.
can some one please let me know what could be the possible reason for this kind of exception?
Thanks

958572 wrote:
Hi,
We have observed the exception *'JDBC activity timed out while updating the table -Table1"* in our logs in prod environment.
1)we verified the AWR report for that particular time and observed that one update statement was trying to update the table table1.
its a simple update statement as below
UPADTE TABLE1 SET COL1=VAL1,COL2=VAL2 WHERE ID1=VAL1 AND ID2=VAL2;
there is a PK index on ID2 column.
2)we also came to know that there were no locks on TABLE1 during this time.
can some one please let me know what could be the possible reason for this kind of exception?
ThanksOS/Networking mis-configuration.
Oracle does not know or care about the type or flavor of remote client (JDBC, OCI, ODBC, etc).
Oracle's default configuration contains no timeout.
I suspect a FireWall setting.

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

Timed out while sending ... message may be send more than once

Hi,
I regular have complaints from some clients receiving my emails 10 -15 times in their mailbox.
When checking the maillog I always see : timed out while sending ... message may be send more than once. See below
Problem can happen at any time, even when there is just 1 person connected to the server, so I rule out overload.
95% of mails send arrive without problem.
When looking the dns mx info of these clients I am having problem with, all have multiple (round-robin ?) mx-hosts (eg mx.mailprotect.be).
Is someone else having these problems ?
gr
Fonny
Nov 20 14:05:05 osxserver postfix/smtp[33385]: 3846CBE9FFC7: conversation with monitor.estrel.com[62.154.155.69] timed out while sending end of data -- message may be sent more than once
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:27:06 osxserver postfix/smtp[34737]: 6F586BEA0F09: lost connection with mx1.hotmail.com[65.55.92.136] while sending end of data -- message may be sent more than once

It means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.

My Ipad 2 is timing out while using it. Battery is charged and all apps are closed.

My Ipad 2 is timing out while I'm using it and I can't figure out why. I've made sure that all of the apps are shut down. The screen goes blank and thepassword screen shows up a few seconds later.

Your apps aren't just crashing, or you would be taken back to the home screens and not the screen where your passcode have to be entered. Seems like something is corrupt. Have you rebooted the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen? I don't think that's likely to fix the problem but it will not hurt anything to try that first.
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.

"network connection timed out while downloading ios6"...to my iphone 4. Now what?? help?

"network connection timed out while downloading ios6"...to my iphone 4. Now what?? help?
I am using windows.

Hey yeah I have the same problem! They told me to uninstall all apple products off my PC and reinstall and now I'm running into the same issue while trying to download itunes and everything all over again. I am currently on hold with applecare to try and get a resolution, I will update as soon as I can!

Timed out while typing - draft deleted!

Similar Messages

Maybe you are looking for