Timed Trigger timer resets when text is eneterd in TEXTEDIT

Forum,
I have a java WD applcation, where the requirement is to Auto Save the contents of a view with several Text Edits automatically after 10 minutes, so that the data gets saved while the user is writing (and it is saved if he forgets to save the content and logs out or power goes off).
For the same, i have used a Timed Trigger Element which calles a method to save the contents in the textedits. But the problem is, it is not behaving as espected.
The Timed Trigger element's timer resets even when text is entered in the textedit, though i was under an impresseion that the Timed Triggers timer resets only when there is a request from clent to sever.
pls tell me how to rectify this issue.
Edited by: rana brata de on Sep 9, 2010 5:27 AM

Hi,
Ensure that you do not have any events which are triggered by changes in the TextEdit control.
Walter

Similar Messages

  • Date/time resets when battery runs out on E51

    Any ideeas how to solve the problem?

    There is a little auxilliary in the phone. This is the battery that keeps the clock going when the main battery is removed or flat.
    Usually the date/time resets when there is a fault with this auxilliary battery. You can get it replaced at your nearest Nokia Care Point.
    You can find your nearest Nokia Care Point at:
    For UK
    http://www.nokia.co.uk/A4228006
    For Europe:
    http://europe.nokia.com/A4388379
    For Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair. 

  • Date and time reset when batery is empty

    the date and time reset to initial state when the battery is empty, what should i do, thanx

    Moy666 wrote:
    Hi TJK, Thanx for answering,
    My MBP have already a three months bought, what i should do, call to apple or to dealer?
    I supposed its in warranty yet. THX
    Your MBP has a one year hardware warranty on it.
    As Trey suggested, it wouldn't hurt to try an SMC reset. If that doesn't work, you definitely want to contact AppleCare so you get it taken care of under warranty.

  • T400 system time resets when battery dies

    Anyone else having this issue? I've had it on many of our T400's here. If the user allows the battery to completely run out without shutting the laptop down, it will kill the bios battery too and reset the system date and time.

    I have had this problem with other laptops as well..
    I am guessing the problem is with the cmos battery on the motherboard and not the main system battery,
    Whwn the system is shut down or the main battery dies, the cmos battery is the one that saves the time and keeps it updated.
    Also its the cmos battery that powers the bios during system startup.
    If you need to reset the time every time you start up the system , thats the first indication that the cmos battery is dying.

  • Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.

    Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.

    Lots of Frustration.  In some cases the LGG2 is rendered useless even as a phone.
    Here is what I did.
    Got replacement Phone.
    Same problems but I shut down all apps that I purchased even though they worked before KitKat.
    Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
    Then I got 2 CM free utilities.  The Clean and Wash utilities. Run them and find the culprits grinding CPU
    cycles and running down the battery.  Number One is the Verizon Voice Mail service constantly turning on and off
    and retrieving data not there.  Turn of the extra Voice mail and use the old access with the *6.  Unless you have
    100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
    YOU can see the battery suckers and shut them down when not using automatically.
    Start putting back one application at a time you used often and see it they work and if the utilities will tune them
    down if they cause problems.  The LG will get better but with some limitations.
    LG and Verizon have a problem with what was a great phone.turned bad overnight.
    whatmorecanyousay

  • Downloaded IOS7 last night following which appears to be a time delay on keyboard when texting etc?

    Downloaded IOS7 to IPhone 4S and now suffering from delayed reaction on keyboard when texting etc.
    can anyone help or suffering same issues?

    Try this, Tim -
    Tap Settings > General > Reset > Reset All Settings
    Does that help?

  • Internet connection times out when downloading update ios5. get to last 0.01 of date, says processing file and then says connection timed out. impossible. is there a fix?

    Internet connection times out when downloading update ios5. get to last 0.01 of data, says processing file and then says connection timed out. Is there a fix?
    I am using itunes 10.5. Update didnt work on last software but restore did work. Help

    After two days of attempts, Google & Apple searches, one Apple post stated to turn off all firewalls and virus software and keep trying since there were 6 gazillion people trying to update.  I have Windows 7 & Kaspersky and had to diable every single safety feature in Kaspersky as well as Firewalls and it finally allowed the download and update attempt. 
    Glancing at the forum, there appears to be numerous other problems with missing pictures, text problems etc after the IOS5 download but fortuneately, everything seems ok so far.  Good luck, it is frustrating!  Hattie47

  • When I try to log on to icloud it says "Apple ID is valid but not an icloud account? Changed my Apple password a few times reset my system still no luck Please help!t

    When I try to log on to icloud it says "Apple ID is valid but not an icloud account? Changed my Apple password a few times reset my system still no luck Please help!t

    Welcome to the Apple community.
    These types of messages often indicate a problem with the devices serial number, have you had your phone repaired at any stage or did you buy it second-hand.

  • My mac keeps highlighting different boxes all the time and a text box has appeared on the screen that says what box is highlighted if the sound is turned up when you press a key or click on a box you are informed of the action any ideas what i can do?

    Hi my Mac keeps highlighting different action boxes (on its own) all the time a strange text box has appeared on the screen that informs you if you press a key or click on a item. if the sound is turned up you are informed when a item is highlighted or a you click on a item HELP!

    Hi Thanks for your help fixed the problem
    Kind Regards
    Nannedee

  • Stopping timer reset in JSP page when it is refreshed?

    hello there
    iam making online examination system using jsp&servlets
    and in the test page i use a javascript timer and i want to prevent the timer from being reset when the page is reloaded(refreshed)
    since disabling refresh functionality is a bad behavior,is there's any way to do that?

    Using a cookie is a bad approach IMO. It is STILL clientside.
    Anything you send to the client can be doctored.
    You have to retain the timestamp on the server - most probably within the session.
    Sure, the jsp page can use javascript to display a countdown timer on the page, but the authorative time has to be from the server.
    So you store in session the time when the user starts the test.
    If they refresh the page, it should find that variable, see that the test is already started, and send them back an appropriate updated time.
    cheers,
    evnafets

  • Nslookup: DNS request timed out. time out was 2 seconds. (When the primary DNS is down)

    Hi All,
    I have set up 2 Windows Server 2012 domain controllers (DCA & DCB). DCA points at DCB as the primary DNS, and itself as the alternate DNS. DCB points at DCA as the primary DNS, and itself as the alternate DNS.
    When both DCs are running and if I do an nslookup on DCA: The result is as follows:
    Default Server: dcb.testdomain.com
    Address: 30.30.30.2
    nslookup on DCB:
    Default Server: dca.testdomain.com
    Address: 30.30.30.1
    Client PC (Windows 7 Pro):
    1st DNS : 30.30.30.31
    Alternate DNS: 30.30.30.32
    nslookup on the client PC
    Default Server: dca.testdomain.com
    Address: 30.30.30.1
    Up to here everything is fine. Now if I turn off DCA, and do an nslookup, the result is as follows:
    DCB nslookup:
    DNS request timed out.
           time out was 2 seconds.
    Default Server Unknown
    Address: 30.30.30.31
    Client PC nslookup:
    DNS request timed out.
           time out was 2 seconds.
    Default Server Unknown
    Address: 30.30.30.31
    I waited for more than 15 minutes an tried again, it didn't help.
    I have been reading a few similar posts on this matter, but couldn't find the answer.
    I would  expected it to display the DCB when I do an nslookup.
    Question 1: Shouldn't that display DCB rather than displaying a time out message when I do nslookup?
    Question 2: The fact that it displays a time out message, does it mean that more configuration needs to be done? If so please kindly advice what needs to be done. 
    I did an ipconfig /displaydns command. I realized that the order of DNS have changed on both DCB and the Client PC:
    Now, they both display DCB on the top of the list, whereas they were displaying DCA on the top of the list prior to the shut down.
    Question 3: Does it mean that the Client PC now knows that the 1st DNS is down and so it's using the 2nd DNS?
    If so, why does the nslookup display the time out message?
    Question 4: Is it possible to configure either of DNS Server or the DNS client, so it displays the 2nd DNS when the first DNS is not accessible and when I do nslookup?
    Thank you for. 

    Hi Ton_2013,
    Based on my understanding, the issue we are experiencing is that: when the primary DNS server is down, the result of the tool Nslookup is to diaplay the time out message at first. Right?
    Based on my knowledge, timed out message is means that the server did not respond to a request after a certain amount of time and a certain number of retries. Because the primary DNS server is down, it can't respond to this request and time is out. When
    the primary DNS server can't respond, the secondary DNS server works to ensure effective work. And the order is changed as you said.
    As to the reason why the result is still the same even when the order has changed, we can try to use Network Monitor to capture network traffic and view and analyze it to find the cause. And the cause may be the cache. For your information, please refer
    to the following link to download the tool Network Monitor:
    http://www.microsoft.com/en-hk/download/details.aspx?id=4865
    Regards,
    Lany Zhang

  • Can not delete text messages without phone freezing when i reset it text messages are back

    can not delete text messages without phone freezing when i reset it text messages are back...help taking up a lot of space.

    Try this...
    Close out all apps (double click the home button and swipe up) then delete one thread.  Do a hard reset of the phone or ipad, then wait a few minutes and it should be gone.  I just did this with a thread that had thousands of txt and it worked for me.  The older phones just don't have much processing power.

  • How to trigger email notification when users fail to reset your password in fim 2010 r2.

    Hi,
    how to trigger email notification when users fail to reset  your password in fim 2010 r2
    Regards
    Anil Kumar

    Hi Sylvain,
    I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
    check Advance View of Set this gives
    <Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
    xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
    But this is not working for me so please tell me where i am wrong.
    Regards
    Anil Kumar

  • How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

    Hi,
    How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
    Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
    Regards
    Anil Kumar

    Hi Sylvain,
    I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
    check Advance View of Set this gives
    <Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
    xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
    But this is not working for me so please tell me where i am wrong.
    Regards
    Anil Kumar

  • When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

    while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

    I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
    "How do I text message multiple people at once?"
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html
    Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
    (If this has answered your question, please mark your original post as answered)

Maybe you are looking for

  • Trying to underline the rectangle of a Text Field

    I am trying to underline the rectangle of a Text Field with a Line Annotation, but I am a little confused. The first doubt is about the "Square" vs, the "Rectangle" annotations. What is the difference between them? Has Adobe changed those recently? I

  • Problem with Hyperlink Behavior

    Hi all. In my lasts posts i was trying to make a dropdown menu with some properties, this menu, is activated with the onclick event, in a table, the menu works fine with an image component and his onclick action, shows, and dissapear as i want, the t

  • Calling applet in jsp file

    Hi al, When we try to invoke an applet from jsp, applet class is not able to initialize (not able to load the class) Exception got in java console as follows : Load: class SignedAppletDemo.class not found. java.lang.ClassNotFoundException: SignedAppl

  • Insbridge--Rate Manager--Unable to locate output schema selection.

    hi, im getting the following error while testing / executing a rating or underwriting program Rating Error Unable to locate output schema selection. Rating Summary ID Values Program Name Program not found! Parent ID 1020 Line Of Business 3 Program ID

  • This Patch Package could not be opened

    Adobe Reader 8.3.1 will not work. It can't be deleted. Adobe won't help unless I pay them $40.00. HELP!