Times in various apps reported incorrectly in iOS7

The current time in apps such as calendar, mail, dijit remote, and weather appears incorrectly in iOS7. This seems to occur sporadically. I have checked settings>general>date&time and the phone is set to 12 hour format, set automatically is on, and time zone is New York which is correct. Location services for these apps is set to on. I have also tried a soft reset of the phone. Is anyone else experiencing this bug?
I have noticed several bugs (this being one of many that I am reporting) since upgrading to iOS7 which has been very disappointing. I am a huge Apple advocate and this has not been the experience of "It just works" that I have come to expect from my Apple products. It is because I care so much about the Apple ecosystem that has made my work and play so much more enjoyable that I will take the time to report these in hopes that Apple will take notice and that subsequent updates will address these issues.

Trying logging into FaceTime instead.
I was having this issue as well and tried many times to get iMessage to authorize.
I kept getting the "check your network connection" error.
I went to my FaceTime preferences and noticed it was "waiting for authorization" as well.
When I logged in under FaceTime my ID & Password were accepted.
Then I returned to iMessage and I was logged in there as well.
Seems like the FaceTime setting was able to override the glitch in iMessage.
See if that works for you too.

Similar Messages

Is there a way to open different books on various apps at the same time like in android devices?

hello good peolpe, i bought an ipad mini retina for books reading and i would like to know if there is a way i can open a book with different apps like i do on android device where you can use various apps to open differents books at the same time, i would like to also know if there is a way to do the same thing but with power point and word files, and how can i open them on my ipad and transfer them, thanks every one for their time

Currently you can't. Maybe in iOS 8 that will be released soon.
 Cheers, Tom

I made a new apple account but every time i download a new app it says i need to put in my old accounts password and every time I do it says incorrect how do I fix this?! I need help!

I made a new apple account but every time i download a new app it says i need to put in my old accounts password and every time I do it says incorrect how do I fix this?! I need help!

As rex already mentioned, Apps and other content are forever tied to the Apple ID that was used to purchase them. No transfers. No combining Apple IDs. Forever means forever.
In practice, this means any apps you currently have - free or paid - will need to be either repurchased using your new Apple ID or downloaded again if free. Until you refresh all of your apps, your iPad will ask for credentials to the old Apple ID any time one of the apps is updated.
Why did you feel it was necessary to create a new Apple ID?

"no data found" run-time error masking SQL/report mismatch

Hi all,
At last, figured out a vexing problem and wondering if anyone else either:
a) has also hit the problem, and hopefully
b) has figured out a clever way around it.
Namely, in our AppEx apps, we rely on SQL query generation from PL/SQL packaged functions. This "best practice" promotes reuse, automated testing, etc. Great idea - works great.
However, we've repeatedly come across a situation where we go to run a page with a report on it only to get a "report error: ORA-01403: no data found" message where the report should be. Not much to go on. After trial and error, it turns out that simply going to the Region Definition page (where the PL/SQL function call is defined) and clicking the "Apply Changes" button cleared the problem up.
Mystifying because the actual SQL query generated by the PL/SQL is valid (we've got a nightly testing job that pulls the PL/SQL function calls out of the AppEx metadata tables, executes them to get back the SQL and then validates the SQL).
Turns out this problem looks to be a result of columns changing in the actual SQL itself, and hence not matching up to the Region Attributes (column names, one assumes) that AppEx knows about. Simply clicking Apply Changes causes AppEx to validate the returned query and then it adjusts the column attributes (one assumes) so that things match up.
So - the $64,000 question(s):
1) Are there any cool AppEx APIs to be able to try and detect this situation? Given an app of middling complexity (50-100 pages, each with various queries/reports), this is not an attractive issue to deal with manually.
2) Any cool AppEx APIs to fix, or auto-sync these situations? (Essentially programmatically calling the "Apply Changes" button if you will).
At a minimum, it would be great if AppEx could be updated to put out some kind of more informative error message when this occurs - maybe something along the lines of "Region Attributes Do Not Match Data Returned from Query", or something like that at least.
Thanks for any input/ideas,
Jim C.

Thanks to all for your prompt responses.
Vikas actually did me the favor of pretty much clarifying my info for me (tks Vikas). Yes, to all the above. It's PL/SQL code generating a SQL query, so 1 is (a); we want to use query-specific columns so it is (2a). And yes, the whole problem is that the something does change to cause the SELECT statement column list to change...nature of the beast, so "don't do that" doesn't really help here.
Scott - sorry, should have been more explicit. Basically, we have a PL/SQL function behind a report that returns a SQL statement for the report. If that PL/SQL code changes to add a new column to the report (without going to the corresponding Report Attributes page and clicking the "Apply Changes" button to get AppEx to revalidate the query), then you wind up with this "no data found" error msg, which doesn't exactly point you to the root of the problem.
It seems as though the "parse at compile-time" is really what's going on here. There must be some kind of "run-time" check going on as well, that is resulting in the "no data found" message. Seems as though it ought to be fairly straightforward to add some kind of check at run-time to handle that exception a little cleaner. Is there an official process to register a "Request for Process Enhancement" for AppEx to do this?
In the meantime, thank you Vikas for the pointer to the APEX_APPLICATION_PAGE_RPT_COLS view - that looks like it will do the trick nicely. Given that, we can now add logic to our nightly "app tester" job that can compare what columns AppEx expects to find in a given report (for a given page) with the actual SQL (coming back from the PL/SQL function call) to essentially "validate" the AppEx meta data and at least let us know when these things get out of sync.
BTW - if anyone would be interested in the actual contents of that "app tester" logic, I'd be happy to post it (someplace...here? Studio site?). It's basically just a PL/SQL block of code that currently runs in cron that just validates any SQL embedded in our app. (I suppose it is a little "hard-coded" since it does use our naming conventions for packages/functions to parse the PL/SQL calls from the Meta Data but it might still serve as a usefull starting point...) Since our AppEx app(s) sit on top of a database schema that is in fairly constant flux, we need the ability to know when somebody has changed something in the schema that needs to be accounted for in AppEx. The job primarily just parses the AppEx meta data to find PL/SQL function calls that return SQL, executes that PL/SQL to get the generated SQL, then just validates that SQL and reports back any invalid SQL calls. Perhaps we're in some unusual development environment (15-20 people working on a database schema with 700-800 tables/views) but it seems as though it would be fairly easy, for anybody using PL/SQL to generate SQL (which is a GREAT and powerful thing, by the way - thanks to whoever thought that up in AppEx land) to run into this issue.
Jim C.

My iPad screen appears to be unresponsive in an invisible line noticeable when using various apps.

My iPad seems to have an unresponsive lnvisible line down the centre so when playing various apps such as words with friends you can't move a letter tile across that line. Occasionally the screen goes crazy like a hundred buttons are being pushed at the one time and it flicks between different screens despite the screen not being touched.

Hm... That's very strange. Are the apps made by the same developer? If so, it may have something to do with that. There may be a fault in the programming.

HT4009 I did not download the in-app purchase at time of original App download, now I cannot figure out how to find and download the in-app purchase. Please help!

did not download the in-app purchase at time of original App download, now I cannot figure out how to find and download the in-app purchase. Please help!

Hello paddyliverpool,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Refund is an option.
Best of luck,
Mario

Mac crash deleted various apps and broke the disk drive. How do I get my apps back?

My Mac 10.8.3 crashed a few months ago. It deleted various apps like garage band and iPhoto etc. During that time my mac also fell breaking the disk drive. I fixed the crash, but I have no clue how to reinstall these applications, especially with the disk drive being broken. Anyone have any ideas?? Thanks!

you need to purchase an external hdd and insert the grey disk 2 whick origionally came with the mac new. this disk contains the applications and apple hardware test.

When you register your credit card for the first time in Mac App store, Does Apple put through a 1 dollar charge to verify the card ?

When you register your credit card for the first time in Mac App store, Does Apple put through a 1 dollar charge to verify the card ? Please I need this answer so as to download the latest Mountain Lion upgrade. Thnx in advance.

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Many folks have reported that this is true. However, the charge is not taken to the second step of completing the charge and the $1 revolves back to your account.

RESOLVED : Windows Phone – Download/In-app reporting fix begins tonight

Update 4/2/15: The processing is complete. The below issue is resolved.
We have identified some download and in-app purchase transactions that were not appearing in the Windows Phone Dev Center dashboard for the November to present timeframe.
We will start the process to add these transactions back tonight. The process will be completed in approximately a week.
Please note the following:
We will add data one month at a time. The most current data will be processed first (March 2015) and then work backwards to November 2014.
As each month is processed, you may see increases in your download/in-app reporting numbers for that month.
You will not lose visibility into any data.
Transactions will continue to be shown in the Windows Phone Dev Center portal, while in parallel, we will add back the historical data.
Only some developers were missing transactions, so you may not see any changes in your download/in-app numbers.
This issue only impacts
Windows Phone download/in-app numbers. Windows Phone payout data, and Windows data is unaffected.
We will update this post when the process is complete.
Thank you,
Patrick

Hello,
Skype for Windows Phone 7 has been discontinued and stopped working. Please read this:
https://support.skype.com/en/faq/FA34489/is-skype-for-windows-phone-7-being-discontinued
Skype für Windows Desktop: v7.4.x.102
Skype für Mac OSX: v7.7.335
↓ Did my reply answer your question? Accept it as a solution to help others. Thanks! ↓
↓ Hat mein Post deine Frage beantwortet? Akzeptiere ihn als Lösung, um anderen zu helfen. Vielen Dank! ↓ .

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck

Why can't I download any apps since updating to ios7

Why can't I download any apps since updating to ios7 ipads running soo slow any help would be appreciated!

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Interesting little app that gives 100% CPU time to your app of choice.

Hi All,
I saw this cool little app that basically shuts down all other non essential processes and gives 100% CPU time to the app of choice. It is called Freeze Frame. Thought it might be worth a look, with all the overloads and all ..... PS - I am not affiliated with this company whatsoever.
http://www.elgebar.com/freezeframe.html
Regards,
Peter

gbrits wrote:
I'm sorry if I explained myself incorrectly. If I were allowed to post the code I would have done so already. I didn't ask you to post your code. I asked you to post structurally similar code that exhibits similar behavior.
I was hoping to get some pointers 'in abstracto' as to what generally may lead to such behavior (i.e not utilizing 100%). Unfortunately, there are about a snotzillion things that could cause the situation you describe. As already pointed out, all we can offer are random guesses, and that's not a productive use of anybody's time.
Perhaps my question was indeed to broad.Yup.
I'll get back to it with a more concrete simplified code example if I can . Excellent.

Various apps require iOS 3.2, but my 1st generarion touch says it is up-to-date with version 3.1.3

Various apps, including Accounts and Wolfram Alpha, say they are available for iPod touch, and apply to iOS 3.2. But I can't get 3.2 on my first generation touch: these statements of requirements and compatibility are now seriously misleading (and expensive).
Is there a way round this?

So the statements are not incorrect; those apps will not work on your model of iPod. They require a newer version of the iPod touch.
Regards.

FRSM Randomly Reports Incorrect Quota Usage

We are using Server 2008 with FSRM 6.1 and are randomly seeing some quotas reporting incorrectly that they are at 100%. If the folder is checked they are well under the quota but FRSM still reports it as 100% even after a refresh.
The only way that I have seen the quotas reporting as normal is when we delete them and recreate them but it returns a few weeks later.
This is only happening on one file server (we have several that FRSM manages the quota allocations for) and disk compression has not been turned on for that volume. This also is not happening to every quota on that volume, only some.
Any ideas?

Hi,
Firstly, please refer to the thread to check if the disk usage of the folder is reported correctly:
Server 2008R2 reports disk size/free space incorrectly in explorer and disk manager
http://social.technet.microsoft.com/Forums/en-US/bf5445d5-e796-4cbb-9571-8639b900cfd4/server-2008r2-reports-disk-sizefree-space-incorrectly-in-explorer-and-disk-manager?forum=winserverfiles
Then check if your current account have permissions to access subfolders. If the user does not have permission to access all subfolder. The size of some folders will not be counted with right click on a folder.
FSRM usage quota incorrect after deletion of 'RECYCLER' folder
http://social.technet.microsoft.com/Forums/en-US/4a076bd3-6e84-4392-9d1a-d93e67a9c319/fsrm-usage-quota-incorrect-after-deletion-of-recycler-folder?forum=winserver8gen
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Times in various apps reported incorrectly in iOS7

Similar Messages

Maybe you are looking for