Tiny printing with Snow Leopard and HP Photosmart C4280

Since I have gotten Snow Leopard on my MacBook, my HP Photosmart C4280 printer only prints reduced size. The HP test page prints fine. I have uninstalled the HP driver and installed the Apple software driver. Nothing helps. Ideas?

Hi Philip & welcome to the forums:
Got to ask if you're sure you have the absolute latest HP drivers from Apple....
http://support.apple.com/kb/DL907
And - also if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure your 3rd party apps are Snow Leopard compatible

Similar Messages

Can't print with Snow Leopard and Acrobat version 8

I have checked this page out: http://kb2.adobe.com/cps/509/cpsid_50981.html
It contains instructions for Version 9. I have version 8. I followed the instructions anyway for deleting the printer but the "save as Adobe pdf" did not appear as the page says it should.
I can still "save as pdf" which is what I have been doing in the past, however the resulting files are huge and there is no ability to apply job options etc.
Maria

The inability to scan is caused by a limitation with the Airport device. The USB port of the AirPort Base Station and Time Capsule does not support printer utilities or other special features, such as scanning, that requires a direct proprietary connection.

Can't duplex print B4 paper size with Snow Leopard and HP8100N

Apple print drivers dumped the standard European paper size B4 (see ISO 216 for specs) many OS's ago, however, I was able to duplex print B4, which is a standard size for the HP8100 trays, using the HP Duplexing accessory, by specifying a 'custom' paper size (10.14 x 14.33). Now, with Snow Leopard and the 10.6.4 and the updated HP8100 print driver from Apple, I get the message "The Duplex Option, Flip on Short Edge" is not available when the destination paper is set to Custom."
It seems the easiest solution would be for Apple to bring back the B4 paper size--I don't know why they eliminated it. The next solution would be for Apple or HP (whoever is responisble for the print driver) to back up to whatever allowed duplexing of custom sizes in all recent OS's up to Snow Leopard.
I have thousands of pages of music to print and manual duplexing just isn't an option. Anybody have any work-around ideas?

try converting your cmyk doocument to rgb and then print

HP Laserjet 4mp won't print with Snow Leopard

My great Laserjet 4mp prints just fine with OS 10.5.8 but not with Snow Leopard (10.6.2) on my new iMac. Have spent three plus hours with senior level Mac Techs to no avail. The printer screen shows the correct printer and driver and indicating valid connection, but when attempting to print I get the message "Unable to print, try again in 30 secs". Since 10.6 doesn't have Appletalk, am unable to use it; techs have tried to use the 4mp driver supplied with Snow Leopard and also downloaded it separately from the web site. We (they) have also tried using all methods (IP, Daemon, and HP Jet Direct using Ethernet and Serial to USB connections). Techs have talked with HP techs and have no other solutions. The security system is off. Any suggestions are welcome! Thanks!

I've read the threads and don't understand some, but I think we (the Apple support techs and I) have tried the ones I recognize. One new idea--in a reply to a similar post someone mentioned being sure to use additional data when using the IP address-- submask address or some such, I
haven't been told to do this--should I? (I can get it from the printer readout if told what to get.) Also, in another post someone suggested deleting the OS 10.5.8 driver that was transferred when all the data from my old iMac G5 was moved over, saying that it would interfere. If true, how do I do that?
What I really need is a stepwise instruction on which connection to use (Ethernet, Serial to USB, or parallel port are the only options); which protocol to use (IPP, Line Printer Daemon, or HP Jet Direct socket, whatever they are); what to put in the Address line (the IP address is the one used by Apple techs); what to put in the Queue line (techs said to leave it blank); what to put in Name and Location blocks, if anything; and what to put in the Print Using line (techs have unsuccessfully tried Autoselect, Generic, and the HP4mp driver selected both from the Select Printer Driver option and from the driver downloaded directly from the HP web site).
I'd be grateful for this help or even advice on where I can get it! (With this new computer I still have free telelphonic Apple tech support but they've given up.) Thanks!

Why won't Lexmark T430 printer with Snow Leopard?

Lexmark T430 will not printer with Snow Leopard. Error Message: “The printer software was installed incorrectly. Please reinstall the printer’s software or contact the manufacturer for assistance.”
The printer is connected via Ethernet from an iMac; I have an airport wireless network. Oddly, I can print wirelessly from my MacBook Pro, but not from my desktop iMac. Both computers were upgraded to Snow Leopard at the same time, but only the iMac refuses to print.
Tried:
-Reset printing system
-Downloaded Lexmark drivers and reinstalled them
-Connected printer directly to iMac instead of through the Ethernet switch
-Repaired disk permissions
When ‘adding printer’ the Lexmark is recognized and configured, but it only results in the same tired error message.
Suggestions will be appreciated.

Hi,
A follow up on my previous report.
I installed 10.6 on an external USB drive and booted my iMac from there. Result: was able to print successfully to the T430, both via Ethernet and via USB cables. Previously, I also tried to print from the iMac (booted from the internal drive) via USB and that failed; although, as I said, I was able to print to a Canon printer. I conclude that there must be some conflict between the Lexmark drivers and something on my internal iMac hard drive.
H

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

Continuing font encoding and tag issues with snow leopard and CS4oI

I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

Move your content to a new Mac - Apple Support

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(

Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days.

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

I have just upgraded to Snow Leopard and have lost my epson printer software. On Epson Aus. web page there is no upgrade of their software for my printer with Snow Leopard. Can i download a lesser operating system software for printer?

I have just upgraded to snow leopard and lost my epson printer software. I have checked Epson Aus web site for printer software but they haven't upgraded it for snow leopard. Am i able to download software for a lesser operating system then snow leopard or do i have to purchase a new printer? The model is stylus photo R310.

Have you tried the R300 or R320 software? Typically the software covers a broad spectrum of printers, often providinbg overlap to cover "relatives" of a series.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 47541&prodoid=47915738&infoType=Downloads&platform=Macintosh

Using Epson Workforce 40 with Snow Leopard and an AirPort Extreme

Hi. Long night working on this but I figured something out, that might help others out there in the same/similar situation.
I have an Epson Workforce 40, and an AirPort Extreme. I had previously set up the EPWF40 (Epson WorkForce 40) before I had installed Snow Leopard. After installing Snow Leopard, the printer would not work and would not be recognized by my MBP 15". The document would just hang and I would have to force quit the printer or delete the document.
Bullet points on how I made it work:
- the most important thing is to have the printer recognized by the router and have an IP address installed and registered first, then you can install the Epson Mac EasyPrint software and "find" the printer over your wireless network
- Goto:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=108743&prodoid=6307 5463&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=28&y=3
and download the Epson EasyPrint v3.10 file called: "epson12433.dmg"
- Unfortunately, Epson does not make software to "install" the printer to the router for Snow Leopard
- I re-installed the printer to the router using my wife's HP laptop and the original CD that came with the EPWF40.
- Follow the instructions on the CD for the install for "First Time" setting up the printer.
- After following the original instructions from the CD on her PC, the router assigned a new IP address to the printer, and the printer was "connected" to the router wirelessly
- Then, on my MBP running Snow Leopard, I ran the dmg file downloaded earlier from the Epson website.
- After running, go to the printer/fax preferences, click the "+" sign and add a new printer.
- As long as you are connected wirelessly to the router, under default, your mac should "find" the Epson printer. It is called something like "EPSON5A2EAA". There should be at least one, if not two options.
- One of the options should be "EPSON5A2EAA Bonjour" and the other "EPSON5A2EAA IP". Click on one, install it, and then go back and click on the other and install it (just to be sure).
- You will not be able to use the standalone Epson Apps installed from the DMG, however, the printer preferences for the epson, will be available through the printer preference boxes when you go through the system preferences.
It didn't make any sense at first for me either. Once I understood that:
- you can't install the printer from a Mac to your router
- after the printer is installed and linked with your router, your Mac can find it and use it
...I was able to complete the installation and have a fully functional wireless network printer.
Feel free to drop me a question. I'm just glad I was able to make it work.
-j

Sota Boy wrote:
I installed Snow Leopard but my Epson WorkForce 500 printer is not compatible. I saw an article about loading Rosetta and this would solve the problem. I can't find the article and I have never used Rosetta.
Actually, you have.
Rosetta was incorporated into both Tiger and Leopard. But it was invisible, of course. Snow Leopard is the first OS that offers the choice of whether to install it or not.
Any suggestions on how I find the recent article or make my printer work with Snow Leopard?
Don't know about the "recent article", but you can install Rosetta by inserting your Snow Leopard DVD and clicking on the Optional Installs package. When the configuration choice window comes up, just check Rosetta alone and carry on.
Good luck with it!
Archie

HP Color Laserjet 1500L no longer prints with Snow Leopard

When requesting a 'print' the HP Laserjet 1500 accepts the job and the 'green light flicks 3 or 4 times and then nothing happens. A check on the queue reveals nothing - however the completed job shows. It was working perfectly well before I installed Snow Leopard recently. Is there anyone out there with the same problem and is there a patch or fix. I have reinstalled the printer and reinstalled driver. Appreciate any help. Thanks! argieanks

Right the 1500L does not work on my machine either. Although, the printer is on my airport extreme usb port, and is recognized as a Bonjour printer, the OS does not find a driver and will not install the printer. I can print through another computer. Unfortunately, I had to keep Leopard on the other computer just to get at the printer from my computer. I guess I cannot use snow leopard on that machine. This 1500L has been a problem for years. It has never been supported properly, and has given me all sorts of issues. In the early days, it kept dropping off my network, through successive operating systems, and then Leopard worked perfectly, until Snow Leopard, and now we are off again, waiting, waiting. Its my view that if a printer works, it should be kept working, not just dropped off the face of the earth...
Message was edited by: rgmichel
Message was edited by: rgmichel

Problems with borderless printing with iPhoto '08 and HP Photosmart Printer

I am trying to print borderless 4x6 photos on HP Photosmart C6250 (same as all HP C62xx Photosmart printers). I am using the HP 4x6 photo paper with the perforated tab. When I select the paper size, I specify Borderless 4x6 in/10 x15 cm (tab). According to the printer manual, the tab should be facing out. I have tried printing with tab out and the tab in. With tab in, it printed the picture leaving white space at the other end equal to length of tab. With tab out as printer specified, it left a white gap at beginning of photo (not as wide as tab) and printed the photo over the perforated tab.
Anyone else figured out how to print using the 4x6 paper with tabs. I also tried printing from the HP software included with the printer and it has issues, too. So, it might be an HP problem, or is it maybe a Mac printing issue with this printer.
Thanks for any help!
Barbara

Barbara:
This is a shot in the dark but take a look at the following topic. It might just help. As they say, any port in a storm.
Topic : iphoto won't print properly to HP photosmart
It does seem like a bizarre solution however. Good luck.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Tiny printing with Snow Leopard and HP Photosmart C4280

Similar Messages

Maybe you are looking for