TMS problem with ECC 6.0

Dear Global Support,
After hardware resizing we have successfully installed ECC 6.0 and
successfully performed DB restoration.
Now the problem lies with TMS as after installation performing necessary post installtion activity
we have configured TMS. As per all TMS check STMS configuration is fine. Even tp and domain
profile are generated.
But issues lies while releasing change request as after realease no data or cofile are populated in
trans/data or trans/cofile.
Even slog is not been generated. Kindly look into this and advice the needful.
Regards,
Partha

Hi Partha,
Is there only one system in the transport landscape at present?
If the transport has been built up in STMS properly, there should be no problem to export.
But you can create a virtual system and create the "transport route" accordingly.
Then when you release a transport, the data and cofiles should be generated.
Is the transport a local transport?
Do you get a message "LOCAL REQUEST .......... released(objects no longer locked)   "
Local request can not be transported so releasing a local request does
not export file to operating level.
If you want to transport this released local change request, you
can create a new reqeust of tranport type "Transport of Copies" from
SE01 and include the objects in <local transport number>.
Then you can transport the content of <local transport> by this newly created
request.
Hope this helps,
Paul

Similar Messages

Account integration problem with ECC 6.0

Hi
We have using PPM 5.0 system with ECC 6.0 system (No EHP). Problem we are facing is we are not able to created the PS project automatically.
I have done already all the necessary settings and in manual case it working fine it seems. I eager to know any suggestions on this to resolve, to achieve automatic creation of project.
Do you feel there is any issue with EHP?
Regards,
Pramod

Hi Pramod,
Refer to the note 1427365 for details. The pre-requisite for PS integration is as below:
SAP Portfolio and Project Management 5.0 SP02
and
SAP ERP 6.0 SP 17
or
SAP ERP 6.0 EhP2 SP07
or
SAP ERP 6.0 EhP3 SP06
or
SAP ERP 6.0 EhP4 SP06
or
SAP ERP 6.0 EnhP5
Regards
Amit

Problem with ecc 6.0

hi experts,
I had installed ecc 6.0 ,
while installation i had selected EP, ep core and Process Integration component also.
i want to configure the SAP XI , how can i do it
plz help me
Edited by: kavitha l on Jan 17, 2008 5:53 AM

Hi,
First you need to read the master guide for ERP2005 carefully,
you need ECC and NW04s component toghether on a single server,
The installation of the following product instances of product version SAP ERP 2005
requires a large amount of memory and makes substantial demands on the host
performance of the CPU:
SAP NW - Adobe Document Service
SAP NW - EP Core
SAP NW - Process Integration
look at sap Note 855534 - Embedded NetWeaver Components in ERP read it carefully,
when you want to use XI/PI with ECC 6.0 ,SAP NW -Process Integration must be set up in a dedicated client
now for configuring XI/PI
login into
service.sap.com -> Release & Upgrade Info -> Installation & Upgrade Guides ->SAP NetWeaver ->SAP NetWeaver PI 7.1
here you can find instalation of SAP PI as well as the basic configuration document
regards,
kaushal

Problem with ECC 5.0 Upgrade in JOB_RASUVAR1 phase of PREPARE

I am upgrading 4.6B system (copy of production to build QA system) on Tru64 with 3TB Oracle DB. The JOB_RASUVAR1 phase of PREPARE in running for about 115 hours. This phase saves existing variants for future conversion. There is a job running at the SAP level which using a lot of CPU, but no active Oracle session for this job. The same job took less than an hour on development system (200GB DB). So far the response from SAP has been like "Unfortunatly there is no possibility to improve the performance of the reports RASUVAR1 and RASUVAR2 during the upgrade" because this phase does not happen during production downtime.
Did anyone else face similar problem?

Hi Kausik,
we recently upgrade our client systems from 4.6c to ECC 5.0, on unix environment. we too faced similar kind of problem, our job_rasuvar1 in prepare phase took almost 70hrs. after raising a msg with SAP, we were asked some correction in function module.."FASU_RS_VARIANT_CONTENTS"..check whether the following changes are already available..or not
<b>the necessary change:</b>
replace the line
PERFORM fill_tables_ps TABLES objects
with the line
PERFORM fill_tables_ps(saplsvar) TABLES objects "CHANGE
in function module FASU_RS_VARIANT_CONTENTS
2) To fix this issue I would recomment, that you stop the JOB_RASUVAR1.
Then please implement the corrections of note 712297. After this please
clear out all the entries in DB tables TASUVCAT, TASUVSVO and TASUVSVD.
You can do thie for example via transaction SE14.
Then implement the following modification to ABAP RASUVAR1:
FORM return_content USING taskname.
RECEIVE RESULTS FROM FUNCTION 'FASU_V_VARIANT_CONTENTS'
TABLES
valutab = gt_params
OBJECTS = gt_objects
EXCEPTIONS
syst_except = 1
communication_failure = 2
system_failure = 3
variant_non_existent = 4
variant_obsolete = 5
error = 6.
g_error = sy-subrc.
g_returned = 'X'.
data: l_count type i. "INSERT MOD
describe table gt_params lines l_count. "INSERT MOD
if l_count gt 20000. "INSERT MOD
g_error = 7. "INSERT MOD
endif. "INSERT MOD
ENDFORM. " return_content
After this you can restart the JOB_RASUVAR1 by just call report
please try with this & let me know. and 1 more thing, this phase again depends on database size (in our case, for 1.8TB it took 6hrs).
with regards,
Raj

Problem with ECC 6.0 upgrade iseries

Hello,
We are upgradering our SAP 4.6c to ECC.6.0 on OS/400. This are the steps which i used to start the upgrade as shown in the Upgrade guide - SAP ERP Central Component 6.0 ABAP Support Release 3
Operating System and Database IBM i5/OS/IBM DB2 for i5/OS
*1. Login with QSECOFR.*
*2 .MKDIR u2019/usr/sap/putu2019*
*3. CHGPGP OBJ(u2019/usr/sap/putu2019) NEWPGP(R3GROUP) DTAAUT(RWX) OBJAUT(ALL)*
*4. LODRUN DEV(OPT) DIR(u2019UMN_OS400_PPC64/UPGRADEu2019)**
*5. Login with the <SID>OFR*
*6. ADDLIBLE SAPUP*
*7. GO SAPUP
8. Here i choose PREPARE but received the following error message: Function check. CEE9901 unmonitored by PREPAREOS4 at statement 0000046300..
When i checked the /usr/sap/put/bin content, i don't see the PREPARE file and also many files are missing. Maybe the LODRUN....didn't worked properly. We used the same CD for the our sandbox and it worked well.
Regards
Niclas
Edited by: Niclas Glenneholm on Dec 15, 2008 12:54 PM

Hi,
Firstly, please ensure you are using the latest SAPup version. You can download it at http://service.sap.com/patches.
Any errors when you call qp2term:
call qp2term
Cheers.

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Error while posting GR from EWM in ECC. "Problem with receiver finding"

Hi
I have completed putaway of inbound delivery in EWM. This has triggered PPF to ECC for GR posting. This is stuck in ECC SMQ2 with error "Problem with receiver finding".
I have checked ECC>EWM interface configuration. Handling unit management setup in ECC and EWM. Do not see any issues there. Also tested GR account postings with IM storage location for Po in ECC. This is also working fine...so no issue with account determination.
Unable to figure out what is causing issue. Please help. Thank you.
Best Regards
phani sai MN

Hi All
Thanks for your responses. Issue was with distrubution model fiter parameters. for message type InboundDelivery.Deliverychange there was additional filter parameter for logical system. Removed values for logical system and only retained warehouse number.
With this issue is resolved. GR is posted succesfully in ECC.
Best Regards
Phani sai MN

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

Problem with TMS config

Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.

Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony

Problem with ITS after ECC 6.0 upgrade

Hi All,
I am facing problems with customized ITS application created based on CATW. It does not work properly after an upgrade to ECC 6.0 from 4.7. Some of the screens user interface is different when i compared that of with 4.7. I came to know that ECC 6.0 uses the Integrated ITS where as 4.7 uses the Stand-alone ITS. What is the difference between them? Is there any way to deactivate the Integrated ITS and run the application on ECC 6.0 as it was before on 4.7?
Any help much appreciated.
Thanks,
Naga Bokkisam

Hello Naga,
can you be more specific about the differences between 4.7 and ECC 6.0? Are you using the SAP GUI for HTML (~webgui 1)?
With best regards,
T. J. Domsalla

ECC 6.0 Problems with transaction TRIP

Hi all, we are working with ECC 6.0 and in the travel management when using the transaction TRIP we saved a travel, we got the error message
"1 PTRV_WEB_ADVANCES_INT , PTRV_UTIL_VSCH"
Following the sap note 871580 as we had enhanced the old structure PRTV_UTIL_VSCH, we now enhance the structure PTRV_WEB_ADVANCES_INT.
But we got the same message.
Can anybody help us?.
Thanks,
Alfonso

The problem was a duplicate data element in one enhancement strucutre

With ECC 5 & BI7 system - Unicode problem

Hi All,
I am facing problem with unicode and Remodiling in BI7.
R/3 - ECC 5
BI - 7
please help me regarding this.
thanks in advance
krish

Hi Premkishan
the following parameter should following value.
login/accept_sso2_ticket---> 1
login/create_sso2_ticket---->1
check in R3 Using RZ10 tcode. if not add it or change ti.
restart the R3 ECC 5.0 server
regards,
kaushal

Problem with UE ZXKKEU11 in ECC 6.0

Hi Guys,
I have a problem with UE ZXKKEU11.
When it was called from VA01 during material insert, the structure i_copa_item is empty and I don't know why.
Have you got any suggestion???
Thank you in advance for any useful answer
If you could I need help urgently. thanks.
Edited by: Salvatore Bruno on Jan 15, 2009 6:59 PM

Hi Salvatore,
Could you help me? I face the same problem you posted some moths ago. In your last message of the thread you said, "The problem was in KEDR configuration".
What was wrong in your configuration?
Thanks in advance 4 ur answer.
llr

Problem with PRD upgrade from 4.6C to ECC 6.0

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

A problem with return order with free goods

Hello
I am working on ECC 6.0
I am facing a problem with the return order the case is I created an order of 1000 pc with inclusive free goods (w/o item generation) condition record that for every 10 pc over the 100 the customer will take 1 free pc
1 pc = 10 $
100 pcs = 900 $
120 = 1080 $
the problem when I am creating a return order with 30 pcs the system calculate the price as if there are free goods the system returns the 30 pcs with 270 $ instead of 180 $ and it should not calculate the free goods because the remaining items are 90 pcs that should not take a free goods discount
Regards
Jacopo Francios

hi ,
Such scenerios can be tackled by different pricing procedure in return scenerio.
See Pricing procedure Depends on sales area + customer pricing procedure + Document pricing procedure .
So for Return document type please maintain different pricing than the normal scenerio this will solve ur problem.
This is generally done also for tackling such scenerios.
Thanks & Regards

TMS problem with ECC 6.0

Similar Messages

Maybe you are looking for