To check the date range
Hi,
I have a table that records the leave for employees. Like employee id , leave start date, leave end date and total hours. I need to find out , if the start date or end date was on weekend , or if the date range includes weekends . And there is one more table that stores public holidays. I also need to check if the leave start date or end date was on the public holiday or the range includes any public holidays.
Thanks
Hi,
Assuming the time of day for all the dates involved is the same (e.g., if they are all TRUNCated DATEs, where the time is 00:00:00), that leave_start_date <= leave_end_date, and that the weekend consiists of Saturday and Sunday, you can do something like this:
SELECT leave_start_date
, leave_end_date
, CASE
WHEN TRUNC (leave_start_date, 'IW') < TRUNC (leave_end_date + 2, 'IW')
THEN 'Includes Saturday or Sunday'
ELSE 'No weekend'
END AS weekend
, CASE
WHEN EXISTS (
SELECT 1
FROM holiday_table
WHERE holiday_date BETWEEN m.leave_start_date
AND m.leave_end_date
THEN 'Leave includes at least 1 holiday'
ELSE 'No holidays'
END AS holiday
FROM leave_table m
;This does not depend on your NLS settings.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for both tables, and also post the results you want from that data, as Andy requested.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.
Similar Messages
-
Hi,
There is a requirement that we need to get date range.This date range will be arrived at using the function module BKK_GET_PRIOR_WORKDAY. The factory calender id is GB. It should return the date range. Therefore, for weekends the date range will be Saturday, Sunday and Monday. The date range will change based on holidays that exist in the holiday calendar.
Now my question is how to calculate that there are two days between friday and monday.
Please help.Hi Nishigandha,
If i am correct you need the number of days between two dates
ex:
date1: 04/06/2009
date2: 12/06/2009
you need the number of days??
then probably check this Fm out:
SD_DATETIME_DIFFERENCE this is a function module which gives the difference in Days and Time for entered two dates
P.S Additionally Chk this out:
/people/mustafabaris.gunes/blog/2009/03/16/calculating-number-of-working-days-in-query-level
Hope its useful
Thanks and Regards
Srikanth.P
Edited by: SRIKANTH P on Jun 4, 2009 2:33 PM -
I just did the update for the software on the 8530. This is a new problem since the update. I cannot lose my old entries, so I am unable to sync at all now until Blackberry addresses this bug.
I have read through all of the "fixes" but none of them work.
My Keep Appointments setting has always (and I verified is still) set to "forever"
I went into the advance settings on the MAC desktop software from Blackberry and tried changing the date range to the suggested 14 days past and 365 days future. I even tried changing the past days parameter to "1" in hopes it would simply ignore old entries... It still wants to delete 435 past entries.
I have to keep these.
Help, Blackberry! Your "update" to the software is overriding my settings and has made the sync function unusable.Christina,
Thanks for the reply. I unchecked all calendars in iCal and synced and it still gave me the same notice. So then I went into the iTunes window and checked the sync only certain calendars box (instead of the all calendars box) and left all the calendars unchecked and clicked apply but when I click on sync it automatically reverts to all calendars.
When you say you unchecked all calendars did you mean in iCal? And what did you have your iCal settings at in your iTunes sync window?
I appreciate your help,
Andrea -
How to check the date and time when a material is blocked
Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
PriyankaHi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba -
Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani SankaranHi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something. -
Creation of internal table dynamically based on the Date Range entered
Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram KandulaHi Sivaram,
I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fCAT1
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
select vbeln
fkart
vkorg
vtweg
fkdat
spart
fksto
from vbrk
client specified
into table gt_vbrk
where mandt = sy-mandt
and fkart in ('ZF5','ZFR')
and vkorg = '1100'
and vtweg = '20'
and fkdat in s_fkdat
and spart = '06'
and fksto = ' '.
if gt_vbrk[] is not initial.
select vbeln
fkimg
prsdt
netwr
matnr
arktx
werks
mwsbp
from vbrp
client specified
into table gt_vbrp
for all entries in gt_vbrk
where vbeln = gt_vbrk-vbeln
and werks in s_werks
and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
name1(3) type c,
s_month type string,
s_month1 type string,
s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
loop at gt_vbrp into gs_vbrp.
gs_final2-matnr = gs_vbrp-matnr.
gs_final2-arktx = gs_vbrp-arktx.
gs_final2-fkimg = gs_vbrp-fkimg.
lv_month1 = gs_vbrp-prsdt.
read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
if sy-subrc eq 0.
name1 = wa_t247-ltx.
endif.
concatenate name1
lv_month1(4) into s_month SEPARATED BY '_' .
CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
gs_final2-month = s_month.
lv_netwr1 = gs_vbrp-netwr.
lv_mwsbp1 = gs_vbrp-mwsbp.
gs_final2-MONTH_QTY = S_MONTH1.
GS_FINAL2-MONTH_VAL = S_MONTH2.
gs_final2-value = lv_netwr1 + lv_mwsbp1.
append gs_final2 to gt_final2.
clear: gs_final2. "lv_name2.
endloop.
if gt_final2[] is not initial.
sort gt_final2 by matnr month ascending .
loop at gt_final2 into gs_final2.
gs_final2_01 = gs_final2.
collect gs_final2_01 into gt_final2_01.
endloop.
endif.
ENDIF..
Regards
Ankur -
How can I check the date of purchase for my MacBook Pro?
I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?
Well, correction, just checked mine...
Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
There is your purchase date. -
Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
NaveenYour calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact. -
I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.
Read http://support.apple.com/kb/ts3367
-
Can I use SYSDATE in the WHERE clause to limit the date range of a query
Hi,
Basicaly the subject title(Can I use SYSDATE in the WHERE clause to limit the date range of a query) is my question.
Is this possible and if it is how can I use it. Do I need to join the table to DUAL?
Thanks in advance.
SteliosAs previous poster said, no data is null value, no value. If you want something, you have nvl function to replace null value by an other more significative value in your query.<br>
<br>
Nicolas. -
MDM ABAP API query to pass the date range
Hi
I want to retrieve certain data from MDM repository based on filter criteria by date stamp.
Not sure how to do it to pass the select option value in the query.
select-options: s_cdate for sy-datum obligatory .
DATA wa_query TYPE mdm_query.
DATA: v_search_date1 TYPE MDM_CDT_DATE_TIME.
data: v_datestamplow1 type string.
data: v_datestamplow type TZNTSTMPL.
concatenate s_cdate-low '000000' into v_datestamplow1
v_datestamplow = v_datestamplow1.
clear wa_query.
wa_query-parameter_code = 'Changed_On '. "Field code ( Field name )
wa_query-operator = 'EQ'.
wa_query-dimension_type = mdmif_search_dim_field. "Field search
wa_query-constraint_type = MDMIF_SEARCH_CONSTR_DATE. "Date serach
I am able to get the data when I just pass the low value from selecct option. But I dont how to pass the date range.
v_search_date1-CONTENT = v_datestamplow.
ET REFERENCE OF v_search_date1 INTO wa_query-value_low.
APPEND wa_query TO gt_query.
CALL METHOD cl_api->mo_core_service->query
EXPORTING
iv_object_type_code = 'Vendors'
it_query = gt_query
IMPORTING
et_result_set = gt_result.
II could see the below operator types . Although EQ says "Like standard select-options parameter" not sure how to pass the value.
EQ Equal to (like standard select-options parameter)
NE Not equal to (like standard select-options parameter)
LT Less than (like standard select-options parameter)
LE Less than or equal to (like standard s-o parameter)
GT Greater than (like standard select-options parameter)
GE Greater than or equal to (like standard s-o parameter
SW Starts with (MDM specific parameter)
Thanks,
Krishna.Hi,
To get the date range for select options, pass the low value with 'GE' operator and another query option with 'LE' operator for high value.
select-options: s_cdate for sy-datum obligatory .
DATA wa_query TYPE mdm_query.
DATA: v_search_date1 TYPE MDM_CDT_DATE_TIME.
data: v_datestamplow1 type string.
data: v_datestamplow type TZNTSTMPL.
concatenate s_cdate-low '000000' into v_datestamplow1
v_datestamplow = v_datestamplow1.
clear wa_query.
wa_query-parameter_code = 'Changed_On '. "Field code ( Field name )
wa_query-operator = 'GE'.
wa_query-dimension_type = mdmif_search_dim_field. "Field search
wa_query-constraint_type = MDMIF_SEARCH_CONSTR_DATE. "Date serach
GET REFERENCE OF v_search_date1 INTO wa_query-value_low.
APPEND wa_query TO gt_query.
concatenate s_cdate-high '235959' into v_datestamphigh1
v_search_date2 = v_datestamphigh1.
clear wa_query.
wa_query-parameter_code = 'Changed_On '. "Field code ( Field name )
wa_query-operator = 'LE'.
wa_query-dimension_type = mdmif_search_dim_field. "Field search
wa_query-constraint_type = MDMIF_SEARCH_CONSTR_DATE. "Date serach
GET REFERENCE OF v_search_date2 INTO wa_query-value_low.
APPEND wa_query TO gt_query.
CALL METHOD cl_api->mo_core_service->query
EXPORTING
iv_object_type_code = 'Vendors'
it_query = gt_query
IMPORTING
et_result_set = gt_result.
Thanks. -
Hi,
Can anybody tell me how to check the date format in BDC while updating.
The system date format is like mm/dd/yyyy. Check the dates format, in case of error return the following message The date format should be YYYYMMDD.
Thanks......Dear Anil,
This is a common problem, when carrying out BDC.
For example, while recording you met with the field --> MKPF-BUDAT.
Go to SE11 --> MKPF --> Search for BUDAT --> Double click on the Data Element i.e. BUDAT --> Double Click on the domain DATUM --> You can see under the block Output Characteristics : Output Length = 10.
While declaring the TYPES Structure, make it CHAR(10).
Consider this technique as the Rule-of-Thumb while doing BDC.
Regards,
Abir
Don't forget to award points * -
My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?
Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful. -
Is there a possibility to check the date on which an app was re-installed?
I am aware of the purchase history which allows me to see when I first time installed a certain app, but when I delete that app from my iPhone then re-install it from the Cloud on another day, say X, the purchase history doesn't help me seeing this date X, which is for me the re-installation date.
Is there a possibility to check the date on which an app was re-installed?
Thank youI read that you say the content should be deleted, so I still wonder if they get deleted, especially after I have just noticed this;
Install an App then delete it while it is running in the background. Head to the store again and install it, you will see that the app is still in the background.
I believe some records of the App exist after deleting it, regardless of who can access them. I will try checking with somebody who has a Jailbroken device.
Maybe you are looking for
-
Install acrobat pro 8 on win 7 64 bit
Hello When i install acrobat pro 8 on win 7 it asks for vista disk. This i have not got as im going from xp. Can you asvise please? Neil
-
Offline Payment Passphrase doesn't work - Solution
Just in case anyone else comes up with this issue with another client. We have been having problems with the offline credit card payment file passwords not being accepted in the Adobe Reader password input window when they are copied from the BC Orde
-
Cannot open wapsite with Blackberry. Other phones open the site.
Hi, I am trying to access the site http://cutit.wap.sh/Stem . This site does not display on my blackberry curve 8520. On the blackberry bold the site works as well as on any other phone. Is there any settings I can change for my phone to show the
-
Schedule Disoverer reports Using OEM
Hi All Has anyone scheduled Oracle Discoverer reports using OEM ? Thanks Diwakar
-
Tomcat Java Servlets, how to log System.out.println() messages
I have recently installed a new (x86) Mac OS Xserve, and am porting some Java application Servlets from an existing older Mac OSX server. All the servlets were working (I am connecting via port 9006). I have carefully used the old JDK 1.4 compiler, e