To create 5 different files in target for each record in the sender file

Hi SapAll,
i have got a a requirement where pi need to create 5 different files with data of each record from the sender side.
Its an file to file scenario
suppose there are 5 rows in a file , then in target side i need to create 5 diff with each one record in it.
Can we do it without using 3 comm channels
Thanks&regards,
Sai

Hey,
As a more generic solution, can you try using MultiMapping. It is supposed to generate multiple instances of messages on receiver side.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
You just need to put a simple logic in Message Mapping to generate new Node for every occurence of source field.
Thanks
Aamir

Similar Messages

Create single message in receiving side for each record in the sender file

Dear Experts,
My Interface is from FILE to MQ (JMS)..
I have a specific requirement in my project, I have multiple files in sender directory ( /tmp)
Ex: FILE_20090202.TXT
FILE_20090203.TXT
FILE_20090204.TXT
FILE_20090205.TXT
And each file has couple of records just shown below:
ABC   123     WER    SER
BCD   345     WEDR    SER
CDE   567     GHTE   DDGG u2026. Etc..
I have to process all the files at a time ( may be I can use file masking by FILE*.txt) , one message has to be created in MQ for each record of the file..
Ex:
Message 1: ABC   123     WER    SER
Message 2: BCD   345     WEDR    SER
Message 3: CDE   567     GHTE   DDGG
Valuable inputs are appiciated !!
Cheers,
Kumar

As already suggested, multi-mapping can be used
You need to set target root node occurrence to unbounded and map root node accordingly
you will have to use enhanced interface determinaion
For detail refer:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Problem with implemnting delete for each record in the report

Hello all,
I am having trouble implementing the following requirement in my application.
In the reports, in each row..I need a delete button. Only few Users( Managers/Administrators) should be able to view this button. Rest should be able to see the normal report. Also when the user clicks on delete, the record should not be actually deleted but a column named Active/Inactive should be made InActive.( The report has only records which are active).
My problem is when the user clicks on edit button, I dont want to go to another page and perform delete operation. I should be able to modify the record in the same report page. Is this possible?
It would be really great if someone can give me inputs on how to do this..
Thanks,
shravanthi

See this link for possible solution:
Coding a delete process
You will need to modify to do your "Delete"
There is also Dene's Wonderful example application that shows a similar idea, but again you will need to modify to get your "delete" status set in the rows
how to update records marked by [row selector] ?
Thank you,
Tony Miller
Webster, TX

File Adapter - Multiple fixed length records in the same file

Hi
I am developing a BPEL process that "Sync Read" a file. The file is a flat file comprising of multiple records and each record is of fixed length. There are no delimiters in the file. I got the xsd associated to this flat file and each element is defined with some fixed length and starting position. The xsd is valid.
When I execute the BPEL Process, I get the following error - I verified the file structure and the position of the fields map correctly. Remember this is not an xml file just a plain text file. Can BPEL process such files or should I always provide an "xml" file?
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="detail"><detail>Start of root element expected.</detail></part><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: Error while translating. Translation exception. Error occured while translating content from file /tmp/inputDir/VDA1.txt ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="code"><code>null</code></part></bindingFault></bpelFault>
Thanks
Shanthi

hi,
see you actually read a XML file and when you read it it is verified by a XSD the location of the XSD is in the XML file it self,
<tns:abc xmlns:tns="http://xmlns.int.aaa.co.uk/xmlns/BPELXXX"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.int.aaa.co.uk/xmlns/BPELXXX *c:/aaa/bbb/ccc/XSD/abc.xsd*">
if the file you are reading is valid then it is read, other wise not, I am not sure about sys read, but in empty BPEL process, if the XML is not validated with the XSD, then the XML is not read, I am still not sure what is the meaning of flat file, are you doing a opaque read?
Yatan

From XML (import) for each record automatic new page creation?

Hello,
I'm playing around with XML.
Can someone tell me where to look and help me?
I load variable data via XML.
Example content xml:
<pages>
     <page>
         <id>1</id>
         <article>title page 1</article>
         <info>Info page 1</info>
         <price>price page 1</price>
     </page>
     <page>
         <id>2</id>
         <article>title page 2</article>
         <info>Info page 2</info>
         <price>price page 2</price>
     </page>
     <page>
         <id>3</id>
         <article>title page 3</article>
         <info>Info page 3</info>
         <price>price page 3</price>
     </page>
</pages>
I have 1 page classified (ie 3 text boxes). The idea is that for each record in the xml (in this case 1, 2 and 3) a new page is created (Qua layout identical to the page that I had prepared, but with the corresponding data in each box)
How do I do this?
Thanks!

If you need to keep the three parts of your page in separate text frames, you are probably out of luck.
I can't tell from your question whether you know how to tag frames and import XML content into them. If you don't, the manual is fairly clear on it. However, it states more than once that "InDesign flows merged XML content into existing frames only." That means that it won't add frames or pages for you -- you can only load XML into tagged frames on the first page and will have to add extra ones by hand.
If you could rework your design so that all the elements could be accommodated in a single text frame, using paragraph styles to keep them apart, you could just import the XML and map tags to styles, then drag it into a frame on the first pages. If your article style was set to start in a new frame, everything but the first would go into overset text, which you could deal with in the usual way -- shift-click on the in port of a new frame and InDesign will add the pages you need.

How to genarate Primary Key for each record in XI Mapping

Hi,
I need to genarate primary key for each record in the paylod in mapping..
Eg: if i have a 10 reacords i need to have a primary key for each record..starting with the
Record      Primary key
First            001
Secound      002
Tenth         010
If i need to write any user defined funtion... can any one provide the code for it.
Thanks
Amaresh

Hi Bavesh,
I will explain with the example:
XML:
<Record 1>
<Primary key>
<value1>
<value2>
</Record 1>
<Record 2>
<Primary Key>
</Record 2>
like above i will be getting n number of recored and in each record i need to genarate primary key in XI.and the key sould be in sequence...
like for the first record 1 secound 2 like that primary key should add to the privous Primary key.
and this is for each payload.
Thanks
Amaresh

Creating a JButton for each line in a txt file

I need to know how to creating a JButton for each line in a txt file then add an actionListener to the number of buttons (note they are in a JTable). Here is a clipet of code thanx for the help (note that this is one part of a program i am making there are 2 more classes. If u need them just ask) Thanx:
class Diary extends JFrame implements ActionListener {
     private JTextArea note;
     private JTextField name;
     private JMenuBar menu = new JMenuBar();
     private JMenu file, edit, font, background, tcolor, settings, help;
     private JMenuItem nu, copy, paste, save, exit, b8, b10, b12, b14, b16, b18, b20, b24, b30, bblue, bred, bgreen, bpink, cblue, cred, cgreen, cpink, eset, nver, using, about;
     private String[] columnNames = {
          "File"
     private Vector dat = new Vector();
     private JTable filetable;
     public Diary() {
          setSize(new Dimension(500, 500));
          setTitle("Diary 2.00");
          file = new JMenu("File");
          menu.add(file);
          nu = new JMenuItem("new");
          nu.addActionListener(this);
          file.add(nu);
          file.add(new JSeparator());
          copy = new JMenuItem("copy");
          copy.addActionListener(this);
          file.add(copy);
          paste = new JMenuItem("paste");
          paste.addActionListener(this);
          file.add(paste);
          file.add(new JSeparator());
          save = new JMenuItem("Save");
          save.addActionListener(this);
          file.add(save);
          file.add(new JSeparator());
          exit = new JMenuItem("exit");
          exit.addActionListener(this);
          file.add(exit);
          edit = new JMenu("Edit");
          menu.add(edit);
          font = new JMenu("font");
          edit.add(font);
          b8 = new JMenuItem("8");
          b8.addActionListener(this);
          font.add(b8);
          b10 = new JMenuItem("10");
          b10.addActionListener(this);
          font.add(b10);
          b12 = new JMenuItem("12");
          b12.addActionListener(this);
          font.add(b12);
          b14 = new JMenuItem("14");
          b14.addActionListener(this);
          font.add(b14);
          b16 = new JMenuItem("16");
          b16.addActionListener(this);
          font.add(b16);
          b18 = new JMenuItem("18");
          b18.addActionListener(this);
          font.add(b18);
          b20 = new JMenuItem("20");
          b20.addActionListener(this);
          font.add(b20);
          b24 = new JMenuItem("24");
          b24.addActionListener(this);
          font.add(b24);
          b30 = new JMenuItem("30");
          b30.addActionListener(this);
          font.add(b30);
          background = new JMenu("background");
          edit.add(background);
          bblue = new JMenuItem("blue");
          bblue.addActionListener(this);
          background.add(bblue);
          bred = new JMenuItem("red");
          bred.addActionListener(this);
          background.add(bred);
          bgreen = new JMenuItem("green");
          bgreen.addActionListener(this);
          background.add(bgreen);
          bpink = new JMenuItem("pink");
          bpink.addActionListener(this);
          background.add(bpink);
          tcolor = new JMenu("text color");
          edit.add(tcolor);
          cblue = new JMenuItem("blue");
          cblue.addActionListener(this);
          tcolor.add(cblue);
          cred = new JMenuItem("red");
          cred.addActionListener(this);
          tcolor.add(cred);
          cgreen = new JMenuItem("green");
          cgreen.addActionListener(this);
          tcolor.add(cgreen);
          cpink = new JMenuItem("pink");
          cpink.addActionListener(this);
          tcolor.add(cpink);
          settings = new JMenu("Settings");
          menu.add(settings);
          eset = new JMenuItem("Edit Settings");
          eset.addActionListener(this);
          settings.add(eset);
          help = new JMenu("Help");
          menu.add(help);
          using = new JMenuItem("Using");
          using.addActionListener(this);
          help.add(using);
          about = new JMenuItem("About");
          about.addActionListener(this);
          help.add(about);
          help.add(new JSeparator());
          nver = new JMenuItem("new Versions");
          nver.addActionListener(this);
          help.add(nver);
          note = new JTextArea("");
          try {
               BufferedReader filein = new BufferedReader(new FileReader("files.txt"));
               String sfile;
               while ((sfile = filein.readLine()) != null) {
                    //add buttons per each line of the txt file and show em
          catch (FileNotFoundException ioe) {
               JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);
          catch (IOException ioe) {
               JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);
          String[][] data = new String[dat.size()][];
          for (int x = 0; x < dat.size(); x++) {
               data[x] = (String[])dat.get(x);
          filetable = new JTable(data, columnNames);
          filetable.setPreferredScrollableViewportSize(new Dimension(100, 500));
          JScrollPane scrollpane = new JScrollPane(filetable);
          name = new JTextField("diary");
          JPanel main = new JPanel(new GridLayout(0, 1));
          getContentPane().add(note);
          getContentPane().add(name, BorderLayout.SOUTH);
          getContentPane().add(scrollpane, BorderLayout.WEST);
          setJMenuBar(menu);
     public void actionPerformed(ActionEvent e) {
          if (e.getSource() == nu) {
               int nuask = JOptionPane.showConfirmDialog(Diary.this, "Are you sure you want to make a new entry?\nThis will erease any unsaved entry's!!");
               if (nuask == JOptionPane.YES_OPTION) {
                    note.setText("");
                    note.setBackground(Color.WHITE);
                    note.setForeground(Color.BLACK);
          if (e.getSource() == copy) {
               note.copy();
          if (e.getSource() == paste) {
               note.paste();
          if (e.getSource() == save) {
               try {
                    String sn = name.getText();
                FileWriter outputStream = new FileWriter("saved/" + sn + ".txt");
                setTitle("Diary 1.00 : " + sn);
                outputStream.write(note.getText());
                outputStream.close();
            catch(IOException ioe) {
                 System.out.println("IOException");
          if (e.getSource() == exit) {
               int exitask = JOptionPane.showConfirmDialog(Diary.this, "Are you sure you want to exit? Any unsaved entries will be deleted");
               if (exitask == JOptionPane.YES_OPTION) {
                    System.exit(0);
          if (e.getSource() == b8) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),8));
          if (e.getSource() == b10) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),10));
          if (e.getSource() == b12) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),12));
          if (e.getSource() == b14) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),14));
          if (e.getSource() == b18) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),18));
          if (e.getSource() == b20) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),20));
          if (e.getSource() == b24) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),24));
          if (e.getSource() == b30) {
               note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),30));
          if (e.getSource() == bblue) {
               note.setBackground(Color.BLUE);
          if (e.getSource() == bred) {
               note.setBackground(Color.RED);
          if (e.getSource() == bgreen) {
               note.setBackground(Color.GREEN);
          if (e.getSource() == bpink) {
               note.setBackground(Color.PINK);
          if (e.getSource() == cblue) {
               note.setForeground(Color.BLUE);
          if (e.getSource() == cred) {
               note.setForeground(Color.RED);
          if (e.getSource() == cgreen) {
               note.setForeground(Color.GREEN);
          if (e.getSource() == cpink) {
               note.setForeground(Color.PINK);
          if (e.getSource() == eset) {
               new UserSettings().setVisible(true);
          if (e.getSource() == about) {
               JOptionPane.showMessageDialog(null, "Created by Collin Doering 2005 in Gr.9\n\nErrors:\n------------------------------------------------------------------\n1. No File Encryption\n2. No user and password Encryption", "", JOptionPane.INFORMATION_MESSAGE );
          if (e.getSource() == nver) {
               JOptionPane.showMessageDialog(null, "New Version |3.00| expected July, 2005\n\nNew Features\n----------------------------------------------\n1. File Encryption\n2. User File Encryption\n3. Full help dialog\n4. More Text changing features", "", JOptionPane.INFORMATION_MESSAGE);
          if (e.getSource() == using) {
               JOptionPane.showMessageDialog(null, "Go ask Collin Doering\[email protected]", "", JOptionPane.INFORMATION_MESSAGE );
THANK YOU

so i still do not understand how i would create one
button per each line in a txt flle then read in the
file that the txt file specified.This assumes you know how many lines there are in the file.
If not, modify as per my prior post
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Testing extends JFrame
String[] linesInFile = {"Hello","World","Goodbye","Now"};
JButton[] btn = new JButton[linesInFile.length];
public Testing()
    setLocation(200,200);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new GridLayout(0,1));
    for(int x = 0; x < btn.length; x++)
      btn[x] = new JButton(linesInFile[x]);//<---this would be where file.readLine() goes
      jp.add(btn[x]);
      btn[x].addActionListener(new ActionListener(){
        public void actionPerformed(ActionEvent ae){
          JOptionPane.showMessageDialog(getContentPane(),ae.getActionCommand());}});
    getContentPane().add(jp);
    pack();
public static void main(String[] args){new Testing().setVisible(true);}
}

Mapping issue: FCC: Idoc for each record in file

Hi,
I have file to Idoc scenario.
I receive csv file with multiple records.
The requirement is to create an Idoc for each record.
For eg.
source file
A1,B1,C1
A2,B2,C2
A3,B3,C3
After FCC
<MT>
<TRANS>
<ROW>
<A>A1</A>
<B>B1</B>
<C>C1</C>
</ROW>
<ROW>
<A>A2</A>
<B>B2</B>
<C>C2</C>
</ROW>
<ROW>
<A>A3</A>
<B>B3</B>
<C>C3</C>
</ROW>
</TRANS>
<MT>
I have first tested it with only 1 record to test end to end connectivity. It works as expected and Idoc is posted to target system.
Now when I am trying to send multiple records, I am getting some issues.
Below are the steps that I have taken to process multiple records:
1. Changed the cardinality of ROW (child of RecordSet) from 1 to Unbounded.
2. Changed the occurance of Idoc to Unbounded.
3. Mapped ROW to Idoc root.
I have tested the mapping in IR and it generates multiple IDOCs.
When I send the test file, it fails with error Tag found instead of tag IDOC BEGIN=
I can see the xml message created with multiple ROWs in XI by File adapter in sxmb_moni.
When I do Test Configuration in ID, with the XML message extracted from sxmbmoni, the result that I got was:_
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
This means that idoc was not created while mapping.
But the same sample message works OK in IR!
Pls help where I have missed.
Regards,
Anirudh.

Sudhir,
Thanks for your response.
FCC is working fine. I have taken the XML message in XI created after FCC from csv sample message.
I have tested this message in IR by placing it between
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
</ns0:Message1>
</ns0:Message>
It is working fine and Idocs are created in mapping in IR.
But the same sample message is creating below output ID!
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
Regards,
Anirudh.

Can I have three different iCloud accounts in my iBook? one for each user of the family? Thanks

I have a computer at home which is used by 5 family members. Each of us have a separate user in the MacBook. Can each of us have a different iCloud account to sincronize with each of our iPhones or once you download the iCloud for one of us, no other iCloud will be added to the same laptop?
Many thanks.

Hi Valeriano009,
Welcome to the Support Communities!
You are already on the right track with 5 individual user accounts on your computer. Please be sure to back up your main Apple ID account before making any changes below.
The article below will explain in more detail ... but it sounds like you will want to create a separate Apple ID for each member of your family to keep their contacts, calendars, Photo Stream etc. separate.
If your family has made a lot of iTunes Store purchases, you can stay signed in to your current Apple ID to have access to them. Or your family members can start fresh with their own iTunes Store purchases. Please review the Frequently Asked Questions section in this article:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Each member of your family should log into their own user account on the computer, and then click on the link below to create their unique Apple ID.
Apple - My Apple ID
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Make sure that the email address you want to use for your Apple ID meets these conditions:
The email address is one that you use regularly, because it will be the primary email address for your Apple ID.
The email address is not associated with any other Apple ID.
The email address is not an iCloud email address, which is already an Apple ID. iCloud email addresses end with @icloud.com, @me.com, or @mac.com.
If each family member is currently using the old Apple ID for their iCloud account on their devices, they will need to follow these steps:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Before you delete the old iCloud account from your iPhone, iPad or iPod touch, turn off each of the features ( contacts, calendars, etc. ) and when prompted, choose to "Keep on My iPhone" if you wish to keep that information. If your family member doesn't need or want any of this information, then skip down to the selection below to delete the iCloud account completely.
Turn iCloud features off
On your iOS device’s Home screen, go to Settings > iCloud, then tap to turn off iCloud features.
When you turn off a feature, you’re asked whether you want your device to keep a copy of your information stored in iCloud for that feature.
Once you have saved the contacts, calendars, etc. that you want from the current iCloud account on your family member's iPhone, then you can delete the old iCloud account from their device.
Turn off iCloud completely
On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
At this point, I would suggest turning off the device, and restarting it. Then, tap on Settings > Mail, Contacts, Calendars. Tap on Add Account. Tap iCloud. Now type in your family member's new Apple ID email address and password.
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
I hope this information helps ....
Have a great day!
- Judy

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Assign different ship to party for each material in a sales order in CRM?

Hi all,
I need to create a sales order in CRM, such that the sales order contains more than 100 materials at item level and each material should be shipped to a different ship to party.
That is for 100 materials in sales order I need to ship to 100 different customers.
The 100 ship to partyu2019s are maintained for the business partner in relation ships tab in /nBP.
The CRM configuration is done in such a way that when we enter a material while creating a sales order in CRM,u2026u2026.a window pops up asking us to select the ship to party for that material.
No I need to replicate this programmatically. I generated a sales order in CRM programmatically using BAPI_SLSTRANSACT_CREATEMULTI. u2026 Now I need to make changes such that I have a provision to assign ship to party for each materialu2026
How can I do this? Can any one tell me if there is a BAPI or Function Module available so that I can assign a different ship to party for each material in sales order?
Regards,
Jessica Sam

Here is sample code. In that highlighted portion is different. check this out
DATA: ls_partner TYPE crmt_partner_com,
        ls_input_fields TYPE crmt_input_field,
        lt_fieldname TYPE crmt_input_field_names_tab,
        ls_fieldname LIKE LINE OF lt_fieldname.
ls_partner-ref_handle = p_iv_handle.
ls_partner-ref_partner_handle = 1.
ls_partner-ref_kind = 'A'.
ls_partner-display_type = 'BP'.
ls_partner-no_type = 'BP'.
ls_partner-kind_of_entry = 'C'.
licensee
ls_partner-partner_fct = '00000069'.
ls_partner-partner_no = w_but000-partner.
INSERT ls_partner INTO TABLE gt_partner.
Bill to party
IF NOT w_con_header-billtoparty IS INITIAL.
    ls_partner-partner_fct = '00000003'.
    ls_partner-partner_no = w_but001-partner.
    INSERT ls_partner INTO TABLE gt_partner.
ENDIF.
IF w_con_header-billtoparty IS INITIAL.
    ls_partner-partner_fct = '00000003'.
    ls_partner-partner_no = w_but000-partner.
    INSERT ls_partner INTO TABLE gt_partner.
ENDIF.
Employee
ls_partner-partner_fct = '00000014'.
ls_partner-partner_no = w_con_header-empresp.
INSERT ls_partner INTO TABLE gt_partner.
+*lsinput_fields-ref_handle = p_iv_handle.*+_
+*lsinput_fields-ref_kind = 'A'.*+_
ls_input_fields-logical_key = ls_partner-ref_partner_handle.
ls_input_fields-objectname = 'PARTNER'.
ls_fieldname-fieldname = 'DISPLAY_TYPE'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'KIND_OF_ENTRY'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'NO_TYPE'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'PARTNER_FCT'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'PARTNER_NO'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_input_fields-field_names = lt_fieldname.
INSERT ls_input_fields INTO TABLE gt_input_fields.

Graphical mapping question - need to create 2 nodes for each record

The mapping is from flat to nested, i.e. flat file to FIDCC2 idoc. Each record has to go to 2 repeated IDoc segments, each one with different posting key. Right now, I have it working for each record to a segment(for one segment) by using splitByValue (value change). How can I repeat the creation of another but with slightly different constant.
Also, how do I add line numbers? I remember seeing a posting on this a while ago - cannot locate it.
Will be Rewarded WELL.
Thanks,
Pam

Hi, Pam
Using the following example to store it as global variable
SetParameter from GloabalContainer:
container.getGlobalContainer ().setParameter ("COUNTER", "0");
GetParameter from GloabalContainer:
String myCounter = (String) container.getGlobalContainer().getParameter ("COUNTER");
When you map to your constant, store it in global variable, then you map other field, get current global variable, check its value, based on the value, you do proper mapping.
Hope it helps
Liang

HT204053 I have one apple ID that my entire family has been using. How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

I have been using one apple ID for 4 family members. Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

stuartx4 wrote:
Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
That has a familiar ring to it

BAPI_PO_CREATE1 not able to create PO's for multiple rows from the flat fil

Hi
i am uploading PO's from a flat file into SAP using the BAPI_PO_CREATE1. Everything works fine if the flat file hast only one record.
if the flat file has more than one record then while loading the second record the BAPI returns a error message. I am calling the BAPI in a loop.
The strange thing is that if i load the second record individually the program is able to create the PO. So only when i have multiple records in the flat file i am unable to load the PO into SAP. I debugged and checked all the internal tables passed to the BAPI. All seems to have the data correctly but still the BAPI fails.
any idea where i am going wrong?
the code looks something like this.
LOOP AT HEADER_ITAB.
   PERFORM FILL_HEADER_RECORDS.
LOOP AT ITEM_ITAB WHERE EBELN eq HEADER_ITAB-EBELN.
     PERFORM FILL_ITEM_RECORDS.
ENDLOOP.
PERFORM CERATE_PO_VIA_BAPI.
ENDLOOP.

What is the error message. Are you trying something like this:
    LOOP AT T_DATA1.
      AT NEW LIFNR.
        READ TABLE T_DATA1 INDEX SY-TABIX.
        PERFORM INIT_TABLES.
        PERFORM FILL_DATA.
--Call the BAPI to create PO
        PERFORM CREATE_PO.
      ENDAT.
    ENDLOOP.
FORM CREATE_PO .
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      POHEADER                     =   POHEADER
      POHEADERX                    =   POHEADERX
    POADDRVENDOR                 =
    TESTRUN                      =
    MEMORY_UNCOMPLETE            =
    MEMORY_COMPLETE              =
    POEXPIMPHEADER               =
    POEXPIMPHEADERX              =
    VERSIONS                     =
    NO_MESSAGING                 =
    NO_MESSAGE_REQ               =
    NO_AUTHORITY                 =
    NO_PRICE_FROM_PO             =
   IMPORTING
     EXPPURCHASEORDER             = EXPPURCHASEORDER
     EXPHEADER                    = EXPHEADER
     EXPPOEXPIMPHEADER            = EXPPOEXPIMPHEADER
   TABLES
     RETURN                       = RETURN
     POITEM                       = POITEM
     POITEMX                      = POITEMX
    POADDRDELIVERY               =
     POSCHEDULE                   = POSCHEDULE
     POSCHEDULEX                  = POSCHEDULEX
     POACCOUNT                    = POACCOUNT
    POACCOUNTPROFITSEGMENT       =
     POACCOUNTX                   = POACCOUNTX
    POCONDHEADER                 =
    POCONDHEADERX                =
     POCOND                       = POCOND
     POCONDX                      = POCONDX
    POLIMITS                     =
    POCONTRACTLIMITS             =
    POSERVICES                   =
    POSRVACCESSVALUES            =
    POSERVICESTEXT               =
    EXTENSIONIN                  =
    EXTENSIONOUT                 =
    POEXPIMPITEM                 =
    POEXPIMPITEMX                =
    POTEXTHEADER                 =
      POTEXTITEM                   = POTEXTITEM
    ALLVERSIONS                  =
     POPARTNER                    = POPARTNER
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT   = 'X'
    IMPORTING
      RETURN = RETURN1.
DATA: L_NAME TYPE LFA1-NAME1.
CLEAR L_NAME.
SELECT SINGLE NAME1
           FROM LFA1
           INTO L_NAME
           WHERE LIFNR = POHEADER-VENDOR.
LOOP AT RETURN.
    WRITE : / RETURN-TYPE,
              RETURN-ID,
              RETURN-MESSAGE.
    WRITE : '--> For vendor:',
             POHEADER-VENDOR,
             L_NAME.
ENDLOOP.
ENDFORM.                    " CREATE_PO

MS word It prints one file for each section of the document

With MS word (2004 and 2008)It prints one file for each section of the document.
somebody can help me with that????

Please post Office related questions on Microsoft's own forums for their Mac products:
http://www.officeformac.com/productforums

To create 5 different files in target for each record in the sender file

Similar Messages

Maybe you are looking for