To create a random table

Hi,
I want to create a random table of 100 records from a table of 20000 records, can anybody let me knwo how can i perform this task.
Best Regards,

Hi,
Please go the following link
fastest way to grab 500 random numbers?
There is a good example .
SELECT yourcolumn FROM
SELECT yourcolumn FROM yourtable
ORDER BY DBMS_RANDOM.VALUE
) WHERE ROWNUM <= # of random values desired;
For example to get 10 random object ids from dba_objects:
SELECT da.object_id, da.object_name
FROM dba_objects da,
(SELECT object_id FROM
SELECT object_id FROM dba_objects
ORDER BY DBMS_RANDOM.VALUE
) WHERE ROWNUM < 11
) iv
WHERE da.object_id = iv.object_id;
Thanks

Similar Messages

  • Dump in include LSKBHF06 of  SAPLSKBH program while creating dynamic internal table.

    Hello Guys,
    We are facing a issue and expecting a support to resolve it.
    Brief Info about the issue:
    We have developed a code which downloads some specific information from database tables from client's system in excel file.
    For that we have used below mentioned method to create the dynamic table.
    cl_alv_table_create=>create_dynamic_table.
    Now this code is successfully executing in our system and giving us the required output. But when client is running this code in their system they are getting a dump.
    Dump Details:
    Runtime Errors LOAD_PROGRAM_NOT_FOUND
    Exception              CX_SY_PROGRAM_NOT_FOUND
           Occurred on     12.03.2014 at 11:01:51
    Program " " not found.
    What happened?
    There are several possible reasons for the error:
    or
    The current ABAP program had to be terminated because the
    ABAP processor detected an internal system error.
    The current ABAP program "SAPLSKBH" had to be terminated because the ABAP
    processor discovered an invalid system state.
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "FB_TABLE_CREATE_STRING" "(FORM)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
    However, program " " does not exist in the library.
    System environment
    SAP Release.............. "620"
    Application server....... "gs-sh110"
    Network address.......... "10.2.95.17"
    Operating system......... "Linux"
    Release.................. "2.6.16.60-0.39.3-smp"
    Hardware type............ "x86_64"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 1
    Short dump setting....... "full"
    Database server.......... "gs-sh110"
    Database type............ "ORACLE"
    Database name............ "H15"
    Database owner........... "SAPORA"
    As per the dump we  have tried to find the root cause of the issue and found in debug mode that in 'SAPLSKBH' program in SE38 in include 'INCLUDE LSKBHF06' program name SAPLSKBH is converted in some random generated program by sap ex. '%_T008F0' which is passed in the perform 'TABLE_CREATE' of the program generated dynamically.
    If this program name does not exists in the system then system will generate the dump
    Program " " not found as show in the dump received.
    Please find the short dump attached.
    Please help to solve the issue.
    Regards.
    Abhinav Goel.

    Hi Abhinav,
    I tried it myself in our system in debug mode. If SY_REPID is empty, l_name is set to %_T0000L (in our system) by GENERATE SUBROUTINE POOL and code line
       perform (l_form) in program (l_name).
    is a
       perform TABLE_CREATE in program %_T0000L.
    This works fine.
    But in your dump field l_name is still empty. This shouldn't be after a successfully processed GENERATE SUBROUTINE POOL.
    But SY-SUBRC seems to be 0 and l_message seems to be empty.
    In Your client's system, please try to check it
    - on a DEV system with open system settings (system client should allow changes)
    - with an user, who has developer's authorities and a registered developer key in table DEVACCESS
    Please tell us, if the issue remains after that.
    Regards,
    Klaus

  • Would I like to create a zero table?

    Hey,
    I am creating an encrypted HDD to install Arch 64 on, and I've just run dd to wipe and randomize the disk. Opening cfdisk to create the partitions (one boot, one for LVM), I am asked if I wish to create a zero table.
    Not really sure what this is, and I assume I want to as saying no does nothing, but I wanted to find out what it actually meant? Almost sounded like it wanted to start zeroing out my random data, which would obviously be bad!
    Cheers!

    tsv wrote:Well, the point of generating the random data across the entire disk is so you can't tell where the encrypted data begins and ends. If there is a large chunk of zeroes on the disk, it implies that there's no data there to attempt to decrypt.
    I am by no means an expert on crypto, but from what I have read the only definite advantage you get from this is that no one can easily see how full your disk is (respectively how full it was at some point in time). It also might make it more difficult to find out which encrytion is used and thus delay any attempt to break it. The way I see it, if you assume that your crypto will be broken, this doesn't help at all, as an attacker would just decrypt the whole partition.
    Anyway, far be it from me to stop your healthy paranoia and having random data on the disk certainly doesn't hurt. Just keep in mind that things which seem obvious often are not when it comes to crypto.

  • Issue creating a Database table with a decimal key field

    Hi guys!
    Can you try this?
    - Create a Database Table ZTEST via SE11 with just the client field and a decimal field (which has to be a key field)
    - Create a corresponding text table for ZTEST with SPRAS, and a TEXT field
    - Create the dialog maintance view and enter some random data through SM30 (5 or 6 rows)
    Then go to SE11, display table ZTEST and click contents to show the data you just entered.
    Is there anything strange? In my case there is, actually: Not all text fields are shown, nevertheless if i try to display the data through SM30 the data is shown correctly....
    I've tried this in several releases and is always the same.
    Do you know why this is?
    Thanks in advance.

    Thanks for the answer.
    Unfortunately, this is not the case, the tables are correctly linked.
    Please look at the following snapshot, the first one, corresponds to the SE11 of the original table, the second one is the SE11 of the text table, and finally the third one is the SM30 of the original table.
    [Snapshot|http://img100.imageshack.us/img100/5071/testkl.jpg]

  • How can I create a new table in a MySQL database in MVC 5

    I have an MVC 5 app, which uses MySQL hosted in Azure as a data source. The point is that inside the database, I want to create a new table called "request". I have already activated migrations for my database in code. I also have the following
    code in my app.
    Request.cs: (inside Models folder)
    public class Request
    public int RequestID { get; set; }
    [Required]
    [Display(Name = "Request type")]
    public string RequestType { get; set; }
    Test.cshtml:
    @model Workfly.Models.Request
    ViewBag.Title = "Test";
    <h2>@ViewBag.Title.</h2>
    <h3>@ViewBag.Message</h3>
    @using (Html.BeginForm("SaveAndShare", "Home", FormMethod.Post, new { enctype = "multipart/form-data" }))
    @Html.AntiForgeryToken()
    <h4>Create a new request.</h4>
    <hr />
    @Html.ValidationSummary("", new { @class = "text-danger" })
    <div class="form-group">
    @Html.LabelFor(m => m.RequestType, new { @class = "col-md-2 control-label" })
    <div class="col-md-10">
    @Html.TextBoxFor(m => m.RequestType, new { @class = "form-control", @id = "keywords-manual" })
    </div>
    </div>
    <div class="form-group">
    <div class="col-md-offset-2 col-md-10">
    <input type="submit" class="btn btn-default" value="Submit!" />
    </div>
    </div>
    @section Scripts {
    @Scripts.Render("~/bundles/jqueryval")
    HomeController.cs:
    [HttpPost]
    public ActionResult SaveAndShare(Request request)
    if (ModelState.IsValid)
    var req = new Request { RequestType = request.RequestType };
    return RedirectToAction("Share");
    The point is that, I want the user to fill the form inside the Test view and click submit, and when the submit is clicked, I want a new entry in the new table to be created. But first of course I need to create the table. Should I create it using SQL query
    through MySQL workbench? If yes, then how can I connect the new table with my code? I guess I need some DB context but don't know how to do it. If someone can post some code example, I would be glad.
    UPDATE:
    I created a new class inside the Models folder and named it RequestContext.cs, and its contents can be found below:
    public class RequestContext : DbContext
    public DbSet<Request> Requests { get; set; }
    Then, I did "Add-Migration Request", and "Update-Database" commands, but still nothing. Please also note that I have a MySqlInitializer class, which looks something like this:
    public class MySqlInitializer : IDatabaseInitializer<ApplicationDbContext>
    public void InitializeDatabase(ApplicationDbContext context)
    if (!context.Database.Exists())
    // if database did not exist before - create it
    context.Database.Create();
    else
    // query to check if MigrationHistory table is present in the database
    var migrationHistoryTableExists = ((IObjectContextAdapter)context).ObjectContext.ExecuteStoreQuery<int>(
    string.Format(
    "SELECT COUNT(*) FROM information_schema.tables WHERE table_schema = '{0}' AND table_name = '__MigrationHistory'",
    // if MigrationHistory table is not there (which is the case first time we run) - create it
    if (migrationHistoryTableExists.FirstOrDefault() == 0)
    context.Database.Delete();
    context.Database.Create();

    Hello Toni,
    Thanks for posting here.
    Please refer the below mentioned links:
    http://azure.microsoft.com/en-us/documentation/articles/web-sites-dotnet-deploy-aspnet-mvc-app-membership-oauth-sql-database/
    http://social.msdn.microsoft.com/Forums/en-US/3a3584c4-f45f-4b00-b676-8d2e0f476026/tutorial-problem-deploy-a-secure-aspnet-mvc-5-app-with-membership-oauth-and-sql-database-to-a?forum=windowsazurewebsitespreview
    I hope that helps.
    Best Regards,
    Sadiqh Ahmed

  • Error while creating the DWH tables using DAC

    Hi,
    I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
    Please find the below mentioned error message
    =====================================
    STD OUTPUT
    =====================================
    CREATING SIEBEL DATABASE OBJECTS
    F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
    Error while importing Siebel database schema.
    =====================================
    ERROR OUTPUT
    =====================================
    Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
    Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
    This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
    San Mateo, CA 94404.
    User agrees that any use of this software is governed by: (1) the applicable
    user limitations and other terms and conditions of the license agreement which
    has been entered into with Siebel Systems or its authorized distributors; and
    (2) the proprietary and restricted rights notices included in this software.
    WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
    UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
    OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
    PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
    If you have received this software in error, please notify Siebel Systems
    immediately at (650) 295-5000.
    F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
    Connecting to the database...
    28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
    Unable to connect to the database...
    any help is appreciated.
    Thanks,
    RM

    The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
    The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
    Please mark if useful/helpful,
    Andy.

  • Error while creating Cross-reference table using Xreftool (PIP Ins)

    Error while running xref.sh script unable to create cross reference table.
    **Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool**
    Could not find xref directory within tip folder (/OracleAS_1/bpel/docs/workflow/oracle/tip)
    searched for similar issue in OTN it says issue fixed by upgrading Oracle AS, we are using 10.1.3.4 MLR#8
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=835446
    steps followed.
    Creating Cross-Reference Tables
    Complete the following procedure to create cross-reference tables.
    To create cross-reference tables
    1 Navigate to the following directory:
    %SOAHOME%/SiebelODOPPIP/scripts/
    2 Open the following file for editing:
    xref.sh
    3 Set the userid and passwd for logging into BPEL console on the appropriate lines.
    4 Set the correct SOA_HOME location on the appropriate line.
    5 Save and close the file.
    6 Make the file executeable:
    chmod +x xref.sh
    dos2unix xref.sh
    7 Change directory (cd) to integration/esb/bin under %SOAHOME%.
    8 Execute ../../../SiebelODOPPIP/scripts/xref.sh.
    I am using SOA suite 10.1.3.3 and getting same error
    Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool

    Hi Abhijeet,
    please check in transaction FI01, about your data consistencies. You can use this wiki help in terms of Address, it it found any useful facts for you
    Address Checks - Business Address Services (BC-SRV-ADR) - SAP Library

  • How do I create new user table in program and then access it?

    I am writing an application where I check for the existence of user objects when the add on starts and run the setup if the objects do not exist. I can create the user tables and fields but after the setup completes these objects still are not visible.
    If the user objects exist when the add on is first run everything is detected correctly.
    When a user object is added in SAP the user is eventually prompted to restart so I suspect something needs to happen prior to the add on being able to use the new fields.
    Does the add on need to wait for the DI Server to perform some action? Do I need to just quit the add on's class and rerun it, disconnect and reconnect to the company, or get a new Application and/or company object?
    What I want to do is figure out a way for the add on to automatically run the configuration if the user tables and fields do not exist yet and then kick off the regular add on code. I haven't seen anyone else's code so I don't know what is recommended or required here.
    Thanks for any assistance!

    I found that the add on can validate the existance of the user fields if I disconnect from the company object, set the SAPbouiCOM.Application and SAPbobsCOM.Company objects to null, set the new application, context, and company objects, and reconnect once more.
    HOWEVER...
    I still have to wait for the client to be restarted manually before I can run any of the form I added to the menu.
    So, I'd still like to know what the best practice is here. Should I just exit after setting up the tables and tell the user to restart SAP?

  • How to create a custom table in the below format

    Dear Friends
              can any one please let me know hot to create a custom table as below
    outpatient
    |employeeno | class | startdate | enddate | spouse |1stchild | 2nchild|  Rate | amount|
    My FO wants to enter in the SM30 as above ......i.e he wants to have spouse ,1st child and 2nd child under one group........so he asking me to make as one group
    and give a heading as outpatient.........similary i have to give for in patient.
    Please could any one tell is it possible.
    regards
    syamala...

    Under the SAP forums section, there is ABAP development and in That there is ABAP General.
    SAP forums > ABAP development > ABAP General.
    Post in that forum.
    Regards
    AK
    Please reward if helpful

  • How to create the custom table?

    Hi, how to create the custom table and how to integrate the table with defferent R/3?
    my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
    Tks
    DPk

    how to create the custom table
    There are two approach in creating a table.
    1. Bottom-up approach
    2. Top-down approach.
    Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
    1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
    2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
    3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
    4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
    5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
    6. Go to data element page and save, check and activate.
    7. Go to main table page and save, check, and activate.
    8. Also, you have to save the technical settings of the table.
    The table is now ready for operation. You can use it in your program or you can use it to enter information.
    Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
    It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
    SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
    how to integrate the table with defferent R/3
    Transport the Table to the another server/client/qas/prd
    Kanagaraja L

  • Creating a Detail Table Based on an Action in Another Table or Matrix to Display in the Same Report (Not a Drill-Through)

    Hello,
    I was wondering if it's possible have a matrix which shows total credits by month and have drill-down groupings to display the invoice numbers for each credit.  Then, once the drill-down is expanded for a particular month, be able to click on the invoice
    number and have another table under the matrix display the details of the invoice. 
    I don't really want a drill-through because that opens a different report in the window, what I want to be able to do is stay on the main report.  I also don't want to drill-into the invoice details from the matrix as that expands the matrix out and
    makes it unruly and ugly.  I've been playing with subreports but not able to get what I want out of it.
    I hope this makes sense - is there a way to do this in SSRS?
    Thanks!!

    Hi AvenueStuart,
    After testing the issue in my environment, we can refer to the steps below to work around the issue:
    Create a new table with the details of the invoice under the matrix.
    Add a parameter named invoice which get available values from the invoice field in the dataset.
    Right-click the [Sum(invoice)] cell to add an action with “Go to report” option, and specify the same report with the parameter below:
    Name: invoice                                                                 
    Value: [invoice]
    Right-click the table to add a filter in the table:
    Expression: [invoice]
    Operator: =
    Value: [@invoice]
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to Create a Temporary Table with SQL Server

    I know you can create a temporary table in SQL Server 2000, but not quite sure how to do it in CFMX 7, i.e., does the SQL go inside a <CFQUERY dbtype="query"> tag?
    I'm pulling the main set of records from an Oracle server (1st data source), but it does not contain employee names, only employee IDs.  Since I need to show the employee name along with the Emp ID, I'm then pulling a list of "current" employee names from a SQL Server (2nd data source), which is the main database on our CF server.
    I've got a QofQ that works fine, except it only matches EmpIDs that exist in both result sets.  Employees who are no longer employed, don't match, and don't display.  Since I can't do a LEFT OUTER JOIN with a QofQ, what I need to do is get the records from the Oracle server into the SQL Server.  Preferably in a temporary table.
    I was hoping if I could get those Oracle records written to a temp table on the main SQL Server, in same database as the Employee Name table, I could then write a normal <CFQUERY> that uses a LEFT OUTER JOIN.
    I think I could probably write a Stored Procedure that would execute the SQL to create the temporary table, but am trying to avoid having to write the SP, and do it the simplest way.
    This query will be a program that can be run hundreds of times per day, with a form that allows users to select date ranges, locations, and other options.  That starts the queries, which creates the report.  So I just need the temp table to exist only until all the SQL has run, and the <CFOUTPUT> has generated a report.
    If the premise is right, I just need some help with the syntax for creating a SQL Server temp table, when you want to write records to it from an external data source.  I'm trying the following, but getting an error:
    <CFQUERY name="ITE_Temp" datasource="SkynetSQL">
    CREATE TABLE #MyTemp
    (   INSERT INTO #MyTemp
    ITE2.TrueFile char (7) NOT NULL,
    ITE2.CountOfEmployee int NULL,
    ITE2.DTL_SUBTOT decimal NULL,
    ITE2.EMPTYPE char (3) NULL,
    ITE2.ARPT_CD char (3) NULL
    </CFQUERY>
    So I actually created a permanent table on the SQL Server, and wrote the below SQL, which does work, and does write the records to table.  I can then write another CFQUERY with a LEFT OUTER JOIN, and get all the records, including those that don't have matching employee name:
    <CFQUERY datasource="SkynetSQL">
    <CFLOOP index="i" from="1" to = "#ITE2.RecordCount#">
    INSERT INTO ITE_Temp
       (FullFile,
       EmployeeCount,
       DTL_Amount,
       EmployeeType,
       station)
    VALUES  ('#ITE2.TrueFile[i]#',
       #ITE2.CountOfEmployee[i]#,
       #ITE2.DTL_SUBTOT[i]#,
       '#ITE2.EMPTYPE[i]#',
       '#ITE2.ARPT_CD[i]#')
    </CFLOOP>
    </CFQUERY>
    But, I hate to have to create a table and physically write to it.  For one, it seems slower, and doing it in temp would be in memory, and probably much faster, correct?  Is there some way to code the above, so that it does something similar, but in a TEMPORARY TABLE?   If I can figure out how to do this, I can pull data from multiple data sources and servers, and using SQL Server temp tables, work with the data as if it was all on the same SQL Server, and do some cool reports.
    Everything I've done for the past few years, has all been from data from a single source, whether SQL Server, or another server.  Now I need to start writing reports where data can come from 3 or 4 different servers, and be able to do joins (inner and outer).  Thanks for any advice/help.  Much appreciated.
    Gary

    While waiting to hear back, I was able to write the query results from an outside Oracle server, to a table on the local SQL Server, and do the LEFT OUTER JOIN required for the final query and report to work.  That was with this syntax:
    <CFQUERY name="AddTableRecords" datasource="MyTable">
    TRUNCATE TABLE ITE_Temp
    <CFOUTPUT query="ITE2">
    INSERT INTO ITE_Temp
    (FullFile,EmployeeCount,DTL_Amount,EmployeeType,station)
    VALUES
    ('#TrueFile#', #CountOfEmployee#, #DTL_SUBTOT#, '#EMPTYPE#', '#ARPT_CD#')
    </CFOUTPUT>
    </CFQUERY>
    However, I was not able to write to a temporary table AND read the results. I got the syntax to run to write the above results to a temporary table.  But when I tried to read and output the results from the temp table, I got an error.  Also, it wouldn't take the single "#" (local) only the global "##" table var, using this syntax.  Note that if I didn't have the DROP TABLE in the beginning, the 2nd time you run this query, you get an error telling you the table already exists.
    <CFQUERY name="ITE_Temp2" datasource="MyTable">
    DROP TABLE ##MyTemp2
    CREATE TABLE ##MyTemp2
    FullFile char (7) NOT NULL,
    EmployeeCount int NULL,
    DTL_Amount decimal NULL,
    EmployeeType char (3) NULL,
    station char (3) NULL
    <CFOUTPUT query="ITE2">
    INSERT INTO ##MyTemp2 VALUES
    '#ITE2.TrueFile#',
    #ITE2.CountOfEmployee#,
    #ITE2.DTL_SUBTOT#,
    '#ITE2.EMPTYPE#',
    '#ITE2.ARPT_CD#'
    </CFOUTPUT>
    </CFQUERY>
    So even though the above works, I could use some help in reading/writing the output.  I've tried several things similar to below, but they don't work.  It't telling me ITE_Temp2 does not exist.  It's not easy to find good examples of creating temporary tables in SQL Server.
    <CFQUERY name="QueryTest2" datasource="SkynetSQL">
    SELECT *
    FROM ITE_Temp2
    </CFQUERY>
    <CFOUTPUT query="ITE_Temp2">
    Output from Temp Table<br>
    <p>FullFile: #FullFile#, EmployeeCount: #EmployeeCount#</p>
    </CFOUTPUT>
    Thanks for any help/advice.
    Gary.

  • How to use create-default-dbms-tables in SQL Server 2000

    Hi everyone,
    I'm new in EJB development. I'm trying to deploy a CMP to Weblogic 8.1 SP1 using
    JBuilderX. I configured a ConnectionPool and DataSource to allow the CMP to access
    the SQL Server 2000. However, I cannot deploy the CMP if I didn't create the table
    in SQL Server manually. Does anyone know how to use the create-default-dbms-tables?

    Refer to
    http://e-docs.bea.com/wls/docs81/ejb/DDreference-cmp-jar.html#1162249
    "Keith" <[email protected]> wrote:
    >
    Hi everyone,
    I'm new in EJB development. I'm trying to deploy a CMP to Weblogic 8.1
    SP1 using
    JBuilderX. I configured a ConnectionPool and DataSource to allow the
    CMP to access
    the SQL Server 2000. However, I cannot deploy the CMP if I didn't create
    the table
    in SQL Server manually. Does anyone know how to use the create-default-dbms-tables?

  • How can I create an active table of content in the sidebar to help readers to get to the section?

    How can I create an active table of content in the sidebar to help readers to get to the section?

    You can create bookmarks with Adobe Acrobat.

  • How can I create a new table from a filed cell?

    Every time that I fill a row of cells I want to creat a new table with the content of that cells.
    How can I do it?
    Donw here it´s the example.
    From the top table, I want to fill these rows, and everytime that it´s done, I want that a new table apears like the cells under.
    There is any Way to do it?
    In the Spanish version of Number I found in the references formulas, one formula called "DIRECTION" that describes to do this.
    But I found no way to do it.
    The above formula it´s this:
    =DIRECCION(row; collumn; type of direction; stile of direction; table name)
    Anyone can help me?
    I really need this solution.

    Otto,
    Based on the syntax you quoted for that function, the english equivalent is "Address". It doesn't create a Table, but rather it creates an Address that references a Cell, in the form of a String. The common, and only, use that I am aware of for Address is to use it as the parameter for INDIRECT. For example: INDIRECT(ADDRESS)) will produce a reference to a table cell, but it will not produce a table.
    Jerry

Maybe you are looking for