To create Shippment notification message

Hi Experts,
I have a scenario as expained below
            Sales Order(SO)                                             Purchase Order(PO)
SRM------------------------------------>XI---------------------->R/3---------------------------->Supplier
    <---------------------------------   <----------------------     <---------------------------
              ASN(referring to SO)                                      ASN(referring to PO)
ASN: Advanced ship notification
The requirement is to send ASN form R/3 to SRM system, whenever we receive it from the supplier.
Please explain how can we create the Outbound ASN message in R/3 to send it to the SRM
And how to relate the Outbound ASN to the Inbound ASN coming into R/3.
please give your valuable suggestions on how to achieve the above requirement.
Thanks,
MK

Thanks Kummari for the quick reply,
can you please explain the process step by step, as I am not familiar with the process.
we receive ASN for all the line items (i.e, >1) completed referring the PO from supplier.
and after which we need to create an outbound ASN referring to the SO, to send it to the SRM system.
please guide me through the process.
I would be a gr8 help.
Thanks.
MK

Similar Messages

Why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message

why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message?

Hey Rkbethel
There are two ways to resolve this for you. For the first is go and do a Reset All Settings by going to Settings > General > Reset > Reset All Settings. It will not delete anything on your iPhone, but it will put all settings back to default. If it does not work, the next step would be to restore the iPhone back to factory settings.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Create a Support Message in Production system showing up in Solution Manage

Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul

Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.

How to change in NOTIF_CREATE - Create Support Notification

Hi
I want to add the following thing in the NOTIF_CREATE
1. Person Responsible-when i use to create message in notif_create my name is not appeared in the F4(I have tried in IMG-Service desk-BP ,but my name is not appeared there)
2.How to create new category?
3.How to use E-mail function in Create Support Notification?
Please help me
Regards,
Neni

Hi
Thanks for u answers,
1. I had already created the BP but still my problem is not solved
2. I am geting this problem-choose the key from allowed name space
3.Can you please tell me what i have to do in in Action profiles
Thanks for ur reply
Regards
Neni

How to create event/notification in SAP using PI.

Hi there,
How to create the event/notification in SAP that triggered by the PI system. Any suggestion appreciated.
Thanks

Hi Mistry
You call a bapi to add the event message to SAP EM.
Below an example:
SAP EM ABAP - Calling a BAPI to create an Event Message in SAP Event Management - Code Gallery - SCN Wiki
Best regards
Eduardo Chagas

How to customize initial secure e-mail notification message

Can we customize the initial secure e-mail notification message with a company logo or any kind of text?
The one that says:
You have received a secure message
Read your secure message by opening the attachment, securedoc.html. You will be prompted to open (view) the file or save (download) it to your computer. For best results, save the file first, then open it in a Web browser. To access from a mobile device, forward this message to [email protected] to receive a mobile login URL.
If you have concerns about the validity of this message, contact the sender directly.
First time users - will need to register after opening the attachment.
Help - https://res.cisco.com/websafe/help?topic=RegEnvelope
About Cisco Registered Email Service - https://res.cisco.com/websafe/about
Basically we want to put our company logo to the top of this message. We already have our company logo added in CRES that shows up when you open the securedoc.html file.
Thanks!

Nevermind, I found it.
Mail Policies > Text Resources > Add Text Resource
Set the type as Encryption Notification Template (HTML), edit the HTML and then also add one with a type Encryption Notification Template (text), edit the text. Then go into the Security Services > IronPort E-Mail Encryption > modify the Encryption profile and choose the new Text Resources created above.
Under Text Resources I was also able to create custom bounce messages with variables that display all the relevant information regarding the bounce.

How to keep a notification message in my lock screen?

For instance, when I receive an SMS I get a notification message in my lock screen. After that, if I unlock my phone, without reviewing/opening the iMessage app, and then I lock it again, is there any way to keep my SMS notification in the lock screen?
Thanks

Hi Sudheer,
U can create a message say "Test" in message pool of Type Info. u can use this message for displaying info messages as shown below.
wdComponentAPI.getMessageManager().reportMessage(IMessage<ur component name>.Test);
i am not sure about the image, just try this.
Thanks and Regards

Customized notification message template in Workflow Builder for iExpense

Hi Gurus!
I have a few requirements to change the notification format of the AME Expense Report Approval Message and one of which is to add a due date of the notification in the subject line of the email. So i have created a new message template, added in some attributes and point the notification to it. It works but in the email body it is missing some sections like the instruction text and the Previously Submitted Expenses section. The new message template has all attributes from the old message template so i'm expecting it to behave exactly the same.
We're on Oracle r12 and i use Oracle Workflow Builder 2.6.3.5.
Can you please help?
Thanks in advance.

Hi Patricia,
For
'358: Activity result code 'RESET' has no transition defined for it. All valid result codes must be modeled with specific transitions or a <Default> transition.',
you may have a function step defined in your workflow which could have a result type like 'Yes/No' but you may have defined the next step for the result type 'Yes' but not for 'No'. so you have to complete the flow for all of the result type of that function step.
for,
'383: Notification activity must be assigned a performer when used in a process.'
Open up the properties dialog of the notification in your process and click on the 'Node' tab, there at then end you can find a property called 'Performer' assign the following,
Type->Item Attribute
Value->Send to Role (or) Send to Email.
I guess this is a late response, but i just fixed these problem for my workflow and hence found your query !!
~ Vivek MS

Global notification message, can't get it to work

Hello,
I was making experiments with the Global Notification message, so I created a page taking a string as input and storing the value in the global variable using the following pl/sql code located in an After-submit process:
HTMLDB_APPLICATION.G_GLOBAL_NOTIFICATION := :P103_MESSAGE;
However the message didn't show up, although I modified my template to display it after the "breadcrumbs" (region position 02).
Then I moved the process in a Before-header position and this time the message displayed as expected (inside the same page).
Since I defined the global message, I expected to see it appear on other pages, as all of them are based on the same template, but it doesn't.
Also, v('GLOBAL_NOTIFICATION') returns null.
I must admit I am puzzled by this behavior.
Please, could someone clarify how this global message is meant to work?
The documentation is not clear on this subject.
Bye,
Flavio

Flavio,
I re-read your original post and the behavior you describe is as expected. Depending on the type of branch you are using, you'll only see the message appear when you set the package global in an OnLoad process (e.g Before Header). If you set the package global onSubmit, its value will be lost on the subsequent page when the branch that follows submits and then redirects. This is because the redirect will cause a whole new database session with new package state to be created. If you set up your branch without a subsequent redirect, the global package variable should still have a value.
Although the global variable is a true global variable in the PL/SQL package sense, it's not a global variable in the HTML DB (logical) session sense. That's what page items and application items are for. The "GLOBAL" in GLOBAL_NOTIFICATION is meant to indicate that anyone running an application which has the appropriate substitution string in its template will see this message. It was really designed to be a broadcast mechanism from the owner of the application to the end users of the application. I hope this clears things up.
Sergio

How to create a Notification which required specific formatted response

Hi,
I'd like ask about the notification.
In the Workflow guide, there are some documentations about the templated message.
I mean that there is a response instructions that should be obeyed in order to get the right action.
I found in the System: Mailer.
There are many example of messages such as
- Orig. Workflow Open Mail (Direct)
- Orig. Workflow Open Mail (Templated)
Those messages' body said about a formatted response, such as
To submit your response, reply to this message, including this note with your reply.
The first lines of your reply must be your responses to the notification questions.
Instructions below detail exactly what should be placed on each line of your reply.
My questions are :
1. What should I do to create a notification such like that?
I mean, how to parse the message and then said to the Workflow Engine about what
will happen based on the respond received?
Since there will be some lookup codes in my workflow definition.
As far as I know, the Message (in Workflow Builder) is only use to specify the
notification's text.
2. Should I use a custom PL/SQL to parse each statement from the response?
Is there any example about how to use the PL/SQL (perhaps how to parse)?
3. Or is it automatically processed by the Workflow if I used the message provided by
the System: Mailer?
4. What if I'd like to make my custom message (instead of using the System: Mailer's
messages)?
Where should I put (or define) my PL/SQL code ?
Perhaps the response should look like this
The first line should be "Yes" or "No"
The second line should be the reasons with maximum length of 100 characters.
5. How to handle if the response is not exactly fullfil the instructions specified in the
message body?
Will there be errors?
Or the Workflow will stop running?
Or the Workflow will wait until the exact response is received?
6. I'd like to know if there is any example of it.
Perhaps, anybody has ever successed to meet these reqiurement.
Many thanks,
Buntoro

Hi,
Thanks Luiz, for the reply.
If I use lookup code, the response will look like in the Worklist of the Workflow Monitor, using some buttons to send the respon. And the button I clicked will determine which path the Workflow will run.
My requirement is the response is using an e-mail (not by clicking any button).
So the Approver should reply the notifications by writing and sending an e-mail, and the text body should look like the requirement I need.
i.e.
The first line of the response (in e-mail) should "Yes" or "No"
The second line is the reason of approving.
So how could I read the e-mail sent, extract it line by line, and inform the Workflow which path should be run.
If the first line of the e-mail is "Yes" then the Workflow will choose the "Yes" path.
else the Workflow will choose the "No" path.
Thanks,
Buntoro

Create quality notification using bapis

Hi all
i want to create quality notification(QM01) using bapi. I know bapi - BAPI_QNOTIFICAT_CREATE can be used to create that. Using this i can create basic quality notifcation.But if you go to transaction QM1, there are two more tabs - validity datetask and materialquantitydelivery date. How to populate these two tabs. Is any other bapi need for the same?

I had to create a notification and fill Material , batch , product cat,Disposition , Reference , priority ,department , coding, description
I had a reference notification and i used the foll code to create new noti.
        SELECT SINGLE zzprdcat zzdispos zzdivisn qwrnum refnum
                      priok qmcod qmkat qmtxt qmgrp objnr INTO
                (gs_qmel-zzprdcat, gs_qmel-zzdispos, gs_qmel-zzdivisn,
                       gs_qmel-qwrnum, gs_qmel-refnum, gs_qmel-priok,
                       gs_qmel-qmcod, gs_qmel-qmkat, gs_qmel-qmtxt,
                       gs_qmel-qmgrp, gs_qmel-objnr)
                              FROM qmel WHERE qmnum = gs_qmel1-qmnum.
        SELECT SINGLE parnr INTO (ihpa-parnr) FROM ihpa
                                    WHERE objnr = gs_qmel-objnr
                                    AND   parvw = 'AB'.
        PERFORM bdc_dynpro      USING 'SAPLIQS0' '0200'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RIWO00-QMART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'RIWO00-QMART'
                                       c_qmart.
        PERFORM bdc_dynpro      USING 'SAPLIQS0' '7200'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=10\TAB02'.
        PERFORM bdc_field       USING 'VIQMEL-MATNR'
                                       gs_mseg-ummat.
        PERFORM bdc_field       USING 'VIQMEL-CHARG'
                                       gs_mseg-umcha.
        PERFORM bdc_field       USING 'VIQMEL-ZZPRDCAT'
                                       gs_qmel-zzprdcat.
        PERFORM bdc_field       USING 'VIQMEL-ZZDIVISN'
                                       gs_qmel-zzdivisn.
        PERFORM bdc_field       USING 'VIQMEL-ZZDISPOS'
                                       gs_qmel-zzdispos.
        PERFORM bdc_field       USING 'VIQMEL-QWRNUM'
                                       gs_qmel-qwrnum.
        PERFORM bdc_field       USING 'VIQMEL-REFNUM'
                                       gs_qmel-refnum.
        PERFORM bdc_field       USING 'VIQMEL-PRIOK'
                                       gs_qmel-priok.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'DIIHPA-I_PARNR'.
        PERFORM bdc_field       USING 'DIIHPA-I_PARNR'
                                       ihpa-parnr.
        PERFORM bdc_field       USING 'RQM02-PARNR_VERA'
                                       sy-uname.
        PERFORM bdc_dynpro      USING 'SAPLIQS0' '7200'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VIQMEL-QMCOD'.
        PERFORM bdc_field       USING 'VIQMEL-QMGRP'
                                       gs_qmel-qmgrp.
        PERFORM bdc_field       USING 'VIQMEL-QMCOD'
                                       gs_qmel-qmcod.
        PERFORM bdc_field       USING 'RIWO00-HEADKTXT'
                                       gs_qmel-qmtxt.
        PERFORM bdc_dynpro      USING 'SAPLIQS0' '7200'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=BUCH'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VIQMEL-QMCOD'.
        PERFORM bdc_field       USING 'VIQMEL-QMGRP'
                                       gs_qmel-qmgrp.
        PERFORM bdc_field       USING 'VIQMEL-QMCOD'
                                       gs_qmel-qmcod.
        PERFORM bdc_field       USING 'RIWO00-HEADKTXT'
                                       gs_qmel-qmtxt.
        CALL TRANSACTION 'QM01' USING bdcdata
                        MODE gc_mode
                        MESSAGES INTO messtab .
Thanks

IDOC to create service notification

Hi All,
I have a new task here to create service notification through IDOC.
I've done some research on the IDOC type (SERVICENOTIFICATION_CREATEFR01) , the message type (SERVICENOTIFICATION_CREATEFROM), process code (BAPI) and the FM tied to this process code (BAPI_IDOC_INPUT1).
I do found the FM that going to be called in this BAPI_IDOC_INPUT1 is IDOC_INPUT_SERVNOT_CREATE which will read data in segments and pass into BAPI_SERVNOT_CREATE to create the notification.
My problem is, I've tried to pass in some data in BAPI_SERVNOT_CREATE (as I'm not sure what is the mandatory field in this BAPI in order to create notification.
I passed in the NOTIF_TYP, NOTIFHEADER-EQUIPMENT and TASK_DETERMINATION. I tested this BAPI in sequence and the next FM to call is BAPI_SERVNOT_SAVE.
The result: Failed.
Can I know what is the mandatory field for this BAPI in order to successfully creating the notification?
p/s: I read the documentation for this BAPI too but clueless.
Thanks for the help.
Best Regards,
Jason

Hi Harris,
Thanks for the advice. After I used this BAPI to see what's the details in it, I tried to put in as much data as possible in the BAPI but without the external_number and task_determination marked as X.
In the export parameters I get in NOTIFHEADER_EXPORT-NOTIF_NO I have this 00000000002.
In the next BAPI to be called is BAPI_SERVNOT_SAVE, it requires to key in the NUMBER as the import parameters. Else, I won't be able to proceed.
I key-ed in 00000000002 into the NUMBER field and obviously it was wrong....
Please help....
Thanks a lot.

Turning off "Delivery Notification" messages

Is it possible to totally suppress messages regarding delivery status from Postmaster? I run a pair of JESMS 6.2 servers which are SMTP relays primarily and the accounts used to send mail are not "people" but services. I'd like the "Delivery Notification: Message has been delayed/failed/etc" to not be generated. I think there's a setting in imta.cnf for this but am wary of the syntax. Can anyone advise what the line should look like?
"defaults notices 1 2 4 7 logging copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 defaulthost blah.com blah.com"
Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
SunOS 5.10 Generic_118833-33 sun4v sparc SUNW,Sun-Fire-T1000

MikeTimbers wrote:
Is it possible to totally suppress messages regarding delivery status from Postmaster?What you propose in contrary to the general nature of email delivery (we strive to not silently 'lose' email which is what this translates too) so there isn't a simple one command to achieve it.
You could prevent notification/disposition emails by using the notificationchannel/dispositionchannel keyword:
http://msg.wikidoc.info/index.php/Dispositionchannel%2C_notificationchannel_Channel_Options
This allows you to change the source channel of these emails. Then by adding a 'discard;' sieve sourcefilter to this new process channel, the emails should be dropped.
"defaults notices 1 2 4 7 logging copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 defaulthost blah.com blah.com"The copywarnpost and copysendpost are the keywords used to control the behaviour of sending a copy of the bounce/notification message to the postmaster. It doesn't control whether the original bounce/notification message is created. If you don't care about these postmaster copies you can disable them by replacing copysendpost with nosendpost and copywarnpost with nowarnpost.
http://msg.wikidoc.info/index.php/Sendpost%2C_nosendpost%2C_copysendpost%2C_errsendpost_Channel_Options
http://msg.wikidoc.info/index.php/Warnpost%2C_nowarnpost%2C_copywarnpost%2C_errwarnpost_Channel_Options
Regards,
Shane.

Can I send notification message to other users?

Hi all,
Can abap webdynpro send out notification messages to other users in a portal? If a new user select some employees that have overwritten other same users selection, I need to send out notification message to other users that their selection have been resetted by this particular user. Can this be done in abap webdynpro?

In NetWeaver 7.0 Enhancement Package 2 there is a new feature called Web Dynpro Notification Service. It lets you send events to any other applications which are listending for that same event id. In a demo that comes with 7.02 we use this technology to create a chat application. However this functionality has to be built into each application. They must have an event handler ready to respond to the event.
So you could build what you describe into your application - but only as of 7.02. 7.02 for the Business Suite comes with BS7i2010 which is currently scheduled to start ramp-up in Q4.

Lately, i received "search setting notification" message popup on starting Firefox 3.6.10. I manually changed my search to Bing. But after closing all firefox windows, it was changed to Yahoo and that notification message.

I am referring to the Search Bar on the upper right corner of the firefox screen. Where there is an option to "Manager search engines...". I even delete the Yahoo entry. But when i restart firefox, i got that "Search Setting Notification" message and the #$@? Yahoo is there on the upper right corner as my default search engine.

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

To create Shippment notification message

Similar Messages

Maybe you are looking for