To define a the menu-followup

Is it possible, to define which menu-area (to be selected) is selected on start? I have one movie with „Play“, „Select chapter“ and „Credits“, where „select chapter“ is in the preview the selected one, I want just to be „start“ as the initially selected
Is this possible? (iDVD 7)
Thank you,
Karl

Means
- starting the DVD in a player
- the first menu-item should be selected
- (or, if I wish so at constructing, the second or what ever)
Would assume the leftmost upmost item is the first item and is slected, but in v7 it is hard to align exactely to achief that.
What would you mean?
~k

Similar Messages

Where Is the MAINMENU Defined in the "Menu Module" Property of MAINFORM

Hello Ya'll Gurus,
I am trying to locate both the MainMenu.mmx and it's source MainMenu.mmb files that is being executed in the application run time, but so far with no luck. I am desperately in need of your help, and the pressure is on...
I have found the following information in our environment and hopefully it will help in resolving my problem:
The following is the command that runs our application:
c:\orant\BIN\ifrun60.EXE C:\MMS\Production\mainform.fmx <userid>/<psswd>@mms
The following are the images of the property palettes for the MainForm and MainMenu forms:
Image for the mainform.fmb property palette:
!http://dot.state.ak.us/nreg/jtomasic/MainForm_Property_Palette.GIF!
Image for the mainmenu.mmb property palette:
!http://dot.state.ak.us/nreg/jtomasic/MainMenu_Property_Palette.GIF!
Please help me with the following questions:
Q1: Since "C:\MMS\Production\mainform.fmx" is included in the command line that runs our application and the "Menu Module" property of the "mainform.fmb" form is "MAINMENU", does it mean the "MAINMENU.mmx" is being executed through mainform.fmx when the application starts running?
Q2: If the answer to the above (Q1) question is yes, the 'MMS' defined in the Menu Filename is then not being used at all, correct? and where can I find the "MAINMENU" file specified in the "Menu Module" property of the "mainform.fmb" form?
Q3: The attached Libraries for the MAINFORM include HMMSHELP, MAINLIBR and MENULIBR. Are these libraries loaded to the MAINFORM dynamically or statically? BTW, the MENULIBR.pll is also attached to MAINLIBR.pll and what does that mean?
Q4: The 'Main Menu" property in the mainmenu.mmb form is defined as "MAIN_MENU" which ties the "MAINMENU" specified in the Menu Module property of the "mainform.fmb" form, correct?
Thanks in advance for any/all the help on this.

Q2: If the answer to the above (Q1) question is yes, the 'MMS' defined in the Menu Filename is then not being used at all, correct? and where can I find the "MAINMENU" file specified in the >"Menu Module" property of the "mainform.fmb" form?Looking at the onlinehelp, the property "Menu filename" may be used if the menu is stored in the database. As far as i know this is not possible since forms 6i (but i may be wrong here). If i'm right, the property is no longer important.
About finding the MAINMENU. I don't know where you find it. If you get no error it seems that it is somewhere on your machine. I would look into the directory C:\MMS\Production first. If its not where, check the FORMS60_PATH-variable and search in the directories listed in that variable.
Q1: Since "C:\MMS\Production\mainform.fmx" is included in the command line that runs our application and the "Menu Module" property of the "mainform.fmb" form is "MAINMENU", does it >mean the "MAINMENU.mmx" is being executed through mainform.fmx when the application starts running?If i'm right about Q2, the answer is Yes.
Q3: The attached Libraries for the MAINFORM include HMMSHELP, MAINLIBR and MENULIBR. Are these libraries loaded to the MAINFORM dynamically or statically? BTW, the MENULIBR.pll is >also attached to MAINLIBR.pll and what does that mean?What do you mean with dynamically or statically?
Q4: The 'Main Menu" property in the mainmenu.mmb form is defined as "MAIN_MENU" which ties the "MAINMENU" specified in the Menu Module property of the "mainform.fmb" form, >correct?I don't understand your question. Forms searches the menu-module which is specified in the property "Menu Module" and "starts showing" the menu which is defined as the "main menu"

Should I define tables in the CSS file or from the Table option on the menu bar?

I am having trouble understanding which table definitions are the ascendant ones: the CSSfile table definitions or the definitions from the Table option on the menu bar. Is there a conflict if I am applying the CSS style to every topic? Who wins...CSS or Table?

Hi there
Sorry, but I think you are a bit confused. I'm assuming here that you are referring to defining tables via the toolbar? Where you use this button?
That simply inserts the table structure which is later styled using CSS.
Then there is the other option where you click Table > Insert > Table and you do two things. You insert the table structure as well as some special CSS codes that are added to your CSS file.
Cheers... Rick

I was working on my spry menu bar and now my sidebar1 photo moves with the menu bar?

I was working on my spry menu bar, and getting really far with it thanks to GRAMPS, and all of a sudden I wanted to put padding of 30px top and 30 px bottom on the sidebar1 photo in the container and now all of a sudden the home.jpg photo in the sidebar moves when you hover over the menu bar.
I can noit for the life of me figure out what changed and somehow was so excited about my spry menu bar working that I did not save the most recent working page. Can anybody look at this with me and let me know what changed to mess the page up on me.
Thanks a million.
Ted
site is located here http://www.subzerorefrigeration.com
None of the links are working I have just been playing with the spy menu for weeks. I finally figured it out and do not belive the error is in the spry style sheets.
Here is the code for my page. I know I am working with a template. I really do not want to start over if a <div> tag is missing.
Any other suggestions would be appreciated.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Sub Zero Refrigeration Heating and Air Conditioning in Midlothian Illinois</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div class="container">
<div class="header">
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="125" height="190" align="left" id="FlashID" title="Sub Zero Refrigeration "Subby" Logo">
      <param name="movie" value="Images/SubbyMovie.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="7.0.70.0" />
      
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      
      
      <object data="Images/SubbyMovie.swf" type="application/x-shockwave-flash" width="125" height="190" align="left">
        
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="7.0.70.0" />
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object>
    <img src="Images/HeaderOriginal.jpg" alt="Sub Zero Refrigeration Heating and Air Condtioning Header Photo" width="834" height="190" align="left" /><br />
</div>
<div class="container" id="navbar"> </div>
<div class="namephoto">
<ul id="MenuBar" class="MenuBarHorizontal">
   <li><a class="MenuBarItem" href="#">Home</a></li>
   <li><a class="MenuBarItemSubmenu" href="#">About Us</a>
     <ul>
       <li><a href="#" class="MenuBarItemSubmenu">Our Staff</a>
         <ul>
           <li><a href="#">Bud Wagner</a></li>
           <li><a href="#">Tim Wagner</a></li>
           <li><a href="#">Dave Allen</a></li>
           <li><a href="#">Terry Burke</a></li>
           <li><a href="#">Larry Skarr</a></li>
           <li><a href="#">Niko Opla</a></li>
           <li><a href="#">Gina Ames</a></li>
           <li><a href="#">Laura Kane</a></li>
         </ul>
       </li>
       <li><a href="#">Our Service Area</a></li>
       <li><a href="#">Our Mission Statement</a></li>
       <li><a href="#" class="MenuBarItemSubmenu">Why Choose Sub Zero Refrigeration?</a>
         <ul>
           <li><a href="#">Our Review's</a></li>
           <li><a href="#">Our Competition's Reviews</a></li>
         </ul>
       </li>
       <li><a href="#" class="MenuBarItemSubmenu">Careers</a>
         <ul>
<li><a href="#">HVAC Technician</a></li>
<li><a href="#">HVAC/R Installer</a></li>
<li><a href="#">Commercial Refrigeration Technician</a></li>
         </ul>
       </li>
       <li><a href="#">Testimonials</a></li>
       <li><a href="#" class="MenuBarItemSubmenu">Easily Leave Us a Review</a>
         <ul>
           <li><a href="#">On "YAHOO"</a></li>
           <li><a href="#">On "YELP"</a></li>
           <li><a href="#">On "MERCHANT CIRCLE"</a></li>
           <li><a href="#">On "GOOGLE PLACES"</a></li>
         </ul>
       </li>
</ul>
   </li>
   <li><a class="MenuBarItemSubmenu" href="#">Repair</a>
     <ul>
<li><a href="#">Commercial Refrigeration</a></li>
<li><a href="#">Commercial Rooftop</a></li>
<li><a href="#">Commercial Ice Machine</a></li>
<li><a href="#">Air Conditioning </a></li>
<li><a href="#">Boiler</a></li>
<li><a href="#">Furnace</a></li>
<li><a href="#">Heat Pump</a></li>
<li><a href="#">Indoor Air Quality</a></li>
<li><a href="#">Schedule A Service Call</a></li>
     </ul>
</li>
   <li><a class="MenuBarItemSubmenu" href="#">Sales</a>
     <ul>
<li><a href="#">Commercial Refrigeration</a></li>
<li><a href="#">Commercial Rooftop</a></li>
<li><a href="#">Commercial Ice Machine</a></li>
<li><a href="#">Air Conditioning</a></li>
<li><a href="#">Boiler</a></li>
<li><a href="#">Furnace </a></li>
<li><a href="#">Heat Pump</a></li>
<li><a href="#">Indoor Air Quality</a></li>
<li><a href="#">Financing</a></li>
       <li><a href="#">Schedule a "FREE" Computerized ACCA MJ8 Equipment Replacement Estimate </a></li>
     </ul>
</li>
   <li><a class="MenuBarItemSubmenu" href="#">Maintenance</a>
     <ul>
<li><a href="#">Commercial Refrigeration Service Agreements</a></li>
<li><a href="#">Commercial Rooftop Service Agreements</a></li>
<li><a href="#">Commercial Ice Machine Service Agreements</a></li>
<li><a href="#">Residential Air Conditioning Service Agreements</a></li>
<li><a href="#">Residential Boiler Service Agreements</a></li>
<li><a href="#">Residential Furnace and IAQ Service Agreements</a></li>
<li><a href="#">Heat Pump Service Agreements</a></li>
</ul>
</li>
   <li><a class="MenuBarItemSubmenu" href="#">Products</a>
     <ul>
       <li><a href="#" class="MenuBarItemSubmenu">Commercial Refrigeration</a>
         <ul>
           <li><a href="#">Beverage Air</a></li>
           <li><a href="#">Beacon Smart Controller</a></li>
           <li><a href="#">Continental</a></li>
           <li><a href="#">Crown Tonka Walk Ins</a></li>
           <li><a href="#">Delfield</a></li>
           <li><a href="#">Heatcraft Refrigeration</a></li>
           <li><a href="#">Hoshizaki Refrigeration</a></li>
<li><a href="#">International Cold Storage</a></li>
<li><a href="#">Kelvinator</a></li>
<li><a href="#">Kolpak</a></li>
<li><a href="#">Larkin Refrigeration</a></li>
<li><a href="#">Perlik Bar and Beverage Equipment</a></li>
<li><a href="#">True Refrigeration</a></li>
         </ul>
       </li>
       <li><a href="#" class="MenuBarItemSubmenu">Commercial Rooftop</a>
         <ul>
           <li><a href="#">Arcoaire</a></li>
           <li><a href="#">American Standard</a></li>
         </ul>
       </li>
       <li><a href="#" class="MenuBarItemSubmenu">Commercial Ice Machine</a>
         <ul>
           <li><a href="#">Hoshizaki Ice Machines</a></li>
           <li><a href="#">Manitowoc Ice Machines</a></li>
           <li><a href="#">Scotsman Ice Machines</a></li>
         </ul>
       </li>
       <li><a href="#" class="MenuBarItemSubmenu">Air Conditioning</a>
         <ul>
           <li><a href="html/subzero/arcoaireaircondioning.html">Arcoaire</a></li>
           <li><a href="html/subzero/americanstandardairconditioning.html">American Standard</a></li>
           <li><a href="html/subzero/mitsubishiairconditioners.html">Mitsubishi</a></li>
         </ul>
     </li>
       <li><a href="#" class="MenuBarItemSubmenu">Boiler </a>
         <ul>
           <li><a href="#">Weil McLain Residential</a></li>
           <li><a href="#">Weil McLain Commercial</a></li>
         </ul>
   </li>
       <li><a href="#" class="MenuBarItemSubmenu">Furnace </a>
         <ul>
           <li><a href="#">Arcoaire</a></li>
           <li><a href="#">American Standard</a></li>
           <li><a href="#">Mitsubishi</a></li>
         </ul>
   </li>
       <li><a href="#" class="MenuBarItemSubmenu">Heat Pump </a>
         <ul>
           <li><a href="#">Arcoaire</a></li>
           <li><a href="#">American Standard</a></li>
           <li><a href="#">Mitsubishi</a></li>
         </ul>
   </li>
       <li><a href="#" class="MenuBarItemSubmenu">Indoor Air Quality</a>
         <ul>
           <li><a href="#">Aprilaire Humidifiers</a></li>
           <li><a href="#">Honeywell Electronic Air Cleaners</a></li>
           <li><a href="#">Honeywell Thermostats</a></li>
         </ul>
   </li>
     </ul>
</li>
   <li><a class="MenuBarItemSubmenu" href="#">Job Photos</a>
     <ul>
<li><a href="#">Commercial Refrigeration</a></li>
<li><a href="#">Commercial Rooftop</a></li>
<li><a href="#">Commercial Ice Machine</a></li>
<li><a href="#">Air Conditioning</a></li>
<li><a href="#">Boiler</a></li>
<li><a href="#">Furnace</a></li>
<li><a href="#">Heat Pump</a></li>
<li><a href="#">Indoor Air Quality</a></li>
     </ul>
   </li>
   <li><a class="MenuBarItemSubmenu" href="#">Cool Savings</a>
     <ul>
       <li><a href="#">Monthly Specials</a></li>
       <li><a href="#">Manufacturers Rebates</a></li>
       <li><a href="#">Utility Rebates</a></li>
       <li><a href="#">Website Coupons</a></li>
<li><a href="#">Customer Referral Program</a></li>
     </ul>
   </li>
   <li><a class="MenuBarItemSubmenu" href="#">Social</a>
     <ul>
       <li><a href="#">"LIKE" Us on Facebook</a></li>
       <li><a href="#">"FOLLOW" Us on Twitter</a></li>
<li><a href="#">Facebook Disclaimer</a></li>
     </ul>
</li>
<li><a class="MenuBarItem" href="#">Contact Us</a> </li>
</ul>
<p><br />
</p>
<div class="sidebar1"><img src="Images/home.jpg" alt="Home Page Photo" width="105" height="240" /></div></div>
<div class="content">
    <h1>Instructions</h1>
    <p>Be aware that the CSS for these layouts is heavily commented. If you do most of your work in Design view, have a peek at the code to get tips on working with the CSS for the fixed layouts. You can remove these comments before you launch your site. To learn more about the techniques used in these CSS Layouts, read this article at Adobe's Developer Center - <a href="http://www.adobe.com/go/adc_css_layouts">http://www.adobe.com/go/adc_css_layouts</a>.</p>
    <h1>Clearing Method</h1>
    <p>Because all the columns are floated, this layout uses a clear:both declaration in the .footer rule. This clearing technique forces the .container to understand where the columns end in order to show any borders or background colors you place on the .container. If your design requires you to remove the .footer from the .container, you'll need to use a different clearing method. The most reliable will be to add a <br class="clearfloat" /> or <div class="clearfloat"></div> after your final floated column (but before the .container closes). This will have the same clearing effect.</p>
    <h3>Logo Replacement</h3>
    <p>An image placeholder was used in this layout in the .header where you'll likely want to place a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. </p>
    <p> Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. </p>
    <p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
    <h4>Backgrounds</h4>
    <p>By nature, the background color on any div will only show for the length of the content. This means if you're using a background color or border to create the look of a side column, it won't extend all the way to the footer but will stop when the content ends. If the .content div will always contain more content, you can place a border on the .content div to divide it from the column.</p>
    </div>
<div class="footer">
    <table width="960" border="0" cellspacing="0" cellpadding="0">
      <tr>
        <th width="102" scope="col"> </th>
        <th width="101" scope="col"> </th>
        <th width="106" scope="col"> </th>
        <th width="120" scope="col"> </th>
        <th width="172" scope="col"> </th>
        <th width="120" scope="col"> </th>
        <th width="103" scope="col"> </th>
        <th width="136" scope="col"> </th>
      </tr>
      <tr>
        <td colspan="2"><img src="Images/van.jpg" alt="Sub Zero Refrigeration Heating and Air Conditioning Service Van" width="243" height="109" align="left" /></td>
        <td colspan="6"><img src="Images/footer_right.jpg" width="717" height="109" alt="Footer" /></td>
      </tr>
    </table>
</div>
<div class="footer2">
    <div class="footer">
    <table width="960" height="62" border="1" align="center" cellspacing="8">
      <tr valign="middle">
        <th width="234" scope="col">Schedule a Service Call</th>
        <th width="247" scope="col"><p>Schedule Free New Equipment Replacement Estimate</p></th>
        <th width="99" scope="col"><a href="https://www.acca.org/consumer/find-a-contractor" target="_blank"><img src="Images/acca.gif" width="85" height="48" alt="ACCA Sub Zero Refrigeration" /></a></th>
        <th width="94" scope="col"><a href="http://www.bbb.org/chicago/business-reviews/heating-and-air-conditioning/sub-zero-refriger ation-and-a-c-in-midlothian-il-7695" target="_blank"><img src="Images/BBB.png" width="87" height="48" alt="Sub Zero Refrigeration BBB A+ Rating" /></a></th>
        <th width="84" scope="col"><a href="http://www.natex.org/" target="_blank"><img src="Images/nate.png" width="76" height="74" alt="NATE Sub Zero Refrigeration" /></a></th>
        <th width="83" scope="col"><a href="http://www.twitter.com/subzerorefrig" target="_new"><img src="Images/twitter_logo.jpg" width="69" height="69" alt="Follow us on Twitter" /></a></th>
        <th width="143" scope="col"><a href="https://www.facebook.com/subzerorefrig" target="_new"><img src="Images/facebook.png" width="81" height="81" alt="" /></a></th>
      </tr>
    </table>
    </div>
    <div class="footer3" id="footer3">
      <div class="footer">
        <table width="960" border="0" align="center" cellpadding="0" cellspacing="0">
          <tr>
            <th width="960" style="background-color: #B7E3EA; font-size: 10px; font-family: Arial, Helvetica, sans-serif" scope="col">Home | About Us | Repair | Sales | Maintenance | Products | Our Job Photos | Cool Savings | Social | Contact Us | Schedule Free New Equipment Estimate | Schedule Service | Site Map<br />
            Search Sub Zero Refrigeration Heating and Air Conditioning<br />            </th>
          </tr>
        </table>
        <p>      Copyright 1999-2013 | Last updated on
          February 19, 2012 | Web designer's - Ted Wagner and Cherie White Cachampis      </p>
      </div>
    </div>
</div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
swfobject.registerObject("FlashID");
</script>
</body>
</html>

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

ProviderException No service defined in the WSDL

I use WebLogic 10.3.4 with JDeveloper 11g Release 1 and the current Oracle SOA Suite 11g.
I can deploy a simple composite with a BPEL service. However, If I use my complex BPEL composite, I always get the following stack trace on deployment (it validates perfectly within the editor):
<02.02.2011 10:38 Uhr MEZ> <Error> <oracle.integration.platform.blocks.deploy.se
rvlet> <SOA-21537> <Fehlermeldung wird zur³ckgesendet: Fehler beim Deployment vo
n Composite auf AdminServer: Deployment Failed: Service kann nicht registriert w
erden...>
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation Expected SOA Keystore loca
tion: C:/dev/server/Ora11g/USER_P~1/domains/BASE_D~1/config/fmwconfig/default-ke
ystore.jks
INFO: SSLSocketFactoryManagerImpl.getSSLSocketFactory Cannot locate the default
or configured keystore at C:/dev/server/Ora11g/USER_P~1/domains/BASE_D~1/config/
fmwconfig/default-keystore.jks. However, the keystore and related parameters are
used for composite-related SSL communications and not required if SSL communica
tion is not used.
<02.02.2011 10:39 Uhr MEZ> <Error> <oracle.integration.platform> <SOA-20003> <Se
rvice kann nicht registriert werden.
oracle.webservices.provider.ProviderException: oracle.webservices.provider.Provi
derException: No service {http://lspi.wiai.uniba.de/prototype/wsdl/collaboration
/SimpleUseCase/role-1/transaction/bta-1-bt-example/master/client/1-0}ToMonitorin
g defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(Provider
ConfigImpl.java:455)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(Provider
ConfigImpl.java:285)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addServi
ce(FabricProviderConfig.java:115)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addServi
ce(FabricProviderConfig.java:204)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.load(WebServiceEntryBindingComponent.java:171)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.load(WebServiceEntryBindingComponent.java:98)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnecti
on.deployServices(CompositeDeploymentConnection.java:160)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnecti
on.deploy(CompositeDeploymentConnection.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerI
mpl.initDeployment(CompositeDeploymentManagerImpl.java:149)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerI
mpl.load(CompositeDeploymentManagerImpl.java:62)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflecti
on(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJo
inpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(
ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.in
voke(DeploymentEventPublisher.java:69)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(
ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynami
cAopProxy.java:204)
at $Proxy307.load(Unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeployme
ntCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoo
rdinatorImpl.java:33)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor
.deployNewComposite(BaseDeployProcessor.java:367)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor
.deploySARs(BaseDeployProcessor.java:219)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eployWork(DeployProcessor.java:160)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eployWork(DeployProcessor.java:109)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eploy(DeployProcessor.java:96)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.pro
cess(DeployProcessor.java:78)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerSe
rvlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:191)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerSe
rvlet.doPost(CompositeDeployerServlet.java:114)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.jav
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:1
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.jav
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:1
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:13
6)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.webservices.provider.ProviderException: No service {http://lsp
i.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bt
a-1-bt-example/master/client/1-0}ToMonitoring defined in the WSDL
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.getServiceName(Prov
iderConfigImpl.java:624)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(Provider
ConfigImpl.java:346)
at oracle.j2ee.ws.server.provider.ProviderConfigImpl.addService(Provider
ConfigImpl.java:285)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addServi
ce(FabricProviderConfig.java:115)
at oracle.integration.platform.blocks.soap.FabricProviderConfig.addServi
ce(FabricProviderConfig.java:204)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.load(WebServiceEntryBindingComponent.java:171)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.load(WebServiceEntryBindingComponent.java:98)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnecti
on.deployServices(CompositeDeploymentConnection.java:160)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnecti
on.deploy(CompositeDeploymentConnection.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerI
mpl.initDeployment(CompositeDeploymentManagerImpl.java:149)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerI
mpl.load(CompositeDeploymentManagerImpl.java:62)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflecti
on(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJo
inpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(
ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.in
voke(DeploymentEventPublisher.java:69)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(
ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynami
cAopProxy.java:204)
at $Proxy307.load(Unknown Source)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeployme
ntCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoo
rdinatorImpl.java:33)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor
.deployNewComposite(BaseDeployProcessor.java:367)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor
.deploySARs(BaseDeployProcessor.java:219)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eployWork(DeployProcessor.java:160)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eployWork(DeployProcessor.java:109)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eploy(DeployProcessor.java:96)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.pro
cess(DeployProcessor.java:78)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerSe
rvlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:191)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerSe
rvlet.doPost(CompositeDeployerServlet.java:114)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.jav
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:1
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.jav
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:1
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:13
6)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.ja
va:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppS
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletC
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.j
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
<02.02.2011 10:39 Uhr MEZ> <Error> <ServletContext-/soa-infra> <BEA-000000> <Err
or during deployment
oracle.fabric.common.FabricException: Deployment Failed: Service kann nicht regi
striert werden.
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeployme
ntCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoo
rdinatorImpl.java:38)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor
.deployNewComposite(BaseDeployProcessor.java:367)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor
.deploySARs(BaseDeployProcessor.java:219)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eployWork(DeployProcessor.java:160)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doD
eployWork(DeployProcessor.java:109)
Truncated. see log file for complete stacktrace
Caused By: oracle.fabric.common.FabricDeploymentException: Service kann nicht re
gistriert werden. {rootCauses=[]}
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.load(WebServiceEntryBindingComponent.java:227)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingCompone
nt.load(WebServiceEntryBindingComponent.java:98)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnecti
on.deployServices(CompositeDeploymentConnection.java:160)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnecti
on.deploy(CompositeDeploymentConnection.java:91)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerI
mpl.initDeployment(CompositeDeploymentManagerImpl.java:149)
Truncated. see log file for complete stacktrace
>
<02.02.2011 10:39 Uhr MEZ> <Error> <oracle.integration.platform.blocks.deploy.se
rvlet> <SOA-21537> <Fehlermeldung wird zur³ckgesendet: Fehler beim Deployment vo
n Composite auf AdminServer: Deployment Failed: Service kann nicht registriert w
erden...>
h1. Essentials parts of the Component.xml
<reference name="SimpleUseCaserole1bta1btexampleMonitoring" ui:wsdlLocation="wsdl/SimpleUseCaserole1bta1btexampleMonitoring.wsdl">
<interface.wsdl interface="http://lspi.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bta-1-bt-example/monitoring/1-0#wsdl.interface(SimpleUseCaserole1bta1btexampleMonitoringPortType)" />
<binding.ws port="http://lspi.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bta-1-bt-example/monitoring/1-0#wsdl.endpoint(SimpleUseCaserole1bta1btexampleMonitoringService/SimpleUseCaserole1bta1btexampleMonitoringPort)" soapVersion="1.1"/>
</reference>
h1. Essential parts of the componentType
          <reference name="ToMonitoring" ui:wsdlLocation="wsdl/SimpleUseCaserole1bta1btexampleMonitoring.wsdl">
               <interface.wsdl interface="http://lspi.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bta-1-bt-example/monitoring/1-0#wsdl.interface(SimpleUseCaserole1bta1btexampleMonitoringPortType)"/>
          </reference>
h1. the WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     name="SimpleUseCaserole1bta1btexampleMonitoringService"
     xmlns:tns="http://lspi.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bta-1-bt-example/monitoring/1-0"
     targetNamespace="http://lspi.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bta-1-bt-example/monitoring/1-0"
     xmlns:event="http://lspi.wiai.uniba.de/prototype/xsd/event/1-0"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
     xmlns:vprop="http://docs.oasis-open.org/wsbpel/2.0/varprop"
     xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema"
     xmlns:header="http://lspi.wiai.uniba.de/prototype/xsd/header/1-0"
     >
<types>
<xsd:schema targetNamespace="http://lspi.wiai.uniba.de/prototype/wsdl/collaboration/SimpleUseCase/role-1/transaction/bta-1-bt-example/monitoring/1-0">
               <xsd:import namespace="http://lspi.wiai.uniba.de/prototype/xsd/event/1-0" schemaLocation="xsd/Event.xsd"/>
</xsd:schema>
</types>
<message name="EventMessage">
<part name="EventPart" element="event:Event"/>
</message>
<portType name="SimpleUseCaserole1bta1btexampleMonitoringPortType">
<operation name="EventOperation">
<input name="input1" message="tns:EventMessage"/>
</operation>
</portType>
<binding name="SimpleUseCaserole1bta1btexampleMonitoringBinding" type="tns:SimpleUseCaserole1bta1btexampleMonitoringPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="EventOperation">
<soap:operation/>
<input name="input1">
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="SimpleUseCaserole1bta1btexampleMonitoringService">
<port name="SimpleUseCaserole1bta1btexampleMonitoringPort" binding="tns:SimpleUseCaserole1bta1btexampleMonitoringBinding">
<soap:address location="http://localhost:8091/ode/processes/SimpleUseCaserole1bta1btexampleMonitoringService"/>
</port>
</service>
     <plnk:partnerLinkType name="SimpleUseCaserole1bta1btexampleMonitoring">
     <plnk:role name="SimpleUseCaserole1bta1btexampleMonitoringPortTypeRole" portType="tns:SimpleUseCaserole1bta1btexampleMonitoringPortType"/>
     </plnk:partnerLinkType>
</definitions>
Edited by: user2595377 on 02.02.2011 01:46

there is a text table defined for FAGL_SEGM. Start SE11, display the table and menu: GoTo => text table

The tax code entered is not defined in the company code country.

Dear sap guru's
I am facing a problem while doing invoice or while cancelling the invoice or even during Subsequent Credit/Debit
Tax code V0 in procedure is invalid
   Message no. FF704
Diagnosis
   The tax code entered is not defined in the company code country.
System Response
Procedure
   Check and, if necessary, correct the entry.
Procedure for System Administration
   If it is not an input error, check and possibly change the system
   settings.
   To do this, choose Maintain entries (F5).
   1. Check whether the required tax procedure has been allocated to the
       company code country. The Procedure field is on the detailed screen.
   2. If you need a new tax code, you can create one yourself.
For this i have checked the assignment of company code and tax code V0 in Tcode (OBCL)
In FTXP the tax code is created in country IN, for the same tax procedure and the tax is a input tax.
please suggest what could be the exact problem
Regards
Sujit

Hi Sujit,
1.Go to FTXP and create tax code V0 for country IN and procedure ZAXINN.
2.In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
3.Also things to be checked
1> assign country to company code
2> assign company code to tax code
3> create tax code for country IN
4.Under the following menu path, pls check if you have assigned your tax code to Company Code
IMG>Logistics (General)>Tax on Goods Movement>India>Basic Settings>Determination of Excise Duty>Condition Based Excise Determination>Assign Tax Codes to Company Code
Hope it clears,
Rahul.

Adding a new server in the menu of SAP GUI 640

Hello Everybody,
While adding a new server to the menu of SAP GUI 640 using Server Tab after entering all details like :
1] SAP System ID
2] Hostname where message server is running
3] SAP ROUTER :None
After filling all the above details and after pressing the Generate List Button I am getting the following error .Please help me to know why this error is coming and suggest a solutio for adding a new server to my SAP GUI 640.But I am able to add a new server using User defined tab but I want to add a new server using Server tab.
Below is error details which I am getting:
Error:service'sapmsSBX'unknown
Wed Jan 09 06:41:13 2008
Release 640
Component NI(network interface),version 37
rc=-3,module ninti.c,line 463
Detail NiPGetServByName: service 'sapmsSBX' not found.
Thanks and Regards,
Ashish Thakkar.

Hi,
check etc/services for sapmsSBX entry. If missing - add it (i.e. sapmsSBX 36XX/tcp - where XX is your instance no.)
Add an extra [Enter] after last line of etc/services.
Regs,
FS

I have dual displays. My dock is on the MBP bottom and the menu bar is on the extended monitors top.

I have a Dell 2408 acting as the main display and a 15" MBP. For some reason, today the dock ended up on the MBP screen at the bottom and the menu bar is on the Dell at the top. I can't seem to move the dock back to the Dell. Can someone help? I tried moving the menu bar to the MBP and then back, hoping the dock would follow but no luck.
Thanks for your help.

When the dock is defined as on the bottom, it will appear on the screen of the extended desktop that is lowest.
Move the second monitor where the bottom edges are equal or the Dell is lower and the dock will move there.
Regards,
Captfred

How to add user defined functions in Menu bar of a Selection Screen?

Hi,
Can anybody please suggest me that how can I add user defined functions in the menu bar of a Selection Screen?
Regards
s@k

Dear Amit,
I am referring to the standard SAP program: RIEQUI20.
On the initial screen, there are 3 tabs.
Code:
SELECTION-SCREEN BEGIN OF TABBED BLOCK tab FOR 25 LINES.
SELECTION-SCREEN TAB (20) tab1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (20) tab2 USER-COMMAND ucomm2
                     DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (20) tab3 USER-COMMAND ucomm2
                     DEFAULT SCREEN 003.
SELECTION-SCREEN END OF BLOCK tab.
AT SELECTION-SCREEN.
CLEAR gv_okcode.
gv_okcode = sy-ucomm.
CLEAR sy-ucomm.
CASE gv_okcode.
    WHEN 'IH08'.
      CALL TRANSACTION 'IH08'. "Equipment Selection
    WHEN 'IW29'.
      CALL TRANSACTION 'IW29'. "Notification Selection
    WHEN 'IW39'.
      CALL TRANSACTION 'IW39'. "Order List Selection
    WHEN OTHERS.
ENDCASE.
*   Check date:
IF NOT datuv IS INITIAL
AND NOT datub IS INITIAL.
    IF datub >= datuv.
    ELSE.
      MESSAGE e884(ih) WITH datuv datub.
    ENDIF.
ENDIF.
IF variant IS INITIAL AND
     dy_vari IS INITIAL.
    PERFORM get_default_variant_f14 USING variant.
ENDIF.
PERFORM variant_existence_f14 USING variant.
IF datuv IS INITIAL.
    datuv = sy-datum.
ENDIF.
IF datub IS INITIAL.
    datub = sy-datum.
ENDIF.
IF sy-ucomm = 'ADDR'.
    PERFORM adress_sel_f01 USING 'EQUIR'.
ENDIF.
PERFORM check_parnr_f76.
* AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
STATICS: l_slset TYPE sy-slset.
*--- Set initial variant
PERFORM variant_init_f14 USING 'INST' 'INST' 'INST' 'RIEQUI20'.
IF variant IS INITIAL AND
     dy_vari IS INITIAL AND
    gv_variant_flag IS INITIAL.
    PERFORM get_default_variant_f14 USING variant.
    gv_variant_flag = 'X'.
ENDIF.
*--- Set Icon for adress-button
PERFORM set_icon_f01 USING dy_adrfl ad_icon text-ad0 text-ad1.
*--- get classification data from select option
*--- (if new variant or if called via submit or F3)
IF ( l_slset NE sy-slset ) OR
     ( s_comw[] IS NOT INITIAL AND gt_clsd_comw[] IS INITIAL ).
    l_slset = sy-slset.
    gv_class_old = dy_class.
    gv_klart_old = dy_klart.
    PERFORM copy_selopt_comw_f79 TABLES gt_clsd_comw s_comw.
    PERFORM class_search_init_f77 USING 'EQUI'.
ENDIF.
*--- set Icon for classification
LOOP AT gt_clsd_comw TRANSPORTING NO FIELDS
                      WHERE atcod > '0'.
    EXIT.
ENDLOOP.
IF sy-subrc IS INITIAL.
    gv_comw_flag = 'X'.
ELSE.
    CLEAR gv_comw_flag.
ENDIF.
PERFORM set_icon_f01 USING gv_comw_flag cl_icon text-cl0 text-cl1.
CALL METHOD cl_uid_cust=>selection_screen_output.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR variant.
PERFORM variant_inputhelp_f14 USING variant 'RIEQUI20'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR dy_parnr.
PERFORM f4_for_parnr_f76.
AT SELECTION-SCREEN ON BLOCK clse.
IF dy_class NE gv_class_old
    OR dy_klart NE gv_klart_old.
    gv_class_old = dy_class.
    gv_klart_old = dy_klart.
    CLEAR gv_comw_flag.
    REFRESH gt_clsd_comw.
    REFRESH s_comw.
ENDIF.
PERFORM class_exist_f77 USING dy_klart dy_class 'DY_CLASS'.
IF sy-ucomm = 'COMW'.
    CALL FUNCTION 'IHCLSD_VALUATION_POPUP'
      EXPORTING
        i_klart               = dy_klart
        i_class               = dy_class
        i_language            = sy-langu
        i_key_date            = sy-datum
        i_also_subclasses     = dy_subcl
      TABLES
        ct_comw               = gt_clsd_comw
      EXCEPTIONS
        exc_no_class          = 1
        exc_klart_not_allowed = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
*--- fill classification data in select option
    PERFORM copy_comw_selopt_f79 TABLES gt_clsd_comw s_comw.
ENDIF.
IF sy-ucomm = 'ONLI'.
    sscrfields-ucomm = sy-ucomm.
ENDIF.
Regards
s@k
Edited by: siemens.a.k on Jan 15, 2010 10:10 AM

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

Opening a page in a browser when a choice is selected from the Menu

The choice item is defined in MXML as
<menuitem label="Help">
                <menuitem label="Documentation" data="documentation.swf" />
            </menuitem>
Code on what to do when it is selected is
<mx:ApplicationControlBar id="appBar" x="0" y="0" dock="false" visible="false" width="100%">
        <mx:MenuBar id="appNavigation" dataProvider="{appNavigation_dp}" labelField="@label" iconField="@icon" itemClick="menuBarButtons(event);" />
    </mx:ApplicationControlBar>
Function called menuBarButtons is
private function menuBarButtons(event:MenuEvent):void{
                var pageName:String = event.item.@data;
                switch(pageName){
case 'Documentation':
                    var url:URLRequest = new URLRequest('http://www.mydocumentation.com');
                        navigateToURL(url,'_blank');
                    break;
I have done the required imports such as
import flash.net.navigateToURL;
            import flash.net.URLRequest;
            import flash.net.URLVariables;
When I click on the Documentation option from the menu, no new URL opens
while I am expecting a page with a URL http://www.mydocumentation.com to be
opened
What am I missing?
Any suggestions would be appreciated.

try
var pageName:String = event.item.@label;
instead of
var pageName:String = event.item.@data;

Mouseover effects not uniform across the menu

I created a simple menu in Dreamweaver CS4 using css. The two menu tabs with drop-down effects have a glitch in the top tier. The Black text on white background turns white on mouseover causing the button to go blank.
Where would I go in the SpryMenuBarHorizontal.css file to fix this?
Thanks

See Customizing Spry Menus ~
http://foundationphp.com/tutorials/sprymenu/customize1.php
This is where the menu colors are defined.
ul.MenuBarHorizontal a {color: #000; background: #FFF}
This is where the mouseover colors are defined:
ul.MenuBarHorizontal a:hover,
ul.MenuBarHorizontal a:focus {
background-color: #33C;
color: #FFF;}
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Ive just purchased lightroom 5. In LRM 4, under Photo, edit in, I have been using NIK software color efex, silver efex, DFine, viveza, etc. When I go to the menu for "edit in", I only see an option for silver efex, not the rest of the NIK software package

How do I access all my NIK software (color fee, silver efex, define, viveza) in LRM 5 under "edit in". The options appear in LRM 4,But sinceIjust began w LRM 5, I don't see the NIK software options in the menu: Photo, edit in...? Thanks

You will need to reinstall your Nik Plugins.

The JPanel did not show when the menu is selected

My program consists a JMenu bar with sub menu items. When the user select on the menu items a panel with the gridbag layout will show with all the labels.but the panel did not show. Can anyone show the problem for me ?
AdminFrameMain.java
public class AdminFrameMain
     private DisplayMenuBar menubar;
     private DisplayToolBar toolbar;
     private DisplayStatusBar statusbar;
     public AdminFrameMain()
          JFrame frame = new JFrame("S-League Administration Management System");
          Toolkit kit = frame.getToolkit();
          Dimension windowsize =kit.getScreenSize();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container content = frame.getContentPane();
          content.setLayout(new BorderLayout());
          menubar = new DisplayMenuBar(frame,content);
          toolbar = new DisplayToolBar(content);
          statusbar = new DisplayStatusBar(content);
          frame.setSize(800,600);
          frame.setVisible(true);
     public static void main(String [] args){
          AdminFrameMain tm = new AdminFrameMain();
DisplayMenuBar.java
public class DisplayMenuBar
     private JMenu addMenu,addTeamMenu;
     private JMenuBar bar = new JMenuBar();
     private JToolBar toolbar = new JToolBar();
     private JMenuItem addTeamItem;
     private JFrame setFrame;
     private Container setContent;
     private AddTeamManagement addTeamMang;
     public DisplayMenuBar(JFrame frame,Container c)
          setFrame = frame;
          setContent = c;
          SetMenuBar();
     public void SetMenuBar()
     setFrame.setJMenuBar(bar);
     addMenu = new JMenu("Add");
     //file menu items list
     //Add sub menu
     addTeamMenu = new JMenu("Team Management");
     addMenu.add(addTeamMenu);
     //Add sub menu items
     addTeamMenu.add(addTeamItem = new JMenuItem("Add Team"));
     addTeamMenu.setMnemonic('T');
     addTeamItem.setMnemonic('T');
     //team items listener
     //addTeamItem.addActionListener(taskcommand);
     addTeamItem.addActionListener(new ActionListener()
          public void actionPerformed(ActionEvent e)
               AddTeamManagement addTeamMang = new AddTeamManagement(setFrame,setContent);
     bar.add(addMenu);
AddTeamManagement.java
public class AddTeamManagement
     private JPanel addTeamPanel;
     private JFrame frame;
     private JButton createTeamBt,resetTeamBt;
     private Container addTeamContent;
     private JTextArea teamDescTextArea,teamIndpTextArea;
     private JTextField teamNameField;
     private JLabel teamID,teamDesc,teamInfo,numOfPlayers,teamZone,playersNum;
     private GridBagLayout gridBag;
     private GridBagConstraints constraints;
     public AddTeamManagement(JFrame f,Container c)
          System.out.println("add team mg");
          addTeamPanel = new JPanel();
          frame = f;
          addTeamContent = c;
          gridBag = new GridBagLayout();
          addTeamPanel.setLayout(gridBag);
          addTeamPanel.setBackground(Color.pink);
          constraints = new GridBagConstraints();
          teamID = new JLabel("Team ID:");
          teamDesc = new JLabel("Team Description:");
          teamInfo = new JLabel("Team Info:");
          numOfPlayers = new JLabel("No Of Players:");
          playersNum = new JLabel("15 Maximun");
          teamZone = new JLabel("Team Zone:");
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamID,0,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamDesc,1,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamInfo,2,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(numOfPlayers,3,0,1,1);
          constraints.fill = constraints.VERTICAL;
          constraints.weightx = 1;
          constraints.weighty = 0;
          addComponent(teamZone,4,0,1,1);
          System.out.println("showing");
          addTeamContent.add(addTeamPanel,BorderLayout.CENTER);
     public void addComponent(Component component,int row,int column,int width,int height)
          System.out.println("adding c");
          constraints.gridx = column;
          constraints.gridy = row;
          constraints.gridwidth = width;
          constraints.gridheight = height;
          gridBag.setConstraints(component,constraints);
          addTeamPanel.add(component);
          addTeamPanel.setVisible(true);
}

Hello,
you are missing only one link, just add following line to your actionPerformed method of DisplayMenuBar class and all problem will be solved
setContent.validate();
Actually, Swing component does not updated automatically. when you do any changes to the component layout it will set that component as invalidated component. To update the view you need to call validate() method defined in JComponent class.
Virus

My Creative Cloud icon is gone from the menu bar and the CC app will not open.

My Creative Cloud icon is gone from the menu bar and the CC app will not open. I'm on OS 10.10.3. I've tried reinstalling and also various fixes suggested on this forum but to no avail. Incredibly frustrating to be paying monthly for a product that doesn't work.

Click on below link :
OS X Mavericks: Enable and disable the root user
(Applies for Yosemite as well)
How to log in as root
Use these steps in Snow Leopard and later to log in as the root user.
If you are logged in, choose Log Out from the Apple menu.
If you are logging in from a list of usernames with pictures, click Other.
In the Name field, type: root
In the Password field, type the password you defined when setting up the root user account.
Let me know if you face any issue

To define a the menu-followup

Similar Messages

Maybe you are looking for