To detect the service name of the DB

Hi,
Is there a way by which we can detect the corr. service name of the DB, given the IP of that?
Thks & Rgds,
HuaMin

Just my 0.02€ :
syntax : tnsping <address> <count>
->
will check for an <address> paragraph in tnsnames.ora, and "ping" that name using hostname/port of the paragraph from tnsnames.ora. If it finds no <address> match in tnsnames.ora, it will fail.
You won't be able to use tnsping to figure out the service_name.
Maybe in stead try LSNRCTL SERVICE , and/or figure out from init.ora config file.

Similar Messages

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

How to get the service name of a webservice using UDDI API

Hi,
Iam working on setting up a dynamic partner link in a BPEL, by passing the endpoint of a web service queried from the UDDI (Oracle Service Registry 10.3 ) using the API. Iam able to do it successfully.
Now, for example I have two operations in my wsdl, one to createCustomer and the other to bookTicket. I need to get the operation name using UDDI API so that i can pass it along with the endpoint to the partner link. ie. When i need to createCustomer, my UDDI API code will need to get the service name createCustomer and the endpoint and I would pass them to the partnerlink and the createCustomer operation of my webservice would be called.
Can any one help me to get the service names of the wsdl using UDDI APIs.
Thanks,
Ananth

Hi sia,
1. Table is APQI
2. field name for session name is GROUPID
regards,
amit m.

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

How to know the service name of oracle server

write a query to get the servcie name of oracle from oracle tables

Not really! That's the instance name and not the service name!
This version is correct:
select name, value from v$parameter where name = 'service_names';
NAME VALUE
service_names ACPT.WORLD
1 row selectedBye, Aron

Getting host, port from the tnsnames.ora with the service name

Hi.
I think that I asked a similar question yesterday. I want to ask if there is a way to get host and port from the tnsnames.org with a given service name. Somebody answered it for getting SID in the sqlplus. so I tried it in a similar way, but it didn't work.
I have a service name, but I don't know how to get host and port. I know that I can parse the tnsnames.ora file to get it, but if possible, I want to use the more official and safe way.
I'd appreciated if somebody knows it.

caesarkim wrote:
Hi.
I think that I asked a similar question yesterday. I want to ask if there is a way to get host and port from the tnsnames.org with a given service name. Somebody answered it for getting SID in the sqlplus. so I tried it in a similar way, but it didn't work.
I have a service name, but I don't know how to get host and port. I know that I can parse the tnsnames.ora file to get it, but if possible, I want to use the more official and safe way.
I'd appreciated if somebody knows it.Oracle RDBMS does not require SQL*Net to operate.
Oracle RDBMS does NOT now or care about content of any tnsnames.ora file.
Realize that each (remote) user can have their own personalized copy of tnsnames.ora
The content of tnsnames not NOT have to reflect any reality.
I could post the content of my tnsnames.ora & it would be useless to everyone reading.

How to detect the number of marker (cuepoitName) with same name from a list.

... it is the second step of my previous question.
From a sound I take a list of cuepointName with different name, for exemple:
Mylistcuepoint = ["reg 01", "reg 2", "name 1, "name 2", "name 3"] etc.
Which command I must use to detect the cuePointTime only for the cuepointName: "name 1", "name 2" "name 3" ...
My second question, for a second script is: how can I count how many cuePointName with "name 1", "name 2", "name ...." I have in "Mylistcuepoint"?
I can load several sound member so "Mylistcuepoint" can change obviously for the number of marker of "reg ...." and for the number of marker of "name ...." but the first word ("reg" or "name") it will be always the same.
Tanks

From a sound I take a list of cuepointName with different name, for exemple:
Mylistcuepoint = ["reg 01", "reg 2", "name 1, "name 2", "name 3"] etc.
Which command I must use to detect the cuePointTime only for the cuepointName: "name 1", "name 2" "name 3" ...
I already showed you how to do this in response to your last question.
My second question, for a second script is: how can I count how many cuePointName with "name 1", "name 2", "name ...." I have in "Mylistcuepoint"?
It is a list like any other. Iterate through the items looking to see if they match your criterion/criteria and increment your found count (or add indices to a list) as you go:
tSearch = "name 1"
tFoundCount = 0
Mylistcuepoint = ["reg 01", "reg 2", "name 1, "name 2", "name 3"]
if Mylistcuepoint.getPos(tSearch) then
repeat with nn = 1 to count(Mylistcuepoint)
if ( Mylistcuepoint[nn] = tSearch ) then tFoundCount = tFoundCount +1
end repeat
end if

How to connect the database (JDBC) using service name rather than SID

How should we make the connection to the database using service name. Initially, we are using the SID to make the database connection, with following setting in the data-source.xml in OC4J using ABCDB as the SID.
<data-sources>
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="jdbc/ABCDB"
          location="jdbc/ABCDB"
          pooled-location="jdbc/OracleDSPooled"
          xa-location="jdbc/xa/OracleDSXA"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="ABC"
          password="ABC"
          url="jdbc:oracle:thin:@191.1.4.126:1521:ABCDB"
     />
</data-sources>
It work, but now we need to make the connection using this service name ABCSERVICE, but it doesn't work in the OC4J (JDBC). May I know how should we handle this connection?
Thanks and Regards,
Pang

Finally, I got the solution to make the database connection using service name, with putting the tnsname setting in URL portion.
url="jdbc:oracle:thin:@(description=(address=(host=191.1.4.126)(protocol=tcp)(port=1521))(connect_data=(SERVICE_NAME = ABCSERVICE)))"
And now, it is working fine.
Regards,
Pang

How to use the default database service name on creating procedure for data

how to use the default database service name on creating procedure for datagaurd client failover ??? all oracle doc says create a new service as below and enable at DB startup. but our client is using/wanted database default service to connect from application on the datagaurd environment (rac to non rac setup).please help.
Db name is = prod.
exec DBMS_SERVICE.CREATE_SERVICE (service_name => 'prod',network_name =>'prod',failover_method => 'BASIC',failover_type => 'SELECT',failover_retries => 180,failover_delay => 1);
says already the service available.
CREATE OR REPLACE TRIGGER manage_dgservice after startup on database DECLARE role
VARCHAR(30);BEGIN SELECT DATABASE_ROLE INTO role FROM V$DATABASE;
IF role = 'NO' THEN DBMS_SERVICE.START_SERVICE('prod');
END IF;
END;
says trigger created, but during a swithover still the service is listeneing on listener.
tns entry.
prod =
(DESCRIPTION =
(ADDRESS_LIST =
(LOAD_BALANCE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = prod1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod2)(PORT = 1521)) ---> primary db entry
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = proddr)(PORT = 1521)) --> DR DB entry
(CONNECT_DATA =
(SERVICE_NAME = prod)
thanks in advance.
Edited by: 854393 on Dec 29, 2012 11:52 AM

Hello;
So in the example below replace "ernie" with the alias you want the client to use.
I can show you how I do it :
First an entry need to be added to the client tnsnames.ora that uses a SERVICE_NAME instead of a SID.
ernie =
(DESCRIPTION =
    (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = Primary.host)(PORT = 1521))
       (ADDRESS = (PROTOCOL = TCP)(HOST = Standby.host)(PORT = 1521))
       (CONNECT_DATA =
       (SERVICE_NAME = ernie)
)Next the service 'ernie' needs to be created manually on the primary database.
BEGIN
   DBMS_SERVICE.CREATE_SERVICE('ernie','ernie');
END;
/After creating the service needs to be manually started.
BEGIN
   DBMS_SERVICE.START_SERVICE('ernie');
END;
/Several of the default parameters can now be set for 'ernie'.
BEGIN
   DBMS_SERVICE.MODIFY_SERVICE
   ('ernie',
   FAILOVER_METHOD => 'BASIC',
   FAILOVER_TYPE => 'SELECT',
   FAILOVER_RETRIES => 200,
   FAILOVER_DELAY => 1);
END;
/Finally a database STARTUP trigger should be created to ensures that this service is only offered if the database is primary.
CREATE TRIGGER CHECK_ERNIE_START AFTER STARTUP ON DATABASE
DECLARE
V_ROLE VARCHAR(30);
BEGIN
SELECT DATABASE_ROLE INTO V_ROLE FROM V$DATABASE;
IF V_ROLE = 'PRIMARY' THEN
DBMS_SERVICE.START_SERVICE('ernie');
ELSE
DBMS_SERVICE.STOP_SERVICE('ernie');
END IF;
END;
/lsnrctl status - should show the new service.
When I do this the Database will still register with the listener. I don't give that to the clients. That one will still be available but nobody knows about it. Meanwhile "ernie" moves with the database role.
So in my example the default just hangs out in the background.
Best Regards
mseberg
Edited by: mseberg on Dec 29, 2012 3:51 PM

Given IP and port number, Is there a way to find the service name?

Hi,
In the Java language, if I am given the IP and the Port number, is there way to lookup the corresponding service name?
thanks, grace

There are a number of standard services by port number. You can get that from /etc/services on any nx system and put it into a map or array. That list doesn't change all that often.
In general though, as Dave says, no.
Assuming the service is not one of the standard ones and the same port may provide different services on different IP addresses, there would need to be some standard protocol for naming services that you could access at those IPs--either a "list of ports/services" service that's at a known port, or a request/response that would be standard across all IPs and ports. As far as I know, neither of those exist.

Webservices remove service name and port from the URL

Hi community,
so I have a server PC called "superlab"(*) and I also have a webservice called "superlab"(*). Now the users need to enter superlab:8001/superlab to the browser to access the service. I'd like them simply enter superlab.
So my questions:
1. how can I remove the service name from the URL
2. how can I remove the port number from the URL
3. (not related but I have difficulty to understand what it the point in "publishing" a webservice while simply starting it does the job as well)
thanks!
*Not the real name

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Get the service name using form 6i

Dear Oracle Gurus
Can anyone please tell me how can I get the connection service name using forms 6i.
Fawad

Let me explain in a bit detail.
Lets suppose, using TNSNAMES.ORA, I created a service by the name DBServer
similarly I have some other services in TNSNAMES.ORA and I may swith between these services
Now I connect my forms using scott/tiger@dbserver
I wish to get this service name i.e. 'dbserver' using the form 6i

The service name is invalid When starting the Database Control

Dear Oracle Expert,
I have installed Oracle database 11g on Windows Professional x64 Edition Version 2003 Service Pack 2..
When I try to start the Database control after renaming the IP_address to the local machine name which is robert. It prompts back with an error.
C:\>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.1.67:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.1.67:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The service name is i
nvalid.
More help is available by typing NET HELPMSG 2185.
C:\>hostname
robert
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>emctl start dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>SET ORACLE_HOME= C:\app\Administrator\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBC
onsole_robert_ocp11g
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>emctl start dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>
Thanks in advance.
Rlee

Hello Oracle experts,
I have to managed to Configure the Database Control by configuring a Microsoft Network adapter on my laptop but
right now I can't access it within the URL.
Tests of the running Database control include:
C:\Documents and Settings\Administrator>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Documents and Settings\Administrator>SET ORACLE_SID=ocp11
C:\Documents and Settings\Administrator>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://robert:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory C:\app\Administrator\product\11.1.0\db_2/robert_
ocp11/sysman/log
C:\Documents and Settings\Administrator>
When I try to access the database control, I am un able to.
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the robert:1158 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Is this something related to Internet Explorer.
Kindly rescue me out.
Regards,
RLee

TNS : could not resove the service name

Here is the line that I added to my PC tnsnames .ora file.
srprod1.PLUS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvprod1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = GAV.plusfuds.com)
Here is my What I get after I started the listerner.
The global_name is set to TRUE.
db_domain is also set to plusfunds.com
LSNRCTL for Solaris: Version 10.1.0.2.0 - Production on 30-AUG-2005 17:28:37
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.1.0.2.0 - Production
Start Date 30-AUG-2005 16:18:10
Uptime 0 days 1 hr. 10 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/GAV/101_64/network/admin/listener.ora
Listener Log File /oracle/GAV/101_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=srvprod1)(PORT=1521)))
Services Summary...
Service "GAV.plusfunds.com" has 1 instance(s).
Instance "GAV", status READY, has 1 handler(s) for this service...
Service "plusfunds.com" has 1 instance(s).
Instance "GAV", status UNKNOWN, has 3 handler(s) for this service...
The command completed successfully.
Error message :
TNS 12154 could not resolve service name.
What I am missing ?
From
P
SID = GAV
hostname = srvprod1
From,
P

Funny thing about this tool is I can connect right now with
PL/SQL developer client and sqlplus client from my PC
successfully but I can not connect through the dbastudio tool
But,
When I tried to connect to dbastudio it is connecting ... I can see in
on DB server that it has been connected with 1521
but nothing is happening on dbastudio tool screen.
Here is the string from tnsnames.ora from my PC file.
GAV_SRVPROD1.PLUS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvprod1)(PORT = 1521))
(CONNECT_DATA = (SID = GAV)(SERVER = DEDICATED))
From
P

Intermittent errors - Invoke() could not find the Service name

Users are getting intermittent error : Invoke() could not find the Service name, when opening the Xcelsius dashboards in PRODUCTION. The dashboard has several QAAW queries .These errors are poping up intermittently.
The dashboards are hosted utside the BO environment.
BOXIR3.1
Crystal Xcelsius 2008 Enterprise

As I continue to look into it, the only thing that I see differently when I am prompted for login is that I can specify the system to log into. I am now wondering if somehow this information is being lost and that is what is causing these issues. Given that the specified name cannot be found and that it does in fact recognize the correct name, I'm not entirely sure what the problem is.
Further information:
If I disable the use of hard-coded logins and I am prompted, I can display results for the onLoad run. Yet the query is also set to refresh on 30 second intervals. On every subsequent interval I am getting this error.
I think this has something to do with sessions. How do I check which sessions exist on my box? CmcApp somewhere?
Edited by: Brian Comeau on Jun 4, 2009 12:24 AM
Checking in CmcApp I found some sessions. Here is what happens:
Login to CmcApp Sessions tab
-Administrator: 1 session at 5:45pm
Launch browser to Xcelsius .swf
Prompted for login information: Administrator/password
-Administrator: 2 sessions at 6:30pm
I had previously set the timeout for sessions in QaaWS to 120 seconds
After 2 minutes
-Administrator: 1 session at 5:45pm
Yet throughout this time, I am still given this "invoke() could not find the service name" error. The name provided "qaawsIncidents" is the same name that I can see if I launch QaaWS.
Ideas?
Edited by: Brian Comeau on Jun 4, 2009 12:30 AM

To detect the service name of the DB

Similar Messages

Maybe you are looking for