To determine the credit control areas for the customer

Hi all,
Two credit control areas will be maintained for a customer. During sales order entry, based on material group of the material specified, credit control area should be determined through user exit.
May i have which user exit will help me, also i used USER_CREDIT_CHECK1. Its not working.
Expecting reply

You can not set the credit control at material level it is at company code level only and we can give credit limit to customer code wise
If having any other requirment please let me know about it
Points if helpfull
Rg Ajit

Similar Messages

To determine the Two credit control areas for the customer

Hi all,
Two credit control areas will be maintained for a customer. During sales order entry, based on material group of the material specified, credit control area should be determined through user exit.
May i have which user exit will help me, also i used USER_CREDIT_CHECK1. Its not working.
Expecting reply

hi Ravi,
USER_CREDIT_CHECK1 is not an exit, do you know what are you talking about?
Eric Cartman

Change the Credit control area with balances

Hi,
The requirement is there are two credit control areas, XX10, XX12. Now they want only one credit control area ie XX12,( all customers which are in XX10, should be now with XX12 credit control area) but when changing the credit control area of a particular customer from XX10 to XX12, the credit limit and exposure is not displayed in new credit control area. ( Tcode Fd32)
How can we upload all customers and balances to new Credit control area.
Thanks
SM

Hi
Please see note 335295 which can help you
with kind regards
Cora

Can we have 2 credit control area for one sales organisation

hi,
sap gurus,
good afternoon,
can we have 2 credit control area for one sales organisation.
plz explain the impact from taking fi and sd into consideration.
regards,
balaji.t
09990019711

Dear Balaji,
We can't assign credit control area to the sales organisation
Sales area will be assigned to the Credit control area
Only one credit control area will be assigned to each sales area.
More then one credit control area will not be assigned to single sales area.
But one Credit control area we can assign to more than one sales areas.
I hope it will help you,
Regards,
Murali.

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

Different Credit control area in the AR invoice document

Hi all,
Our client has the line item display field turned on for the AR reconcilation account. When we run FBL3N for this account, we see a credit control area that is different from what is there on the customer line item in the invoice document.
When the invoice was entered in FB70, the default credit control area (that defaults from OB38 - co code assignment to cca) was manually overwritten. The invoice document, FBL5N and BSEG table show the new cca, but for some reason FBL3N for the recon account is still showing the old, default cca.
Did anyone come across a similar scenario?

Hi Chait!
I have the same problem do you get any positive response about this issue?
Thanks in advance!
Regards
Daniel

Two credit control are at the same sales order.

Hello Gurus,
I would like to know how if you can help with the following subject:
I have two sales area:
XXXX YY A1
XXXX YY A2
And for each sales area it´s assigned two credit control areas, like:
XXXX YY A1 to credit control area A
XXXX YY A2 to credit control area B
Is it possible to create a sales order with these two sales area?
We need to have credit control limit differents for sales area (customers), but also we like two have only one sales order to manage. Is it possible?
Many thanks in advanced.
Luiz Geraldi

Hi Luiz,
In sales booking screen VA01 t-code we have the following fields as necessary input.
Order Type
Sales organization
Distribution channe
Division
Sales office
Sales group
All these fields need to be unique in order to save this document.
So we can input any number of materials provided the above details are unique.
We can have more than 1000 line items, but all these materials need to be in a single sales organization, distribution channel and division.
As this is a standard SAP functionality, i am afraid there is no customization by which we can change this (as far i my knowledge goes)
Hope i am right in my approach,
correct me if i am wrong;
Let me know if you have further concerns;
Regards,
Syed Nasir

Can we assign 2 credit control area for one company codes

hi,
sap gurus,
can we assign 2 credit control areas to one company codes ?
yes we can.
but
what is the impact of that
can any one analyse.
regards,
balaji.t
09990019711

Hi,
we can have multiple credit control areas based on req-
eg: client wants to restrict customer based on divisoin wise.
then we will maintain credit control area based on sales area
there 3 division in a comp: AA -BB - CC
thens sales areas will be:
1000-10 -AA
1000-10-BB
1000-10-CC ( assuming therez one sales org-1000 & dc 10)
now create 3 cr control areas- OB45
Assign sales area to cr Control area - OVFL
Assign permitted credit control areas to comp code - IMG- FA- AR&AP- Credit Management- Credit control account - Assign permitted credit control areas to comp code.
Now you can assign this Cr CA- by sales area wise in CMR & maintain the credit limits for each Cr CA.
So when ever your needs wants to do it by division or sales area wise you can do this.
Thanks,
Raja

Multiple credit control areas for 1 company code

Hi experts,
My client is using ECC6 version and they activated credit control area, as I know that 1 company code can have 1 credit control area and 1 credit control can be assigned with multiple company codes,. but in one of my client company code is assigned to 4 credit control area through
u201CFinancial Accounting (New)- Accounts Receivable and Accounts Payable-Credit Management-Credit Control Account-Assign Permitted Credit Control Areas to Company Codeu201D-
Can anyone let me know how this functionality will work? Any additional impact will be there when compare to 1:1 scenario? And what are the details we need to update in FD32 when we assign multiple credit controls for 1 company code.
Regards
babu

Hi,
The multiple assignemnet of credit control allows you to use multiple credit control for customers. Thus in FD32 you can use these assigned different credit control area and maintain the credit limit for each area.
Regards
Milind Sonalkar

I want to know what the phone numbers are for the 2 iphones associated to itones

need to find the phone numbers for the 2 iphones associated with my itune account.

I think they are any device associated with your Apple ID that you have downloaded items from the apple or iTunes Store to. I'm sorry that I don't understand all this. My account shows that I have my iPad and 2 iPhones in use but I have had a lot of phones and I don't know which ones I used. One of them may also belong to my ex husband. Yuck
Thanks for your patience,
Rhonda
Sent from my iPad
Rhonda White

Does anyone know of an official Apple document that states what the supported characters are for the firmware security for all Intel based Macs?

Same question for user account passwords on 10.8 and later: Is there an official Apple document stating the valid characters for a user's local password?
The reason that I'm asking is that years ago on the Open Firmware Macs you couldn't use the capital letter "U" in the firmware password. Then there were issues on 10.5 when the user's password was changed and started with the '$' character

The only documentation that Apple's provided on securiy ended with Snow Leopard. Peruse these. For Lion and beyond, all I can offer are these, but I don't know if they'll answer the question. Finally, contact Apple's Express Lane and see what they say.
UPDATE: Found this which states: Use a secure password that contains both numerals and letters in the first eight characters.

Can you help me editing the credit card no. for the monthly payment of my team account (Creative Cloud for teams for A\Tratti)?

How can I do?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Sales order credit control area

Hi,
How can i identify the credit control area the sales order belongs to?
Is there any way to identify in the SO itself?
(not checking the sales org and checking the cc ar)

Credit Control
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Credit Management
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
u2022 SM30 - Table/View
u2022 V_TVTW - Define Distribution Channel
u2022 V_TVTA_KKB - Assign sales area to credit control area
u2022 V_T014 - FI - Define Credit Control Area
u2022 T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel
Division
Distribution Channel
Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022 Check Credit
o A - Credit limit check and warning message
o B - Credit limit check and error message (no sales order can be created)
o C - Credit limit check and delivery block (block delivery if hit credit limit)
 Options B and C -> used for checking open order values (when you create/change the sales order)
o D - Automatic credit control with open order values
 More control in transaction OVA8 - Automatic credit control
 You check for open orders and deliveries, or just open deliveries.
 or open order values with other options
u2022 Credit group
o Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022 whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022 Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022 SAP default credit groups
o 01 - credit group for sales order
o 02 - credit group for delivery
o 03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items you can have the followings credit limit check:-
u2022 Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022 Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.Max open items %
The customer balance must not exceed a certain percentage.
u2022 Oldest open items
If you donu2019t want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022 Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022 Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.You can use the u201CNextReview dateu201D and u201CNumber of daysu201D fields and combined it with the u201CLast int.reviewu201D field in customer credit master u201CStatusu201D view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
Releasing the Credit Block
These are the three transaction code you can used for releasing the SAP credit management block.
VKM3 - Sales Order
VKM5 - Delivery Order
VKM4 - Both Sales Order and Delivery Order
There are basically two types of customers:
1)Credit worthy
2)Normal customers
Coming to credit worthy customers these customers we can believe and we will give some credit ness for them.For such a type of customers we are going to set them some credit limit.Based on that we will give service to them till that limit.It the limit crosses we will get the messages while creating orders for them.
Their credit limit can be set in FD32 T.Code.
Automatic credit check will be maintained in OVA8
Follow these steps:
1. Go to IMG - enterprise structure - definition - financial accounting - define credit control area.
2. Assignment of company code to credit control area & sales area to credit control area.
3. Go to OVAK select ur sales document type and in the check credit column choose from A B or C. D is for automatic credit control for which you have to maintain the credit group and risk categories.
4. In FD32 you select your customer and click on STATUS icon and press enter. here u maintain the credit amount allowed. but this is done by the Finance people.
5. Now when you create the sales order and if the amount exceeds the credit limit then u will get the message as you maintained in the TC OVAK. Normally the system starts doing credit checks from the second sales.
order.
What are the different types of credit checks?
By Sunilmadho
Credit Check can be :
1) Simple Credit Check
2) Automatic Credit Control
Automatic Credit Control can be at various levels :
1) Order
2) Delivery
3) Goods Issue
Automatic Credit Check is of many types :
1) Static
2) Dynamic
3) MaximumDocument Value
4) Maximum Open Items in percentage
5) Oldest Open Item in number of days
6) Crtitical fields change
7) Highest dunning level, etc.
You can create more.
Credit Check happens only in SD module, never in FI. Because the stage of the check is in the sales cycle, which exists in SD. FI guys will check the credit master sheets of the customer, the MIS, the analysis etc, review the credit limits of customers. But the check will happen only in SD, while creating order, delivery or doing the goods issue.
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
SM30 - Table/View
u2022     V_TVTW - Define Distribution Channel
u2022     V_TVTA_KKB - Assign sales area to credit control area
u2022     V_T014 - FI - Define Credit Control Area
u2022     T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
                  Distribution Channel
                              Division
                  Distribution Channel
                              Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022     Check Credit
o     A - Credit limit check and warning message
o     B - Credit limit check and error message (no sales order can be created)
o     C - Credit limit check and delivery block (block delivery if hit credit limit)
     Options B and C -> used for checking open order values (when you create/change the sales order)
o     D - Automatic credit control with open order values
     More control in transaction OVA8 - Automatic credit control
     You check for open orders and deliveries, or just open deliveries.
     or open order values with other options
u2022     Credit group
o     Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022     whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022     Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022     SAP default credit groups
o     01 - credit group for sales order
o     02 - credit group for delivery
o     03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items
You can have the followings credit limit check :-
u2022     Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022     Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.
Max open items %
The customer balance must not exceed a certain percentage.
u2022     Oldest open items
If you don't want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.
Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022     Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022     Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.
You can use the "NextReview date" and "Number of days" fields and combined it with the "Last int.review" field in customer credit master "Status" view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
In credit mgmt how the Amount & limit can be can be configured at sales order,delivery & PGI Level.
Please give me the solution .
1)First create Credit control area
Path:IMG\ES\Definition\FA\Define Credit Control Area
2) Assign your credit control area to your company code
Path:IMG\ES\Assignment\FA\Assign Company code Credit Control Area
3) And enter the credit limit using above mentioned transaction code FD32.
4) And assign this credit control area in your customer master Sales Org Data (XD02)
5)if you have maintained the credit control area for your customer then goto T.Code FD32.
6)Enter your customer number and the credit control area.
7)Select the status tab.Press enter.
8)Maintain the credit limit in the field.Save.
9)Go to OVA8 T.Code and then click on open orde

Where is credit control Area in sales order.The field.??

Hi all
where is credit control Area in sales order.The field.??
Ahmed

Hi Sadhu,
You may get the wrong infomation if you only checking the credit control area for customer master.
During sales order creation the system determines the relevant CCA. This is done in 4 steps in the following sequence:
1.      Userexit
2.      Credit control area of the payer (XD03)
3.      Credit control area of the Sales Area (OVFL)
4.      Credit control area of the Company Code (OB38)
As far as the system can determine a CCA it leaves the sequence.
So there maybe no credit control area in customer master data for the payer. But if there is one maintained for sales area or company code or in userexit, the sales order can get one CCA determined. I recommand using the check_cm report because it tells you the correct info.
Regards,
Smile

Credit control area to sales area

hi sd gurus
can we have credit control are setup to sales area,when it is already setup in company code,,,,..
thanks
regards
vivek

hi,
If we want to use more than one credit control area for same customer or one customer is dealing with more than one sales area and for each sales area u have to maintain different credit limits then wehave to use more than one credit control area for that customer then we assign sales area to that credit control areas.
transaction code for assigning the credit control area to the sales area is OVFL
pls reward points if the answer is helpful
Regards,
Murali

To determine the credit control areas for the customer

Similar Messages

Maybe you are looking for