To enter Trading Partner data for vendor posting using SGL indicator

Hi,
I am trying to post a vendor document using f-02, with posting key 29, with a special GL indicator. I need to input the trading partner data. However, I could not find the field under "more data". There was no "further data" selection. I was also not able to enter the trading partner via the path : Extras -> trading partner.
Please advice how to pull out the field for trading partner for posting using special GL indicatior. I have checked the PK variant screen and the field status group variant ansd could not find the field trading partner.
Thanks.
Angel.

Hi,
already maintained in vend master data, OBA7, OBC4, OB41 were also maintained.
But the thing is, the trading partner field did not appear on the posting screen. I was prompted with an message that trading partner is a required field as I have set it as mandatory. And the system ask me to input under "further data". But i cannot find that option. Neither can I find the trading partner field.
Please assist.
Angel.

Similar Messages

  • Customized LSMW (Batch Input Recording) to upload data for Vendor

    Hello Fiends,
       can u help me on this object and how to upload in xk01.
            Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
    With best wishes,
    Chandu.
    Point will be rewarded....

    Hi,
    Go through the following link, you will find your answer
    http://www.sapbrain.com
    Regards,
    Bhaskar

  • FB01 Enter Trading Partner for Posting Key 01 (Customer Invoice)

    Dear Experts,
    I would like to ask is it possible to enter the Trading Partner for the FI Document line item with Posting Key 01.
    I can modify the Trading Partner for Posting Key 40 and 50 but I cannot find field in the More Data Button.
    Can anyone help me to solve this issue?
    Thanks.

    hi,
    Check whether the document type you are using to post is allowed to enter the trading partner.
    To check use the TCODe OBA7  and select the relevent document type. then select the check box enter trading partner under control data.
    and also check the customer you assigned for that posting key 01 is got assigned trading partner in the master record or not(TCOD XD02/XD03).
    thanks.

  • Trading partner Data missing in FBL3N report for GL stock account

    Hi All,
    Can anyone help me identify the reasons why I am not able to view trading partner data when I run FBL3N t-code to view the line items of my GL stock account?
    Many Thanks in Advance for your help,
    Vignesh

    Hi ,
    When I am able to view the Trading partner details when I run customised program (which pulls data from customised table). May I know the reason why I am not able to find out the same details when I run FBL3N T-code?
    In the given case, I pulled out details of stock by trading partner by running a customised program. I expected the same by running FBL3N for Stock GL account. But the details of trading partner is missing for many line items
    Many Thanks in Advance for your help,
    Vignesh

  • Enter trading partner in "F-90"

    Dear Experts,
    Am posting a vendor invoice for Main Asset, at the 1st screen i enter pstykey 31 and vendor no. and on the nxt screen the amount, pstykey 70,account number of the main asset (20001 0) and transaction type 100.
    But it displays a warnin message at the time of posting saying "enter trading partner" and after pressing enter to that warning message it displays an error message stating "contact your system admin (system error)"
    Kidnly help me resolving this issue.
    Regards,
    Prashant Goel

    No, its an external acquisition... that's why using trasncation type "100"
    while clickin the error, the message dispalyed is -
    Contact your system administrator (table error)
    Message no. AA824
    Diagnosis
    No accounts have been entered for depreciation area 01 for account allocation ESL20000 (chart of accounts ESL).
    Procedure
    Maintain the accounts for depreciation area 01.

  • Error "You cannot enter a partner function for output NEU"

    Hi Experts,
    I'm having these error "You cannot enter a partner function for output NEU" (message VN041) when I tried to assign a partner function (e.g OA)  in the conditions records for application "EV" (Purchase outline agreement). The system do not allow me to do this for any doc type (LP, LPA, MK, OA, etc). I'm using t-code NACE or MN08.
    I want to assign partner for key combination "Document Type". The conditions is already there but with no value, so I want to assign partner function "OA" or "VR".
    I already check all the configuration and looks fine. For example, define possible partner functions for output type "NEU" for application "EV" (Purc outline agree).
    Hope you can help me to find the problem.
    Thanks,
    Mairo.

    I have the error in NACE or using tcode MN08.
    As soon I executed those transaction the system shows the condition records created for varios Doc Type (e.g LP, LPA, MK, etc) but with no partner function assigned. For example:
    Doc. Type /  Name                     /             Funct  /   Partner     /            Medium  /  Date/time  /   Language
    LP        /       Scheduling Agreement     /  blank  / blank  /                                          2      /          3   /              EN
    LPA      /      Scheduling Agreement                              / blank    / blank   /                1        /       3         /        EN
    For example, I try to assign function "OA" for Doc. Type "LP", choose value from quickpick. Then when I press enter, the system give me the error "You cannot enter a partner function for output NEU", message no. VN041. Do not allow me to continue, so I have to leave this field blank, with no change.
    Thanks,

  • BAPI_PO_CREATE1 - In case of account assignment, please enter acc. assignment data for item

    Hi,
    Currently I'm facing an error "In case of account assignment, please enter acc. assignment data for item" when create a Purchase Order using BAPI_PO_CREATE1. The condition of the data that need to pump into the system is that this PO is an open item PO where does not require a metarial code for input, but it will pump in Short Text and Material Group. Other than that, the account assignment category is "K" and the item category is "9".
    Below is the coding that I have implemented.
    IF wa_temp_upr1-waers IS NOT INITIAL.
           MOVE wa_temp_upr1-waers TO wa_header-currency.
           wa_headerx-currency = abap_true.
         ENDIF.
         MOVE: wa_temp_upr1-lifnr TO wa_header-vendor,
               wa_temp_upr1-unsez TO wa_header-collect_no,
               wa_temp_upr1-bukrs TO wa_header-comp_code,
               sy-datum      TO wa_header-doc_date,
               sy-langu      TO wa_header-langu,
               'KTN1'        TO wa_header-purch_org,
               wa_temp_upr1-bkgrp TO wa_header-pur_group,
               wa_temp_upr1-zterm TO wa_header-pmnttrms.
         wa_headerx-collect_no = abap_true.
         wa_headerx-po_number = abap_true.
         wa_headerx-comp_code = abap_true.
         wa_headerx-vendor = abap_true.
         wa_headerx-doc_date = abap_true.
         wa_headerx-langu = abap_true.
         wa_headerx-purch_org = abap_true.
         wa_headerx-pur_group = abap_true.
         wa_headerx-pmnttrms = abap_true.
         IF wa_temp_upr1-meins IS NOT INITIAL.
           MOVE wa_temp_upr1-meins TO zunit_e.
           CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
             EXPORTING
               INPUT                =  zunit_e
               LANGUAGE             = 'E'
             IMPORTING
               OUTPUT               = zunit_e.
           IF SY-SUBRC <> 0.
    * Implement suitable error handling here
           ELSE.
             MOVE zunit_e TO wa_temp_upr1-meins.
           ENDIF.
           MODIFY it_upr1 FROM wa_temp_upr1.
         ENDIF.
         ADD 10 TO line_item.
         CALL FUNCTION 'NUMBER_GET_NEXT'
           EXPORTING
             NR_RANGE_NR = '01'
             OBJECT      = 'SERVICE'
           IMPORTING
             NUMBER      = pckg_no.
         IF SY-SUBRC <> 0.
    * Implement suitable error handling here
         ENDIF.
         CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
           EXPORTING
             INPUT  = wa_temp_upr1-matnr
           IMPORTING
             OUTPUT = wa_po_item-material.
         MOVE: line_item TO wa_po_item-po_item,
               wa_temp_upr1-ewerks TO wa_po_item-plant,
               wa_temp_upr1-lgort TO wa_po_item-stge_loc,
               wa_temp_upr1-matnr TO wa_po_item-material,
               wa_temp_upr1-menge TO wa_po_item-quantity,
               wa_temp_upr1-peinh TO wa_po_item-price_unit,
               wa_temp_upr1-netpr TO wa_po_item-net_price,
               wa_temp_upr1-meins TO wa_po_item-po_unit,
               wa_temp_upr1-afnam TO wa_po_item-preq_name,
               wa_temp_upr1-eeind TO wa_po_item-price_date,
               ' ' TO wa_po_item-gr_ind,
               'X' TO wa_po_item-ir_ind,
               'X' TO wa_po_item-prnt_price,
               ' ' TO wa_po_item-distrib.
         wa_po_item-acctasscat = 'K'.
         MOVE pckg_no TO wa_po_item-pckg_no.
         wa_po_itemx-pckg_no = abap_true.
         IF wa_temp_upr1-bismt IS INITIAL.
           MOVE: wa_temp_upr1-short_text TO wa_po_item-short_text,
                 wa_temp_upr1-matl_group TO wa_po_item-matl_group,
                  '9' TO wa_po_item-item_cat.
           wa_po_itemx-short_text = abap_true.
           wa_po_itemx-matl_group = abap_true.
           wa_po_itemx-item_cat = abap_true.
           wa_potext-po_item = wa_po_item-po_item.
           wa_potext-text_id = 'F01'.
           APPEND wa_potext TO it_potext.
         ENDIF.
         MOVE wa_po_item-po_item TO wa_po_itemx-po_item.
         wa_po_itemx-plant = abap_true.
         wa_po_itemx-po_itemx = abap_true.
         wa_po_itemx-stge_loc = abap_true.
         IF wa_po_item-material IS NOT INITIAL.
           wa_po_itemx-material = abap_true.
         ENDIF.
         wa_po_itemx-quantity = abap_true.
         wa_po_itemx-price_unit = abap_true.
         wa_po_itemx-net_price = abap_true.
         wa_po_itemx-po_unit = abap_true.
         wa_po_itemx-preq_name = abap_true.
         wa_po_itemx-price_date = abap_true.
         wa_po_itemx-acctasscat = abap_true.
         wa_po_itemx-gr_ind = abap_true.
         wa_po_itemx-distrib = abap_true.
         wa_po_itemx-part_inv = abap_true.
         APPEND wa_po_item TO it_item.
         APPEND wa_po_itemx TO it_itemx.
         CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = wa_temp_upr1-kostl
             IMPORTING
               OUTPUT = wa_temp_upr1-kostl.
           wa_account-costcenter = wa_temp_upr1-kostl.
           ADD 1 TO l_acc.
           ADD 10 TO v_po_item.
           MOVE v_po_item TO wa_account-po_item.
           MOVE '01' TO wa_account-serial_no.
           APPEND wa_account TO it_account.
           wa_accountx-costcenter = abap_true.
           MOVE v_po_item TO wa_accountx-po_item.
           MOVE '01' TO wa_accountx-serial_no.
           wa_accountx-SERIAL_NOX = abap_true.
           wa_accountx-po_itemx = abap_true.
           APPEND wa_accountx TO it_accountx.
    *********** services
           wa_services-pckg_no = pckg_no.
           wa_services-line_no = '0000000001'.
           wa_services-outl_ind = 'X'.
           wa_services-subpckg_no = pckg_no + 1.
           wa_services-quantity = wa_temp_upr1-menge.
           wa_services-base_uom = wa_temp_upr1-meins.
           wa_services-price_unit = wa_temp_upr1-peinh.
           wa_services-gr_price = wa_temp_upr1-netpr.
           IF wa_temp_upr1-short_text IS NOT INITIAL.
             wa_services-short_text = wa_temp_upr1-short_text.
           ENDIF.
           APPEND wa_services TO it_services.
           CLEAR:  wa_services,
                   val_lin.
           wa_services-pckg_no = pckg_no + 1.
           wa_services-line_no = '0000000002'.
           wa_services-quantity = wa_temp_upr1-menge.
           wa_services-base_uom = wa_temp_upr1-meins.
           wa_services-price_unit = wa_temp_upr1-peinh.
           wa_services-gr_price = wa_temp_upr1-netpr.
           IF wa_temp_upr1-short_text IS NOT INITIAL.
             wa_services-short_text = 'SERVICE 1'.
           ENDIF.
           IF NOT wa_temp_upr1-matl_group IS INITIAL.
             wa_services-matl_group = wa_temp_upr1-matl_group.
           ENDIF.
           APPEND wa_services TO it_services.
    ************* service account assignment
           wa_services_acc-pckg_no = pckg_no + 1.
           wa_services_acc-line_no = '0000000002'.
           wa_services_acc-serno_line = '01'.
           wa_services_acc-quantity = wa_temp_upr1-menge.
           wa_services_acc-serial_no = '01'.
           wa_services_acc-net_value = wa_temp_upr1-netpr.
           APPEND wa_services_acc TO it_services_acc.
           CALL FUNCTION 'BAPI_PO_CREATE1'
             EXPORTING
               POHEADER          = wa_header
               POHEADERX         = wa_headerx
               TESTRUN           = pa_test
               NO_PRICE_FROM_PO  = 'X'
             IMPORTING
               EXPPURCHASEORDER  = va_ebeln
               EXPHEADER         = wa_expheader
             TABLES
               RETURN            = it_return
               POITEM            = it_item
               POITEMX           = it_itemx
               POACCOUNT         = it_account
               POACCOUNTX        = it_accountx
               POSERVICES        = it_services
               POSRVACCESSVALUES = it_services_acc
               POTEXTITEM        = it_potext.
    I have done some search regarding this error and try to implemented it, but still does not working.
    example website that i found for this error is:
    David Klein's Corner: SAP Purchase Order Creation Error via BAPI - &quot;In case of account assignment, please enter acc…
    PO Upload through BAPI_PO_CREATE1 - Problem in Service Item
    Currently my system is using: SAP_APPL SAPKH60604
    I am really stuck on this error. Hope you all can help me on this matter.
    Thanks.

    Hi,
    Filling the service line have the problem,
    while filling the services we must follow correct order,
    Here You entering the new services, first manually create purchase order after that observe the table
    'ESLL' and use the FM;-' MS_FETCH_SPEC_FOR_LIST' how the services are inserting after that you also follow the same order.
    if service entries are created before the creation of the PO.
    then follow as bellow....
    SELECT * FROM esll INTO TABLE lt_esll WHERE packno = wa_tmp_spec-packno.
       IF sy-subrc = '0'.
         LOOP AT lt_esll.
           CLEAR :  lt_poservices.
           lt_poservices-pckg_no    = lt_esll-packno .
           lt_poservices-line_no    = lt_esll-introw .
           lt_poservices-ext_line   = lt_esll-extrow .
           lt_poservices-outl_level = lt_esll-rang .
           lt_poservices-outl_no    = lt_esll-extgroup .
           lt_poservices-outl_ind   = lt_esll-del .
           lt_poservices-subpckg_no = lt_esll-sub_packno .
           lt_poservices-service    = lt_esll-srvpos .
           lt_poservices-edition    = lt_esll-ausgb .
           lt_poservices-ssc_item   = lt_esll-stlvpos .
           lt_poservices-ext_serv   = lt_esll-extsrvno.
           lt_poservices-quantity   = lt_esll-menge .
           lt_poservices-base_uom   = lt_esll-meins .
           lt_poservices-ovf_tol    = lt_esll-uebto .
           lt_poservices-ovf_unlim  = lt_esll-uebtk .
           lt_poservices-gr_price   = lt_esll-tbtwr .
           lt_poservices-from_line  = lt_esll-frompos .
           lt_poservices-to_line    = lt_esll-knt_introw.
           lt_poservices-short_text = lt_esll-ktext1 .
           lt_poservices-distrib    = lt_esll-vrtkz .
           lt_poservices-pers_no    = lt_esll-pernr .
           lt_poservices-wagetype   = lt_esll-lgart .
           lt_poservices-con_pckg   = lt_esll-knt_packno.
           lt_poservices-con_line   = lt_esll-knt_introw .
           lt_poservices-matl_group = lt_esll-matkl .
           lt_poservices-taxjurcode = lt_esll-txjcd.
           lt_poservices-tax_code   = lt_esll-mwskz .
           lt_poservices-date       = lt_esll-sdate .
           APPEND  lt_poservices TO lt_poservices[].
           CLEAR lt_esll.
         ENDLOOP.
       ENDIF.
       CALL FUNCTION 'MS_FETCH_SPEC_FOR_LIST'
         EXPORTING
           spec_packno            = wa_tmp_spec-packno
    *     ONLINE_DATA            = ' '
    * IMPORTING
    *     LIMIT                  =
         TABLES
           servicetab             = lt_ml_esll1
    *     LIMITTAB               =
         EXCEPTIONS
           no_specification_exist = 1
           OTHERS                 = 2.
       IF sy-subrc <> 0.
    * Implement suitable error handling here
       ENDIF.
       LOOP AT lt_ml_esll1 INTO DATA(ls_ml_esll1).
         CLEAR :  lt_poservices.
         lt_poservices-pckg_no    = ls_ml_esll1-packno .
         lt_poservices-line_no    = ls_ml_esll1-introw .
         lt_poservices-ext_line   = ls_ml_esll1-extrow .
         lt_poservices-outl_level = ls_ml_esll1-rang .
         lt_poservices-outl_no    = ls_ml_esll1-extgroup .
         lt_poservices-outl_ind   = ls_ml_esll1-del .
         lt_poservices-subpckg_no = ls_ml_esll1-sub_packno .
         lt_poservices-service    = ls_ml_esll1-srvpos .
         lt_poservices-edition    = ls_ml_esll1-ausgb .
         lt_poservices-ssc_item   = ls_ml_esll1-stlvpos .
         lt_poservices-ext_serv   = ls_ml_esll1-extsrvno.
         lt_poservices-quantity   = ls_ml_esll1-menge .
         lt_poservices-base_uom   = ls_ml_esll1-meins .
         lt_poservices-ovf_tol    = ls_ml_esll1-uebto .
         lt_poservices-ovf_unlim  = ls_ml_esll1-uebtk .
         lt_poservices-gr_price   = ls_ml_esll1-tbtwr .
         lt_poservices-from_line  = ls_ml_esll1-frompos .
         lt_poservices-to_line    = ls_ml_esll1-knt_introw.
         lt_poservices-short_text = ls_ml_esll1-ktext1 .
         lt_poservices-distrib    = ls_ml_esll1-vrtkz .
         lt_poservices-pers_no    = ls_ml_esll1-pernr .
         lt_poservices-wagetype   = ls_ml_esll1-lgart .
         lt_poservices-con_pckg   = ls_ml_esll1-knt_packno.
         lt_poservices-con_line   = ls_ml_esll1-knt_introw .
         lt_poservices-matl_group = ls_ml_esll1-matkl .
         lt_poservices-taxjurcode = ls_ml_esll1-txjcd.
         lt_poservices-tax_code   = ls_ml_esll1-mwskz .
         lt_poservices-date       = ls_ml_esll1-sdate .
         APPEND  lt_poservices TO lt_poservices[].
         CLEAR ls_ml_esll1.
       ENDLOOP.
       CLEAR : lt_poservices.
    *& Filling the po service values internal table from service internal table
       LOOP AT lt_poservices[]  INTO lt_poservices WHERE gr_price GT 0.
    READ TABLE lt_ml_esll1 INTO wa_msll WITH KEY  packno = lt_poservices-pckg_no
                                               introw = lt_poservices-line_no
                                            extrow = lt_poservices-ext_line..
         IF sy-subrc EQ 0.
           CLEAR lt_posvalues.
           lt_posvalues-pckg_no    = wa_msll-packno.
           lt_posvalues-line_no    = wa_msll-introw.
           lt_posvalues-quantity   = wa_msll-menge.
    *      lt_posvalues-net_value  = wa_msll-netwr.
           lt_posvalues-serno_line = '01'.
           lt_posvalues-serial_no  = '01'.
    *      lt_posvalues-percentage = '100'.
           APPEND lt_posvalues TO lt_posvalues[].
           CLEAR : wa_msll.
         ENDIF.
       ENDLOOP.
    note:- if  it is correct give points

  • Creation of new partner function for VENDOR

    Hi,
    I've a requirement to create some Partner functions for vendors while creation of vendor. Some Partner functions are available by default and some we need to add. but while doing a BDC we are not able to find how many of them are available or where to put the new Partner function?
    Please let me know, if there is any BAPI availble..
    Regards,
    Anupam

    Try below LSMW batch input method its very esay to upload data
    Object               0040   Vendor master
    Method               0001   Standard
    Program Name         RFBIKR00
    Program Type         B   Batch Input

  • Entering Business Partner data from IC Webclient - CRM2007

    Just wanted to check that if I enter Business partner data from the IC Webclient is the data stored in the CRM backend tables for example BUT000, BUT050 etc and if so is this done on the fly or a scheduled update? If not what tables are they stored in.  Also can I see the same information once it is entered in the webclient via the CRM transaction BP Thanks

    Hi Niten,
    The tables are the same (for example: but000 for master partner data, but050 for relations, and so on...).
    The data is updated when you press the respective save button, or when you press the 'end' button at telephony bar (to end an Interaction Center Interaction).
    And yes, you can then check the information in BP t-code.
    Just try it and see by yourself
    Kind regards,
    Garcia

  • Can I use one Business Partner repository for Vendor and Customer?

    Can I use one Business Partner repository for Vendor and Customer? or do we have to use Vendor and Customer Repository separately. How can we do that? What are the pros and cons? can any one provide some examples:

    Hi Deepak
    The key purpose of SAP "enabling" the facility of multiple main tables in a repository is to primarily "manage" those master data objects that are related to each other. Typical examples will be a) Customer - Material, b) Supplier - Material, etc.
    While, it is pretty easy to add multiple main tables in a repository, it is also important to understand the purpose of doing so based on the business requirements.
    Besides, you got to be aware that in case you are "fixing" any issues with one main table (master data object) for which you have to unload the repository, the users will not be able to use the repository that has a main table defined for other master data object. Hence, there are pros and cons of using this capability of multiple main tables.
    So, it is really important to understand the "W's" - What, Why, When, Where, Who of Data modeling before actually working on the "H" - How to in the SAP MDM tool.
    Hope this helps.
    Regards
    Neelesh

  • Why is it when I enter a birthday date for a contact as the 12th of November 1993 that the birthday appears as the 11th of November and as the 19th birthday rather than the correct 20th?

    Why is it when I enter a birthday date for a contact as the 12th of November 1993 that the birthday appears as the 11th of November and as the 19th birthday rather than the correct 20th?

    Yoor post is very confusing. AOL's iPad magazine is called "Editions" and it's free. "The Daily" is put out by TheDailyHolding and is owned by Rupert Murdoch. You've already posted in another thread where the solution was given. Other people seem to have manged to get unsubscribed.
    Best of luck.

  • RE: In case of account assignment, please enter acc. assignment data for it

    Dear All,
    I am getting the Error : 'In case of account assignment, please enter acc. assignment data for item'. when I try to create a service PO(I mean when the 'Item Cat' = 9 (D) and Account assignment category as K) .
    I am populating POACCOUNT and POACCOUNTX structures of BAPI Correctly even the POSERVICES structure.
    I tried even by creating through me21n, there it is getting created correctly. The order in which I am trying to enter in ME21N is First I am providing Org Data,
    Next Item data with Acct assn cat as 'K' Item Category as 'D' short text, PO quantity, Order Unit, Net price, Material group, Plant,
    Requisitioner.
    Next it is prompting for Services data : short text, quantity, Unit, Gross price.
    Then it is prompting for Account assignment of service in line 10, there I am giving GL account, Cost center.
    It is creating the PO successfully.
    But when I try using BAPI (BAPI_PO_CREARE1) it is giving the error 'In case of account assignment, please enter acc. assignment data for item'.
    Please do the needful.
    Thanks & Warm Regards,
    Jayarama Krishna.

    Dear All,
    Who ever facing the above problem can use the below code, problem is solved.
    When we create Purchase Order using "BAPI_PO_CREATE1", it works for all cases but we can have problems when we create Service Items in PO. Either we get an error u201CPlease maintain services or limitsu201D or u201CIn case of Account assignment, please enter acc. assignment data for itemu201D.
    Service PO occurs when we enter item category u2018Du2019 (Service) and Account category u2018Ku2019 (Cost Center).
    When we use BAPI_PO_CREATE1 to create service PO, following tables are populated at item level:
    a) POITEM
    b) POITEMX
    c) POACCOUNT
    d) POACCOUNTX
    e) POSERVICES
    f) POSRVACCESSVALUES
    For service items: POITEM-PCKG_NO = u20180000000001u2019. (assign package no as a dummy number)
    Set PCKG_NO flag in POITEMX table as u2018Xu2019.
    Package No is the link that connect POITEM table to POACCOUNT table through tables POSERVICES and POSRVACCESSVALUES.
    Set POACCOUNT-SERIAL_NO to u201801u2019.
    Set same PCKG_NO to u20180000000001u2019 in POSERVICES table. Maintain two entries in POSERVICES table like this:
    WA_POSERVICES-PCKG_NO = u20180000000001u2019.
    WA_POSERVICES-LINE_NO = u20180000000001u2019.
    WA_POSERVICES-OUTL_IND = u2018Xu2019.
    WA_POSERVICES-SUBPCKG_NO = u20180000000003u2019. (Dummy No.)
    WA_POSERVICES-QUANTITY = u2018100.000u2019.
    WA_POSERVICES-BASE_UOM = u2018EAu2019.
    WA_POSERVICES-PRICE_UNIT = u20181u2019.
    WA_POSERVICES-GR_PRICE = u2018100.000u2019.
    WA_POSERVICES-SHORT_TEXT = u2018SERVICE TESTu2019.
    APPEND WA_POSERVICES TO IT_POSERVICES.
    WA_POSERVICES- PCKG_NO = u20180000000003u2019.
    WA_POSERVICES- LINE_NO = u20180000000002u2019.
    WA_POSERVICES-QUANTITY = u201810.000u2019.
    WA_POSERVICES- BASE_UOM = u2018EAu2019.
    WA_POSERVICES--PRICE_UNIT = u20181u2019.
    WA_POSERVICES-GR_PRICE = u2018100.000u2019.
    WA_POSERVICES-SHORT_TEXT = u2018SERVICE 1u2019.
    WA_POSERVICES-MATL_GROUP = u20180012u2019.
    APPEND WA_POSERVICES TO IT_POSERVICES.
    Set PCKG_NO as SUB_PCKG_NO in table POSRVACCESSVALUES this:
    WA_POSRVACCESSVALUES-PCKG_NO = u20180000000003u2019.
    WA_POSRVACCESSVALUES-LINE_NO = u20180000000002u2019.
    WA_POSRVACCESSVALUES-SERNO_LINE = u201801u2019.
    WA_POSRVACCESSVALUES-SERIAL_NO = u201801u2019.
    WA_POSRVACCESSVALUES-QUANTITY = u201910.000u2019.
    APPEND WA_POSRVACCESSVALUES TO IT_ POSRVACCESSVALUES.
    This logic will work definitely and PO Service Items will be created.

  • Calculate due date for vendor payment

    hi friends,
    In my project i need to calculate the due date for vendor payment.as my client maintain different payment terms for different vendors am not able to pick the payment key from t052 table and calculate the due date.
    do anyone have a solution for this......
    prajith

    Hi
    You can insert Payment terms in Vendor master and also you can change or assign payment term while making transaction.
    But first of all you should have payment term.
    IMG -- Financial Accounting -- Accounts Receivable and Accounts Payable -- Outgoing Invoices/Credit Memos -- Maintain Terms of Payments
    Regards,
    Amit

  • Settign partner function for vendor

    Hi..
    I am trying to configure partner function for a vendor who has different  oredring adress,
    Can anyone explain me the stpes / details of how to configure a Partner function for vendor so that when i give the partner function in PO the adress of the partner function should be displayed.
    And secondly if i create different partner function where do i maintain the address for each partner function.
    Suggestions will be rewarded..
    Regards

    Hi,
    check this thread
    Partner function
    thanks
    suresh

  • Trading partner in GL, Vendor and Customer master

    Hi
    This is with reference to the clarification on field Trading partner in GL, vendor and customer master
    We have 10 company codes and are using same COA in all co codes
    We have activated Enterprise Consolidation in system and interunit profit elimination exist in our case.
    Please clarify the following:-
    1) Is there any impact on consolidation module if we did not maintain trading partner in GL master, vendor master & customer master
    Thanks & Regards
    D D Asnora

    HI
    It will effect in Interunit eliminations. and all the transaction which occured betweeen inter-units will be effected.
    regards
    Hari p

Maybe you are looking for