To fetch archived data

Hi experts,
               I need to fetch the repair cost of workorder which is archived.I am able to fetch the workorder which is archived by replaceing the select query with /N/PBS/SELECT_INTO_TABLE FM.but unable to replace the select query
SELECT * FROM pmco
           INTO TABLE i_pmco
           FOR ALL ENTRIES IN i_objnr
           WHERE objnr = i_objnr-objnr
           AND   cocur = 'USD'
           AND   beltp = '1'
           AND   wrttp = '04'
           AND   versn = '000'.
through which the repair cost is generating if anybody knows how to replace this query or any other FM to replace this query and fetch the repair cost.Let me know about it.
Thanks

HI,
Not really sure what you mean.
/N/PBS/SELECT_INTO_TABLE is not a transaction, this is a function and can be called using se37 using /PBS/SELECT_INTO_TABLE. This is a general call function to get archived data.
What I don't understand is what this has to do with the select? The select is not part of the call function.
The call function should be called after the select to get the archived data from PM_ORDER.
regards
Mark
Edited by: Mark Wright on Jun 19, 2009 11:15 AM

Similar Messages

Reading archived data of different archive objects in Z programs

Hi,
   I have Z programs which are getting data from various tables. Now i needt to read archived data of those tables in my Z programs also. i.e. i need to modify those programs so that data archived for those tables should also be extracted. Now for exmple if the program is fetching data from MARA, EKKO, LIKP, KONP tables based on certain selection criteria, then how do i fetch archived data for same criteria as each of these tables may belong to different archive objects ? Please help me. Thanks in advance.

Hie Naganath
Using transaction SARA you can identify the archive objects for the tables you want to use.
For material master you can use object MM_MATNR, for Purchasing documents use object MM_EKKO, for conditions use SD_COND and for deliveries use object RV_LIKP.
Retrieve the archive key and offset from table ZARIXMM5 (for Purchasing documents) for your select options and pass the offset and key to function ARCHIVE_READ_OBJECT to get the handle and then pass the handle to function ARCHIVE_GET_TABLE to read the record. Have a look at the below code
select archivekey archiveofs into corresponding fields of table lt_arch_keys
               from zarixsd1 "SD Index table for billing documents
              where vbeln in s_docrng
                and kunrg in s_arc_kn
                and fkdat in s_arc_dt
                and fkart in s_arc_rt
                and vkorg in s_arc_og.
loop at lt_arch_keys assigning <fs_lt_arch_keys>.
*Read information from archive
    call function 'ARCHIVE_READ_OBJECT'
      exporting
        object         = 'SD_VBRK'
        archivkey      = <fs_lt_arch_keys>-archivekey
        offset         = <fs_lt_arch_keys>-archiveofs
      importing
        archive_handle = ls_handle
      exceptions
        others         = 1.
*Get the requested header detail data for billing document
    call function 'ARCHIVE_GET_TABLE'
      exporting
        archive_handle          = ls_handle
        record_structure        = 'VBRK'
        all_records_of_object   = 'X'
        automatic_conversion    = 'X'
      tables
        table                   = lt_vbrk "Header data
      exceptions
        end_of_object           = 1
        internal_error          = 2
        wrong_access_to_archive = 3
        others                  = 4.
*Get the requested line item detail data for billing document
    call function 'ARCHIVE_GET_TABLE'
      exporting
        archive_handle          = ls_handle
        record_structure        = 'VBRP'
        all_records_of_object   = 'X'
        automatic_conversion    = 'X'
      tables
        table                   = lt_vbrp "Line item data
      exceptions
        end_of_object           = 1
        internal_error          = 2
        wrong_access_to_archive = 3
        others                  = 4.
    clear: ls_vbrk.
    loop at lt_vbrp assigning <fs_lt_vbrp>.
      read table lt_vbrk into ls_vbrk with key vbeln = <fs_lt_vbrp>-vbeln.
      move-corresponding <fs_lt_vbrp> to lt_archive_records.
      move-corresponding ls_vbrk to lt_archive_records.
      append lt_archive_records to gt_archive_records.
    endloop.
endloop.
Do the same for your material master and condition records as well.
regards
Isaac Prince

Can CJI3 , CJIA be used for archived data

Hi,
CN83 has the option to fetch archived data , however do not find any such option with CJI3 , CJIA etc .
Like to know whether it is not feasible to used CJI3 etc for archived projects.
With regards,
Mrinal

Hi Virendra,
Thanks for yr reply.
I get the message
" Report CJI3 is not planned to be read from the archive".
" Report CJIA is not planned for archiving object PS_PROJECT"
With regards,
Mrinal

Re: Retriving archived data

Hi,
Two tables related to FI(BSEG, BKPF) have been archived, so currently there is no data in the database table . Now I have to reload the archived data again into the database tables for further processing.
Can you please advise, if this is a correct method?
If yes ? How do we do it ?
The SAP version used is 30F.
Thanks in advance.
BR// SSRmary

Hi Srmary,
For fetching archieved data you need to use following function modules in same sequence:
1) AS_API_READ
2) ARCHIVE_READ_OBJECT
3) ARCHIVE_GET_NEXT_RECORD
4) ARCHIVE_CLOSE_FILE
You can insert data in database table once you fetch the successfully by a simple program.
Reward points if helpful answer.
Ashven

Report for Archived data by using exicutable program.

Hi,
In already existed Zreport data is fetching from table like below.
SELECT belnr bewtp budat lfbnr lfpos FROM ekbe INTO TABLE it_ekbe
                                               WHERE bewtp IN ('R' , 'Q') "Only IRs
                                                  AND budat IN s_date.
Like the above in the report fetchnig data from somany tables so mant times.
Now my requirment is the archived consultants archived old data. some table are archived some are not archived.
So i need to fetch the old data also from the archived files. Achived consultants given below details.
zarixmm3------------>zerox table for MM related tables after archived the data.
I searched in google got some code to fetch the data from archived fiels. The below code.
1. I fetched the key archive key number from the zerox table.
SELECT archivekey FROM zarixmm3 INTO TABLE it_get
                                   WHERE budat IN s_date
                                     AND werks IN s_werks.
CLEAR : wa_ekbe.
LOOP AT it_get INTO wa_get.
v_arcdoc = wa_get-archivekey+0(6).
wa_arcindx1a-archivekey = wa_get-archivekey.
wa_arcindx1a-v_arcdoc = wa_get-archivekey+0(6).
CLEAR : wa_get.
APPEND wa_arcindx1a TO it_arcindx1a.
ENDLOOP.
SORT it_arcindx1a BY v_arcdoc.
REFRESH it_get.
CLEAR: v_arcdoc.
DELETE ADJACENT DUPLICATES FROM it_arcindx1a COMPARING v_arcdoc.
2. I passed the key in FMs.
LOOP AT it_arcindx1a INTO wa_arcindx1a.
v_key = wa_arcindx1a-archivekey+0(6).
CALL FUNCTION 'ARCHIVE_OPEN_FOR_READ'
    EXPORTING
      archive_document = v_key
*     archive_name     = wa_arcindx1-archivekey
      object           = 'MM_EKKO'
    IMPORTING
      archive_handle   = lv_handle
    EXCEPTIONS
      OTHERS           = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    EXIT.
ENDIF.
DO.
    CALL FUNCTION 'ARCHIVE_GET_NEXT_OBJECT'
      EXPORTING
        archive_handle = lv_handle
      EXCEPTIONS
        end_of_file    = 1.          "nur die Ausnahmen, auf die man
    IF sy-subrc <> 0.                "wirklich reagieren will
      EXIT.
    ENDIF.
    CALL FUNCTION 'ARCHIVE_GET_TABLE'
      EXPORTING
        archive_handle        = lv_handle
        record_structure      = 'EKBE'
        all_records_of_object = 'X'
      TABLES
        table                 = git_ekbe_temp
      EXCEPTIONS
        end_of_object         = 0.
    LOOP AT git_ekbe_temp ASSIGNING <ls_ekbe>
                           WHERE bewtp = 'R' OR bewtp = 'Q'
                            AND budat IN s_date.
      MOVE-CORRESPONDING <ls_ekbe> TO wa_ekbe.
      APPEND wa_ekbe TO it_ekbe.
      MOVE-CORRESPONDING <ls_ekbe> TO wa_ekbee.
      APPEND wa_ekbee TO it_ekbee.
      CLEAR wa_ekbe.
      CLEAR wa_ekbee.
    ENDLOOP.
ENDDO.
CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
    EXPORTING
      archive_handle = lv_handle.
CLEAR wa_arcindx1a.
ENDLOOP.
Like the above i diid for all tables wich are used in the Zreport.
Please tell me i am going in right direction or not. The above logic taking time because it is reding entire data in the table.
If new logic is there please provide me to improve performance of the zreport.
Regards,
Maruthi S

Hi Friends,
I am waiting for solution aobve.
Regards,
Maruthi. S

Best way to access Archive data

Hello,
I need to change few customized reports (z-reports) to make it fetch data from IXOS server.
This is done for SAP IS-H reports. So some of the tables for eg NBEW(movement table) will be archived and a correspoding
infostructre will be created acting as an indice to archive database.So my query is what is the correct approach to read the data from the IXOS server.
1. Query the infostructure . Change each select statement to make it read from the infostruture which points to IXOS
2. Directly read files using unix commands.
When we use option 1 or 2 what are the benefits ? which is better?
Some times may need to query both sap databse and IXOS, if the date range overlaps So what are the performance impacts.
Any ideas is highly appreciated.
Thank you.
Regards,
Abhilash

Abhilash
I would suggest to use the option 1, to query the infostructure.
With this you can access the data fast as the system would've generated indexes with the archived data.
Directly querying unix files might not be that good, as you need to identify the proper indexes to fetch the data, whcih we might not do so accurately at times.
Thanks,
Naveen

Problem in Retrieval of archived data

I have archived data from DSO successfully but after sometime activation of new data records on that DSO got failed it was showing this error ' 176 records are locked by the archiving object '. To remove this activation error I deleted the archiving object of that DSO. And issue got resolved.
But now when I want to retrieve that archived data onto the copy of that DSO. DTP is not able to fetch any archived data records and get over with green status.
I also used SARA tcode to reload data onto the DSO for that I entered archiving object name but when i press Archive Selection tab its showing nothing to select.
Kindly help me with this issue.

Hello,
Correct me if i'm wrong with understanding, you want to retrieve the archive data but by running read program you are not able to display data from archive/file.
- Run the read program in batch mode not with option Dialog mode.
Reload will re-load the data back into your database tables. With reload option you are not getting archive session to select... If so then check your archive session status, if case archive session is incomplete then it will not appear.
-Thanks,
Ajay

Extract Archived data to BW

Hi Experts,
I am running BI 7.0, have PBS adds on connected to my ECC 6.0. My requirements are to extract some MM, FI as CO archived files to BW. I read the [http://www.pbs software.com/medien/whitepaper/PBS_Archive_Data_Extraction_from_ERP_Guidelines.pdf] but still unclear.
1/ For MM documents I am thinking to run the pbs extraction reports as /pbs/cmme_export for example
That report converts the archived files into text files then into Sap AIS format (all that happens behind the scene or should I need to intevene in somewhere?)
2/ for the FI and CO, I need to enabled the respective extractors datasources to fetch the archived files
Extracting data to psa in this case would happens in just 1 process(1 extract structure = online data + archived data) or 2 processes (1 extract structure(online data to psa) 1 extract structure(archived data))?
Does that have to be done sequentially on in parallel?

Hi,
Do you got any solution, how to extract R/3 archived data using 0FI_AR_4 in BI. Please Share with us.
Regards,
Giri

Archiving data in ods

Hello out there
In our company we ara going to archive transactional data for the first time
I am going to create several ods:es . In those i am going to transfer data before archiving in r3.
Now my question. I will set a flag somewhere and if this is set i will be impossible to delete the data in the ods via rsa1 transaction
I hope this is possible but dont know how to do.
/7 Stisse

Hi dear and welcome on board!
Is your doubt related to some possible authorization settings in order to avoid potential (undesired) deletions of this data ?
I think you can move these ODSs in a dedicated Infoarea and then avoid to assign access into it to anyone...
Otherwise, you can archive data in BW too !
Let me know your specific requirements (do you have to do some reporting on this archived data ?)...
Bye,
Roberto

Not able to fetch the data by Virtual Cube

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Reg: fetch the data by using item_id which is retuned by In line View Query

Hi all,
create table xxc_transactions(type_id number,trx_line_id number ,item_id number,org_id number);
insert into xxc_transactions values(null,null,null,null);
create table xxc_items1(item_id number,org_id number,item_no varchar2(10));
insert into xxc_items1 values(123,12,'book');
create table xxc_headers(header_id number,order_id number);
insert into xxc_headers values(null,null);
create table xxc_lines(header_id number,item_id number,line_id number);
insert into xxc_lines values(null,null,null);
create table xxc_types_tl(transaction_id number,NAME varchar2(10));
insert into xxc_types_tl values(106,'abc');
create table xxc_quantity(item_id number);
insert into xxc_quantity values (123);
create table xxc_quantity_1(item_id number);
insert into xxc_quantity_1 values (123);
SELECT union_id.item_id,
       b.org_id,
       e.name,
       fun1(union_id.item_id) item_no
FROM   xxc_transactions a,
       xxc_items1 b,
       xxc_headers c,
       xxc_lines d,
       xxc_types_tl e,
       (SELECT item_id
        FROM   xxc_quantity
        WHERE item_id = 123
        UNION
        SELECT item_id
        FROM   xxc_quantity_1
        WHERE item_id = 123
        UNION
        SELECT item_id
        FROM   xxc_transactions
        WHERE item_id = 123) union_id
WHERE a.type_id = 6
       AND a.item_id = b.item_id
       AND union_id.item_id = b.item_id
       AND a.org_id = b.org_id
       AND c.header_id = d.header_id
       AND d.line_id = a.trx_line_id
       AND d.item_id = b.item_id
       AND c.order_id = e.transaction_id
       AND b.org_id = 12
GROUP BY union_id.item_id,
          b.org_id,
          e.name
ORDER BY union_id.item_id;
create or replace function fun1(v_item in number)
return varchar2
is
v_item_no
Begin
   select item_no from xxc_items1
   where item_id=v_item;
   return v_item_no ;
    Exception
     When Others Then
      v_item_no := null;
      return v_item_no;
END fun1;
I need fetch the data by using item_id which is retuned by In line View Query(UNION)
item_id org_id name item_no
123        12        abc       book
Version: 11.1.0.7.0 and 11.2.0.1.0
Message was edited by: Rajesh123 Added test cases script
Message was edited by: Rajesh123 changed Question as fetch the data by using item_id which is retuned by In line View Query(UNION)

Hi Master , sorry for the late reply and can you please help on this?
create table xxc_transactions(type_id number,trx_line_id number ,item_id number,org_id number);
insert into xxc_transactions values(null,null,null,null);
create table xxc_items(item_id number,org_id number,item_no varchar2(10));
insert into xxc_items values(123,12,'book');
create table xxc_headers(header_id number,order_id number);
insert into xxc_headers values(null,null);
create table xxc_lines(header_id number,item_id number,line_id number);
insert into xxc_lines values(null,null,null);
create table xxc_types_tl(transaction_id number,NAME varchar2(10));
insert into xxc_types_tl values(106,'abc');
create table xxc_uinon_table(item_id number);
insert into xxc_types_tl values(123);
SELECT   union_id.item_id,
         b.org_id ,
         e.name ,
         fun1(union_id.item_id) item_no   --> to get item_no
         FORM xxc_transactions a,
         xxc_items             b,
         xxc_headers           c,
         xxc_lines             d,
         xxc_types_tl          e,
         ( SELECT item_id
             FROM   xxc_uinon_table ) union_id
WHERE    a.type_id= 6
AND      a.item_id = b.item_id
AND      union_id.item_id = b.item_id
AND      a.org_id = b.org_id
AND      c.header_id = d.header_id
AND      d.line_id= a.trx_line_id
AND      d.item_id= b.item_id
AND      c.order_id= e.transaction_id ---106
AND      b.org_id = 12
GROUP BY union_id.item_id,
         b.org_id ,
         e.name
ORDER BY union_id.item_id;
Note: xxc_uinon_table is a combination of UNION's
select 1 from dual
union
select 1 from dual
union
select no rows returned from dual;
I will get 1 from the above Query
Thank you in advanced

Error when Fetching CATs Data to BI

Hi,
I have created data source in R/3 System (Source System) for CATS data and extracting data Using function Module. Using transaction RSA3 it is fetching all the desired records in R/3 System.
In BI System extracting Full Data and when monitoring it is throwing Error.
Error 7 when sending an IDoc
Error when opening an RFC connection    2
Error when opening an RFC connection
Errors in source system
Function Module for fetching CATS Data
FUNCTION ZLBTIME_GET_CATSREC.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZLSCATS OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
* Example: DataSource for table SFLIGHT
* TABLES: SFLIGHT.
* Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
* Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
* counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
* cursor
          S_CURSOR TYPE CURSOR.
* Select ranges
** RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
**          L_R_CONNID FOR SFLIGHT-CONNID.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
* Initialization: check input parameters
*                 buffer input parameters
*                 prepare data selection
* Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZLTIME_DS_3'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
* this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
* Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
* Fill field list table for an optimized select statement
* (in case that there is no 1:1 relation between InfoSource fields
* and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
* Data transfer: First Call      OPEN CURSOR + FETCH
*                Following Calls FETCH only
* First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
* Fill range tables BW will only pass down simple selection criteria
* of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
**        APPEND L_R_CARRID.
**      ENDLOOP.
**      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
**        MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
**        APPEND L_R_CONNID.
**      ENDLOOP.
* Determine number of database records to be read per FETCH statement
* from input parameter I_MAXSIZE. If there is a one to one relation
* between DataSource table lines and database entries, this is trivial.
* In other cases, it may be impossible and some estimated value has to
* be determined.
**      OPEN CURSOR WITH HOLD S_CURSOR FOR
**      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
**                               WHERE CARRID IN L_R_CARRID AND
**                                     CONNID IN L_R_CONNID.
        OPEN CURSOR WITH HOLD s_cursor FOR
*        SELECT * FROM zlvctmbw.
        SELECT a~counter a~pernr a~workdate a~skostl a~lstar a~rproj a~awart a~kokrs a~meinh a~tcurr a~price
               a~unit a~bukrs a~ersda a~erstm a~ernam a~laeda a~laetm a~status a~refcounter a~reason a~belnr
               a~catshours a~act1 a~act2 a~task a~lang1 a~narr1 a~lang2 a~narr2 a~cmnt a~clst a~plchl
               b~ltxa1 b~transfer b~hrkostl b~hrlstar b~hrcostasg b~statkeyfig b~catsquantity b~bemot
               c~pspnr c~pspid
               d~kunnr
        FROM   catsdb AS a
        LEFT OUTER JOIN catsco AS b ON a~counter = b~counter
        JOIN   prps AS p ON p~pspnr = a~rproj
        JOIN   proj AS c ON c~pspnr = p~psphi
        JOIN   zltproj AS d ON d~pspnr = c~pspnr.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
When fetching data using VIEW in source system it works fine.
When testing for fetching data of SFLIGHT using function module ZRSAX_BIW_GET_DATA_SIMPLE
made a copy of RSAX_BIW_GET_DATA_SIMPLE, it is working fine.
Pls suggest the cause of error.
Regards
Vishal

Hello Praveen,
Connection is fine as I tried fetching data of SFLIGHT using standard template function module which works fine and in transaction sm58 I do not any data.
Regards
Vishal

URGENT!!!! - Reading Archived Data from a Report.

Hi,
The data, prior to 15 months, of some tables (BSEG, BSAK),
used in the report YGF11347 has been archived.
Previously this report YGF11347 was run for vendor payment information for any time frame
through FBL1N. So any vendor line items from 2004, 2005, 2006 and current year,
all data elements were available to be extracted and displayed on the report.
Recently the Check Amount is missing when executing the report for payments made prior to
04/01/2006. This is because of archiving the data prior to 15 months.
My requirement is tht i need to display this archived data also in the report "YGF11347".
Can anyone please help me on this issue.
Regards,
Akrati

hi
good
check this link, hope this would help you to solve your problem.
http://www.ams.utoronto.ca/Assets/output/assets/ixos_637070.pdf.pdf
thanks
mrutyun^

Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi

I researched this error in forum ,however, I don't reach the solutions.
Error -1074118610 occurred at niUSRP Fetch Rx Data (CDB Cluster).vi
The received data is out of sequence. This may be a symptom of overflows due to an inability to maintain streaming at the specified IQ Rate, or rearrangement of packets by an ethernet adapter or network switch.
When I start to USRP, I am taking this error 6-7 minutes later. I tried IQ Rate= 2M and samples per symbol=4 also IQ Rate is approximately 192k and samples per symbol= 20 for 9600 baud rate.

Hello ITUbahadir
I understand you are NOT testing a LabVIEW shipping example. If this is correct, Could you try to test the shipping examples? Same error? If this is incorrect, what is the name of the example?
If the problem is specific to your code, could you share it? If you are not able to do that, could you explain me what have you changed to the code?
Regards
Frank R.

Changing the default to location of Archiver data

Hi,
Is there any way that we can change the default location of the Archiver data. By default is goes to archives folder, i want it to goto some other folder.
Similarly when u take up the backup of site. i want it also to be stored in some other folder.
is it possible.???

For archiver see My Oracle Support Note
How can I move the archive directory? (Doc ID 449054.1)
Not sure what you mean by a back up. There is no built in Disaster recovery tool for UCM. Standard system back ups (file system and DB) for restore should be used.

To fetch archived data

Similar Messages

Maybe you are looking for