To fetch details of services deployed and their version number

We have an EM environment where in we have deployed composite applications. We have several partitions running with number of services deployed in them. We want to fetch the details of the services deployed and their versions in each partition from a file if it stored in a file or from a table if it is stored in table. We are not sure if these details are stored in a file or table. Instead of fetching manually from console everytime, We want it be retrieved in a file or table which will help us control versions of services deployed. Please help regarding this.

Using ant -f ant-sca-mgmt.xml listCompositesInPartition, We can get the details of the composites deployed in a particular partition.

Similar Messages

Interesting Document: Service Deployment and Service Configuration within the Internet of Things

Hi All,
an interesting document:
Service Deployment and Service Configuration within the Internet of Things
Best regards,
Andy.

Hello Marek,
I suppose you are not planning to do any kinds of advanced config using several VLANs and multiple SSIDs so let's just make your configuration simple and working.
In short, you need to remove all references to VLAN 1 and to any subinterfaces possibly related to the VLAN 1. This means in particular (follow these steps in sequence):
Remove the Dot11Radio0.1 subinterface entirely
In the Dot11Radio0 section, remove the encryption vlan 1 mode ciphers tkip command
In the dot11 ssid ciscowifi section, remove the vlan 1 command
After performing these steps, make sure that the ssid ciscowifi and encryption mode commands are still present in the Dot11Radio0 configuration, and if not, reenter them.
Best regards,
Peter

Moving masters and their versions between libraries?

Is it possible to move masters and their versions between libraries?

the best and easiest way (that i have found) is to create a new project and put the masters and versions in there ... use export project to "extract" and then import the project in the different library ...
this is if you only want to move one or two masters/versions, if you want the whole project disregard creating the new one and moving images ...

Time_building_block_id and object version number

Hello,
could someone help me out with an explanation how the time_building_block_id and object version number to be interpreted?
Are these independent? What actions create new ID and new ovn?
My first idea was that one ID can have different instances in the table with different object version numbers. However I found cases belonging to the same parent buildingblock where both the id and ovn are different.
So based on this only one of the columns could be primary.
However for the joins both are used typically at the same time, suggesting that the two together constitutes a primary key.
Are the DETAIL level records belonding to the same DAY level record to be treated as co-existing entries and their measure to be summarized? Or only the latest (bigger ovn?) to be considered, so it is an updated version of the record with the previous ovn?
thanks!

The version number in the TC Building blocks is used to identify changes to timecard building blocks. It is not the same as an object version number on a record in a table.
OTL keeps an audit history of all changes to the timecard, at whatever level they occur. It uses this in retropay processes to identify the 'true' hours to use.
TC Building blocks have a 'scope', for example there are building blocks at these levels:
Timecard
Period / Application
Day
Detail
If you entered 8 hours on a new timecard for Monday 07/09/09 it would create a building block record for that date and call it version 1.
If you later make a change to that DAY, OTL will create a new record with version 2. Say this one shows 7 hours.
OTL can then interpret this as -8 + 7 = -1 and make the appropriate adjustment.
Hope that helps explain it!
Regards
Tim

Those that have successfully downloaded mac lion please write the md5, sha1, exact file size and the version number, please.

those that have successfully downloaded mac lion please write the md5, sha1, exact file size and the version number, please.

This is how, for instance, on a flsh drive:
http://lifehacker.com/5823096/how-to-burn-your-own-lion-install-dvd-or-flash-dri ve

Questions in regards to server 2012R2 Remote desktop Service deployment and GPO

Hi Everyone
We have a business requirement moving to 2012R2 RDSH server. I have installed a 2012R2 member servers and enabled Remote desktop licensing role. I have activated the licenses. the servers is in operational
I have deployed 3 windows 2012R2 member server "RDS1" , "RDS2" and "RDS3".
on RDS1 I ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
On RDS1 Server Manage Dashboard Page Select Remote Desktop Services > Overview. Under RD Licensing I added my 2012R2 license server "2012r2-tslic". Go to task. Edit deployment properties RD license mode to per device and click OK.
Reboot RDS1
Check RD Licensing Diagnoser everything is clear
On RDS2 I did the exact same thing ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
But With RDS2 I move this server to an OU that link to a GPO with RD licensing details. after reboot the servers check RD Licensing Diagnoser I can see 2012r2-tslic specified as the license servers.
Based on this document
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx Are you suppose to configure RD license server via Remote desktop Service deployment ? Not GPO ?
Here are my questions
We currently have ten 2008r2 terminal servers in a NLB cluster. each RDSH server have in house application installed on each one of them. User connect to the 2008R2 RDSH servers via RDP connection. we have a restricted GPO apply to those
RDSH servers. user cannot do anything on RDSH servers apart from running the application and use excel. On the remote desktop session host configuration we have enable settings like end a disconnected session , Active session limit ,
remote control users session , LPT port redirection.
We push out RD license server detail via GPO to the terminal servers
Can I use our existing GPO apply the licensing server settings , desktop restriction setting to the 2012R2 RDHS servers or we should be using Remote desktop Service deployment to do the job ? If that is the case how would you transfer the
current 2008r2 environment to 2012 using Remote desktop Service deployment. is that mean I have to manually configure 1 by 1.
Please help
Many thanks

Hi,
Please see my response to you in the other thread. Please contact me via email and I will go over the basic planning and deployment steps with you which will help clear things up and get you started off on the right foot.
You should only run through the wizard and create a RDS deployment once. Then you add the various servers (RDSH, RD Licensing, RD Gateway, etc), set Deployment properties, etc.
Thanks.
-TP

Join a service call and one serial number?

In admin web tools
Can join a service call and one customer equipment card (serial number) ?

The company sells machines for industry.
Every machine and component has a serial number and u201Ccustomer equipment cardu201D in SBO.
Usually, If the customer has a problem call to company.
1.- SBO user get the u201Ccall serveru201D
2.- SBO user support join the u201Ccall serveru201D and u201Ccustomer equipment cardu201D
3.- SBO user go to call server create a Delivery (works and equipment)
Unfortunately the technical support, works in customer company and usually canu2019t entry to SBO in several days.
We like use the u201Cweb toolsu201D, the technical support uses the web and can see the u201Ccall serveru201D, the Customer and marketing documents.
But canu2019t assign a u201Ccustomer equipment cardu201D to u201Ccall serveru201D and synchronize to SAP and create a Delivery by WEB
Can you proposal a new work flow by web?
Muchas gracias.

Anyone from Canada and their Transit number worked?

I kept getting the error message when submitting, I was told by my bank (TD canada trust) that my transit number is the same as the branch ID (which is 5 digit). I also tried taking the last digit off and using the 4 digits only, also failed. Anyone got their transit number working?

I use the same bank. After talking with both the bank and Apple, I learned that I need to take the institution number (04 for TD) and add it to the front of the branch id (5 digits). I then needed to add an additional two zeros to the front for a total of nine digits. In summary the transit number was 0004<branch number>.

JSP and Servlet Version Number

Dear all:
Does any one know how to find out the version number of JSP and servlet. I am currently using IBM WSAD as development tools.
Thanks for your attention.

The web.xml would also help. Look at the dtd/schema definition in web.xml -
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
 PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
 "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>.....indicates servlet 2.3 specification (jsp 1.2, j2ee 1.3)
where as
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
 version="2.4">indicates servlet 2.4 spec (jsp 2.0, j2ee 1.4)
cheers,
ram.

Patch Set Updates and the version number

Oracle document 854428.1, Patch Set Updates (PSUs) for Oracle Products, has this to say about the version number:
2.3 Baseline Version for Easier Tracking
Oracle associates a version number to the patch. The fifth number of the database version is incremented for each PSU. For example, the initial PSU is version 11.1.0.7.1, the second PSU for Release 11.1.0.7 is 11.1.0.7.2, and so on.
My DBAs just told me that they applied PSU3 to our database, which had version number 11.2.0.2.0. I checked the version number after the PSU was applied, but it is still the same:
SQL> select version from v$instance;
VERSION
11.2.0.2.0
Do the PSUs change the fifth number in the version or not?

SQL> select comments from sys.registry$history where action_time > sysdate - 1
COMMENTS
PSU 11.2.0.2.3
Thankyou, that answers my question. The fifth number in the version column of the v$instance view does not seem to change when a PSU is applied. However, the sys.registry$history view has a record of the PSU with the correct fifth number in the version.

Flex Data Service : deployment and reusage

I am currently trying out different deployment methods to
deploy the flex.war on JBoss.
So far the WAR-file itself and any other EAR/WAR that
contains the contents of flex.war run properly.
However as far as I understood this file is merely a template
for your web application, meaning that I would have to include 10
MB of jars and several config files in every web application that
uses flex.
I want to know if there is a more scalable solution.
I already tried to put most of the jars in the shared library
folder of my container but then it throw ClassNotFoundExceptions
from classes that are in the shared lib and since there is no clear
document on what jar files are needed to run FDS and which ones can
be left out, it is a little cumbersome to add the whole chunk for
every web app.

u can flex folder in flex.war
sun

Need 50AX60 service manual and/or file number

I am trying to repair a old school Toshiba 50AX60 rear projection TV. I need the file number for the service manual so I can search for a free download online. Can anyone help me?
THX
Mike

The manual was very helpful. I used the procedure I found there. When I got to step 5 where you check the PSU fans, I see that they try to spin up when the power button is pushed. They don't even get a full rotation before they stop. I guess this means that the PSU has some problems. Up until step 5 the voltages where correct, so I guess just checking one or two voltages does not tell the full story.
I noticed that the pinouts posted here
http://www.outofspec.com/frankenmac/wire.shtml
did not match the manual. They are the mirror image (up/down) from the manual. The manual matched my pinouts. Also where it says 28v on the frankenmac diagram, it is 25v in the manual.
New PSU units cost $340+, from what I see. The computer is not worth much more than that. I think I will put my money towards a new Core I7 Mac tower, when they come out. I should be able to move the hard drive over. Hopefully the new towers will handle the old hard drives. In the mean time my gaming PC will have to do double duty.

I have upgraded to 8.0 and the version number comes up correct except in most sites it says I'm running 3.5.6?? I have continually upgraded and don't know how to make websites see the upgrade.

Everytime there is an upgrade I install it. My browser says I'm using 8.0 and that my browser is up-to-date. However, when I try to install Firebug for 8.0 or any other add on it says I'm using 3.5.6. Even gmail is saying that my browser is out dated! How can I get my browser to be truly updated??

Your UserAgent string in Firefox is messed up by another program that you installed. 
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter 
''If you see the warning, you can confirm that you want to access that page.'' 
Filter = '''general.useragent.''' 
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. 
Then restart Firefox

E-Recruiting Users and their Service Assignments

Hello all,
I am running EREC 604 SP11 (Ehp4), with ECC 6.0 SPS5, TREX 7.1rev39, Portal 7.01.
My scenario is EREC+ECC one box, Portal seperate and TREX seperate. I've got everything set up for WebDynpro (as required with this release) and am having some trouble accessing certain web dynpro links, I think my problem is an early eRecruiting step of defining service users and their assignments to eRecruiting / web dynpro services in SICF.
Can anyone provide me with a list/table of service/reference users that need to be created, their attached roles, and which services they each need to be assigned to? I've looked all over and cannot glean this type of simple documentation.
Thank you very much for your time!

Hello,
The reference users and the respective roles would be;
Reference User / Standard SAP E-Rec Role /      Role name
RCF_ADMIN               /         SAP_RCF_BUSINESS_ADMINISTRATOR      / Administrator
RCF_CAND_EXT / SAP_RCF_EXTERNAL_CANDIDATE      / External Candidate
RCF_CAND_INT /      SAP_RCF_INTERNAL_CANDIDATE      / Internal Candidate
RCF_DATA_TYP /      SAP_RCF_DATA_TYPIST                           / Data Entry Clerk
RCF_DECISION /      SAP_RCF_DECISION_MAKER      / Decision Maker
RCF_MANAGER /      SAP_RCF_MANAGER                           / Manager
RCF_MGRASS /      SAP_RCF_MANAGER_ASSISTANT      / Manager's Assistant
RCF_RECRUIT /      SAP_RCF_RECRUITER                           / Recruiter
RCF_REQUEST /      SAP_RCF_REQUISITION_REQUESTER      / Requester
RCF_RES_REC /      SAP_RCF_RESTRICTED_RECRUITER      / Restricted Recruiter
RCF_RES_SUCC /      SAP_RCF_REST_SUCCESSIONPLANNER / Restricted Succession Planner
RCF_SUCC_PL /      SAP_RCF_SUCCESSION_PLANNER     / Succession Planner
RCF_TC /                           SAP_RCF_TALENT_CONSULTANT      / Talent Consultant
The service user with the role and relevant services would be
Service user / Std. E-rec Role / Role name
RCF_UREG_CAND(*)      / SAP_RCF_UNREGISTERED_CANDIDATE /      UnRegistered Candidate
(*) - The naming convention as required
Required services;
hrrcf_a_unreg_job_search
hrrcf_a_candidate_registration
HRRCF_A_POSTING_APPLY
Service user is key for Un-registered candidates till the registration process is complete. I'm not sure if i had missed out any specific services with respect to Unregistered candidates. If so, probably some one else can add to the list.
Best Regards
G Raj

Changing details in Service PO

In a Service PO, the problem I am facing is that entering in Purchase Order "Item Category in Purchasing Document" (column I) the value D (services) automatically declares the unit in terms of AU (Activity Unit). Hence, when I go for the output (print preview) it gives a weird Quantity of 1 AU no matter the service was measured in terms of, fee charged per liter or per tank or per day etc. This obviously is not good but my supervisor thinks it is a lot of work.
If I want the quantity to appear as it appears in the Service Item, all I need to do is get the unit from that field right? Hence the form only requires changing of field from qty in the header to the qty in the item?
Replacing MEPO1211-EPSTP with ESLL-MEINS in however the code for forms (i.e. output for print) is written should do the trick right? I want to be sure about the way to go about it to discuss this with my supervisor.

I just want to justify the logic why system picks AU for service items.
two ways you can procure the service.
- for short term services, we create account assigned PO with short text.
- for long term services, we create service master and also we want to track the service completion with SES.
Having said this... for service PO with item category D, in the line item we dont enter any material and we just enter short description with account assignment. so it means we are not entering exact service details in the line item. We enter the exact service details in service tab and moreover a single service can have multiple services clubbed. for ex. you are creating a service PO for lunch bouffet party. You want to categorise this service into specific services..
- food - 100 EA
- drinks - 20 Litres
- waiter service - 5 man hours
In the above example, you create PO and mention short description as New year lunch party with UOM AU. and in the service tab you mention all the three services with three different UOM. So if system allows you to change the UOM in line item, you can't have different UOM in service line items. Hence I think system is using generic UOM.
So you need to change your smartform logic to fetch the UOM from service tab and not in item tab.

To fetch details of services deployed and their version number

Similar Messages

Maybe you are looking for