To fetch property phy. n chemical properties details as entered in cg02 in program

Hello all,
I have a requirement regarding the WWI msds report data sheets.
I need to pick the value for pH entered for the property physical and chemical properties while creating report sheet in cg02 and use it in a program.
Can anyone please tell me from where can i fetch this details?
I looked in various tables related to EHS but couldn't locate for this data.
There might be some table or structure where this entered data must be getting stored and from where i can pick it up right?
Your inputs will be of great help,
Thanks.

Hi,
Refer the following SCN threads. It might help you.
How to read sort sequence and other properties of a specification in Cg02 .
Capture EHS Data in ABAP Report

Similar Messages

  • Maximum record fetched  property of block

    hi friends
    i have a basetable block
    and i set the maximum record fetched property for this block to 1
    but when i execute_query
    i see all records.
    can any one help me?
    and i set this property ---> query array size
    but it doesnot work also!!!!
    tahnks
    regards,
    shoja

    This property takes effect when the Query All Records property is set to true - and you may have to set the interaction mdoe to Non-blocking at Form mode.
    A Simpler way to limit the number of rows would simply be to add
    where rownum < 2 to the where clause for the block.

  • Add OWN property to the weblogic.properties

    Hi.
    I tried to add my own property to the weblogic.properties.
    ERROR: "Found undeclared property"
    Is it at all possible?
    TIA,

    If you simply want to define a Java System property, you can do that
    like so:
    java.system.property.my.property=foo
    This has the same effect as using the -Dmy.property=foo argument to the
    JVM and is retrievable programmatically by calling
    System.getProperty("my.property")
    Hope this helps,
    Robert
    Daniel Ilkanayev wrote:
    Hi.
    I tried to add my own property to the weblogic.properties.
    ERROR: "Found undeclared property"
    Is it at all possible?
    TIA,

  • Import JPG Properties Details into Photoshop

    I have thousands of jpg photos that have the photograph's description documented in the jpg properties - details - comments field (right click the jpg file and select properties, then details, then comments). How do now edit / view these jpg properties within Photshop Elements 9?

    It should see them on a simple "sync" of the folder in Lightroom. Perhaps you still have "Treat JPEG files next to raw files as separate photos" unchecked in your preferences (the general tab).
    Also, it is far simpler to simply export directly to JPEG from the PSD files in Lightroom. It will do all those things (flattening, shrinking, sharpening, etc.) for you in one step

  • Whenever I try to get orange emails I getSorry, the details you entered weren't

    Sorry, the details you entered weren't recognised. Please try again, definitely noerrors in user name or password , even tried resetting password to a new one but still doesn't work

    What is the domain of your email?

  • I created an apple id with credentials from my credit card... after the details were entered, a transaction of rs 60 was shown on my credit card.. does apple charge to create and apple account

    I created an apple id with credentials from my credit card... after the details were entered, a transaction of rs 60 was shown on my credit card.. does apple charge to create and apple account

    schunfraulin wrote:
    ... does apple charge to create and apple account
    No.
    But it might be this  >  http://support.apple.com/kb/HT3702

  • Property inspector not displaying properties

    Trivial problem: DAK why DW8 (8.0.2) Property inspector
    sometimes displays just "Div ID, Class and an Edit CSS button" when
    within a DIV? When in Code view in a correctly functioning
    page, most of the code will have detailed HTML properties displayed
    as usual. But in one section - which has multiple nested DIVs with
    some other HTML inside, Property inspector displays only the DIV
    details instead of the other HTML details - as if it were still
    inspecting the DIV tag itself instead of being within the DIV?
    The page validates with no errors and the DIVs are closed
    with </div> in the right places.

    Yes, me too. I can't find an answer to this anywhere.
    If I right-click or double-click on an item the property
    inspector shows it, but if I single click, nothing happens. It's
    bad for productivity.

  • Fetching workflow status from Extended Properties in SharePoint 2013 sequential workflow (Farm solutions) option

    HI,
    I am using VS 2012, I have selected the option "sharepoint sequential workflow (Farm solution) option and not the workflow App model.
    Earlier in SharePoint 2010, the approver status column can be got from ExtendedProperties["TaskStatus"] and which contained either "#" or "@" as its value.
    However, in SharePoint 2013, the ExtendedProperties does not contain the "TaskStatus" key. In the quickwatch, i was able to see the value as "#" associated to some guid key. In the debug mode,i can see the below:
    (new System.Collections.Hashtable.HashtableDebugView(TaskPropertiesForManagerAfter.ExtendedProperties)).Items[12]
    But I’m not sure how to get to it from the code?
    How to retrieve the Task Status using ExtendedProperties in SharePoint 2013?
    Thanks

    Having problems getting SPD 2013 installed on my laptop because of a trial of O365, but I know in SPD 2010 you could find the BCC fields, etc... in the Advanced properties, it wasn't directly available via the common interface.  I know 2013 is very
    different from 2010, and if I can get it to install correctly, I will update, but look for an advanced property, or an XML view where you can find the FROM: field.

  • Fetching property value in script logic!!

    Hello Experts,
    We are using BPC 7.5 M, I am working on a script logic and need to fetch a value of a property of a dimension member where dimension member is itself defined in some property.
    We have a Org dimension which has a property "FORECAST_UNIT" and this property contains a member Id of Org dimension itself, In my script logic I need to fetch value of "Currency" property for the Org dimension member defined in "FORECAST_UNIT" property.
    Please Advice.
    Thanks & Regards,
    Rohit

    Hi Roberto,
    Attached code (In Image) is of our Aggregate Forecast Unit logic, Every Org (Entity) has an forecasting unit defined in Forecasting unit property in Org dimension and Forecasting unit is also a member of Org dimension, below logic aggregates the data at Forecasting unit level:
    The issue is that I need to check before the code marked in Red executes that if Org-- Forecasting unit -- Currency is USD then only Red part of logic should execute.
    Thanks & Regards,
    Rohit

  • Property missing in Node Properties tab

    Hi,
    I have created a Boolean Local Node property 'DoNotModify' with default value 'FALSE' and assigned it to a Property Category 'Accounts', but when i open the hierarchy and check the node properties in the 'Accounts' category the property is not showing up. I then wrote a property query on the same property and this is returning all the nodes in the hierarchy. So this means that the property has been created correctly, but why am i not able to see it in the Node Properties tab?? Please help. I am working in version 11.1.2.1.
    Thanks,
    Krishna
    Edited by: 903463 on Jun 24, 2012 11:45 PM

    Krishna,
    You need to assign the new property to an appropriate node type of the hierarchy else you will not be able to view the properties.
    If you still want to validate, click "Show all properties". This will available in later patches of 11.1.2.1. Not sure whih patch are you in of 11.1.2.1

  • Rule File Consoldation Properties Detail

    I have two questions, I need to review all my post becasue i have asked this question before but can not find the details needed!!!!!
    so
    I have a BSO cube and in the Consolidation properties it is "~" in the load rule but i need to make all ~ Label only
    Please advise

    OK
    well try this
    I have a BSO cube that has 1444 ~ within one Dimension , I want to changes these ~ to Label Only, i changed the dim build file from ~ to O
    and I am now getting a error
    Object [BlueBook] is locked by user [admin@Native Directory]
    Dimension build failed. Error code [1060053]. Check the server log file and the dimension build error file for possible additional info.
    Unexpected Essbase error 1007083
    Object [BlueBook] unlocked by user [admin@Native Directory]
    but the file run fine when the member properties is ~
    Error 1060000-1060999 Outline API ??????
    trying to check the logs ??
    HUMMMMMM
    Edited by: Next Level on Aug 29, 2012 11:32 AM

  • PAAPINVW -- how to fetch values for invoice line level details

    My requirement is such that we define one of our account segments at invoice line dff's while creating the invoice against a project. So the ccid would need to driven from this invoice line dff, to be complete and valid.
    Project Supplier Invoice Account Generator (PAAPINVW) has already defined attributes for Invoice Header DFF's and Invoice Distribution level DFF's; but Invoice line level DFF's have not been defined.
    Also there are no attributes that would help me query the invoice line to fetch these details.
    Working on this workflow in R12. Has anyone tried to fetch any sort of details from invoice lines, using any existing attributes in PAAPINVW; or has anyone done something in accordance to this??
    Looking for suggestions.. have anyone faced a similar situation before??

    Hi user;
    Pelase check below note cause and solution part please,which at least can gives u some ideas
    Projects Supplier Invoice Account Generation Error: APP-SQLAP-97734: The System Cannot Generate Distributions [ID 823787.1]Regard
    Regard
    Helios

  • [HELP] Error, Unknown variable or property name '', error. No Details???

    Our production team ran some of our TestStand software when it froze.  Upon exiting the report file contained only one error:
    “Error, Unknown variable or property name ''. [Error Code: -17306, Unknown variable or property name.]”
    This has not happened before with this test sequence.
    Now I have seen this before, during development of other TestStand projects, but there are usually details of the unknown variable in the error.  This one just has empty quotes!  There are around twenty sequences called in this software.  Is this a rouge error, a symptom of the freeze, or do we have an unknown variable issue in these sequences?
    Christopher Povey
    Senior Test Systems Engineer for BAE Systems.

    Hi Christopher,
    As you say as part of the Error Message you should of had the Variable name.
    With this freeze and if you had to force exit of the TestStand, it would seem that to get any report at all you must be doing some sort of 'On the Fly' reporting. If so, can you pin point what the test sequence was doing to try to identify the cause of the freeze.
    Maybe you are obtaining the variable name dynamically and because of the crash this value was not obtained and therefore you were passing an empty string. Hence no variable name in error message.
    Regards
    Ray Farmer

  • CSS property Inspector shows no properties when inspecting .php file

    Hello,
    i`m trying to use the new Dreamweaver CS5 ability to inspect files from my joomla CMS. The site is working, has a testing server and i can browse through the site in Live View mode. Also splitscreen with Liva Data and Live View mode is working fine. But when pressing the inspect-button, the single elements are shown in Live View mode (with all the colored padding and margin boxes around each element) but there are NO CSS-properties shown in the CSS properties inspector except for one inline-style: font-size: 100% which one can see as a body-property in live data view.
    Is there a error in configuring Dreamweaver or is this problem caused by joomla? There is a video at Adobe-TV in which Dreamweaver manages Wordpress files and works just fine.
    Help would be great!
    Dennis

    Hello Hans-G,
    its not yet published. But i can give you all infos about version and stuff:
    Einstellung Wert
    PHP erstellt für:
    SunOS localhost 5.10 Generic_139556-08 i86pc
    Datenbankversion:
    5.0.91-log
    Datenbankzeichensatz:
    utf8_general_ci
    PHP-Version:
    5.2.14
    Webserver:
    Apache/2.2.17 (Unix)
    PHP-Anbindung zum Webserver:
    cgi
    Joomla!-Version:
    Joomla! 1.5.22 Stable [ senu takaa ama woi ] 04-November-2010 18:00 GMT
    Browserkennung:
    Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12 GTB7.1
    Dennis

  • Click the add property link in the properties panel ?

    hi, iam in the css styles panel in the properties section, but i can't find the add properties link ? please help

    Hello,
    do you think about this from this forum: Styles panel missing in Dreamweaver cs6 (Was: Dreamweaver CS6)
    http://forums.adobe.com/thread/1423845 with Jon's answer (it's really working! ):
    If you are using DWCC (check under Help > About Dreamweaver to verify your version) and don't like the CSS Designer, you can get the old CSS style panel back by hitting Control + Alt (Command) + Shift +P
    Hans-Günter

Maybe you are looking for