To find error message in the standard program sapmv45a

Hi friends,
I have a following senario.
Iam getting the following error mesage.
INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '00000678' DOES NOT EXIST.
now my requirment is i should find from were this error message is being triggered.
actualy my problem is its in production server i dont have the acess to debug it.
even i dont have the mesage classs and mesage number also.
How can i catch this error mesasge from the program code
ie :  by checking the code of the program SAPMV45A
Regards
Priyanka.

I got that mesage from ME13 tcode.
now my requirement is
in the line item i have material number '000000678'.
now the end user is chaning tht material number ie : he is chaning from '000000678' to ' 000000600'.
now for the ist material 000000678' the info record is maintained .
but for the changed material  000000600' the info record is not maintained. so iam getting the error mesage as below.
INFO RECORD FOR VENDOR 'ABC' AND MATERIAL '000000600' DOES NOT EXIST.
Now my reuiremnt is i should skip this error mesage even when the material is changed ( ie if the info record is not maintained )  .
ie :  it sholud allow me to process the flow of va01 tcode
How can i do that.
or is there any other solution for that.
Regards,
priyanka.

Similar Messages

  • Error While executing the Standard Program RSEINB00

    Hi,
    I am trying to execute the Standard Program RSEINB00.
    The input parameters for this program are
    1. File path along with name
    2. Port.
    File path I am giving the application server directory along with the filename.
    For port. i have created a port in WE21.
    For both outbound parametes I selected the Physical directory and gave directory name and file name in both tabs and saved the port definition.
    Now I am passing the port to the RSEINB00 program.
    it is giving an error File cannot be opened.
    Can any one help me on this. Can someone guide me how to use RSEINB00 to read file from application server.
    thanks

    Hi,
    I think,you missed out some steps while creating Port.so please follow the below steps to resolve the issue.
    we21->click on your port number->outbound file tab->function module: EDI_PATH_CREATE_MESTYP_DOCNUM.
    outbound file: give file name .txt.
    and give the physical directory : /usr/sap/.......................................txt and save.
    and click on 'ACESS TEST' button and check any error is coming.
    go to outbound trigger tab-> give RFC destination name which we have created under a port in SM59.
    and one more important thing is check your unicode status is active or not.
    .Please get back me .if any issues.
    Kiran J

  • Error while calling the standard Program

    Hi,
    I am using the Program <b>RMDATIND</b>, While executing the program ,I am getting an error as  <b>The field MARC-AUSDT is not ready for input and was therefore not transfered. </b>.  What exactly this means?
    the message type used is MG. I have tried to trace this Error, in the program, I am uable to get this. Please help me, to sort out this problem.
    Thanks
    Manju

    ThankQ solved

  • HipServ for STORA gives error Message that the Java plugin requires a newer version than 3.0. I have installed 4.0, so how come?

    HipServ for STORA by Netgear: when I start it there is an error message "The new JAVA plugin requires a Foxfire version 3 or later". the version of Foxfire I have installed is 4.0. I delete the error message and the HipServ program goes on and works perfectly. To whom should I direct my question, which is how to get rid of the error message? I can't seem to find any new driver for the STORA backup device (RAID 1 pair of 1 tByte drives on LAN)

    Hi rctbone,
    The problem is not with Firefox, but with the Java update. A solution can be found here: http://forum1.netgear.com/showthread.php?t=59935&highlight=java+plugin
    Cheers,
    Roby!

  • How to find the Standard Program associated with a Standard IDOC

    Hi,
          I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

    Hi,
    For outbound IDoc the program can be found:
    1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
    2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
    For Inbound IDoc the program can be found:
    Via WE42 where inbound process and its related inbound function module is maintained.
    In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
    For extending IDoc look at the following links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
    It can be summarized as follows:
    Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
    - Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
    - Click on Create new and enter a description and press enter.
    - Click on ZIDOCTYPE01 and then on the Create icon.
    - Enter ZIDOCTYPE as the segment type, click on Segment Editor.
    - Enter a description for your segment type and create.
    - Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
    - Save and generate, press back
    - To release the segment choose Goto, Release from the menu.
    - Check the box on the line of your segment.
    - Save, back and enter.
    - Your Idoc type structure should be displayed with your new segment.
    - Save and back.
    - To release the Idoc type choose Extras, Release type from the menu and Yes.
    Hope this helps.
    Regards,
    Gajendra.

  • Where can we find the standard program for scripts and smartform for vl02

    where can we find the standard program for scripts and smartform for vl02
    regard,
    anil

    If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
    the go to the related application Tcode
    (for sales order goto VA02 or VA03)
    (delivery -VL02N or VL03N)
    for Invoice VF02 or VF03
    for PO -goto ME9F
    enter doc number, Issue Output to -> screen/printer
    then see the output
    step 1 : copy the z layout into testing client thru SCC1.
    step2 : go to se71 and check modified layout.
    step3 : if it is under logistics.. go to TCODE "NACE".
    u will see various applictions for each business process.
    there u have configure ur related layout according to requirments,
    for example u consider for Request fo Quatation..
    there is APPLICATION called "EA"
    click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
    step 4 : goto tcode ME9A for requst for quatation(RFQ).
    step 5 : enter test data avalable and check it with message display.
    it is same for other applications like Contract agreament --> ME9k
    invoice --> vl02n
    and goes on..
    Reward points for useful Answers

  • Print a custom Error message in the XML bursting program's log file...

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

  • I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open.   How can I fix this?

    When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open.  How can I fix this issue?

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • All of a sudden my iTunes stopped working, and I get the following error messages:   1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem   and   2. iTunes was not installed correct

    All of a sudden my iTunes stopped working, and I get the following error messages:
    1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
    and
    2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
    Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
    This is not working. I've tried installing as Administrator but doesn't make any difference at all.
    There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
    Thanks

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99192)

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HT4623 I am confused.  I cannot get Gmail because  an error message says the password or id id wrong.  Also, I cannot find my iphone id.

    I am confused.  I cannot get Gmail because  an error message says the password or id id wrong.  Also, I cannot find my iphone id.
    <Personal Information Edited by Host>

    Friend,
    When you set a Gmail account you just need to enter your email account and password. It is impossible you enter the right information but it says "wrong". Double check it.
    If you mentioned "iPhone ID" as your Apple ID, you can find it going to Settings>> iCloud. Check if you already sign in to. If not, sign in with your Apple ID and password. If you haven't created one, you can do it there.
    Hop it will be helpful

  • Need to find the way to get the actual error message in the alert log.

    Hi,
    I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
    ============================
    Target Name=IDMPRD
    Target type=Database Instance
    Host=oidmprd01.ho.abc.com
    Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
    Message=1 distinct types of ORA- errors have been found in the alert log.
    Metric=Generic Alert Log Error Status
    Metric value=1
    Severity=Warning
    Acknowledged=No
    Notification Rule Name=RULE_4_PROD_DATABASES
    Notification Rule Owner=SYSMAN
    ============================
    Is there any way to get the complete error details in the OEM alert itself.
    Regards
    DBA.

    You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2

  • Calling the standard program in program and getting its output in int table

    Hi there,
    I have a requirement, where I need to call the standard program (of transaction CJI3) in my Y program. CJI3 transaction produces a ALV GRID output. I need to use that data for further processing. I am getting following problems:
    1. I tried to use SUBMIT ... EXPORTING TO MEMORY statement. I need to pass the company code for the selection, but the company code is in the dynamic selection. So not getting how to pass them.
    2. Just a doubt. Can we export the ALV GRID to the memory an retrieve it back using import?
    3. I did tried to use SUBMIT .....  statement using only the parameters which are on the selection screen. However the control went to CJI3 transaction and gave an error message 'Please select "from database" or "from archive" '. Did not understood that, any IDEA?
    Or is there any other way with which I can accomplish my requirement of getting the data in my program to manipulate, other than SUBMIT.
    Points will be rewarded.
    Thanks,
    Ganesh Khumse

    Hi,
    point 1:
    SUBMIT ... EXPORTING TO MEMORY will never work, because it displays the information in an ALV grid and that grid is waiting for user interaction for manipulating the information.
    point 2:
    no, you cannot export the content of an ALV grid to the memory
    point 3:
    must you get records in an internal table or must you feed the transaction, so that this one performs a task ??  for first option read below and for the other option you might work with BDC and Transaction Recorder.
    what you have to do is read the code of transaction CJI3 in order to understand what it does, where the information is read from and what is the internal table that passes the values to the ALV Grid. You might find a user exit in the code for manipulating that information or you might create an enhancement point if there´s no user exit.

Maybe you are looking for

  • Is there any way to prevent an ipad from using open wifi

    There are many open public wifi networks where my son can access inappropriate adult websites.  Is there a way to prevent him from using open public wifi networks. Dont they have restrictions so that people cannot access inappropriate material.?

  • How can I put subtitles to a movie, and in what language are they available?

    If I buy an american movie on the israeli store, can I turn on the english subtitles for it?

  • Cisco WLSE

    Hi, I am having problem configuring (managing) two devices with Cisco WLSE, after importing the file with AP IP address I get CDP Discovery completed, but I also get Number of devices (re)discovered 0. For all AP that I am able to configure(manage) I

  • How do I get it off "disk mode"??????

    I dont know what disk mode even is. I cant get to the menu it just pops up and says "ok to disconnect" when i plugged it into the USB instead of a red flashing circle...its black. and it still says "disk mode" at the top. im freaking out cause i cant

  • Permission to access preferences folders

    When I try to launch Id CC, I get a window that says that i do not have sufficient permission to access the preferences folders. Ensure that you have appropriate permissions and then restart. how do I impact this?