To find out the POSITION OF Nth OCCURANCE OF A PARTICULAR CHARACTER

Hi,
Is it possible to find out the POSITION OF Nth OCCURANCE OF A PARTICULAR CHARACTER IN A STRING in crystal reports?
Eg:
I have a string abcdabcdabcd
Now I want to know the position of the 2nd occurance of u2018au2019 in the string u2018abcdabcdabcdu2019

hi,
dim MainStr as String=u2018abcdabcdabcdu2019
dim SubStr as String='a' 'Give which alphabet do you want.
dim Num as integer=2 'Give which 'a' do you want. i gave for second a.
dim ResultStr as string
dim ResultNum as integer=1
dim Position as integer=0
for i as integer=0 to MainStr.length-1
ResultStr=MainStr.SubString(i,1)
if ResultStr=SubStr then
ResultNum+=1
if ResultNum=Num then
position=i+1
exitfor
endif
endif
next
hope this solves your problem
regards,
varma

Similar Messages

How to find out the position in which an application hangs

Hi,
is there any possibility to find out the position in a source, in which a deployed application hangs?
For example, there is an endless loop in an application, which is already deployed. In runtime the application hangs in this loop. How can I findout in which line the application hangs?
In other words, how can I see the stack of a certain process,for example, http_workerx?
Regards,
Ali
Message was edited by:
Ali Maraschi-Schouschtari

Hi Ali,
With SAP NetWeaver Composition Environment (CE) 7.1 SP3 it is very easy.
1.) Open the SAP Management Console
2.) Go to AS Java Threads tree node - you will see all the threads that are currently started on the system
3.) Check for threads that are colored in red - it takes about 30 sec the system to detect that an HTTP thread (http_workerx), as it is in your case, is hanging/executing endless loop.
4.) Right click on the hanging thread (colored in red) and pick 'Callstack' from the pop-up menu
5.) In the new window you will see the stack-trace showing what exactly this hanging thread is doing at the moment.
With the previous versions (or SPs) you need to apply a little bit more technical skills for the same result. (1) you need to do produce thread dump of the server that is suspected to have hanging thread and (2) to analyze this thread dump (check what the threads in Running state are doing). As it is in your case with the HTTP worker threads, their names are also printed in the thread dump, so you can focus only on them.

How to find out the list of field exists for a particular transaction

Hi all,
Can u please help me find out the list of field exits available for a particular Tcode?
Is it similar to User exit or . . . . ?
Thanks,
C.Selvaraj
SAP-QM

Create a program and add this code to find user exit
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
      select single * from tfdir where pname = tstc-pgmna.
      select single * from enlfdir where funcname =
      tfdir-funcname.
      select single * from tadir where pgmid = 'R3TR'
      and object = 'FUGR'
      and obj_name eq enlfdir-area.
      move : tadir-devclass to v_devclass.
    endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',                        "#EC NOTEXT
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',                                          "#EC NOTEXT
    21 sy-vline ,
    22 'Description',                                       "#EC NOTEXT
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
      select single * from modsapt
      where sprsl = sy-langu and
      name = jtab-obj_name.
      format color col_normal intensified off.
      write:/1 sy-vline,
      2 jtab-obj_name hotspot on,
      21 sy-vline ,
      22 modsapt-modtext,
      95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.                      "#EC NOTEXT
else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.                      "#EC NOTEXT
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.            "#EC NOTEXT
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Rewards if useful........................
Minal

How to find out the cost of SAP user for a particular user id

Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
Raghu

Hello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak

Finding out the last event that occurred?

Hello,
Would anyone know how I can find out programmtically what was the
last event that occurred? For example, I want to know if the
delete-record event has been generated (via user clicking on
delete record item). I tried the system variables but none seem
to do the trick.
Thank you,
Sam Al-Droubi
null

So you do have a column to sort by (I didn't mean that it had to be an inserted date,just that there had to be some column to sort by).
Using analytic functions (generally more efficient)
SELECT *
FROM (SELECT e.*, rank() over (order by empno asc) rnk
FROM emp e)
WHERE rnk = 1Using "old fashioned" SQL (generally less efficient)
SELECT *
FROM emp
WHERE empno = (SELECT MIN(empno) FROM emp)Justin

To find out the position on a string..

Hi,
I want to write a oracle query where i will pass the string and it will give me the position of 'a' on that string.
I dont want to write the procedure, only the select statement. Could we do this..
Like if i will pass Haraprasad, it should give me 2,4,7,9
if i will pass Gopala, it should give me 4,6
Thanks,
Haraprasad..

Like if i will pass Haraprasad, it should give me 2,4,7,9
if i will pass Gopala, it should give me 4,6nice homework assignment.
How are YOU going to solve this?

How to find out the 'z' user exit used in a Particular Transaction

Hi,
I have requirement to analyse all the user exits used in a transaction say 'VA01' . How can i find the user exits in a VA01 transaction. Can anyone suggest how to find the User exits
Thanks in Anticipation.
With Best Regards
mamatha

you can execute the following program , give the transaction name and execute
*& Report YCHATEST                                                    *
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

Find out the peak position from graph

Hello All,,
Actually i want to run this algorithm real time,, to find out the peak position from graph ,, i need to generate the position automatically,,, firstly i try to use image processing by apply threshold followed by edge detection and the find out the center of each detected part. the drawpack of this procedure is that the obtained images are different and that lead to different threshold values,, so how can i directly find the position from the graph,,, here i attach the image and the graph of the image,,
thank you,,
Attachments:
11.png ‏15 KB
13.PNG ‏85 KB

Hello Klemen:
here i will explain in more details: the main objective of my work is to calculate velocity of small particle,, i perform my experiments by exposing the particle to 2 light pulses,, and i know the time between the two pulses,, so i need to know the distance to calculate the velocity,,, for that i apply correlation,,, the spot that appear in the correlation image is an indication of symmetry,,,so i should know the location of maximum intensity of each peak. The central peak (highest intensity) will be the reference (zero point) and the other peaks locations should be subtracted from the reference peak to determine the shift,,,
Here is the sequence of the process:
Acquiring raw image, correlation, position of central peak, shift calculation, velocity determination,,,,,
applying image processing is good idea in case of post processing condition,,, but in my case i need it real time, that mean if i need to apply image processing for calculation, i have to find out a universal criteria for threshold value that can be applied for all raw images,, from my experiments i didn't find specific criteria & i have to manually change the threshold value,,
If I choose the intensity (grey level) to be the criteria, then the small peaks (symmetry) will not take place,, because their intensity is very low compare to the central peak,,,
So the most reliable procedure is to directly find out the position of the two small peaks beside the central peak and save this values into an array and use it for calculation,,, I hope I am clearly explain my problem..
Thanks
Attachments:
7-2.png ‏36 KB
7-1.png ‏3 KB
7-700.PNG ‏123 KB

How to find out that position is a chief position or not?

Hi All,
Kindly let me know to find out the position is a chief position or not?
I have to display various positions with Y if it is a manager and N if it is not.
Thanks!
Sachin

Hi
1. tcode PPOME
2. select the position by double click
in the overview position, chief position will be differentiate by symbol a person with red clothes and wearing a hat
in the tab "Basic Data", chief position can be defined if the "Head of own organizational unit" is being ticked/flagged.
Head of Organizational Unit
If you flag this field, the position becomes the chief position of the organizational unit that it belongs to. When this position is displayed again, it is automatically flagged and is automatically the chief position.
Technically, a relationship (A/B 012) is created between the organizational unit and the position.
Field Name : OMLEADER
Data Element: HROMLEADER
hope this info helps you.
best regards,
dhenny muliawaty (pei pei)

Query to find out the list of tables used in a package

hello,
can anyone please help me out with a query; i want to find out the list of tables used by a particular package.
thanks,
orton

orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
   v_suffix := 'loyees';
   v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
   execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts.

Any specific way to find out the tables being affected by a FormHandler

Please let me know an approach I can follow to find out the tables being affected on calling a particular Formhandler.

In our custom implementation, the basic work of a formhandler is to validatate data that came from a form. In our formhandler, we use some manager class and from manager class we call some tool class. In our tool class we will use some repository(In a repository we give definitionFiles=......../xyz.xml). So what operation we are going to perform via form like add, update, delete, show will affect tables in xyz.xml file.
In OOTB supost we are using ProfileFormHandler so it will affect ProfileAdapterRepository, which has xml file is useProfile.xml.
-RMishra

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the properties of a field's/object's?

Hello
I have field (say, its name is field_1) in my_form and i am coloring yellow by using below code of initialization event:
this.ui.oneOfChild.border.fill.color.value = "255,255,191"; (Actually, just for differentiating / tracing back purpose here am assigning this yellow color to this field, you can suggest me any thing else that marks / tags this field (i can not populate a value, bcz its visible to user), so that in the CHANGE event of this field, again i want to check/get/know that whether this field is tagged/marked or not)
fine. But, because of some/below reason, i need to find out its color by using JavaScript, pls. let me know how to figure out its color is as yellow by using JavaScrit?
Reason: If field_1's color is YELLOW (or you suggested any tag/mark as said in the above in red text), then i have to make HIDE the field_2
Field_0's position is extreme left, Field_1's position is middle and the Field_2's position is exterme right of the page.
I guess, i hv only one option of finding out color, hence am looking forward for JavaScript to find out the color of a field in question
(OR)
Also, pls. let me know the JavaScript that How can i make HIDE a check box for that COMLETE session (i mean, starting from launching the form in the browser until he closes the window/browser/tab/form), i guess, this idea also workes for my requirement, ( i want to put this code in the docReady event) .....no matter/what ever code is existing there in any event of that field level
Thank you

The unix file command:
file *
foo.doc ms-office file / word
bar.png png image, 32x32 pixels, no transparency
moo.hhml html text
note that as in the last - file names are ignored, it works by checking the beginning of each file's data against it's database, and as in #2 it can sometimes see a lot more than just the file format.
Don't know of a windows port, you could try cygwin

How to find out the application server instance name?

Hi,
I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?
The version of the server as displayed when the server is started:
$ ./oc4j -start
Starting OC4J from /oraInventory/j2ee/home ...
09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0) initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
Many thanks for your help!
Newman

J. Newman wrote:
Hi,
I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?If you have access to that server, then the following should give the instance name.
grep 'IASname' $ORACLE_HOME/config/ias.properties
you should also see it in the AS Control Console page.
The version of the server as displayed when the server is started:
$ ./oc4j -start
Starting OC4J from /oraInventory/j2ee/home ...
09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0) initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
Regarding the version numbers, this fourth digit refers to the Component-specific release number. The OAS documentation says this about it.
"This digit identifies a release level specific to a component. Different components can have different numbers in this position depending upon, for example, component patch sets or interim releases."
I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
Many thanks for your help!
NewmanI think Oracle software should always be installed in a separate directory. I think it may also generate errors in its functioning but it will certainly create a whole lot confusion and mess in later administration and configurations.
hope that helps!
AMN
Edited by: AMN on Oct 8, 2009 5:14 PM

To find out the POSITION OF Nth OCCURANCE OF A PARTICULAR CHARACTER

Similar Messages

Maybe you are looking for