To find the Stock in transit

Hello All,
I am developing an ABAP report in which I have to display the stock in transit.
The scenario is as follows :
There are two plants JF41 and JF46.
JF41 is transferring stock to JF46.
Movement type for transfer is 641
Recipet movement  type 101
When the supplying plant is transferring the goods it uses 641 movement type and when receiving plant is receiving the goods it uses the movement types 641 and 101. When receiving plant is supplying goods to another plant it uses movement type 641.
So in case of receiving plant there are two types of records for movement plant 641. One is receipt and other is transfer.
I want to display the records only for transfer. How should I distinguish between them as the movement type is only one i.e.641??
Thanks in advance
Neha

When the supplying plant is transferring the goods it uses 641 movement type and when receiving plant is receiving the goods it uses the movement types 641 and 101. When receiving plant is supplying goods to another plant it uses movement type 641.
the above statement has some flaw in it.
FYI,
in STO's-
supplying Plant issues the goods with mov type:641 ( assume its intracomp STO- sto within same comp code)
Receiving plant receives goods with mov type:101
      if receiving plant supplies goods to antoher plant ,then mov type: 641.
So in case of receiving plant there are two types of records for movement plant 641. One is receipt and other is transfer.
yeah, there are 2 types of records , One is receipt  which is -101 and other is transfer- 641.
Can you clear, which one you want to distinguish, there will not be 2 types of records with same mov type in Receiving Plant

Similar Messages

  • What is the table to find the Stock-in-Transit Quantity of a STO ?

    Hi
    What is the table to find the Stock-in-Transit Quantity of a STO ?
    Thanks
    Maruthi
    Edited by: MARUTHI RAM on May 12, 2009 3:00 AM

    no table, it is calculated from goods issues done in delivery and goods receipt done in the PO.
    You can find the values of goods issue and receipt in extra records in table EKBE

  • STO. How to create the stock in transit if the plant has been block.

    Problem with STO. How to clear the stock in transit if the plant has been block.

    The command builder takes a Select SQL and automatically creates a Insert, Update, and Delete SQL commands.  The database could have Insert priviledge and not Updates and Delete priviledges. But I don't think this is causing the problem.  I suspect
    the Orcacle Client handled an exception that wasn't returned to you code and the client is in an invalid state.  You may need call a new constructor for the client.  I would check the Control Panel : Adminsitrative Tools : Event Viewer to see if
    there were any error messages created when you ran the application.
    jdweng

  • The stock in transit field is not visible in MD04

    Hi Team
    Stock in transit visible on MD04
    STPO 28801084 is internal stock transfer from FI25 to FI28.
    Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
    when corresponding delivery  1202400481 have been PGId  at FI25 (2014/07/07)
    Stock in transit NOT visible on MD04
    STPO 28502250 is internal stock transfer from FI31 to FI28.
    The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
    even if  the corresponding   delivery 1202323564 have been PGId at FI31 (2014/06/23)
    Br, Kiran Unde

    Hello
    Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
    549752 - FAQ: MRP elements in transaction MD04/MD05
    9.  Question: Why does the system not display stock in transit for stock
        transport orders with order confirmation (notified orders)?
        Answer:
        Purchase order confirmations do not have to match the original
        purchase order delivery schedule lines. Moreover, the purchase order
        confirmation (view MDLA in materials planning) does not contain the
        same information as the purchase order to determine the stock in
        transit. The display of the stock in transit is therefore not
        implemented for the purchase order confirmation in the materials
        planning evaluation transactions.
    BR
    Caetano

  • Reverse the Stock in transit

    Hi all ,
    I have a material as stock in transit - long back ( using Mvt type 641).I dont have previous history for that stock ( delivery, document etc ) .So every time it is showing as Material in transit in Material master but it is not coming in MB5T . Long Back it was happened  . Now i just want to freeze the material stock without any previous document  Reference . how to proceed in SAP .
    Thanks in Advance
    Mike

    Hi,
    Please look into the movement type: 557.
    557 {Issue from stock in transit (adjustment posting)}:
         Only use this movement type (also the reversal movement type) under the following circumstances:
         Using movement type 557, you can correct purchase-order-independent stock in transit if:
         -   a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
         -   stock in transit still exists, even though there are no open stock transfer orders for the particular material
         This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
         This movement type may not be copied.
         Note! Before using this movement type, note the following:
         -   392205 Analysis stock in transit / Correction if split valuation
    Regards,
    Narayana.

  • Re: Where we find the stock keeping unit.

    Hi guru's.,
    Iam unable to see the stock keeping unit tab for the given material, hence in which view we can find in the material master.
    thanks
    tuljasingh.

    in tr. mm03 check view general plant data 
    thanks
    suresh yadav

  • Where do I find the stock weather and calculator apps in ios 7?

    I just upgraded to iOS 7.  How do I access the stock weather and calculator apps?

    There aren't built-in Weather and Calculator apps on iPads

  • Stock in transit for a particular date

    Hi all,
    How to find the stock in transit for a particular date.
    In MB5T date option is not available.
    Is there any other way or i need to gofor Z development.
    Kindly help me in this regard.
    Regards
    KK

    Try MB5TD. Please also check OSS notes 1120843, 1268193, 925384.
    Edited by: Csaba Szommer on May 22, 2009 8:28 AM

  • Stock in transit and in transfer

    Hi ALl,
    In material master plant stock view I can find the
    stock in transit in current period & In transfer (plant)
    question where can I find the document which has resulted in this stock . I have checked the report MB5T for recieving plant but I am not getting all the quantity which is there in material master
    where to find the documents of In transfer(Plant)

    In material master plant stock view I can find the stock in transit in current period & In transfer (plant) question where can I find the document which has resulted in this stock . I have checked the report MB5T for recieving plant but I am not getting all the quantity which is there in material master where to find the documents of In transfer(Plant)
    HI,
    Stock in Trasit and In transfer (Plant) both material document you can find by MMBE here Enter Material code and Plant (Receiving) and Execute. In the Stock overview screen Right click on Qty. shown (Stock In Transit and In Transfer) and click Material Movement. You can will get the Material document. Check Movement type 313 for Stock in Transit and 303 for In Transfer (Plant).
    Vraj

  • Where can i find the Datewise stock for a particular material

    Hello friends,
    In which table i can find the stock of a particular material on particular date?.MARD, MCHB these all tables gives the current stock of material.But i want to find the stock of material on particular date.In Report MB5B and MC.9 we can find the stock on particular date but is there any table from where these reports fetch the data?
    Thanking you guys in advance.

    Dear Jitendra,
    Check once again in this thread whether are you able to find out some help.
    But I'm sure MB5B is not getting the info from a single table,it's getting the information from info
    structures and few tables.
    table to see stock on particular date
    Regards
    Mangalraj.S

  • VMI and  reduce Stock in Transit - what are the right methods?

    Hi Gurus,
    We are using APO system to implement VMI functionality to replenish stock at customer location.  We need to build stock in transit at customer location after PGI happens in ECC.  
    Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
    SAP recommends following four methods to reduce:
    http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
    1.  Goods receipt information is not sent from the customer to the vendor
    2. The open purchase order quantity is sent from the customer to the vendor
    3. A proof of delivery is sent from the customer
    4.  The stock in transit quantity is sent from the customer to the vendor
    Out of these 1 and 2 methods are feasible in our scenario.
    Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
    Thanks in advance,
    Niranjan

    Dear Niranjan,
    I have implemented SCM-APO VMI using Past Releases of SCM  (version 4.1) for upto 300 Customer Sites & 500-1000 Products.
    In my experience ... this is a Big Custom Development using EDI - IDOCs / ALE wherein you Receive from Customer the Data either as "Open Orders" or  "Goods Receipt" of VMI Order at Customer Store or "In-transits" as they view it.  There is a Facility to receive them in the PROACT IDOC but you have to write IDOC FUnction Modules to post the Data to the
    VMI Planning Area as well as at Product-Location you have to Daily Delete the In-transit Order (Category EI or AH for ASN) and Upload Intransit Quantity directly into Live-Cache as a Order.  The Development is also complex as you need to Map the VMI Customer Product to the Vendor/Manufacturer's Product COdes in SCM-APO.
    I have experience implementing VMI like this several years ago ... and I am not sure if SAP SCM-APO built anything Standard for the Interface over the years.    If you are not sure get a ALE/IDOC & ABAP Consultant or  XI Consultant to work with you on the Project. 
    You can Delete In-transit Quantities by using RLCDEL  Transaction for Category EI or AH (if ASNs are used).  You need a IDOC/ALE Development to Calculate and Upload In-Transits and Update into the VMI Planning Area as well as Download to a FILE which you can use via another ABAP Development to Upload In-transits at the Product-Location (Customer) in SCM-APO.
    Hope this helps.
    Regards,
    Ambrish Mathur

  • VMI: reduce Stock in transit - what is the correct method?

    Hi Gurus,
    We are using APO/SCM  system to implement VMI functionality to replenish stock at customer location.  We need to build stock in transit at customer location after PGI happens in ECC.  
    Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
    SAP recommends following four methods to reduce:
    http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
    1.  Goods receipt information is not sent from the customer to the vendor
    2. The open purchase order quantity is sent from the customer to the vendor
    3. A proof of delivery is sent from the customer
    4.  The stock in transit quantity is sent from the customer to the vendor
    Out of these 1 and 2 methods are feasible in our scenario.
    Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
    Thanks in advance,
    Niranjan

    After research and testing  I found second method  looks good to me. I tested in our test system, this works pretty much they way it is described in the help (link in above message) .  The issue is resolved.

  • VMI: Reduce Stock in transit - what is the right method?

    Hi Gurus,
    We are using APO/SCM  system to implement VMI functionality to replenish stock at customer location.  We need to build stock in transit at customer location after PGI happens in ECC.  
    Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
    SAP recommends following four methods to reduce:
    http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
    1.  Goods receipt information is not sent from the customer to the vendor
    2. The open purchase order quantity is sent from the customer to the vendor
    3. A proof of delivery is sent from the customer
    4.  The stock in transit quantity is sent from the customer to the vendor
    Out of these 1 and 2 methods are feasible in our scenario.
    Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
    Thanks in advance,
    Niranjan

    hey
    I don't think this is related to XI.
    Please post it in correct forum
    https://forums.sdn.sap.com/index.jspa?categoryID=1
    Thanks
    Aamir

  • The system could not find the finished material in the stock.

    The system could not find the finished material in the stock and gives the following error:
    Only 0 YD of material 9000345 A-PIECE01 available.
    I received the batch managed material from production with T-code=mb1c and mov type=521.
    The received material is transferred into material with T-code=mb1b and mov type=309.
    And finally the material is packed and thus the handling unit is created.
                                     whenever i comes to make the delivery order in vl01n,the system could not find the stock packed in handling units and gives the error(Only 0 YD of material 9000345 A-PIECE01 available)
    Regards:Vijay

    Hi Vijay,
    I have a question that have you define the UoM properly in the material master.
    Also check the stock is showing or not in the system for your material.
    Regards,
    MT

  • What is the Table for Stock-in-Transit quantity ?

    Hi
    In which Table does the Stock-in-Transit quantity store.
    Thanks
    Maruthi

    Hi
    Check  the table MARC fielld TRAME(stock in transit). I think this field will be updated only for STO in the same company code.
    You can use the Tcode MB5T to get the Stock in transit details.
    Also check the FM MB_ADD_TRANSFER_QUANTITY.
    You can use MSEG table with STO Purhcase order number and with movement types
    641     TF to stck in trans.
    642     TR to stck in trans.
    643     TF to cross company
    644     TR to cross company
    645     TF cross company
    646     TR cross company
    647     TF to stck in trans.
    648     TR to stck in trans.
    based on your requirement.
    Regards
    S.Senthil

Maybe you are looking for