To generate some space in Dev. server

Hello all,
My development server is showing no free space because of which any table i m tring to access is giving dump.
How do i check the space taken split up in my development server and how do i remove some entries to get some free space.
Basically i need to generate some space in Dev. server.
how do i do that??
its urgent!!!!!
thnx in advance.
Regards,
Dhanya.

Hi,
As Eugene said PSA and Logs mainly cause Space problem check for them . And to know how much ur Objects like ODS,Cubes etc are using ,go to DB02->detailed analysis .Give ur object name ( *cubename) ...it will give complete space statistics of the object . it will help you in better analysis . And also see whether the files generated in the application server as a result of Query Extract or InfoSpoke are to be deleted or not .
Regards,
Vijay.

Similar Messages

Copy and Paste from SQL server to Query Generator eliminate spaces

Hi:
My query is run perfectly on SQL server.
However, when I copied it to Query Generator in SAP B1, it can not be run. When I look closely I see that some spaces have been truncated for example between the fieldname and key words like FROM, LEFT OUTER JOIN. I have to then going through the Query Generator in SAP B1 to put in the spaces in appropriate places. This process took long time and require very close attention and did not make any sense to me, since my query already work in SQL server query manager.
Is there any way that we can make Query Generator in SAP B1 keeping the same format (ie. not eliminate the spaces) as in SQL server Query Manager?
Best Regards,
Phong Nguyen.

Here is what I mean:
SELECT YEAR(T1.DocDate) YEAR_NO, DATEPART(wk,T1.DocDate) WEEK_NO,SUM(T1.LineTotal) TotalShrinkage_Sales, (SUM(T1.LineTotal)/SUM(T1.Total_Sales)) Percent_Shrinkage, SUM(T1.Total_Sales) Total_Sales,COUNT(DISTINCT T1.Shrinkage_No) Shrinkage_Volume, SUM(T1.TotalCost) TotalShrinkage_CostFROM (SELECT V0.ITEMCODE, V0.DocEntry Shrinkage_No, V0.DocDate, V0.LineTotal, 0 Total_Sales, V0.TotalCostFROM dbo.V_SHRINKAGE_TOTAL V0 WHERE V0.TransType='Shrinkage'UNION ALLSELECT V1.ITEMCODE, null Shrinkage_No, V1.DocDate, 0 LineTotal, V1.LineTotal Total_Sales, 0 TotalCostFROM dbo.V_Sales_Invoice V1UNION ALLSELECT V2.ITEMCODE, null Shrinkage_No, V2.DocDate,0 LineTotal, V2.LineTotal Total_Sales, 0 TotalCost FROM dbo.V_Credit_Note V2) T1WHERE DATEDIFF(wk,T1.DocDate,getdate())<=12GROUP BY YEAR(T1.DocDate), DATEPART(wk,T1.DocDate)ORDER BY YEAR(T1.DocDate) ASC,DATEPART(wk,T1.DocDate) ASC
You can see the the third line (top down) the space between the field TotalShrinkage_Cost and FROM has been eliminated.
Also you can see that on the 4th line (top down) the space between the field V0.TotalCost and FROM has been eliminated.
Also in the 5th line (top down) you can see: V0.TransType='Shrinkage'UNION ALLSELECT --- spaces have been eliminated between 'Shrinkage" and UNION and ALL and SELECT
The list can go on.
Can you help there?
Thanks,
Phong Nguyen.

I have to backup of Gmail with Thunderbird Portable, so I could free some space on server - but when I use IMAP (to keep labels) after deletin on server...

I have to backup of Gmail with Thunderbird Portable, so I could free some space on server - but when I use IMAP (to keep labels) after deletin on server...
...my post also deletes on Thunderbird. Please make an option to prevent it, so deleting on a server doesn't effect mail in the Thunderbird. I would be so happy to have it...
David

First Thunderbird portable is supported by its author at portableapps.com.
Secondly you are describing exactly how the IMAP email standard works and Thunderbird has no control over that.
Thunderbird has Local Folders to move messages that you want to keep locally. Maybe the portable version does too.

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

Update Knowledge base on Production with Dev Server

Hi Friends,
I have a knowledge base on my dev server and we imported same knowledge base to Prod server.
So here my questions is, we have created some rules in the dev knowledge base so we need to replicate same rules to prod knowledge base? how to overwrite prod knowledge base with Dev knowledge?
Can anyone guide me how to do that please?
Thanks,
RK

Hi Samir,
Stopping the e-mails to be sent out shouldn't be a problem in this system I think. You can still test everything, without the business getting confused. If you want to see if an e-mail is correct you can still check it in transaction SOST without it being sent.
Otherwise inform the business about e-mails sent form different systems and add the system name in the e-mail message so they know from which system the e-mail is comming and if they have to respond.
Regards,
Martin

In dev server my payment advice form f110_prenum_chc is not working

hi,
friends i need urgent help.
1) i have copied f110_avis_in frm 000 client to 200 client with form name
   z_prenum_dup.
2) i have copied f110_prenum_chc frm 000 client to 200 client form name
zf110_prenum_chc1.
3) then i modified my both forms in 200 saved assigned TRs and
transported frm DEV server to PRD server(client 700).
4)in dev server 200 client my both forms are working
but in prd server 700 client my form cheque z_prenum_dup is
working but payment advice form zf110_prenum_chc1 is
not working.
5) but i can see my both forms r their in 700 prd server in se71 t.code.
6) if i run f-58 tr.code and by switching on debug mode i can see my
   cheque form but not payment advice form.
7) if i run in 200 client i can see my both forms.
can any body plz help me out of this issue.

Dear,
   I will be able to put some points, if you can give me some more idea about ur problem,
1, Does system giving any error..?
2, Can you see a preview..?
As I understood, it must not have any problem in transportation.
You can also check with Respective functional consultant whether he has done with required customization in NACE..?
One more thing you can do is,
open a program RSNAST00 and put break point at " PERFORM (tnapr-ronam) IN PROGRAM (tnapr-pgnam) USING returncode", here you can check at runtime ( While in debugging mode) the value of field TNAPR-FONAM, this value must be your SmartForm. If it is not the case then, there is problem with NACE settings and contact your functional counterpart.
Hope it's helpful .......Enjoy.
Regards,
Chetan

How to generate blank spaces at end of the record in a flat file with fixed

Hi,
I am generating a flat file with fixed length.
In my ABAP program, i am able to see the spaces at the end of the recors in debug but when download to applicaiton server i am not able to see those spaces.
How can i generate blank spaces at the end of the record in a flat file?
Please update
Thank you

How are you downloading the file? And, How are you looking at the file on the application server?
Can you provide snippets of your code?
Cheers
John

Error while Importing from Dev Server using Transport Request.

Hello Everyone,
                           Please help me on the following problem.
I imported my package which consists of 2 reports, one module pool and one copied standard Function Group consisiting of 3 FM's from my DEV server to Quality Server using Tranport Request(Co files and Data files) It was successful.
However due to some reasons , i need to delete everyting from Quality Server.
So i again created a new request and assigned everything again to this new request. But now some objects are imported like Reports but module pool and Function Group incudind FM's are not imported...
Can anyone tell me why?
And What should i do in this case?

Yes when i tried to import the Request and checked the logs, it says Error.
The Log is like.
Selection for Import                     17.08.2011 17:03:13    (0) Successfully Completed
Import ABAP Dictionary Objects           17.08.2011 17:03:28    (0) Successfully Completed
ABAP Dictionary Activation               17.08.2011 17:03:36    (4) Ended with Warning
Import                                   17.08.2011 17:03:59    (8) Ended with errors
Check Versions                           17.08.2011 17:04:00    (0) Successfully Completed
Generation of Programs and Screens       17.08.2011 17:04:06    (4) Ended with Warning
I have checked everything for Module Pool also as well as for FG but i am unable to understand te problem.
My one colleague is saying you need to have a new name for each object.

BIP report output in PDF and RTF generating some blank columns or � symbols

Hi Experts,
I am new to BIP. I have developed some BIP reports in 10.1.3.4.1 version which are working fine in Dev and UAT environment.
But it's generating some blank columns and some columns with proper data and some columns with"cellphone" kind of symbol in PDF and " �"
symbols in RTF in Prod environment.
In all the environments the version of BIP is same.
So any help in resolving this issue is appreciated.
Thanks in advance..
Regards,
Suresh.A

All of the complex report logic is handled in your Oracle Report (rdf) file.
If your Oracle report is working OK, then this report should be generating XML.
After running your report, go to the View Requests window. Highlight your request, and click the Diagnostics button. Then click the 'View XML' button. If you see XML data, then you should be OK.
When I faced a similar issue, it was because the '1 step' process didnt work for the particular report I was using. The '1 step' process doesn't work for every report. Which report are you using?
If the report is submitted via a form (not the concurrent manager request form), then you probably need to use 2 steps to produce the desired output.
For more information, see the following thread:
Enhancment to avoid 2 step check printing
HTH,
Mark K

Dev Server 6 and OAS 4.08

I am currently trying to set up an environment using Developer Server (6) - Forms and Reports servers, OAS 4.0.8.1, NT4.0 sp5.
I have managed to configure the reports server and it operates both in cartridge and CGI mode. However the Forms Server is driving me nuts...I keep getting the dreaded white screen.
I have several questions
1. Should i have installed OAS and Dev Server in different Oracle Homes?
2. Do i need Jinitiator? If yes is it version 1.1.7.18.
3. Do i need patch set4 (6.0.5.32.0) for Forms? If yes where can i get it?
I really hope some of you can help - i have looked at all the Oracle documentation and all this has served to do is confuse the issue further.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by tony ( [email protected]):
I am currently trying to set up an environment using Developer Server (6) - Forms and Reports servers, OAS 4.0.8.1, NT4.0 sp5.
I have managed to configure the reports server and it operates both in cartridge and CGI mode. However the Forms Server is driving me nuts...I keep getting the dreaded white screen.
I have several questions
1. Should i have installed OAS and Dev Server in different Oracle Homes?
-->> Yes, install developer 6 first in default home cause multiple homes is not supported.
oas408 en ora815 now must installed in different orahomes.
2. Do i need Jinitiator? If yes is it version 1.1.7.18.
3. Do i need patch set4 (6.0.5.32.0) for Forms? If yes where can i get it?
--> Yes , you need a patch on developer.
Check metalink.oracle.com for the exact number. Also you download the patches here.
I really hope some of you can help - i have looked at all the Oracle documentation and all this has served to do is confuse the issue further.
<HR></BLOCKQUOTE>
Good luck, I'am trying to get webfroms on oas 4.0.8.1, souns like you are in the same direction.. if you wish we can keep eachother sharp wit e-mail. You can mail on [email protected]

Please free some space - sapinstal - NW CE 7.1

Hi Community,
I´m installing the SAP Netweaver Composition Environment 7.1 including
Enhancement Package 1 on Windows 2003 R2 Standard x64 Edition and
Oracle 10.2.0.4.
When the sapinst run the task progress, in step "Install software unit"
I have the error:
DeployException:[ERROR CODE DPL.DCAPI.1027]
SduLoadingException.
Reason: Please free some more disk space.; nested exception is:
com.sap.engine.services.dc.cm.deploy.NotEnoughDiskSpaceExcepion:
Usable free disk space bytes is less than
minimal number of bytes to operate . Please free some space.
Any idea for this problem ?
Thanks in advanced.

Hi Carlos,
As per error message, you check the space required for your server installation : -
Please make sure that you meet following system requirements:
-Operating System:
Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
-Hostname must not exceed 13 characters
-NTFS-File system
-Internet Explorer 5.5 or higher or Firefox 1.0 or higher
-At least 1 GB RAM (2-4 GB recommended)
-Pagefile size according to your RAM settings.
-Intel Pentium III/1.1 GHz or higher (or compatible)
-30 GB hard disk space temporary during installation - 24 GB permanent
-High-resolution monitor (1024x768 or higher, 256 colors)
-Make sure that no other SAP system is installed on your computer
-The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
-If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
Hope it helps.
Regards,
Arun

How to get dev server files in to SAP@webstudio

Hi,
I have installed SAP@webstudio in my PC for doing some enhancements for my project.How can i get all development files which are in existence into my toool Webstudio?
I did as below.
tools>Repository>Connect to R/3 System.
Then it is displayed all files in the tool with read only access.How can i modify the files if i wish.
In the tools-->repository,all the fields are disable,except connect to R/3 system.
Plz can any body help me,how to get connected to my dev server with webstudio
Thanks in advance
Sridhar Raju

First create a new project on the workspace project tab. You can then switch the repository tab and find the service you want to modify. Right click on the service and do a 'get'. This will then place the files in your project. From there you can do a 'check out' and then modify/publish the files. Once you are completed be sure to 'check in'.

Some files on the server may be missing or incorrect.......................

Having launched a web site that looks perfect in the exported HTML. - When viewed online, I keep getting the message "Some files on the server may be missing or incorrect.........................Clear cache and try again....."
I have tried everything, even deleted all from the server, exported HTML anew, and uploaded again, but I am still receiving the same message. - Anybody have any idea on hoe to resolve this?
http://www.jw-studio.com

Hi Razvan,
Thank you for your reply.
I have updated the Muse pages, exported the site and uploaded it several times via ftp: no result.
Even in Muse if I say: upload all the files: the upload gets stuck at the museoverlay.js gets stuck and won't upload the site...
What I think the best way is to redesign the whole site in the new Muse...not really looking forward to do that...
If you have any other thoughts: welcome!
Thank you in advance.
Regards,
FvmDesign
Op 25 nov. 2014, om 01:25 heeft Razvan C <[email protected]> het volgende geschreven:
Some files on the server may be missing or incorrect.......................
created by Razvan C in Help with using Adobe Muse CC - View the full discussion
Hi FvMDesign,
Your site (www.fvmdesign.nl) is published with Muse version 2014.2.1.284, but one of the files in the /scripts/ folder (jquery.museoverlay.js) was generated with Muse version 2014.1.1.276.
Each time you update Muse to a new version (e.g. from 2014.1.1.276 to 2014.2.1.284), please make sure you re-upload the "scripts" folder as well, as those libraries may change, or we may add new ones. If they are left out of date or if they are missing, you may experience random errors or weird behavior in your site. Also, each time you change a HTML page in Muse, it is a good idea to re-upload the CSS files that page is using.
Alternatively we recommend using the built in FTP Upload functionality that will take care of uploading obsolete files automatically, so you will not have to manually choose which files/folders to update.
Thanks!
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6959438#6959438 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6959438#6959438
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Created Infobects in DEV server and Transported to QA now I want to delete

Hello All
Created Infobects(10) in DEV server and Transported to QA now I want to delete two infobjects from QA/NOW how to delete in QA?
should I delete in DEV and transport to QA,if I do like this will that deleted objects will disappear from QA?should I maintain same transport request number orelse different one?
cAN V DELET OBJECTS IN QA?
pL LET ME KNOW THIS?
Many Thanks
balaji

Hi,
Once you have done a Transport of elementary objects such as InfoObjects from Development to Quality and you want to delete the InfoObjects from Quality system then you cannot delete those objects with the another transport requests. Instead you should have an authorization to delete those objects in Quality.
But you can remove those requests from the Transport Queue so as to avoid the requests accidentally transported to production.
If you take other objects like cube or ODS or Multiproviders and you want to delete some infoobjects from those infoproviders you can make the changes in development and you can transport to quality system. In this case the objects will be overwritten with the new version.
Same is the case also with InfoObjects. You can change the property but you cannot delete in quality.
Hope this is clear to you.
Regards,
K.Manikandan.

Generate work schedules in production server

Hai Friends
I am trying to generate work schedules in production server, its saying only display client, then basis team opened the production server and while trying to save, its asking customizing request.basis guy saying that he wont create request for that in produciton.
Is this the right way to do?
When I trying to generate Work schedule in Dev, then also its asking customizing request, is it transportable one? Or we need to generate the work schedule in production it self? Please clarify
Thank you

Hi,
Generate the workschedules first in Dev server...you will get a customizing request. Save it.
Get the request transported to your testing / Quality server by Basis team.
Then once okay...get it transported to Prd server by the Basis team.
Doing changes directly into PROD client by opening it is not advisable...this will cause problems in future whn issues are encountered and u need to test configs for future developemts.
Keep the servers in your landscape in sync with respect to config.
Regards,
Shreyasi.

To generate some space in Dev. server

Similar Messages

Maybe you are looking for