To get one particular req in ods

Hi Experts,
I have got repeat delta data in ods , but it has not got activted , when i am trying to activate it it shown me message a particular req needs to be updated , so what i did is i went to rsrq given the req and made that green as red in monitor and went back and activated ods and it worked
my concern is that now
i f i want that particular req in ods what can i do
Thanks,
devi

Hi Nithya,
If your data is available in PSA,then you can move the request using the Reconstruct option from the Manage tab .But in ODS the data is stored based on the overwrite .So you cannot simply insert the request into ODS. You need to delete all the requests higher than that particular request and then you need to insert all the requests in a particular order.
But before doing this you need to make sure the data is available in PSA. If there is no data in PSA ,then this option will not work.
Thanks.

Similar Messages

ODS not picking one particular master data record

Hi All,
Problem is when we run a query on ODS,it is not displaying the one particular data records.Then we check the ods that particular record values are not available,but it is in master data tables.
My question is what will be the reason for this.we are using Generic extraction.
thanks

Hi,
Check for primary keys of master data tables and key fields of ODS . I think there should be mismatch which is why some records are getting overwritten.
Also in the ods request check number of records transfered and number of records added.
ODS key fields should be exactly same as Primary key of master data table otherwise there are chances of loosing data.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

I have sent a file to the trash bin. When I come to empty the trash bin everything goes out except this one particular file and I get a note saying the file is 'in use' but it is not. How can I delete this file from trash?

I have a Macbook Pro with OS X Lion 10.7.2. I have sent a work file to the trash bin along with many other files. When I empty the trash this one particular file remains and I get a message that this file is still in use. I have tried returning the file to my documents, opening it, closing it and then sending it to trash and again I try to empty trash but the same message comes up - Q - How can I trash this file permanently?

First just try logging out and back in. Whatever is holding on to it may not be running after the logout thus freeing it so you can trash it after logging back in.
You might also try Trash It!
Lastly, look at the following for suggestions:
The X Lab: Solving Trash Problems

Getting wrong information when trying to access one particular websitewebsite access

I have a problem when carrying out a search on ONE particular website. I have contacted the company (John Lewis plc) who inform me that they do not have any roblems with their site . This problem started a month ago when I kept getting a message saying 'Due to a technical problem the page you requested cannot be displayed'. I have deleted the site from my Bookmarks and re-added but to no avail. I can now access the main page of the site but when I try to search for a product it just keeps telling me 'Due to a technical problem the page you requested cannot be displayed'. As I previously said, it only happens on this website but, having checked witheir Customer Support Team, they have confirmed that no one else has complaine of this problem and they are not aware of any problems with their site. Can anyone suggest a cure please?>

Thank you for your response but after trying everything else I deleted both my registration and password on this site and re-registered. This seems to have cleared the problem.

I cannot stay on one particular web page without getting re-routed somewhere else.

I stupidly went to a site I should not have gone to last night, and downloaded a PDF. Now when I go to one particular page, I get re-routed to other pages, like for cooking sites and other nonsense. If I go to this page (http://www.washingtoncitypaper.com/) right after deleting all my history, cache, cookies, etc...it does allow me to actually stay on the page, BUT then these repeated boxes come up asking me if I want to stay on or leave the page.
This does not happen in Safari.
I'm not sure if this is a glitch or malware.
Thank you.
UPDATE: Thank you very much for your response. It turns out that the site had been attacked and was generating that horrible action.

Update Firefox to 17.0.1. [[Update Firefox to the latest version]]
Then, Reset Firefox [[Reset Firefox – easily fix most problems]]

I was having problems with my iPhone 5s. Was able to get another 5s. In the process of setting it up, but it is taking forever ... and it seems to be frozen at one particular place.

I was having problems with my iPhone 5s (couldn't receive iMessages or emails). Cell company tried "fixing it" but to no avail. They ordered me a repacement 5s. Trying to set up, but it is taking forever. Seems to be stuck in one particular spot. It's at the stage with a black screen, white apple icon and a bar underneath. The bar is is just a fraction complete, and it has been stuck in this spot for almost an hour. Tried to restart it but it went to the same spot and froze again.

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Ship-To Address not getting picked for one particular user

Hi SRM Gurus,
I am working on SRM5.0 system with ECC6.0 as backend.
For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
Can anyone tell me why this is happening for one particular user?
Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
Can anyone help me out?
Thanks n Regards,
Ancy

Ship to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
now , when I am trying to create a SC and I have tried to add delivery address bby 2 types .
1. By adding through the portal
2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
I have also made it default however when I raise the SC it again shows me as blank :
I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !!

Network problem with one particular iMac in a home network

I want to report a problem involving one particular iMac (2008 Al 24").
On my home network (Apple Airport Extreme and Express extensions, about five Macs and couple of iDevices), all other Macs can see and connect to each other as well as printing to the networked Brother printer without problem.
However, on one particular iMac, I can see all other Macs, can set Brother printer as default with green dot next to it in Print Preference Pane, but I can not connect to other macs, nor print to the printer. Meanwhile, the iMac can get on the internet without any problem. I checked Share Preference Pane and all settings are same as other macs.
The iMac used to work flawlessly until recently, and I first noticed the problem because I could not print, getting a message the printer can not be found (and the dots turn yellow for a while then went back to normal green). Then, I found neither the iMac, nor other macs on the network can connect to each other, even though I can see all of them in Finder.
I opened Apple Remote Network on my own mac, and I can see and connect all other shared macs, but this iMac's status showed not online, even though the IP adress is valid. As a results, no other macs can connect to the iMac, either. It seems to be a problem with the intranet only, not internet.
One more thing, about a month ago, the iMac popped out a warning about network name, saying the old name was in use (conflict) in the network, so I have to change it in Share Pane. Not sure if this is related to the intranet problem.
Reboot and repaired permission several times, no change. Hate to reinstall everything. Any help would be greatly appreciated.

Another update:
For unknown reason, my iMac was suddenly back onto the home "intranet". It can be accessed by my MacBook Air through Finder Connect, and can also be seen by Apple Remote Desktop.
However, printing is still a problem while other macs have no problem printing to the same printer. Whenever I send a print task, either Word document, or other programs such as GraphicConverter image, the iMac tried to connect to the default printer, but failed, and wanted to try again in 30 seconds 9and continued to fail). Meanwhile, the green dot next to the printer selection turned to yellow in Preference Pane. But as soon as I cancel the print job, the printer status went back to normal green.
The printer is a Brother color laser HL-4070CDW, connected through wireless (g only), with it own DHCP but specific IP address. I printed out a setting for the printer and all looks normal, and all other macs can print to it without problem. Other macs can also get access to the printer profile, and check inks copy counts, etc, but the iMac cannot.
Only thing changed since last post was a new update for Apple Airport firmware (to 7.5.2 I think). So my problem is still half solved: can connect to other macs on the same network, but still not be able to print.

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. Any ideas what is causing this?

I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?

No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.

[ASK] Get One Row of Property Value From Dimension in Script Logic

Hello, i need help about how to get one row of property value from dimension in script logic.
Let say there is CATEGORY dimension and the members are like this :
ID                                                  YEAR   Status
PLAN_2011                                   2011        A
PLAN_2011_V1                            2011        I
ACTUAL_2011                              2011        I
FORECAST_2011                         2011        I
FORECAST_2011_V1                  2011        A
PLAN_2012                                  2012        A
PLAN_2012_V1                           2012        I
ACTUAL_2012                             2012        I
FORECAST_2012                         2012        I
FORECAST_2012_V1                  2012        A
If i scope CATEGORY like this :
*XDIM_MEMBERSET CATEGORY = [CATEGORY].PROPERTIES("YEAR") = "2011"
Then i will get member scope like this :
PLAN_2011                                   2011        A
PLAN_2011_V1                            2011        I
ACTUAL_2011                              2011        I
FORECAST_2011                         2011        I
FORECAST_2011_V1                  2011        A
Question :
In script logic, how can i read the second record of scope and move it to variable ?
Ex. : I read second record, so i can get the data of second record (PLAN_2011_V1, 2011, A).
Is there any function to read all record that had been scope ? So i can read all those 5 records.
Is there any substring or offset function in script logic ? How to use it ?
Thank you.

Hi,
Firstly, when we scope the logic, it doesnt fetch the entire record from the member sheet. It just fetches the ID.
Secondly, we dont have the feasibility to read only the second ID and skip the others. However, one alternative is that you use the SELECT statement to store all the IDs in a variable, and then use a FOR loop. But this will loop through all the 5 IDs, as per your example. If you want to skip all the IDs except one, you should maintain some property, so that all the IDs are neglected which doesnt have a particular property value.
Hope you got the idea.

Query not executing for one particular value

Hi
I have query on multi provider. and this multi provider is combination of Info objects only but not any ODS or cubes. I have one key figure in this multi provider.while executing the query i need to give input for variabl which has 7 different values. Query is executing fine for 6 values but not for one particular value.
query executed in listcube transaction and it is executed fine here for the same selection. then what might be the reason?
Please advise as soon as possible.
Thanks

Hi Kiran,
are you maintaining any filters in the query? or is there any logic in the exit for this variable.
regards.

Getting one day difference in add_months function

when i am using the add_months for a
particular days i am getting one day
difference
ex : select add_months(to_date('30-aug-2000',
'DD-mon-YYYY'),27) from dual;
result : 30-nov-2002
select add_months(to_date('30-nov-2000','DD-mon-YYYY'),-27) from dual;
result : 31-aug-2000.
differnce between : 31-aug-2000 and 30-aug-2000
is comming

When you are passing the last day in the month to the add_month function ( 30-NOV-2002) it will always return the last day in the resulting month ( 31-AUG-2000).
This is a known Oracle bug and you'll need to create your own logic for adding month to avoid this problem. You can use last_day function in there.

TS3569 On my iPad 2, one particular recurring event keeps duplicating itself. I delete the duplicate and it reappears a day later. Help.

On my iPad 2, one particular recurring event keeps duplicating itself. I delete the duplicate and it reappears a day later. Help.

Do you use MobileMe and an iPhone? If yes, do this in the following order:
Mac:
(1) back up the applications giving you problems
iPhone
(1) Open settings, then open "mail, contacts, calendars"
(2) Open .Mac account
(3) Turn OFF the applications that are causing problems
(4) When you turn off on of the applicatios, a red sign "stop syncing" will appear. Press it. A msg will appear "turning off xxx"
(5) Get out of settings
(6) Don't do anything for about 20 mins. Don't touch your iPhone or your Mac. (syncing needs time to settle down)
After 20 minutes...
Mac:
(1) Open each application that is giving you problems. Fix errors. Back up.
(2) Do this for each application
iPhone
(1) Open settings, then open "mail, contacts, calendars"
(2) Open .Mac account
(3) Slide switch to ON for each app you turned off; there won't be a msg
(4) Get out of settings
(5) Via MobileMe, syncing will start again.
Wait about 20 minutes, again. You should see all in order after that. At least, that was my experience.

EDI message is not sending to the third party for one particular SA

DearAll,
We have the scenario to send the schedule lines to the third party system. for one particular schedule agreement schedule lines not sending to the third party system.
while processing the messgae it is giving the error as "Message XEDI already processed on 20110317 070042"
What could be the reason?.. we have checked all the EDI settings maintained for this supplier. some two weeks back there is no problem now only getting this message.
how to resolve this?..
Thanks in Advance
Ananth.

Hi Hareesh,
Thanks a lot for the help. I have tried with removing the xml namespace, still the same result. I believe, the problem is with MTs tag in response message structure, bank xml data is trying to map with the response structure in PI, but when its finding the MTs tag I believe then its not mapping, and directly its passing the response in SXMB_MONI without any mapping.
My question is how can I define my response structure without the MTs tagm, I mean same as what I am receiving from bank.
Also I tried with without any mapping in response structure, I mean I used only one Message type for "response from bank" to "response to ECC" , without xml namespace, in this case I am able to receive the response in ECC, but there is exception called "PARSE_APPLICATION_DATA Error during XML => ABAP
conversion: Response Message; CX_ST_MATCH_ELEMENT in " while receiving response, and when I go and see the logs, it says "System expected element 'MT_Response_MT940_Test'" , as its try to match with the defined structure in PI.
Please experts help me, so my question is how can I avoid the MTs tag in my response structure, I just want to define my response structure in PI same as bank is sending me the data in xml tag, without any MTs tag.
Thanks,
Farhan

How to edit one particular entry in custom database table

Hi all,
I want edit one particular entry in custom database table with or without a program.
1.   I tried using SE16N and &SAP_EDIT but im unable to get entries to edit.
2.   I tried using '/h' and 'code = edit' but it is prompting me to delete an entry but not edit.
3.   I tried using modify statement. But in vain.
I tried this statements through programatically,
                        MODIFY itab FROM wa_itab TRANSPORTING zabc.
                        MODIFY zsample_02 FROM itab.
please suggest with out writing a program, if possible.

Hi ,
Try with FM SE16N_INTERFACE.
1 .Go to SE37
2. Enter FM SE16N_INTERFACE and execute
3. Give table name in Itab,
I_EDIT                  =
X
I_SAPEDIT             =
X
4. Press F8
5. Edit table entries and save.
Thanks

To get one particular req in ods

Similar Messages

Maybe you are looking for