To know client size

hi all,
       i need to copy one client.  But i have less size in database.  I want to know size of client.  In that i seen RSSPACECHECK report its asking client table.  What parameter i need to give and what table it is.  Can anyone give idea about that and how many ways check the client sizing.
Regards,
Vardhan

Hi,
066: Early Watch Client
This client is purely a service client that enables SAP to access remotely the customer system with regard to analyzing errors and performance. You must not change or delete this client.
check this link for more details [http://help.sap.com/saphelp_46c/helpdata/en/2e/d9530294f911d283d40000e829fbbd/content.htm]
Regards,
Venkata S Pagolu

Similar Messages

  • Procedure to know client size, and client copy.

    Dear Experts,
                        I am new to client copy process.Please help me in some of my queries.The client which i want to copy is a customizing client (120) in development server.And new client to be created is also on development server itself.
    1). How can I know the exact size of the client which i want to copy?
    2). Will all the customizing done on the (120) client be copied to the new client created .
    3). Will all the profiles and parameters be copied as the source client?
    4). And Detailed process from client creation to client copy.
    Please help me .
    Thanks in Advance
    Regards
    Akif

    Dear Umesh,
                       As you told to add the space i did that .And started the client copy but it ended with 4 following errors:-
    Table/Object
    Component
    Error
    AGR_HIER
    BC-SEC-USR-PFC
    Write Error (See System Log)
    DSYS_PHCONT_E_CD
    PY-XX
    Write Error (See System Log)
    SOES
    BC-SRV-GBT
    Write Error (See System Log)
    ZFX_BCBNR
    DDIC Error        (See SE14)
      Please suggest what should be done of this errors.
    And thx for ur total support.
    Regards
    Akif
    <u></u><u></u>

  • How to know the size of a client and an instance ?

    hi,
    How to know and measure the size of a client and an instance ?
    comment and advice will be appreciated.
    regards,
    kent

    Hi Kent,
    I always measure the size of the complete DB (instance) with DSPLIB *PRINT in batch - the very last line is the size. You could have a look into DB02 as well.
    The client size is more complicated ...
    You could do a "test-client-copy" - there it reports a size - but this size is far too small normally ....
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • How can i know the size of client

    hi
    how can i know the size of client ?
    SAP  ECC6
    OS AIX 5.2
    DB  ORACLE10g
    regards
    Karan

    Hi,
    1)Test run normal client copy .
    =DDt will give the size.
    2)There is SAP note for Client size analyse.
       Here is 118823
    3)run program YSTABSIZ.
    Regards,
    Muralidhar

  • How to know the size in byte of a file before importing it with ftp

    hello
    i have a file in witch there is the pathe of many file
    i reade these path and i use ftp to get these file
    my problem is that i want to display a progress bar during the getting of file
    so dont no how i can know the size of these file to put a maximum to the progress bar

    package cni;
    import javax.swing.*;
    import sun.net.ftp.*;
    import sun.net.ftp.FtpClient.*;
    import java.io.*;
    import java.lang.*;
    import sun.net.TelnetInputStream;
    import java.util.*;
    import java.lang.String;
    public class FTPclients
    //Variables
    private static String server = "faycal";
    private static int port = 21;
    private static String user = "anonymous";
    private static String passwd = "[email protected]";
    public String toString(JTextField tx)
    String txt;
    txt= new String(tx.getText());
    return txt;
    public static void main(String args[])
    ConnFile cf = new ConnFile("d:\\cni\\adresse.txt");
    FTPclients fc = new FTPclients();
    ConnFile cfbis = new ConnFile("d:\\cni\\chemin.txt");
    try
    //String s=cf.lectureid();
    String s;
    while((s=cf.br.readLine())!=null)
    String s1=s.substring(0,s.lastIndexOf("\\"));
    String s2=s.substring(s.lastIndexOf("\\")+1);
    System.out.println(s1);
    System.out.println(s2);
    //ajout du double anti slash a la chaine s1
    String name =s1;
    StringBuffer sb = new StringBuffer(s1.length()+10);
    for(int index=0; index<s1.length();index++)
    char c = s1.charAt(index);
    sb.append(c);
    if(c=='\\')
    sb.append('\\');
    System.out.println(s1);
    s1= sb.toString();
    System.out.println(s1);
    //creation d un client ftp
    FtpClient client = new FtpClient();
    System.out.println("gggggggggggggalut");
    client.openServer(server,port);
    System.out.println("xxxxxxxxxxxxalut");
    client.login(user, passwd);
    client.binary();
    client.cd(s1);
    System.out.println("la taille de "+s1+" est "+taille+" octets");
    System.out.println("ssssssssssssalut");
    System.out.println(client.welcomeMsg);
    System.out.println("buhhhhhhhhhhhhh");
    //copie du chemin saisi par l utilisateur
    String chemre;
    cfbis = new ConnFile("d:\\cni\\chemin.txt");
    String chemvir = cfbis.lectureid();
    System.out.println(chemvir);
    if (chemvir==null)
    chemre="d:\\";
    System.out.println(chemre);
    else
    chemre=chemvir;
    System.out.println(chemre);
    String chem=chemre+"\\"+s2;
    System.out.println(chem);
    //pour creer le nouveau fichier
    TelnetInputStream fich = client.get(s2);
    FileOutputStream out = new FileOutputStream(chem);
    //pour ecrire dans le nouveau fichier
    int i;
    while(true)
    i = fich.read();
    if(i == -1)
    { break; }
    out.write((byte)i);
    System.out.println("bahhhhhhhhhhhh");
    //fermeture du serveur ftp
    client.closeServer();
    System.out.println("ok");
    }//fin while
    String chemvir = cfbis.lectureid();
    }//fin du try
    catch(IOException e)
    System.out.println(e);
    }//fin du main
    }// fin de la classe
    do you know how

  • How to check client size in SAP

    Hi All,
    I would like to check the size of production client so i can do system refresh to QA. I need to know how to check client size only not database size.
    Regards
    Atul-

    Hi
    Yes, there is a report called YSTABSIZ which can calculate the size of the client.
    1. Login to the target client ( for which the client size to be calculated)
    2. Run SE38 , execute YSTABSIZ by selecting the table *
    3. Execute the report in background
    Once the client is deleted, the space which is free can be used to fill in with newly added data
    but if you want to see the actual space reduction in DB02,it can be acheived only with DB reorganization
    OSS notes 118823 and  for this purpose
    Hope ths helps
    Please reward points
    Sunil

  • I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

    I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

    What do you mean a moderator

  • How to know the size of bad sector block after zero out erase?

    I found some problems on my USB external harddisk recently. After I backup all the files, I erased the whole volume by choosing "zero out data" option. According to some web articles, "zero out" detects and marks those bad sectors to avoid further read/write action on the damaged area.
    My question is that how can I know the size of disk space marked as bad sector? Because I can only see how many space is used or available when I check a disk in disk utility. There are about 600MB used for my 1TB hard drive. I guess there is some storage used by spotlight or other hidden files. But I have no idea for how many MB is occupied by bad sector...

    Yes you can look at see the original number of spares, the number used, and the number remaining spares.
    Disk Warrior for one, writes the SMART data to system.log Other programs can also read and report (not sure which if any write to system.log though) those field values from SMART table entries.
    IF the number of spares is declining, time to replace. Trouble is OS X hasn't had a good record of reporting I/O errors, let alone remapping. Some 3rd party utilities will. I've found the vendor (WD, Hitachi etc) have the best utility for their own drives, but those are Windows programs or LinuxCD. Also the best way to zero and map out bad sectors, too.

  • How to know the size of a DATABASE ?

    Guys,
    How to know the size of a DB ?
    Also
    How to know the size of a TABLE ?
    How to get the content of a procedure/view/trigger ?
    Inputs are welcome !

    How to know the size of a DB ?If you want to know the physical size, query dba_data_files + dba_temp_files. if you need to know the actual consumed space in those files, compute sum of bytes from DBA_SEGMENTS.
    How to know the size of a TABLE ?Query all/dba/user_segments.
    How to get the content of a procedure/view/trigger ?all/dba/user_source, all/dba/user_views, all/dba/user_triggers.
    Message was edited by:
    Satish Kandi

  • How to create a Dynamic table without knowing fieldcat size

    Hi all, i'm trying to insert a (Jointer) of 3 selections form diffrent tables in an other dynamic table but i dont know the size of my final table, so i dont know how to create a fieldcatalog.
    Can we create an internal table with those caractiristics ????

    Hi,
    If you know which fields (ABAP Dictionary) you're selecting then you know their size; use the following FM call: DD_NAMETAB_TO_DDFIELDS
    Then you can use the following method to create your dynamic table: cl_alv_table_create=>create_dynamic_table
    Arash

  • How to know the size in bytes of a directory?

    I would like to know if there's a class or a function which allows to know the size of all files in a directory?

    You have to create a File object for your directory, then list all files (using the list() method) and create a File object for each item returned. Then ask each File object for it's size and add them up.
    Thomas

  • How to know the size of the EEPROM after loading any Applet

    How can I know the size of the EEPROM after loading any applet..
    Any comments on this is appreciated
    Thank you in advance

    kishansaralaya wrote:
    Thanks for your suggestion.
    But when I try to use
    short memRemaining = JCSystem.getAvailableMemory(JCSystem.MEMORY_TYPE_PERSISTENT);
    it always shows 32767. Even after loading some applet.
    And I am using 72K Java card then how it can show only 32Kbyte as the remaining memory value.This is because a short isn't big enough to display a number above 32767. One way around this is to use a byte[] to fill up some of the space with your temporary applet.
    byte[] memoryFiller = new byte[32767];
    short memRemaining = JCSystem.getAvailableMemory(JCSystem.MEMORY_TYPE_PERSISTENT);The value of memRemaining + 32767 is the amount of persistent memory left on the card. If memRemaining is still 32767, you can add another byte[] starting with small values and increase the size until you get a meaning ful result (less than 32K).

  • HT1752 Ineed a new lithium 3.6v battery for my G4. Do you know the size, and where to buy it? Thank you, Shaby.

    Hi, I need to change my old lithium battery 3.6v on my  G4.
    Do you know the size of this battery, and where to buy it on the web?
    Thank you. berdavid.

    You need to identify your PowerMac G4's specific model.
    Refer to these guides: http://www.ifixit.com/Device/Power_Mac

  • How can I know the size of DB Table

    Hi, Guys,
    1. How can I know the size of the DB Table in terms of kb
    2. If I delete some records from the Table, does the actual size of the Table remains  same or will it be reduced.
    3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
    thanks
    Mahesh

    Hi
    1. How can I know the size of the DB Table in terms of kb
    There is no precise method/tcode/program to know the Table size of a tables.
    Just based on the record size of a table(say for example 2kb), and if 200 records are there then, we roughly assume that it occupied 400 kb.
    All the tables are stored in Table spaces.
    2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
    Time being it remains same. it won't get reduced immediately
    during some next DB reorganisation it gets reorganised by reducing it.
    3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
    during next DB reorganisation it gets reorganised by reducing it.
    Reward points if useful
    Regards
    Anji

  • How can I know the size of a JViewport laid out in BorderLayout.CENTER?

    I have a JPanel inside a JScrollPane. The scroll pane is laid out inside of BorderLayout.CENTER. I need to know the size of the JViewport to do stuff like centering and zooming.
    Where can I find the size? All these methods return 0 values for X and Y:
    myScrollPane.getViewport().getSize()
    myScrollPane().getSize()
    myScrollPane.getHorizontalScrollbar().getValue()
    Yes, even the scrollbars won't give me any values! It's all because of the BorderLayout!
    Any ideas? Thanks.

    Sounds like you are accessing the sizes before the views are realized (that is before a call to frame.pack()/show()) They are available only after the layoutManager had a go on it. What is available earlier are preferred/min/max, though.
    Greetings
    Jeanette

Maybe you are looking for