To read value of name1 to eh_onsave and also to make uitility class.

Hi,
My requirement is to read (get) the value of name1(bp_head, bphead/account details,header,name1) to eh_onsave.
Please suggest me to achieve this through iv_relation_name.
I have written select statement in eh_onsave,they suggested to make utility class and call the method of that utility class to get values.
How to to achieve this .
Regards,
Kishore.

Hi,
EH_ONSAVE method is in BPHEADOverview which has a context node BuilHeader bound to component controller context node PARTNER. You can directly read name1 from BUILHEADER, not necessary to use iv_relation_name. Use the below sample code in eh_onsave method,
data: lr_ent       type ref to cl_crm_bol_entity,
         lv_name1 type string.
    lr_ent ?= me->typed_context->builheader->collection_wrapper->get_current( ).
    lv_name = lr_ent ->get_property_as_string( iv_attr_name = 'NAME1' ).
Regards,
Arun

Similar Messages

Same Execution plan But different consistent read values

hi,
my db version 10.2.0.3
os version solaris 10.
i have a query which has same execution plan but with diffrenet consistent read values when optimizer_mode is RULE and CHOOSE.
what may be the cause of that?
thanks,
Here is the query:
SELECT *
FROM XXX
WHERE id = 4567
RULE based:
| Id | Operation | Name |
| 0 | SELECT STATEMENT | |
| 1 | TABLE ACCESS BY INDEX ROWID| XXX|
| 2 | INDEX RANGE SCAN | XXX_INX_ID |
Note
- 'PLAN_TABLE' is old version
- rule based optimizer used (consider using cbo)
Statistics
1 recursive calls
0 db block gets
5 consistent gets
0 physical reads
0 redo size
1973 bytes sent via SQL*Net to client
492 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
COST Based:
| Id | Operation | Name | Rows | Bytes | Co
st (%CPU)|
| 0 | SELECT STATEMENT | | 1 | 107 |
4 (0)|
| 1 | TABLE ACCESS BY INDEX ROWID| APPOINTMENT | 1 | 107 |
4 (0)|
| 2 | INDEX RANGE SCAN | APPO_INX_MASTERAPPOID | 1 | |
3 (0)|
Note
- 'PLAN_TABLE' is old version
Statistics
0 recursive calls
0 db block gets
48120 consistent gets
0 physical reads
0 redo size
1973 bytes sent via SQL*Net to client
492 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed

873792 wrote:
hi,
my db version 10.2.0.3
RULE based:
The Rule Based Optimizer is NOT supported for V10+

How to read values from DMM4040

Hi,
I am using DMM4040, NI PXI 6509 device.
I need to make some port pins high which i have already done and now i have to read value captured by DMM then i have to make my port pins low if my value is within limits.
Can u suggest me how to read values from DMM and then by notification i ll make my port pins low.
'' A professional is someone who can do his best work when he doesn't feel like it''...........

What language are you using? If using LabVIEW, you use the NI-DMM API to communicate with the 4040. Just take your reading, do your limit comparison, and set your lines based on the comparison results.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Reading values from properties file

Hi All,
I am in need of a help from you all.I have a login.jsp which gets username and password as user input and checks in the servlet that if it was admin and admin it will take to index.jsp and if it was other than admin and other users it should take to index1.jsp.For now i am using an if condition to check the values and to dispatch the request.I need to use a properties file for this and need to check by getting the values from the properties file.And also it should check for each entry in properties file and if it finds any matches it should take to the corresponding page.
Please help me in achieving this.
Thanks,
laxmi

Hi All,
I am in need of a help from you all.I have a login.jsp which gets username and password as user input and checks in the servlet that if it was admin and admin it will take to index.jsp and if it was other than admin and other users it should take to index1.jsp.For now i am using an if condition to check the values and to dispatch the request.I need to use a properties file for this and need to check by getting the values from the properties file.And also it should check for each entry in properties file and if it finds any matches it should take to the corresponding page.
Please help me in achieving this.
Thanks,
laxmi

Captions of photos in Yahoo cover the bottom part of pic. Makes it hard to read text and also can't see whole photo. Tried reset Firefox but that didn't work.

When going through photo galleries on Yahoo (in news, omg, etc.) the caption is displayed on top of the bottom 'fifth' of the photo. (The caption should be below the entire photo.) The way the pations are overlayed makes it difficult to read the text of the caption and worse, it makes it almost impossible to see the lower fifth of the photo. I tried resetting Firefox but that didn't change anything. I can't find any yahoo settings or OS X display setting that changed this. I'm using Firefox 25 on a macbook air running OS X 10. Are there any firefox settings that would improve this? Thanks.

You can also try to reset the page zoom on pages that cause problems.
*View > Zoom > Reset (Ctrl+0 (zero); Command+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Read values from Adobe Interactive Form inside the webdynpro

Hello,
I have problems to read the values of the fields inside de adobe. I read an article on saptechincal that told:
You can see the Adobe form that we have designed, enter the data as shown below and press the submit button. (As I said earlier an activex control will be installed on to the client machine, you can see the activex control in the internet explore go to the menu: ToolsàInternet optionsàgo to the programs tab àPress button Manage add-ons.
You can see an activex control named u2018SAP ACFu2019, if you donu2019t have this control you will not see this page: Note you need to have adobe acrobat reader 7.1 installed, I have used version 9, the activex control was not working properly so down graded my adobe reader to 7.1)
This is true ??? I have the Acrobat reader 9.3 and i saw that also have the SAP ACF installed.
The value of the property displaytype on adobe interactive form on webdynpro is activeX or native.
Thank you in advance.

Hi,

Thank you for the answer.

I change the value of the attribute but again i can read anything from the adobe form. So let me explain what i'm doing.

Objective: I have to create one webdynpro with an adobe interactive form for create new clients on r/3 system.

1. I create de the view with 2 elements an interactive form and one submit button.

2. Create the context of the view with the following tree:

> context (node)

 > ADOBE_DATA (node)

 > Clients (from KNA1 table) (node)

 > KUNNR

 > LAND1

 > NAME1

 > ORTO1

 > TELF1

>PDF_SOURCE

3. Complementing the properties of the interactive form:
datasource = clients node of the context
displaytype = native
pdf_source = pdf_source attribute of the context
templatesource = name of the form

4. Create the form, and add the data source to the interface of the form

5. On the form bulider i add and subform on the hierarchy tab and the all the fields of the interface to the form and
automatically the value of the fields are binding.

6.Add a submit button from web dynpro native and add the event click to the button. Then i change the value of the layout type and save e activate the form and the interface

7. The next step is create an action for the button submit for the event "onSubmit". So i create the function and start coding this code:

DATA: adobe_node TYPE REF TO if_wd_context_node,

 client_node TYPE REF TO if_wd_context_node,

 client_element TYPE REF TO if_wd_context_element,

 client TYPE if_create_client=>element_clients.

*Get reference to the adobe_data node from the context

adobe_node = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).

*Get reference to the clients node from the context

client_node = adobe_node->get_child_node( name = wd_this->wdctx_clients ).

*Get element node

client_element = client_node->get_element( ).

*Get the values from the form

client_element->get_static_attributes(

 IMPORTING

 static_attributes = client ).

8. Then for finalize i add the view to the window and crate a web dynpro application and put one break point on the submit function event.

9. Activate and test the application and when the program try to add a reference to the element node always returning a null reference and the application dumped.

So please help with this situation i can't understand what is the mistake.

PS: Now i have installed the acrobat reader 7.0.8

Edited by: miglsilva on Sep 4, 2010 5:50 PM
Edited by: miglsilva on Sep 4, 2010 6:01 PM

Reading values from standard report in custom report dynamically

Hello Gurus,
I have a strange requirement, We have some standard reports which displays output in drop down blocked data. I want to create a custom report which will get that data in my internal tables.
Just to elaborate this requirement, I will give you a example:
I have a standard report which output as first line 'A' and second line as 'B'. Now when I press drop down in 'A', it displays line items say 1,2,3,4,5.... Similarly block 'B' once when pressed displays line items 6,7,8,9,10.
Here I want a custom report which directly read data from this standard report and gives us the values of line items 1,2,3,4,5 in one internal table and similarly items 6,7,8,9,10 in another internal table.
Hope the question clarifies the requirement now.
Request you to please provide the resolution.
Thanks,
Harjeet

Hi Harjeet,
Use sumit statement for standard program and export the list to memory. and then read list from memory and use in your custom program.
Use below code for reference.
DATA: t_list TYPE abaplist OCCURS 0.
SUBMIT rfdopr10
                ************** your options
                AND RETURN
                EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = t_list
EXCEPTIONS
    NOT_FOUND        = 1
    OTHERS           = 2.
BR,
Vijay

Reading values from lookup columns through custom workflow in SharePoint 2013

We are able to read the values of text, number columns through custom workflow (via coding) in SharePoint 2013. However, we are not able to read values from lookup columns. So, request anyone to provide help on this.
Thanks & regards,
Aditya

Hi,
According to your post, my understanding is that you want to read values from lookup columns through custom workflow in SharePoint 2013.
Since the workflow just doesn't get lookup fields, let's give it something static to work with instead. If we can capture the ID of the lookup field and store that as a static value in our list, the workflow can happily use that to look up our related.
For more information, you can refer to:
SharePoint 2013 Workflows and Lookup Columns
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Reading values from JTable

I have som problems reading the values from JTable. the user enters a number in the table, but some cells are empty. I want to store the values in an int array, and if the user has not filled a cell it is supposed to be set as zero. Now I cant seam to get it right.
I get the error message: Exception in thread "AWT-EventQueue-0" java.lang.NumberFormatException: null
It is for the code. Integer intObj = new Integer(str);[/u
int[] tmp = new int[brettStorelse * brettStorelse];
for (int i = 0; i < brettStorelse; i++) {
 for (int j = 0; j < brettStorelse;j++) {
 String k = String.valueOf(j+i);
 int l = Integer.parseInt(k);
 if (sudokuTabell.getValueAt(i, j) != null) {
 String str = (String) sudokuTabell.getValueAt(i+1, j+1);
 Integer intObj = new Integer(str);
 tmp[l] = intObj.intValue();
 System.out.println(tmp[l]);
 } else {
 tmp[l] = 0;

What are you doing to prevent the user from entering values in the table that are not parseable? Seems like you should be doing the below.
int[] tmp = new int[brettStorelse * brettStorelse];
for (int i = 0; i < brettStorelse; i++) {
 for (int j = 0; j < brettStorelse;j++) {
 String k = String.valueOf(j+i);
 int l = Integer.parseInt(k);
 if (sudokuTabell.getValueAt(i, j) != null) {
 String str = (String) sudokuTabell.getValueAt(i+1, j+1);
 try {
 tmp[l] = Integer.parseInt (str);
 catch (NumberFormatException e){
 tmp[l] = 0;
 System.out.println(tmp[l]);
 } else {
 tmp[l] = 0;
}

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online   Right now there is no app store for

Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online
Right now there is no app store for Filemaker Go.   Filemaker Forgot about us.
So I want to create a simple native iPhone App that all it does
is launch
fmp://~/filename.fmp12?$VariableName=value
This URL will launch the Filemaker Go App
Filemaker Go is a app that the user will have to have
downloaded already on the device..
The Simple Native app will launch the Filemaker Go.
The fmp URL has the information where the Filemaker Pro database is hosted
and get the user where they need to be..
Help Me please
iPhone 5s, iOS 8.1.3

That would be software. And, you said "upload." That's "uploading software." Why do you question what you stated?
I don't know where you even want to upload this software. The only way it can be downloaded to a device is through the iTunes store. Do you even know what you want to do?

NLS_LANG value that suits Forms 10G and Database 11G wanted !

I can't believe how bad is to install Oracle Database and Oracle Forms on the same Windows Vista machine!
I had a problem in Oracle Forms 10g that prevents many items in the Form Builder menu from appearing in English Language and also prevents anything in the web-based forms runtime from appearing in English. I searched the forum for a solution and found that I have to set a NLS_LANG value in the environment variables equal to the following: AMERICAN_AMERICA.WE8MSWIN1256.
I did this and my Forms builder looked great. Everything in english with no problems. But now what ?! The Oracle Database itself refused to connect from all clients! It refused to connect from Forms Builder, SQL Deeveloper, and even from SQL PLUS! The error given is: ORA-12705: Cannot access NLS data files or invalid environment specified.
It seems that what I exactly need is a NLS_LANG value that will satisfy both Oracle Forms 10G and Oracle Database 11G that both are installed on the same Vista machine. The question is: What could this NLS_LANG value be?!
Thank you in advance

If you have connected to the database on which the form is based, prior to running the form from the Builder, the uname and password will automatically be passed in at startup and you will not be prompted.
If you would rather hard code a username and password, enter it in formsweb.cfg. For example:
SYNTAX:
userid=<USERNAME>/<PASSWORD>@<DB NAME>
EXAMPLE:
userid=scott/tiger@orcl
Remember that this change will only impact runtime and have no effect on the Builder.

Why do I keep getting an error message that reads "The URL is not valid and cannot be loaded."

Whenever I click on a link that opens a new tab using "about:tab", an error pops up. The error box is titled "Alert" and the message reads "The URL is not valid and cannot be loaded."
However, once I click OK, the page loads just fine. At first, I thought it might be one of my add-ons (Iuse a bunch), but it still occurs after restarting in Safe Mode. Any thoughts?
I can even create the problem without clicking on a link inside a page if I simply type about:tab in the address bar.
I am using Firefox 12.0

Wow! I actually solved this on my own. I didn't find any thread that helped, but after reading a few, I figured poking around in about.config would help... and it did!
Here is how I solved the problem:
# Typed '''about:config''' in address bar.
# When I got to the warning about voiding the warranty, clicked '''I'll be careful, I promise!'''
# I found the setting entitled '''browser.newtabl.url''' (use the '''Search:''' box).
# I double-clicked on the entry entitled '''browser.newtabl.url''' and deleted the info in the value portion.
# Clicked '''OK'''.
# Closed the tab.
# Restarted Firefox and problem was solved.

On basis of drop down by key values i want to enable and disable ui elements is wda

How to enable and disable ui elements on basis of drop down by key values as i show in screen shot i have 3 values in drop down by key on basis of those values i need to enable and disable ui elements in webdynpro abap kindly reply back

Hi Sreedhara,
There are many tutorials on SCN for learning Web Dynpro ABAP. If the following steps don't make sense to you, please do a search for some tutorials and read through the tutorial materials. Hopefully the tutorials will help you to become familiar with some of the basics of Web Dynpro ABAP.
Here is how to enable or disable a UI element upon selection from a DropDownByKey.
In your view context, create a context attribute of type wdy_boolean. For now, let's call this attribute IS_ENABLED
In your view layout, bind the enabled property of the UI element to the context attribute IS_ENABLED.
In your view actions, create an action-- let's call it SET_ENABLED-- and bind this action to the DropDownByKey element's onSelect event in the view layout.
In the event handler method for the SET_ENABLED action, use the Code Wizard to read the value of the DropDownByKey selected value, then use the Code Wizard again to set the value of context attribute IS_ENABLED to either true or false.
Now when a value is selected from the DropDownByKey, the SET_ENABLED action will be triggered and the IS_ENABLED context attribute will be set to either true or false. Since your UI element's enabled property is bound to this true or false value via the context binding, the UI element will change to enabled or disabled.
Good luck!
Cheers,
Amy

WCF Service and Sharepoint Form library : How i can read a access a form libray and query a item from file name and read form xml in WCF service ?

WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
Ahsan Ranjha

Hi,
In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
SharePoint 2013 REST API
http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
SharePoint 2013 Client Object Model
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
Best regards
Patrick Liang
TechNet Community Support

To read value of name1 to eh_onsave and also to make uitility class.

Similar Messages

Maybe you are looking for