To use IP address as condition in TS

Wanna ask, is it possible if I want to use IP address range or subnet as the TS conditions? For example, I have a different site that is within a different ip range and would want to use only 1 Wipe and Load TS, therefore I would think to create each Apply
Windows Settings step for each site as each will use a different local admin password and set the condition based on the IP address/subnet.
Right now I am using WMI query (as below) to install some of my software on a specific machine model. Is it possible if I would want to do the same, using the WMI query to create a condition based on the IP address/subnet? FYI, im using TS without MDT integration.

No you can, set the dynamic variable at any time during your task sequence. What it actually does, I can use your picture as an example:
If computer default gateway is 123.255.124.214 then OSDLocalAdminPassword will be xxxxxxx
If computer default gateway is "255.255.255.244 then someothervariable is something else
Basically, you populate a value in to your OSDLocalAdmin task sequence variable, a variable that can now be used during the task sequence, again at some point.
If you want to change the local admin password based on the gateway, you just should use the dynamic variables step before you're using the OSDLocalAdminPassword -variable, or before the OSDLocalAdminPassword -variable is processed.

Similar Messages

How do I use multiple addresses at one time?

Shouldn't the Adobe server page that allows for the entry of a recipients address tell users how to add another address? Do we separate them with semicolons? Commas? Or is it even possible to use multiple addresses?

Yes, Adobe Send.
Unfortunately, it is NOT spelled out on the page where you enter email addresses of recipients, nor is it revealed if you click on the question mark box by email address.
Frank
=========================
Frank Schmalleger, Ph.D.
Distinguished Professor Emeritus
The University of North Carolina
Website: www.schmalleger.com
Amazon Author Page: http://tinyurl.com/78nly4s
Mailing Address:
Ste 203-332
4300 S. U.S. Hwy 1
Jupiter, FL 33477
Ph. 561.225.1760

I have an "old" Apple ID set up 13 years ago. Apple has now gone to using email address as the apple ID. I have apps to update and they ask for old ID. it does not exist. How can I get the ID on the app changed to the new apple ID

I set up an apple id many years ago when itunes was established. Within the past year or so, Apple has changed to using email address as user id. My problem is that I have many applications that I can not update due to the fact that it is asking for the password of the old ID. It does not exist anymore. Any ideas on how to get the new apple id associated with the application without deleting the application. Several of these apps I purchased.

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Can I use ip address and hostname to establish Site 2 Site VPN?

Is it possible to use both; hostname or ip address while trying to setup an ipsec tunnel?
The scenario we have is that there is a customer who has one central site and 10 remote sites. Each site exists for a period of 3 to 6 months and then the staff moves to another location as a result the router/firewall and other IT resources are moved too. This requires me to setup and tear down tunnels from the head office as well as remote sites. To avoid this, i was thinking of using dynamic DNS which would save me a lot of work. Is it possible that I can setup VPN tunnels by either method i.e. hostname and ip address or do I have to stick with any one method only? As a reference the command used to identify peers is
"isakmp identity {address | hostname}"
The firewall version is 7.0(5)

Hi,
If you want to use IP addresses also then you could probably configure dynamic L2L VPN connections so that even if the IP address etc of the remote site changes, it is able to connect to the central site without making any change on the central device. For the remote sites that have the static public IPs, you can create static L2L VPN connections.
HTH,
Please rate if helps,
Regards,
Kamal

I get an error trying to use Apple Address Book with Word Mail merge - says it cannot open data file?

I am running MS Word 2011, latest Mac OS, and trying to use the Mail Merge option with the Apple Address Book as the data source.
However whenever I select the Apple Address Book as the data source, I get the error "Word was unable to open the data source".
Anybody got any idea why?
Thanks for your help

I am guessing you could have solved this little problem already but perhaps someone else may benefit:
I struggled with the same problem - not being able to use Mac Address Book (i.e. Contacts) with Word 2013 for mac mail-merge (on Mountain Lion and, now, on Mavericks) - with the exact same error message reported by Klausngigtoas above .
So I read lots of techie stuff on forums which passed a nice few hours but didn't help. Finally, with slumped, defeated expression, I gave up.
But I just now (such is life) I accidentally stumbled upon the simple solution:
1. Enter System Preferences and click Security & Privacy.
2. Select the Privacy tab and then on Contacts on the left hand panel.
3. In the right hand panel ("Allow the apps below to access your contacts") just tick the Contacts box.
4. And Voilà! - at least it worked for me - hope it does for you.

Safari 7.0.2 Location bar will not stay open and I must use command L each time to with go back or use the address bar

Safari 7.2.2 loction bar wil not stay open and I must use command L to either go back or to use the address bar

View > Show Toolbar

How to use multiple addresses for a global vendor

Hi experts.
scnerios is.company has different plants in different countires.they have centrally agreed contract with vendor.now each plant create p,o is in different country how can we use that vendors local addresses in p.o because in vendor master we can define one addres at a time.so if that adrees is in other country.and plant creating p,o is in different how can select the local address of that vendor.
if option is partner function then how to use it.all adressess witl be odering address of that vendor.his offices is alll the counties.
thanks

IQBAL,
You can maintain multiple addresses for the same vendor using international addresses.
First, you have to Activate International Address Versions for each country/language via config at
IMG: Flexible Real Estate Management (RE-FX) > Address Management > International Settings > Activate International Address Versions (You can do this even if you are not using Real Estate Management
Then, in the vendor master, address screen, select the "International Verion" button, select the address version and maintain your address.
If you have any programs that need to display or print these addresses, you will have to specifiy the address version to display/print. by default, the version (Field = NATION) is Blank.
I hope this helps.

How to use i for if condition in a for i in loop?

Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!

user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

Can pricing requirement be used for manual header condition

I have a manual header condition ZCR1 which will be entered in a sales document with doc type ZAB1. When this sales document is copied into another sales document ZAB2, I want that the manual header condition ZCR1 is not determined. Can I do this via pricing requirement? Or should I use alternation formula for condition base value and make the value of condition ZCR1 to zero when the document is copied into ZAB2.
Both the document types are using the same pricing procedure. In copy control for all item categories from ZAB1 to ZAB2, pricing type G (Copy pricing elements unchanged and re-determine taxes). ZCR1 is a manual condition in the pricing procedure used.
Regards
Javed

Hi javed
If you want the ZCR1 manual header condition should not be determined then you need to change the pricing type in the copy control but if you assign a requirement in the pricing procedure for ZCR1 condition type then you cant enter the ZCR1 condition type manually also as you are not meeting your requirement.
Another option is you have to create a new requirement with the help of Technical consultant ans assign it to the header condition type in the pricing procedure requirement feild . giving inputs to your Technical consultant that The condition type should not be determined
Regards
Srinath

Using process variables in conditional transition

HI,
I am usin Oracle BPM 1.03
I wanto to have a value of a variable visible in the user's inbox. Therefore, I need to use project level variables.
I also want to use this variable in conditional tranistion, but the condition editor only allows Instance level variables.
Am I overlooking something? Is there an easy way to use project variable in conditional transtions?
Matej

you should be able to manually type the transition condition on the properties tab.
xArea == "MyArea"
where xArea is a Project Variable

How to invoke a web service asynchronously using ws-addressing model?

Hi Gurus,
We are invoking an external web service asynchronously using Oracle Work Flow Business events using the following mechanism -
1)Created a web service invoker event to invoke the web service.
2)Created a subscription that invokes the web service (provided the wsdl address, operation info).
3)Defined a subscription parameter WFBES_CALLBACK_EVENT with value pointing to a recieve event.
4)Created a receive event(parameter value for WFBES_CALLBACK_EVENT) and a subscription that directs the response to a custom PL/SQL function to process response.
so far so good. We were able to invoke the web service and get and process the response.
Problem: The external web service can take upto 10 hrs to process the request. A time out of 2 hrs is set on the server hosting the external web service. So when the external web service takes more than 2 hrs to process the request and it times out and we get the following error on EBS side -
'l_error_message:oracle.apps.fnd.wf.bes.InvokerException: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=iso-8859-1'
Now the external web service providers are suggesting that we are not calling their web service asynchronously and we should use ws-addressing model to do so.
Is there a way to invoke this web service using ws-addressing model using business events or from PL/SQL or OA middle-tier?
Regards,
Sunil
CMRO Development.
I am providing here the WSDL of the external web service -
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://service.sdk.webservices.enigma.com" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:ns1="http://org.apache.axis2/xsd" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:ax21="http://service.sdk.webservices.enigma.com/xsd" xmlns:ns="http://service.sdk.webservices.enigma.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://service.sdk.webservices.enigma.com/xsd" xmlns:ax22="http://service.sdk.webservices.enigma.com">
<xs:import namespace="http://service.sdk.webservices.enigma.com"/>
<xs:complexType name="JCGWebServicesException">
<xs:complexContent>
<xs:extension base="ax22:Exception">
<xs:sequence>
<xs:element minOccurs="0" name="id" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="message" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="JCGServiceReply">
<xs:sequence>
<xs:element maxOccurs="unbounded" minOccurs="0" name="pdfStatus" nillable="true" type="ax21:PdfStatus"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PdfStatus">
<xs:sequence>
<xs:element minOccurs="0" name="jobCardID" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="pdfPath" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="status" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://service.sdk.webservices.enigma.com" xmlns:ax23="http://service.sdk.webservices.enigma.com/xsd">
<xs:import namespace="http://service.sdk.webservices.enigma.com/xsd"/>
<xs:complexType name="Exception">
<xs:sequence>
<xs:element minOccurs="0" name="Exception" nillable="true" type="xs:anyType"/>
</xs:sequence>
</xs:complexType>
<xs:element name="JCGWebServicesException">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="JCGWebServicesException" nillable="true" type="ax21:JCGWebServicesException"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="runJobCard">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="a_WorkpackageFilePath" nillable="true" type="xs:string"/>
<xs:element minOccurs="0" name="a_userName" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="runJobCardResponse">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="return" nillable="true" type="ax21:JCGServiceReply"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</wsdl:types>
<wsdl:message name="JCGWebServicesException">
<wsdl:part name="parameters" element="ns:JCGWebServicesException">
</wsdl:part>
</wsdl:message>
<wsdl:message name="runJobCardResponse">
<wsdl:part name="parameters" element="ns:runJobCardResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="runJobCardRequest">
<wsdl:part name="parameters" element="ns:runJobCard">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="JCGServicePortType">
<wsdl:operation name="runJobCard">
<wsdl:input message="ns:runJobCardRequest" wsaw:Action="urn:runJobCard">
</wsdl:input>
<wsdl:output message="ns:runJobCardResponse" wsaw:Action="urn:runJobCardResponse">
</wsdl:output>
<wsdl:fault name="JCGWebServicesException" message="ns:JCGWebServicesException" wsaw:Action="urn:runJobCardJCGWebServicesException">
</wsdl:fault>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="JCGServiceSoap11Binding" type="ns:JCGServicePortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="runJobCard">
<soap:operation soapAction="urn:runJobCard" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="JCGWebServicesException">
<soap:fault name="JCGWebServicesException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:binding name="JCGServiceSoap12Binding" type="ns:JCGServicePortType">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="runJobCard">
<soap12:operation soapAction="urn:runJobCard" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
<wsdl:fault name="JCGWebServicesException">
<soap12:fault name="JCGWebServicesException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="JCGService">
<wsdl:port name="JCGServiceHttpSoap12Endpoint" binding="ns:JCGServiceSoap12Binding">
<soap12:address location="http://localhost:8080/JCG/services/JCGService"/>
</wsdl:port>
<wsdl:port name="JCGServiceHttpSoap11Endpoint" binding="ns:JCGServiceSoap11Binding">
<soap:address location="http://localhost:8080/JCG/services/JCGService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Edited by: sikumar on Jun 22, 2010 1:50 PM

Bharat,
You dont need a Business Event setup to invoke a BPEL process from PL/SQL unless you have a special case and you need to process the response from the BPEL process in a separate thread (or in background)..
For a straight call to BPEL process from PL/SQL, here is a sample script -
function "MYTEST0" return varchar2 AS
soap_request varchar2(30000);
soap_respond varchar2(30000);
http_req utl_http.req;
http_resp utl_http.resp;
resp XMLType;
i integer;
helpStr varchar2(30000);
BEGIN
soap_request:= '<?xml version = ''1.0'' encoding = ''UTF-8''?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="
http://xmlns.oracle.com/TestWS">
<env:Body>
<ns0:TestWSProcessRequest>
<ns0:input>abc</ns0:input>
</ns0:TestWSProcessRequest>
</env:Body>
</env:Envelope>
/* the BPEL process name is TestWS */
http_req:= utl_http.begin_request
( 'http://hostname:7777/orabpel/default/TestWS/1.0'
, 'POST'
, 'HTTP/1.1'
utl_http.set_header(http_req, 'Content-Type', 'text/xml');
utl_http.set_header(http_req, 'Content-Length', length(soap_request));
utl_http.set_header(http_req, 'SOAPAction', 'process');
utl_http.write_text(http_req, soap_request);
http_resp:= utl_http.get_response(http_req);
utl_http.read_text(http_resp, soap_respond);
utl_http.end_response(http_resp);
resp:= XMLType.createXML(soap_respond);
resp:= resp.extract('/soap:Envelope/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"');
helpStr := '';
i:=0;
loop
helpStr := helpStr || substr(soap_respond,1+ i*255,250);
i:= i+1;
if i*250> length(soap_respond)
then
exit;
end if;
end loop;
return helpStr;
END;

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

Message on WCS/NCS: Attempted to use IP Address assigned to another device

Hi
i have two WLCs AIR-CT5508-K9, monitored by WCS (in retiring stage) and NCS.
All APs are grouped in HREAP groups based on their locations. The wireless users are getting ip from a dhcp pool running on routers located at each site. All dhcp commands on every routers are the identical. Eg. rtr1, located on site 1 has ip pool for wifi users 192.168.8.0/24. Rtr2 on site 2 has a ip pool for wifi users in range 192.168.8.0/24. Occasionally i am getting bellow message when some wifi users are unable to connect. After creating a HREAP group and associating APs to correct group, this message stops showing for a while but now i am getting them again.
The temp solution to get it all running is to clear ip dhcp pool on router located at affected site.
Any suggestions for a better solution?
Thanks
====================
NCS has detected one or more alarms of category Security and severity Minor in Virtual Domain ROOT-DOMAIN
for the following items:
1. Message: Client '14:5a:05:6c:75:37 (0.0.0.0)' which was associated with interface '802.11b/g/n' of AP 'STV-AP-7198' is excluded. The reason code is '3(Attempted to use IP Address assigned to another device)'. - Controller Name: GEORGE-WLC
===================

endpoint,
You are locally switching your networks, yes, but even without HREAP and WLCs, they are still connected networks in your overall topology, correct? I would never have site A with a given network that overlaps with a network in site B. With few exceptions, they should be completely separate, unique, non-overlapping network spaces. HREAP doesn’t even come into it.
The problem you’re likely having is that the WLC is seeing clients coming in from two different sites and because you are duplicating your configurations from site to site, the WLC sees duplicate IP assignment.
That said, you can try to turn off client IP address learning on the WLAN Advanced tab to see if that helps.
Justin

How to use complex function as condition in Oracle Rule Decision Table?

How to use complex function as condition in Oracle Rule Decision Table?
We want to compare an incoming date range with the date defined in the rules. This date comparison is based on the input date in the fact & the date as defined for each rule. Can this be done in a decision table?

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

blank values using Global Address Cleanse Transform

Hi,
We are trying to cleanse Global Addresses using Global Address cleanse transform. (with USA and Global Engines). We are passing Locality, Region and Postal code as multiline items. In the output some of the records are not getting populated. For these records if we keep USA as defult country then the fields are getting populated. The problem is we cannot take USA as defult country because it has global addresses and for other countries also it is filling USA as country name. Why is it that without giving USA as default country the fields are not getting populated for some records?
Below are some of the sample addresses.
1)     10 INDUSTR. HWY MS6     LESTER     PA     19029
2)     PO BOX_22964     JACKSON     MS     39225
3)     306 EASTMAN     GREENWOOD     MS     38930
4)     3844 W NORTHSIDE DR     JACKSON     MS     39209
5)     259 W QIANJIANG RD     ZHEJIANG     CN     31440
Can you please suggest a way to fill the countries for these addresses? Any inputs on this will be appreciated.
regards,
Madhavi

Hi,
As Lance indicates, you set up your address cleanse (for US I would suggest using the URAC transform) and map in your input fields as normal. In the output, you will select to output postcode2 along with all the other standardized fields you want posted in the output.
Note: If an address is assignable using the CASS rules established by the USPS to the USPS referential data, the postcode2 will be populated. In cases where it is not assignable, the postcode2 can be empty or the input postcode2 data could be preserved based on a user's settings.
Thanks,
Paula

To use IP address as condition in TS

Similar Messages

Maybe you are looking for