"To view the full contents of this document..."

Hi All,
I am working on a PDF parser and while parsing PDF file I am able to parse the document catalog & cross reference table but when it comes to content I get a message
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
as the content of the file I am unable to understand why it happens. I have checked the same with Sumatra PDF and it is also showing the same result. Could anyone can help me out in parsing the correct content of the PDF?
Please see the sample PDF @ following link:
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0BzErSc5prXZhNDg2OWI1OWU tZDg3ZS00ZDJhLThmMTgtN2YyNzBjZGZlZWVj&hl=en
You can also download the PDF by File -> Download Original
Thanks,
Pankaj

Hi lrosenth,
Yes your are right the PDF has XFA information and I am able to get all of the XFA information but I got suck in it. When I was trying to get the XFA information I got in an indirect object which is as follows:
52 0
<</XFA [
(preamble) 7 0 R
(config) 8 0 R
(template) 9 0 R
(PDFSecurity) 10 0 R
(localeSet) 11 0 R
(xmpmeta) 12 0 R
(xfdf) 13 0 R
(postamble) 14 0 R
/Fields []
/DA (/Helv 0 Tf 0 g )
/DR
<</Font << /TimesNewRomanPS-BoldMT 21 0 R
/Arial-BoldMT 22 0 R
/Arial-BoldItalicMT 23 0 R
/AdobePiStd 24 0 R
/TimesNewRomanPSMT 25 0 R
/Helv 26 0 R
/MyriadPro-Regular 27 0 R>>>>
/NeedAppearances false
/SigFlags 2>>
Here you can see there are no fields so, could you please suggest me what should be done in this case when you do not have field references then how could to parse rest of the file?
Thanks,
Pankaj

Similar Messages

Hi, on the link below, I need to open the "demande de visa de resident temporaire" but once I click on it it gives me the following message: " To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the

hi, on the link below, I need to open the "demande de visa de resident temporaire" but once I click on it it gives me the following message: " To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html For further support, go to www.adobe.com/support/products/acrreader.html".
the link is: http://www.cic.gc.ca/francais/information/demandes/visa.asp?countrySelect=RO#applications
can someone please help me? I've tried installing everything as per the indication in the message but I still get that error message.

update your adobe reader here, http://get.adobe.com/reader/
untick unwanted tag-along ware.

To view the full contents of this document, you need a later version of the PDF viewer

I Have upgraded to the latest version available in the App Store so why am I still getting this message when I try to open up PDFs?
To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html For further support, go to www.adobe.com/support/products/acrreader.html

Hi,
It sounds like you have a special type of form called a "dynamic XFA form".
Currently, Adobe Reader mobile products (Reader for iOS, Android, Windows Phone) do not support dynamic XFA forms that are authored with Adobe LiveCycle Designer.
The message is displayed when a dynamic content is not supported by a PDF viewer. As far as I know, no PDF viewers on iOS support dynamic XFA forms.
Please use the desktop version of Adobe Reader on a Windows or Mac computer to view and fill out XFA forms.
Sorry for the inconvenience.

I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I cannot view the full page when i open my book, how can this be fixed?

I downloaded some ebooks and i have them as e-pub files. However when i try to open them, i cannot view the full pages. There is also no zooming options for me to be able to do that.

This forum is for eMac computers which were built between 2002 and 2005. What do you have?
Choose your forum from this page.
https://discussions.apple.com/index.jspa?

How to view the full mapping path from source to final tables?

hi,
i would like to know if there is a way to view the full path from the source tables through the views / staging tables to the final target tables?
i need to check out a mapping, and i would like how i could make a report where i could see the data flow from beginning to the very end for one particular final target table?
is this possible or i have to do this manually?
thanks in advance for any tips
rgds

Hi,
Try this
In OWB go to your destination Table
ex. My Project >>Database>>Oracle>> MyDW >> Table >> DimDepartment
Then right click and choose
Linage >> for see the previous
Impact >> for see the next
it doesn't different from linage and impact.
ps. i use this in 10g ,i don't know it will be work on 11g?
It's May be you help you.
i'm asian ,so sorry about my english language.
Thank you
Regard

How can i view the full text of a query??

I must view the full text of several queries. I use the v$sqltext and v$sql, but i can´t view the full text.
Do you know any method to do this??
Thanks a lot!

set serveroutput on size 50000
set linesize 1000
set echo off feed off veri off
accept 1 prompt 'Enter Sql ID: '
set serverout on size 1000000
declare
my_var long;
begin
for x in ( select sql_fulltext from v$sqlarea where sql_id = '&1')
loop
my_var := dbms_lob.substr( x.sql_fulltext, 32000, 1 );
dbms_output.put_line(my_var);
end loop;
end;
/

Autho Error when viewing the message content in RWB (msg moni)

Hi
i get the below message when try to view the message content in message monitoring
" 403 Forbidden
You are not authorized to view the requested resource."
have the following roles added to my login in xi:
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_XI_ADMINISTRATOR_ABAP
SAP_XI_ADMINISTRATOR_J2EE
SAP_XI_CONFIGURATOR_ABAP
SAP_XI_CONFIGURATOR_J2EE
SAP_XI_CONTENT_ORGANIZER_ABAP
SAP_XI_CONTENT_ORGANIZER_J2EE
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
*SAP_XI_ID_SERV_USER
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
here *SAP_XI_ID_SERV_USER is in RED.
pls help in troubleshooting this issue on autho
thkx
Prabhu

i get the below message when try to view the message content in message monitoring
" 403 Forbidden
You are not authorized to view the requested resource."
we have a note for this problem...check it out:
https://service.sap.com/sap/support/notes/796726
Regards,
Abhishek.

Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

I am having trouble viewing the entire content of a PDF opened with adobe reader on my ipad.

I am having trouble viewing the entire content of a PDF opened with adobe reader on my ipad. Mi am able to view the file in its entirety on my Mac but not on my ipad. I have tried saving it to acrobat but that doesn't work either. Any suggestions please.

Hi,
When you say the entire content, do you mean some parts of the pdf are not getting displayed or is it going out of the screen?
Please send a pdf you are having issues with on chmaheshatadobedotcom, it will help us investigating the problem.
-Charu

The full content of my email messages are no longer downloaded

I can see everything except the full content of the mail ???
can anybody help me what is suddenly happening?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can any one tell me what is the full form of this?

hi,
i am runing the SQL Trace in to the database for the session. and i run the query as :
PARSING IN CURSOR #20 len=75 dep=0 uid=58 oct=3 lid=58 tim=14339580839 hv=4009215815 ad='685d5708'
SELECT EMP_NO
FROM EMP WHERE EMP_NAME = :1
END OF STMT
PARSE #20:c=0,e=492,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=14339580833
EXEC #20:c=15625,e=3248,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=14339596641
FETCH #20:c=0,e=226,p=0,cr=15,cu=0,mis=0,r=0,dep=0,og=1,tim=14339599490
what are the full form of this. What i know is this
c---number of times OCI procedure was executed
e---elapsed time in seconds executing
cr--number of buffers gotten in current mode (usually for update)
r---number of rows processed by the fetch or execute call
cu-cpu time in seconds executing
this are the correct. if wrong can anyone tell me what is the full form of this above statement

c = the total CPU time consumed by the Oracle process during the call
e = amount of wall time elapsed during the call
cr = number of Oracle database blocks obtained by the call in consistent mode from buffer cache.
r = number of rows processed.

Some of the the type layers in this document were rasterized

We have Adobe Photoshop CS4 Extended.
Recently one of the documents we created came up with this error:
Some of the the type layers in this document were rasterized because an error prevented them from being read.
We aren't using any fancy font in the document, just Lucida Sans
I found one discussion with a similar issue that was caused by the Suitcase Fusion 3 add-on, and resolved when they updated that add-on. However, we do not have said add-on activated in our Photoshop.
Can anyone help us figure out what happened so we won't run across this problem again?
Zane B Stein

I still haven't received a reply on this forum, over a year later.
We ended up redoing the document again from scratch.
We just received the error again with a new document, this time a much more time-consuming document to set up. The only font however is Arial.
We have Windows 7, 32-bit, Adobe Photoshop CS4 Extended, all adobe products on the computer have the latest update.
What can we do to avoid the error, "
Some of the the type layers in this document were rasterized because an error prevented them from being read."?
Zane

I recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

i recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

So it is cutting off the end at 59 minutes? How large is the file that is being exported? You may be running up against a file size limitation.

How to view the file content from the directory? getting Error:ORA-21560

SQL> create directory READ_LOB_DIR as 'D:\Prj\Comm\Data';
CREATE OR REPLACE Procedure READ_FILE_LOB IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(500);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_seb, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
l_sum := l_end - l_pos - 1;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
The Text file content is...
Copyright 1996,2001 Oracle Corporation.     All Rights Reserved
This file contains installation instructions for installing the
Oracle8 ODBC Driver software.
It is divided into four parts:
o Part I: Summary of systems supported by Oracle8 ODBC client
software
Lists the platforms on which the Oracle8 ODBC Client software can
be installed.
o Part II: Oracle8 ODBC Driver software.
Describes the files, and installation prerequisites for the Oracle8
ODBC driver software.
o Part III: Exploding the kit onto your system
Describes how to explode the kit onto your system hard drive.
o Part IV: Installation Instructions
Describes how to install the Oracle8 ODBC driver.
Part I: Systems supported by the Oracle8 client software
You can install the ODBC client software on any of the following systems:
o Windows 2000
o Windows NT X86
o Windows 95
o Windows 98
The Oracle8 ODBC Driver provides support for ODBC connections
from Windows 2000, Windows NT, Windows 95, and Windows 98 systems
to Oracle databases.
o Part II: Oracle8 ODBC Driver software.
Refer to the following files for information about the Oracle8 ODBC Driver:
LICENSE.TXT - Oracle8 ODBC Driver License Agreement. Read carefully
before installing and/or using this product. Enclosed in
your software distribution kit.
SQORA.HLP - A Window's Help file which is the primary reference
          manual for the Oracle8 ODBC Driver.
ODBCRelnotes.WRI - The release notes for the Oracle8 ODBC Driver
which contains information which may have not been
included in the Help file.
Installation Prerequisites
See the Oracle8 ODBC Driver release notes (ODBCRelnotes.WRI),
for a complete list of software products required and their versions.
Time Required
The installation of the Oracle8 ODBC Driver takes approximately 5
minutes. The actual time may be shorter or longer, depending upon
your hardware configuration.
Disk Space Required
The Oracle8 ODBC driver installation requires approximately 2
megabytes of available storage space. The space required depends upon
what files you already have installed. The installation procedure
checks to see if you have enough available disk space. If you do not,
the installation fails.
Part III: Exploding the Kit onto your system
Expand the self-extracting archive file onto your hard drive.
C:\> ORA8174.EXE
Part IV: Installation Instructions
Oracle8 ODBC Driver 8.1.7.4.0
This section assumes the following:
1. MS Windows 2000, Windows NT, Windows 95 or Windows 98 is running.
2. Oracle Universal Installer shipping with 8.1.7 has already been
installed on your system.
3. Part III has been completed.
Software fixes:
Refer to release notes (ODBCRelnotes.wri) for a complete list of
Software fixes.
Installation Instructions
Once the self-extracting archive file ORA8174.EXE has been
exploded it will create an installable directory structure
onto your hard drive. Run the Oracle Universal Installer from
your local drive.
1. On the screen "File Locations" use the "Browse" button of
the source path to choose the file 'products.jar' from the
folder that ORA8174.EXE was extracted to. Choose 'Next'.
2. You will receive a warning that some of the dependencies of
this product are not found in the staging area. This warning
is OK. The ODBC driver depends on the Net8 Client being already
installed on the system. Answer 'Yes' to continue.
Oracle is a registered trademark of Oracle Corporation.
Microsoft, MS are registered trademarks of Microsoft Corporation.
Microsoft Windows, Windows NT, Windows 95, Windows 98 and Open Database
Connectivity are trademarks of Microsoft Corporation.
All other trademarks and registered trademarks are the property
of their respective owners.
The output was...
File testfile.txt in Directory READ_LOB_DIR exists
Copyright
1996,2001
Oracle
Corporation.
All
Rights
Reserved
This
file
contains
installation
instructions
for
installing
the
Oracle8
ODBC
Driver
software.
It
is
divided
into
four
parts:
o
Part
I:
Summary
of
systems
supported
by
Oracle8
ODBC
client
Error:ORA-21560: argument 2 is null, invalid, or out of range
I want to diplay/view as per file content format from the file under that specified directory.
Have any other method / any help or suggestions would be really appreciated.

I changed the code like...
CREATE OR REPLACE Procedure READ_FILE_LOB_tmp IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(4000);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
Now its working fine with one addtional line...
The file content is...
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
But The output was...
File testfile.txt in Directory READ_LOB_DIR exists
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
here, i want to delete that additonal line...?

"To view the full contents of this document..."

Similar Messages

Maybe you are looking for