TOC not refocusing to Selected topic

Using X5, I compiled a .chm with the ;'show selection'
checkbox selcted on the TOC tab on the advanced window in the
compile dialog. When I see the results and move between topics
(opening in frames) using hyperlinks, the TOC does not change to
the surrent topic displayed. I know this is supposed to work as I
have done it before. Am I missing something or is this a bug?
Thx

Hi thegup55
You are halfway there. Expand your Windows pseudo folder and
edit your window properties for the default or the window you are
using. There is a check box there for "Synchronize TOC" (I
think-pulling from memory here)
Cheers... Rick

Similar Messages

  • RoboHelp HTML 9 - CHM file Lost focus on selected topic on Content tab.

    Dear all,
    In my generated CHM file, I click on a topic on the Content tab, then I click anywhere in the content displayed on the right pane. The selected topic on the Content tab then not highlighted anymore. Why it happens like that ?
    Anyone please help me explain this case and guide me solve that problem.
    Thank a lot.
    P.

    Hi there
    There are a couple of options you likely need to configure.
    First, Click View > Pods > Project Set up and look at the Window properties for your CHM.
    Note the options I've highlighted below:
    Next, Click View > Pods > Single Source Layouts and right-click the Microsoft HTML Help layout.
    Choose Properties and look at the Single Source Layout properties for your CHM file. Once you examine them, click the Edit button next to "Advanced Settings".
    The HTML Help Advanced Settings dialog shoul open. Click the TOC Styles tab.
    From there, ensure you have the option I've highlighted below.
    Hopefully this helps... Rick

  • TOC not working in RH10 WebHelp with IE8

    Hi all,
    My generated Webhelp results in TOC books that will not expand or collapse after navigating via the TOC.
    It seems to work fine in Chrome, though.
    Any ideas/workarounds/fixes?
    Thx
    -Matt
    @mattrsullivan

    I have just looked at this using an IE8 emulator and I can open a book in the RoboHelp Tour, click on a topic and it displays. Then I open another book and click on a topic, it displays. I can open and close books and select topics and everything works correctly including search.
    John Daigle is with me and he has IE8 on a machine rather than an emulator and it is all working correctly there as well.
    Everything is pointing to this being an issue with IE8 in your environment. Can you test from a machine in a different environment?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

    Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet."   I am obviously connected to the internet since you are reading this.
    I tried upgrading permissions but it did not help!?  Can anyone tell me what is wrong?  Thanks

    Try
    Reboot the computer, see if that fixes it.
    Then try:
    Backup your files off the computer (not TimeMachine) and disconnect
    Hold c boot off the 10.6 disk and simply reinstalling OS X
    Log in and update to 10.6.8
    c boot off the 10.6 disk again and use Disk Utility >Repair Disk
    reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

  • Page numbers in Word TOC not correct; have to open doc and update

    I'm using RoboHelp HTML 9 and Word 2010.
    I generate a Word doc (.docx) as one of my outputs. The Word TOC works -- that is, if I Ctrl-Click one of the items in the TOC, I'm taken to that item.
    A user just came up to me asking why the page numbers are off. Here's what I see.
    I use SSL to generate the Word doc.
    In the TOC, I look for the topic "Setting Up Comments." It's listed as being on page 30.
    I Ctrl-Click that TOC item and it takes me to the topic, but when I look at the footer, it says this is page 28.
    If I go back to the TOC, right-click, and choose "Update page numbers only", Word updates the TOC, which now shows the correct page number, page 28.
    In other words, generating my printed doc is now a multi-step process:
    Use SSL to generate the Word doc.
    Open the Word doc and update the TOC.
    Save the Word doc.
    Shouldn't the TOC be right the first time around? Am I forgetting to do something?

    Your example was not the best, many chapters have such a topic. However, I am seeing issues there.
    In another project I am finding the page numbers correct so I will need to do some more digging.
    Meantime, given the problem can be recreated using the sample, you should report it as a bug.
    Please follow this link.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • RH8 browse sequence based on TOC not working as expected

    I have several standalone projects for which RoboHelp's browse sequence tool correctly generates the browse sequence based on the TOC using a book level of 0 (zero) so that it picks up everything in order.  If a project has books A and B (which are not themselves topics), and each book has two subtopics, A1, A2, B1, B2, the TOC-based browse sequence is A1, A2, B1, B2.  For a project I inherited (originally designed as 40 separate merged projects that I combined into a single .xpj project), "books" A and B for the example above are also topics.  When I generate the browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2.  The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.  Has anyone seen this before?  Any ideas how to fix it?  Does the problem have anything to do with the fact that the "books" in this project are also "topics"?

    Create a new TOC and make it a copy of the existing TOC.
    Then remove the topics from the books and try again with the browse sequence.
    I don't know that will fix it but it is what I would try first.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • TOC not updating when project is saved

    The Table of Contents is not saving when project is saved. To see saved changes, I have to close and reopen.

    Hi there
    Just to be clear, this *IS* RoboHelp HTML, no?
    In RoboHelp HTML, there is no dynamic link between the TOC items and Topic Names. Sure, if you rename the File Name in a topic so the HTML file name changes, it will automatically update the TOC so that the link isn't broken. But the TOC elements are stored in a separate file completely. So I'm really confused as to what you are seeing or expect to see. Once you have a topic in the TOC, the TOC node may represent the Topic Title. Perhaps:
    How to confgure the gizmo.
    But if you later change that Topic Title to read:
    How to configure the widget
    The TOC will not change automagickally. You will have to either re-run the wizard to create a new TOC or you will need to manually edit the TOC node so it is now correct.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • My hp4530s wifi switch does not enable when selected

    hp4530s with windows 7 prof. The wifi switch does not enable when selected in mobility manager in the control panel. The option is shown, however is grayed out and does not enable the wifi

    Hi,
    When was the last time that WIFI worked on the HP4530s?  If you aer using a dock, then remove the laptop from the dock.
    You can check the status of the WIFI adapter in Device Manager.  You should have something similar to the below image if your model is equipped with WIFI.
    The HP Support Assistant and also be used to troubleshoot network issues.
    Look under the Internet and Security topics in HPSA for the adapter.
    Try diagnostics under the My computer tab in HPSA
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Field is not coming in selection screen

    Hi all,
    In one of my report there is a field customer group in selection-screen. Report is working fine so i transport request to qas in qas that field is coming on selection screen and its working fine.
    But when i transport same request from qas to prd that field is not coming on selection screen.
    I try 2-3 times by making diffrent diffrent request but still same result. can any body please tell me why its happen in prd??
    regards
    Ankit

    Hi,
    What i would like to suggest u that u need to first
    is u have to convert the R/3 Production systems into the Quality one
    try using tcode BDLS
    read the documentation of BDLS.
    hope this helps u !!
    thanks
    ravi

  • I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

    I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

    What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
    Mylenium

  • Why did I have to do a reset to keep my printer from using so much ink? Was not able to select "plain paper." Was printing in "Ultra Premium" mode.

    My printers (two Epsons) would not let me select <Plain paper> when printing anything, and always defaulted to <Ultra Premium>, which is the reason I've been using a ton of ink for the last several months. What caused that? I finally did a Reset to Basics which took care of the problem, but what created the problem?

    hello LesS., you'll probably have to contact epson's support about this issue, since i don't see how this would be related to firefox or mozilla products: support.epson.com
    thank you for your understanding

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

    I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

    Sync works the same way it always has, connect the device, select the content desired to sync and sync.
    All the media should be in iTunes already, iDevices are not and have never been backup devices.
    If this is a new computer, move the content from the old computer to the new computer.

  • Contacts and calendar are not syncing? the word info is not in the selection iTunes sync menu

    contacts and calendar are not syncing? the word info is not in the selection iTunes sync menu

    Hey jimneeds,
    Thanks for the question. This feature was discontinued with OS X Mavericks:
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/HT1386
    What you can sync
    […] - Contacts*
    *To sync this content on an iOS device using OS X Mavericks v10.9 or later, use iCloud or another cloud-based service.
    Thanks,
    Matt M.

  • Migo cannot be done " PO does not contain any selectable items"

    Dear SAP Gurus
    We have a very urgent issue, while trying to do MIGO for a particular standard PO.
    Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
    The accounting document which is created when the down payment is done can be seen in the purchase order History.
    Please suggest soem solution
    Thanks
    kk

    Hi Kavitha,
    Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
    Try this, if unresolved revert back.
    Reg,
    Ashok
    Assign points if useful.

Maybe you are looking for