Token Access to AS ABAP

Hi,
Some of our customers using CRM 2007 and need to know if it is possible to make end users to access CRM2007 applications with a Token Infrastructure.
This is easy and lots of standard implementations exists for AS Java especially in Portal Scenarios, but I couldn't find any standart solution for an AS ABAP based system.
As CRM2007 uses BSP based applications, Authentication is controlled with ICM, and my searches for a custom Authentication Mechanism for AS ABAP ended without success.
The only option I can see to implement such scenario is to call CRM2007 applications from a NW Portal and implement Token Authentication over AS Java.
Please let me know if you have such scenarios or solutions implemented
Regards

Hi,
When you configure the ICM application using t-code SICF you can configure it to redirect to the JAVA AS system where the authentication module is installed (this doesn't have to be a portal NW AS). Then after sso2 ticket has been issued a redirect back to the ICM applicaiton is performed - the user doesn't see any of this, so it looks like they are being authenticated directly when they access the ICM application URL on ABAP AS.
Products such as the one mentioned at https://ecohub.sdn.sap.com/irj/ecohub/solutions/trustbrokeradapter include the necessary login modules nad the servlet to perform the redirection.
Thanks,
Tim

Similar Messages

  • Access code  for abap

    Hi everyone,
    Can you please guys post the access code for abap to mscagin at yahoo com
    thanks
    sri

    What do you mean by access code? Is this the same as a developer key?

  • Create a table and upload data in MS ACCESS from SAP ABAP programming?

    Hi All,
    How to create a table in MS ACCESS database and Upload SAP database table data into MS ACCESS table using ABAP programming?
    Explain: My client requirement is " If he/she runs a ABAP Program, that will create a table and upload data into MS ACCESS Database table in background. "
    Could you please give the solution or code? I know the program RIACCESS and I went through the SAP Note 583698.
    Is this only solution for this?  Or Any other possibilities?
    Please give me solution.
    Thanks in advance.

    Hi,
    It is not possible to create tables in a non SAP schema from inside SAP.
    The SAP-Oracle license also does not allow you to create the table (see note 581312):
    the following actions, among other things, are therefore forbidden at database level:
    Creating database users
    Creating database segments
    Querying/changing/creating data in the database
    Using ODBC or other SAP external access methods
    Please refer following link,
    [Ckick Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    You can also do it by LSMW,
    If you are using Access 97, you can download directly into an access
    database from SAP. See program RIACCESS for details. You have to establish
    an RFC destination PS_ACCESS_1 and 2.
    There are then a couple of function modules. Go to SE37 and put in
    msaccess and hit PF4.
    The following is from the readme file: sapgui/ps/readme.sap
    For the MS-Access interface SAP delivers 4 files:
    WDPSASTR.EXE This is an RFC server program that is called by SAP R/3
    (PS module). This program creates a MS Access database. The structure
    information of the tables is transferred from R/3. In addition to
    these tables a table named DDIC is created. This table contains the
    structure information and should in no case be modified or deleted.
    WDPSATAB.EXE This is an RFC server program that is called by SAP R/3
    after WDPSASTR. This program filles the tables of the database with data.
    There must not be made any changes of the structure of
    the tables between the calls of WDPSASTR and WDPSATAB.
    WDPSAZET.EXE This is an RFC client program that triggers work/time
    confirmations in the PS module of SAP R/3 (like transaction CN27 Collectiv
    confirm).
    WDPSAMAT.EXE This is an RFC client program that triggers material
    confirmations in the PS module of SAP R/3 (like transaction MB1A - Goods
    Please also refer following links,
    [Click here|Upload data from MS Access tables, to SAP tables.;
    Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
    It is available in the "SAPGUIPS directory".
    Then do the followings :
    1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
    2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
    Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to
    wdpsastr.exe and wdpsatab.exe respectively.
    3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
    The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
    Please note that Access only supports tables with up to 255 fields.

  • SAPgui access protection for ABAP AP Server

    Hello,
    I want to disable the SAPGUI access on one ABAP AP Server. I can't find any kernelparameter in (rdisp/* or login/*).
    Is there a possibility to configure the dispatcher to allow only load balancing and no direct access?
    The story behind is that users don't want to change their wrong saplogon files.
    Kind regards
    Joerg

    I remember that this was done in "The EarlyDays" when OSS1 was accessible via SAPGUI. When you tried to log on you got a popup that you have to use load balancing and you got kicked out.
    I guess this is not a parameter settings and must be done during login by a user exit.
    For a start you could use
    Note 609863 - How to lock out users using GUIs of wrong version
    Note 142724 - Prevention of multiple SAPGUI logons
    Markus

  • Access UME in ABAP

    Hello experts!
    How can i access to the UME database from ABAP program ?
    Thanks!

    mariano,
    well the easiest way would be expose the needed funtions as web services on the java-stack and use them in your abap-programm
    kr, achim

  • ABAP Query: Access variables in ABAP Program through InfoSet Query.

    Hi,
    While generating a report using ABAP Query Tool, how can we access the variables in the ABAP Program in the InfoSet Query?
    Thanks in Advance!!!

    HI,
    Dear, it seems that you have changed the query in SQ02 and then just save it and not generated.
    or may be after generation again clicked on SAVE button.
    So untill unless you will not generate the query, it won't work.
    Secondly, by chanegs in the query, i don't think it changes the name of the main program.
    Regds,
    Anil

  • Anonymous user Unbale to access an WebDynpro ABAP iView

    Hi,
    I have developed an application using webdynpro ABAP and integrated that into portal.
    For this webdynpro application i have to create an iview, assigned it to a page, assigned this page to a custom role. I also set Authentication to anonymous for the page and iView. Assinged the custom role created to anonymous Group.
    But while running it i am getting an error "An exception occurred while processing your request. Send the exception ID to your portal administrator. Exception ID 04:55_25/10/11_0047_14739050"
    When I checked the log, it shows the error as "Deprecated scope of type SERVERSESSION_AT_LEAST_ONE_APP_SCOPE is used! Please replace the usage of scopes with new
    mechanism based on "Cross application session communication API".
    I also checked the note 1031159 and changed the configurations accordingly but getting the same above error.
    I am on EP7.3 version.
    Please guide me to move further successfully in showing the webdynbpro abap applicaiton to anonymous user.
    Thank you.

    Hi,
    I'm also working on EP7.3 and R3 WD4A integration. But I just can't find any WD for ABAP from whithin EP7.3 wizard.
    I tried to create the WD4A iview by right-clicking a PCD folder and then "New"->"iView"->"iView from remote source" to get a search screen. I choose a system alias (point to bk web as), use "*" as application id, and pick "WebDynpro for ABAP" as the application type.
    However, I always got "Nothing found. Change your search criteria."
    I did do some activation work on backend R3 SICF setting. I'm able to directly access  web dynpro via http://mywebas.domain:8000/sap/bc/webdynpro/mywd.... 
    If you're using the same scenario, please let me know anything I missed or any other special setting.
    Thanks

  • Access MIME from ABAP Mapping for Attachment

    Hi,
    I am adding an attachment in ABAP Mapping and sending that message to Ariba System through HTTP Adapter channel.
    I am able to send the message successfully and also I can see the attachment in the PI RWB But I am not able to see any
    attachment in the Receiver's end along with the message.Ariba is able to receive the message successfully though.
    It looks like I need to change MIME Header a bit before sending the message.
    I check this link.
    XI Attachment and main document MIME sequence
    But Its about SOAP Adapter with PayloadSwap Bean. Since HTTP adapter is on ABAP we can not use the Module
    Tab of the channel.
    I need to know how can I use ABAP Mapping to access the MIME HEADER to change/ check Content Disposition and
    other properties.
    Thanks,
    Vijay
    Edited by: tech.info012 on Oct 12, 2010 6:33 PM

    When I tried the 2nd option It is giving me this error in response message. Do you have any idea what problem can cause this.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not queue receive
    for message 4cb474bf-00c1-02af-e100-80000aa00d4b(INBOUND). Reason: java.lang.NullPointerException:
    </SAP:AdditionalText>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks,
    Vijay

  • Access table using ABAP program in other database

    Dear SAP Expert,
    We have requirement that related to SAP interface.
    Our SAP system run on Oracle database 11g (Unix).
    Illustration: SAP system = A non SAP system = B
    We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
    What is the best practice for this interface
    Do we need database link? If yes, please help to inform me the details step to configure it.
    Thanks and Regards

    Hi Friend,
    You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
    else.
    ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
    Regards
    S.Janagar

  • Access key for ABAP

    Hi all,
    I need to create program of ABAP. It need access key for creating. How to get access key?
    Please advice,
    Duypm

    Hi Duypm,
    You have to register the user as developer.
    Login to the service market place            service.sap.com
    Keys & Requests -> SSCR keys ->Register Developer-> give the user id and from below select the installation number and click on register you will get the key.
    Use that key when prompted in sap.
    Regards
    Ashok Dalai

  • Access internet through abap

    how can we use abap to access internet? Is it a possibility?

    Hi,
    Yes, You can use the function module call_browser to access a site..
    i hope it answers the question else can you be more clear
    Thanks&Regards
    Sarves

  • Access KM using ABAP

    Hi All,
      How to access / create files in KM using ABAP code? Any FM available to create folder in KM via ABAP code? Searched the forum but most of the similar queries are unanswered.
    Requirement:
        Need to upload and retrieve documents from KM for web dynpro ABAP application.
    Thanks
    Krishnan

    Hi,
    KM is an application on SAP portal platform developed using Java. So direct communication from ABAP to KM through RFC or FM would not be possible.
    I think through webservice there is a possibility. You can create a webservice on SAP. Portal This webservice can be used in your ABAP code.
    Regards,
    Jigar Oza

  • LDAP access in WebDynpro ABAP

    Hello,
    Could you let me know your views on the following:
    Scenario:
    Customer has an LDAP and would like to use it for any user authentication
    Question
    1) How can a webdynpro application connect to LDAP for user authentication? Could you pls. elaborate on the process / configuration.
    2) With WebDynpro for Java, I suppose we can configure the UME to use LDAP and also we can map LDAP users to R/3 users. Is there something similar available in ABAP (CUA-LDAP connectivity?)
    3) I believe this needs to be configured at the ABAP Web Application Server level and when the settings are done user are authenticated against LDAP. Is my understanding right or do we need to code something within ABAP webdynpro application as well.
    Appreciate your inputs.
    Best Regards,
    Gajendra.

    Hi,
    I think we get connected to the enterprise portal to have the access to LDAP where the users are mapped as per single sign-on.
    Please try to post in the Enterprise portal aslo to get more information.
    Regards,
    Lekha.

  • Access web dynpro abap application from external portal.

    Hi
    How can a application made in ABAP be accessed from SAP External Portal.
    Like a java web dynpro application could be easily accessed by making a webDynpro Java ivew in portal.
    Is their any method to access a ABAP application similarly.
    Thanks.

    Thomas
    Here is our scenario
    We want to expose an ABAP webdynpro application using ABAP Webdynpro iView in portal to the internet. Does this scenario use the ITS http server / port like URL iview behind the scenes.
    Can you please share more info on the above scenario.
    Thanks in advance
    Lakshmi

  • How to get Access key for ABAP Program development in HANA Studio

    Hi,
    I have got instance for ABAP on HANA development system.
    But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
    Can any one suggest the way to create ACCESS KEY??
    Thanks,
    Ram

    Dear Ram,
    it seems that you need to follow the chapter 6.1 in the documentation...:
    Kind regards, Stephan

Maybe you are looking for