Too many authorisations

Hi, I have a problem with authorising and de authorising digital editions. I authorised digital editions on 3 computers, I then wanted to authorise it on a fourth and was given the message
E_ACT_TOO_MANY_ACTIVATIONS http://adeactivate.adobe.com/adept/Activate 182:9182:10000 urn:uuid:10d704ce-0079-450c-8b51-90ebe6f8beec
I chatted with support on Adobe and was told to de-authorise one of the computers before authorising the fourth. I did this, and was still unable to authorise the fourth, and when I tried to re-authorise the computer I had de-authorised, I was give the same message. Now I have a great deal of content I am unable to access as I do not have the authorisation! I can authorise my computer with a different Adobe ID, but this means I will not be able to access the content I already have.

Adobe Digital Editions (like other free Adobe products) is not supported through email, chat or phone. When you call or talk to online chat they are supposed to direct you to submit a web case.
You can open up a web tech support case by going to http://www.adobe.com/support/digitaleditions and clicking on 'Submit a web case'
Make sure to include the details in your case including the AdobeID you are using as well as the complete error message as you did here, and it will help speed things up.

Similar Messages

Too many authorised computers, some died

in a nutshell, i authorised a few computers with my acount, 3 computers in fact, anyways, they got repaired, upgraded, died, etc and now i recently upgraded os and wiped the old and 4got to deauthorise it, so i have one working computer with itunes and it says ive used all 5 computers, and im getting a laptop but i want to have both authorised and b able to make purchases, not just play stuff, i read somewhere tat once a year you can reset your account to zero computers in this case, but i dont know how to, someone please help i need to do this in a few hours!

If you've reached your limit of 5 you have the option to deauthorise them all in one go from your iTunes Store account and start over again. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation
To deauthorise all computers associated with your account:
1. Click iTunes Store in the Source pane.
2. If you're not signed in to the store, click the Account button, then enter your account name and password.
3. Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
4. In the Account Information window, click Deauthorize All.

Error saying "this ID has been authorised too many times" , how to resolve ASAP?

Error saying "this ID has been authorised too many times" , how to resolve ASAP?

Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html
They can reset your authorizations, and then you must reauthorize any devices you still need.
(Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations (E_ACT_TOO_MANY_ACTIVATIONS) . Thanks to AJP_Bear for that tip.

Got message trying to log in to email 'too many l...

Hi BT,
This morning when first logging into BT Mail I got a failure message to the effect that there had been too many login failures on my account try again in 10 minutes.
Since this was on my FIRST login in attempt it could not have been me that caused the login failures.
Questions for BT:-
1. Is someone trying to hack my email account?
2. How many times does it have to fail before causing this message?
3. Are you able to detect (IP Address?) where these failures are coming from?
4. If you are able to detect there are too many login fails how about displaying the number of login fails?
Looking fwd to your reply.

radclifm wrote:
re: Did you receive any replies?
Yes, in the form of delivery failure messages. So I could see that the real email address used (it was mine) and I could see what the spam message was (it contained a link to a dodgy website). Not being an email spoofer I can only go by what I have read and it would appear that when an email address is spoofed it will be returned by the delivery failure system to the spoofed address because no authorisation checks are done on spoofed address. That is the point of spoofing a genuine address.
re: ... email would return to you so there would be no gain for the spammer
The messages sent out contained a web page link, so the spammers (and there have been several) would not be trying to get replies from the email, more trying to get the recipients to look at some dodgy web site. Fair enough.
re: The volume of emails sent by spammers is I suspect more than the 49 permitted group email limit set by BTMail on your account so this would be rather limiting for any spammer.
I've seen the failed deliveries come back in batches, which would fit the group email limit, and mean they were trying to circumvent the group mail limit.
As an aside, it's worth setting up a non-existent email address in Contacts to see if anyone is doing this, then you'd see the failed delivery come back. I have already done that. It is the only email address I have in my contacts. I don't keep contacts or emails on the servers. I would rather be responsible for my own emails and contacts security.
re: deleting the emails to cover their tracks - I've found that with BT Mail webmail if you delete from Sent box they don't appear in Trash, so you wouldn't see the spam mails there either. I have found that in BTMail if you do delete from sent box they do get put in the trash so your spammers are very tidy not only deleting it from the sent folder but also the Trash folder.
I am not trying to convince you one way or the other, you have your views that your email account is/has been logged onto and emails sent from it and I have my view that it was only your email account address that was spoofed. I think we will just have respect each others views and agree to differ.
The bottom line is you do what you feel is best for your security and piece of mind when using your email account.

Taking too many subscription payments

My company has 4 Creative Cloud Subscriptions but Adobe are taking 5 subscription payments form the company credit card. I have transaction ID for payments but am getting nowhere trying to speak to someone to sort this out. Please help as a matter of urgency. I expect a full repayment of the money you are taking without authorisation. We only recive 4 invoices.

Hi Beverley I am getting nowhere! I am close to cancelling all subscriptions!!
Below is transcript of online Chat. Can you please call me on the telephone number below to resolve this??
You are now chatting with Dhananjay.
Dhananjay: Hello! Welcome to Adobe Customer Service.
Neil: Hello
Dhananjay: Hi Neil
Neil: My company has 4 Creative Cloud Subscriptions but Adobe are taking 5 subscription payments form the company credit cards. I have transaction ID for payments but am getting nowhere trying to speak to someone to sort this out. Please help as a matter of urgency. I expect a full repayment of the money you are taking without authorisation. We only recive 4 invoices.
Dhananjay: May I please have your email address registered with Adobe?
Neil: My own one is [removed], but we also have subscriptions on [removed IDs]
Dhananjay: Thank you for the confirming.
Dhananjay: I will be glad to check and help you with this issue.
Neil: Thanks
Dhananjay: Thank you for waiting. One moment please.
Dhananjay: I checked to see you have Creative Cloud membership (one-year)
Neil: yes
Dhananjay: For [removed]
Dhananjay: Order Date: Jul. 15, 2013
Neil: yes that one is correct
Dhananjay: Sorry for the wait. Please do stay online.
Neil: ok
Neil: ok
Dhananjay: May i know why you want to cancel this order?
Neil: I do NOT want to cancel this order.
Neil: A payment of £38.11 was taken from credit card on 27 October with reference of DSSY012698981DT, please tell me what subscription that is for.
Dhananjay: Okay.
Dhananjay: Please stay online for 2 to 3 minutes while I check this information for you.
Neil: ok
Dhananjay: I'll be right with you.
Neil: thanks
Dhananjay: I checked and see your order is for ID [removed]
Dhananjay: Order number AD001185187UK
Dhananjay: Dated 26-Oct-2013
Neil: but a payment of £22.23 is being taken on 16th October for this subscription. Reference is DSSY013475821DT
Dhananjay: The above order you want to retain?
Dhananjay: AD001185187UK?
Neil: yes, but why is there a payment of £22.23 being taken on 16th October with reference DSSY013475821DT??
Dhananjay: I checked and see Re: Taking too many subscription payments is for DSSY013475821DT Order date 15-Jul-2013 Id [removed]
[removed] are both the same person so I only need one subscription. please cancel AD001185187UK.
Dhananjay: Please stay online, while I cancel the subscription for you.
Neil: ok
Dhananjay: Thank you for waiting. One moment please.
Neil: ok
Dhananjay: This is the one which is charged £38.11
Neil: correct
Dhananjay: As one year contract is expired and you have been moved to standard price.
Neil: ok
Dhananjay: I'll be right with you.
Dhananjay: Sorry for the wait. Please do stay online.
Neil: ok
Dhananjay: Please be informed a (Cancelation fee will apply if customer cancels 30 days +/- of their annual commitment date).
Dhananjay: cancelation fee is calculated as 50% amount of the remaining month’s charges (excluding the current month).
Neil: Cancel whichever subscription will cost the least to cancel, either AD001185187UK or AD001610869UK
Dhananjay: I will check.
Neil: is it cheaper to cancel AD001610869UK as its renewal is is July?
Dhananjay: As you have been paying £22.23
Dhananjay: For this order dont cancel that.
Dhananjay: As Account Activated: 15-Jul-2013
Dhananjay: You will have to pay the same amount for one year better cancel the other order.
Neil: As a cancellation fee only applies if customer cancels 30 days +/- of their annual commitment date, and £22.23 account renewal is July, there will be no cancellation fee for this one.
Dhananjay: Weren't you informed about the renewal?
Neil: No!
Dhananjay: As Account Activated: 15-Jul-2013 already 3 months are up Neil
Thanks
Neil
http://www.designworksdigital.co.uk/DW_Email_Signature/Logo.gif<http://www.designwork.co.uk/>
Neil Rapson / Director
40 Trafalgar Lane
Edinburgh EH6 4DJ
Adobe Authorised Print Service Provider / ISO9001:2008 Accredited Company
Designworks Design & Artworking Ltd is a limited company registered in Scotland / Registered no. SC192515.
Message was edited by: Beverley Gray

Unable to create report. Query produced too many results

Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
        <br>
        <br>
        Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace:    at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
   at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
   at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
   at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
   at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.

Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
              maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Too many columns to be shown in the Enterprise Manager 11g?

Hello,
we are having some problems with the Enterprise Manager 11g. When we want to VIEW DATA of a specific table, we get this exception. We think that our table has too many columns to be displayed. If we delete some of the columns, the data is shown in the enterprise manager. But this cannot be a solution for us. Can you help us with this point?
2009-08-03 10:07:04,210 [EMUI_10_07_04_/console/database/schema/displayContents] ERROR svlt.PageHandler handleRequest.639 - java.lang.ArrayIndexOutOfBoundsException: -128
java.lang.ArrayIndexOutOfBoundsException: -128
     at oracle.sysman.emo.adm.DBObjectsMCWInfo.getSqlTimestampIndexes(DBObjectsMCWInfo.java:194)
     at oracle.sysman.emo.adm.schema.TableViewDataBrowsingDataSource.executeQuery(TableViewDataBrowsingDataSource.java:167)
     at oracle.sysman.emo.adm.DatabaseObjectsDataSource.populate(DatabaseObjectsDataSource.java:201)
     at oracle.sysman.emo.adm.DatabaseObjectsDataSource.populate(DatabaseObjectsDataSource.java:151)
     at oracle.sysman.emo.adm.schema.DisplayContentsObject.populate(DisplayContentsObject.java:369)
     at oracle.sysman.db.adm.schm.DisplayContentsController.onDisplayAllRows(DisplayContentsController.java:303)
     at oracle.sysman.db.adm.schm.DisplayContentsController.onDisplayContents(DisplayContentsController.java:290)
     at oracle.sysman.db.adm.schm.DisplayContentsController.onEvent(DisplayContentsController.java:136)
     at oracle.sysman.db.adm.DBController.handleEvent(DBController.java:3431)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:577)
     at oracle.sysman.db.adm.RootController.handleRequest(RootController.java:205)
     at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:121)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:109)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:153)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)When we select the table via SQL, everything works fine.

Hi,
I'm Galit from the QE team of VIN.
All the things that you've described are correct.
It is actually an edge case where the only VM, that the manual App can be managed from its Map view, was removed from the App.
The Manual App management is as designed, and may be changed in the future.
There are 2 ways to overcome this situation:
1.You can, as you stated, create another Manual App with similar name and remain with the "Zombie App".
2. To run a specific command that will remove the Zombie App from the DB.
Please note that option no. 2 involves using an API that we do not publish.
If you would like to use option no. 2 contact me in private and we will see about supplying the relevant commands to run in order to delete the "zombie" application.
Thanks,
Galit Gutman

Router connection problems - DISH satellite receivers or too many devices?

(Sorry about that - I thought I had broken the message up.)
I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
I have the following:
- Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
- HP desktop running Vista Home Premium
- Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
- Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
- Linksys WRE54G Wireless Range Expander, v3
My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
Within an hour my connection timed out.
Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
ping 192.168.1.1 -t
I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
Anyway, I would very much appreciate some help.
Message Edited by CKdoubleU on 10-01-2008 08:43 AM

First please break that long text into separate paragraphs. No one wants to read one long runon sentences
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Too many connections - even after closing ResultSets and PreparedStatements

I'm getting a "Too many connections" error with MySQL when I run my Java program.
2007-08-06 15:07:26,650 main/CLIRuntime [FATAL]: Too many connections
com.mysql.jdbc.exceptions.MySQLNonTransientConnectionException: Too many connections
        at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:921)
        at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2870)
        at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:812)
        at com.mysql.jdbc.MysqlIO.secureAuth411(MysqlIO.java:3269)
        at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:1182)
        at com.mysql.jdbc.Connection.createNewIO(Connection.java:2670)I researched on this and found out that I wasn't closing the ResultSet and the PreparedStatement.
The JDBC connection is closed by a central program that handles connections (custom connection pooling).
I added the code to close all ResultSets and PreparedStatements, and re-started MySQL as per the instructions here
but still get "Too many connections" error.
A few other things come to mind, as to what I may be doing wrong, so I have a few questions:
1) A few PreparedStatements are created in one method, and they are used in a 2nd method and closed in the 2nd method
does this cause "Too many connections" error?
2) I have 2 different ResultSets, in nested while loops where the outer loop iterates over the first ResultSet and
the inner loop iterates over the second ResultSet.
I have a try-finally block that wraps the inner while loop, and I'm closing the second ResultSet and PreparedStement
in the inner while loop.
I also have a try-finally block that wraps the outer while loop, and I'm closing the first ResulSet and PreparedStatement
in the outer while loop as soon as the inner while loop completes.
So, in the above case the outer while loop's ResultSet and PreparedStatements remain open until the inner while loop completes.
Does the above cause "Too many connections" error?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following is relevant sections of my code ( it is partially pseudo-code ) that shows the above 2 cases:
init( Connection jdbcConnection ){
   String firstSQLStatement = "....";
   PreparedStatement ps1 = jdbcConnection.prepareStatement( firstSQLStatement );
   String secondSQLStatement = "....";
   PreparedStatement ps2 = jdbcConnection.prepareStatement( secondSQLStatement );
   String thirdSQLStatement = "....";
   PreparedStatement ps3 = null;
   ResultSet rsA = null;
   try{
        ps3 = jdbcConnection.prepareStatement( thirdSQLStatement );
        rsA = ps3.executeQuery();
        if( rsA.next() ){
               rsA.getString( 1 );
   }finally{
        if( rsA != null )
               rsA.close();
        if( ps3 != null )
          ps3.close();
   //Notice, how ps1 and ps2 are created here but not used immediately, but only ps3 is
   //used immediately.
   //ps1 and ps2 are used in another method.
run( Connection jdbcConnection ){
     ResultSet rs1 = ps1.executeQuery();
        try{
           while(rs1.next()){
                String s = rs1.getString();
                ps2.setString(1, s);
          ResultSet rs2 = ps2.executeQuery();
                try{
               while(rs2.next()){
                    String s2 = rs2.getString();
                }finally{
               if( rs2 != null )
                 rs2.close();
               if( ps2 != null )
                 ps2.close();
     }catch( Exception e ){
          e.printStackTrace();
     }finally{
        if( rs1 != null )
              rs1.close();
           if( ps1 != null )
              ps1.close();
//Notice in the above case rs1 and ps1 are closed only after the inner
//while loop completes.
}I appreciate any help.

Thanks for your reply.
I will look at the central connection pooling mechanism ( which was written by someone else) , but that is being used by many other Java programs others have written.
They are not getting this error.
An addendum to my previous note, I followed the instructions here.
http://dev.mysql.com/doc/refman/5.0/en/too-many-connections.html
There's probably something else in my code that is not closing the connection.
But I just wanted to rule out the fact that opening a PreparedStatement in one method and closing it in another is not a problem.
Or, if nested ResultSet loops don't cause the problem.
I've read in a few threads taht "Too many connections" can occur for unclosed RS and PS , and not just JDBC connections.

An embarrassment of riches - too many tablets! Should I consolidate and get an iPad Air?

Currently I have the following tablets:
- Nexus 7 2013 wifi only
- iPad 2 32 GB wifi + cellular, but no longer in contract
- iPad 1 wifi + cellular, no longer in contract
- an extra iPad 1, also wifi + cellular, not in contract that I got for free for helping somebody with some computer stuff
That same friend who gave me the iPad 1, wants to upgrade from his iPad 4th generation to an iPad Air, and he want to give me his 4th G iPad for free. It is a 64 GB wifi only model.
The reason I never upgraded beyond the iPad 2 was because all the later models got thicker and heavier, and I thought my iPad 2 was already too heavy, which is why I got my Nexus 7. I hardly touch my iPad 2 these days. They are both within arm's reach, but the Nexus 7 is easier to hold, and allows voice input, which I often find convenient, and most of the time I reach for it. I like the voice input on my iPhone 5 too, and I feel like something is "missing" when I pick up my iPad 2. Plus it feels like it weighs a ton next to the Nexus 7.
Well, anyway I have too many tablets. And soon I'll have the iPad 4th G. So I was thinking of selling the iPad 2, the two iPad 1s and the iPad 4 and getting an iPad Air, wifi + cellular with a data sharing plan with my iPhone 5. After all, compared to the iPad 2, the iPad Air is (1) lighter, (2) has Siri, (3) has a retina display, (4) has much better specs and (5) now the cellular model is universal, so if I take a trip to the U.S. it would be easier to use there.
Yet there are things I now prefer about my Nexus 7 with Android 4.4 over iOS 7. Like it has better sharing features, the ability to send all kinds of attachments, more customization, better "hooks" into the UI from 3rd party apps, the ability to choose your own default mail apps and browsers. It seems just more flexible overall. And the Facebook app runs "smoother" than on my iPad 2.
But I like iOS 7 too.
I wonder if I would use an iPad Air any more than I do my iPad 2 since it is lighter than the recent iPads. The screen being larger might make reading magazines and news sites easier. And Siri is still better than the Android voice dictation in my opinion. Or will the weight and size actually keep driving me back to the Nexus 7?
I guess I still haven't found the right place in my life for using a tablet for anything other than casual use. I don't want to get into a religious argument about whether tablets are production devices versus consumption devices, but basically I am in the camp that does not see them as true productivity devices. My iMac is for that.
Conundrums, conundrums. I do have too many "devices" right now though. Within an arm's reach I can count 12 computers, tablets and phones all on wifi! Who needs that much stuff?!
And if I do get the iPad Air, do I need 128 GB? The way they sell here in Japan, you don't put any cash down at all, and basically get an interest-free loan for 2 years. So "for just a few hundred yen more a month" you can go from the 32 GB model to the 64 GB model. And then "for just a few hundred yen more a month" you can go to the 128 GB model. It seems a waste not to get the 128 GB model. But in my current iPad 2 I only use a little more than half the current 32 GB.
Decisions, decisions. Any thoughts?
doug

The weight is somewhat of an issue for me. I find the iPad 2 irritatingly heavy whenever I pick it up, and the iPad 4th generation is heavier even than my iPad 2.
But for the amount I use it I could get used to that. That option is certainly the least headache, contract-wise, and I would avoid the ever-present possibility of dealing with AppleCare if something is "not perfect" (which it never is).
I guess the only "practical" reason would be that I would be getting rid of all my iPads with a cellular option. So if I did make a trip to the U.S. in the spring, it would be harder to use the iPad 4. Here, in Japan, of course I could use the free tethering option on my iPhone 5.
So I guess it is just the cellular option I'm giving up that is in the back of my mind.
doug

"Too Many Real Instruments"

I am posting this in the '09 topic, but my question really dates back to Garageband '08. I rely on Garageband often, and I'm a big fan of it. However, it contains a serious problem which I need fixed.
I create a new project, drop a single iTunes song into it, and begin to edit. Almost every time, randomly while playing the song the "Part of the project was not played. This project has too many real instrument tracks to be played in real-time" warning message appears. I only have 1 track! Worse still, my audio driver lets out a terrible "HONK" which startles me and blasts through the entire house. After that, My sound output faintly exists until I open up Audio MIDI Setup and change a random setting on my output.
I am quite tired of this predicament. Is there anyway to fix this (without money)?

I was experiencing a similar problem, and I just got off the phone with applecare and went through all their steps.
I'll try my best to recount them here. But before I do, let it be said that the tech fellow, once he heard what I was doing, exclaimed that my core problem was that I needed to be creating new projects, and not re-using the same project (ex. "My Song 2") over and over.
What I've been doing is backing up a pile of mini-discs that have live concerts on them. A couple of hours of audio each one, and I've been recording them into Garageband. After I divide the concert up into songs and export them to itunes, I've been deleting the track in Garageband and then importing the next concert (repeat x 10 concerts).
About 7-8 concerts in I started getting that popping sound when the sound would cut out (made the sound of depressing the safety-seal bubble on the metal lid of a jam jar). At first, quitting Garageband and opening it again would work. On the 10th concert, when the sound cut out the sound for the whole computer would stop working (itunes, volume buttons on my keyboard, everything).
So the tech fellow said the lesson is this: create new projects. Don't be shy about it. No need to re-use and recycle in cyberspace.
Now - my applecare steps:
- First we went: Macintosh HD, Library, then dragged "Caches" to the trash
- then went to Finder, Go, Utilities, Disk Utility, Macintosh HD, Repair Disk Permissions (that took some time)
- then restarted the computer
All seems to be well now.
Good luck

Too many real instruments for a new project?

I keep getting the notification which says "Part of the project was not played - This project has too many real instrument tracks to be played in real-time".
BUT the problem is that this occurs even when I open a new garageband file (i.e. no tracks!) and I'm only 3 seconds into recording the first track! So garageband is basically not working for me. I've tried uninstalling and reinstalling it to no avail. Just a few months back I was still able to use it comfortably to do edit many different tracks together so I really don't know what the problem is. I don't really know if its a problem with the processor as I barely use the memory on my macbook pro and even when recording CPU usage doesn't go above 20% so I'm really at a loss. Please help!

Oh apple support asked me to try that out too but it did not work.. In fact for some of the suggestions they gave (eg using a different user, or even locking the track) it only managed to extend the period of recording to about 10 seconds before the problem resurfaced and after that it was back to the same 3 second problem.
But that is an important clue, Josiah. If you cannot even record properly from a different user account with basic settings, we know that the settings in your user account cannot be causing this - this looks like system wide trouble.
You could run a hardware check over night, to check your hardware:
Intel-based Macs: Using Apple Hardware Test
and if the hardware check does not show any problems, I'd reinstall Mountain Lion.
See Linc Davis's post on how to reinstall: Re: Garageband doesn't open in Mac Mini mid 2011
Regards
Léonie

My ipod touch won't let me download apps, it tells me that I have too many photos and videos but I haven't got any photos or videos at all.

My ipod touch 4g keeps telling me that I have too many photos and videos and will not let me download apps. I have deleted all the photos and videos and some of my old apps but it keeps telling me the same message. I have tried to sync it with the pc and I have turned it on and off and I have reset it but nothing has worked. Please help! Thank you

Go to Setting>General>About. oow much avaialbe storage do you have?
Have you tried resetting the iPOd?
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

My ipod 5th gen has too many GB on the other, and now the rest of my apps and music won't download. What do I do?

so I went to sync my ipod, and the computer says i have too many GB of space being used on my ipod for "other". I checked yesterday and there wasn't nearly that much space being used. What happened, and can i fix it? Thanks!

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Too many authorisations

Similar Messages

Maybe you are looking for