Too much resources use by the iOS6.0.1. How can I downgrade ?

Good evening,
I have an Ipod 4 touch. I use Amplitube to simulate amps with my guitar. With Ios5 I had no problem but since upgrade on Ios6 Apps close suddenly. Reason : not enough ram memory.
How can I fix this ?

All I can say in this Apple forum is that downgrading the IOS is not supported by Apple.
For your problems:
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Similar Messages

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

Downgrading isn't supported and wouldn't help. You need to fix your phone.
1. Delete and reinstall all email accounts.
2, Restore the phone in iTunes, first using a backup and if needed as a new phone.
iTunes: Restoring iOS software

Explorer.exe uses too much CPU cycles (roughly 50%)... How can I fix this?

Hi everyone,
In the last two days I have noticed a serious loss in system performance. The first thing I do when I come accross a performance issue is to make sure that I don't have any scheduled automatic scans running in the background, such as my antivirus. If they aren't, I then open the task manager and check to see what process(es) is(are) causing the performance issue based on CPU usage. I discovered that explorer.exe is now regularly using approximately 50% of my CPU power AT ALL TIMES (with fluctuations ranging from as low as 35% to as high as 99%, but 45%-55% is the most common range).
Now I thought this might have been some sort of fluke, so I rebooted several times, and in all cases I find explorer.exe continues to use this hefty amount of CPU power. This persists even if I leave the system alone (running, but not being used) for 15 minutes or more.
This is causing major performance issues with trying to run any/all other applications on the system, and even worse performance issues if I try to use explorer for something such as directory navigation, file searching, or file access.
I recently made an update to Windows (about a day before this problem arose), so I thought that might be the cause of this, so I ran a system restore to the restore point made before the install. That didn't fix the problem. Since the problem has only started in the last two days, I restored to a point three days ago. That didn't fix it either. I have since tried to restore to points 5 and 7 days old, and neither of those worked to fix this problem either.
I can use the task manager to end-task explorer.exe, and then restart it using "new task" from the file menu, and this seems to correct the problem. After doing such a "restart" of explorer.exe, the process no longer uses 50% of my CPU power, and instead uses only 0%-20% depending on what I'm doing. This, however, is not a viable long-term solution for a couple of reasons: 1) it screws up my tray icons, causing many to disappear even though their parent programs/processes are still running, and causing others to appear even though they shouldn't be there; and 2) subsequent instances of explorer.exe such as for directory navigation still have some performance problems and are prone to crashes.
I need to know how to repair or replace explorer.exe without having to format my hard drive and re-install (either from scratch or using a system recovery disc). I can try using some sort of shell replacement such as Aston, Emerge, or GeoShell, but I shouldn't have to do that.
It may be that one of my other startup applications is causing some sort of compatibility issue, but that seems unlikely since I haven't made any changes to the system, nor installed any new software other than standard windows updates.
I need help, advice, suggestions, etc., or really anything at all that I can try that might fix this problem. In the meantime, I am going to boot into safe mode to see if explorer.exe has problems even then (which would solidly indicate a corruption of explorer.exe rather than a compatibility issue or anything else).
Please help if you can. For reference, I am using an HP Pavilion dv9700 CTO Entertainment Notebook PC, running Windows Vista Home Premium 32-bit with Service Pack 1. I have an Intel Core2 Duo T9300 2.5GHz CPU and 3GB of RAM. My explorer.exe file gives the following information from the Details tab of its Properties window: file version is 6.0.6001.18000; product version is 6.0.6000.16386; file size is 2.79MB; and modification date is 1/20/2008 at 6:24pm. As far as I know, that is all correct information and does not indicate that the program file has been replaced by any sort of malicious software. I also ran a complete scan with AVG Antivirus and found no viruses or other malicious software anywhere on the system (unless you count tracking cookies).
Thank you in advance for any help

Edward Lin wrote:
I have exactly the same problem!!! And I concluded that the “AUTO CONNECT” function is the main reason of causing the CPU usage. If I uncheck the “AUTO CONNECT” from the saved wi-fi connection, then the CPU would remain claim.
But.. Still, it’s very annoying. So I formatted the hard drive and restore to the original factory condition. Initially, it was working ok. But after WINDOW UPDATES, the same problem happens again!!!!!! May this be the bug from Microsoft??
Any thought?? Any Fix? Please help!!!!
Yes, I did notice that the problem started after I did a Windows Update. I can't remember which update it was, but the strange thing about it was that I couldn't fix the problem by restoring the system to a restore point that was made BEFORE the update. Since I hadn't made any other changes to the system between when it worked and when it stopped working, I can only assume that the update caused the problem, and as such I believe it IS Microsoft's fault.
As to the Auto-Connect feature, I hadn't even thought of that, but since I use my internet ALL THE TIME, it would be really annoying to have to manually connect every boot up.
Which brings me back to the workaround. If you have Auto-Connect enabled, and you disable WLAN AutoConfig and set it to Manual in your Services interface, then reboot the system, does it solve the CPU issues? If the answer is yes, then you can do what I'm doing:
1. Go to Start, then in the search box type "task" and you should see the Task Scheduler come up as an option.
2. Open the Task Scheduler and click on "Create Task..." (by default this should be on the right-hand side of the window in the Actions pane).
3. In the General tab, give the task a name and (optionally) a description, and put a check mark in the box at the lower left that says "Run with highest privileges".
4. In the Triggers tab, add a trigger. In the new window, choose "At log on" from the dropdown box at the top, set it to run for "Any user", and then head to the advanced settings section of the window. Put a check mark in the box for "Delay task for:" and set the delay for one minute. Make sure that there is a check mark in the box for "Enabled". Then click OK.
5. In the Actions tab, add an action. In the new window, make sure that "Start a program" is selected in the drop down box at the top (should be the default choice). In the field where you specify the program to run, type in "SC". In the "Add arguments (optional):" field, type in "Start wlansvc". Then click OK.
6. Go through the other tabs to make sure you're happy with all of the other settings. The default values should be just fine, but feel free to change them if you want to. Then click OK.
7. Make sure that WLAN AutoConfig is still set to Manual.
8. Re-enable your Auto-Connect feature.
9. Reboot the system.
About 60 seconds after you log into your user account you should see a black command window flash onto the screen and then disappear again. That is your automatic task running and starting up the WLAN AutoConfig servicve. Another 30-60 seconds later and you should have access to your wireless network and the internet, and you don't have to interact with it or manually start anything. You can also try setting the task delay to 30 seconds rather than 1 minute, but on my system that wasn't a long enough delay to prevent the CPU usage issues, whereas 1 minute was sufficient. On my system, it enables the wireless before the system even finishes loading up my normal startup applications like my antivirus, so Idon't even notice a slowdown on the bootup process, let alone any wait time before I can use my internet.
This isn't a fix, and what we really need is for Microsoft to figure out what they did wrong, and fix it, but in the meantime, this works.
Good luck
On a side note: Unless Microsoft gets busy on fixing Vista so that it's backwards compatible with my old games, I'm still going to downgrade to XP (like a LOT of people have been doing for various reasons)... assuming I can find XP compatible hardware drivers anyway. Right now I can get more of my games to run under Linux than I can under Vista, despite the fact that they were programmed to run in a DirectX Windows environment only... that's simply unacceptable.

I need to downgrade from version 3.6.10 to 3.6.9 in order to use .jpg in my blog. How can I downgrade? I can't find the older version on the site.

When I attempt to insert an image (.jpg) in my blog, the title (if used) appears, but the image doesn't. Images that worked before I upgraded to version 3.6.10 will not load now either, but the images that were inserted before the upgrade are fine. Blog-city tech support says this is a known issue with 3.6.10 and that the only fix is to downgrade to 3.6.9.

I did that :
Open Terminal
1 - wget http://rpms.famillecollet.com/remi-release-8.rpm
2 - sudo rpm -Uvh remi-release-8.rpm
3 - sudo mousepad /etc/yum.repos.d/remi.repo
Make sur that in remi section enabled value = 1 and in test section enabled value= 0
4 - sudo rpm -e --nodeps firefox
5 - sudo yum install firefox
It was successful for me after many hours to look for the right answer

Cannot get mail message keeps me from using a mail account. Yes I don not remember the password that I used of the user name. How can I reset this?

I don not remember the passwd or the user name for an email account. how do I reset this account?

OK, hubby figured this out for me. Apple support were nice people but could not get the answer. Network Solutions online info was incorrect or incomplete. I do not remember exactly. However, the email that Network sent was EXACT. No info as to password reset but they gave the correct port numbers and .....Connection!

In the closure of Adobe, the process remains active and takes too much resource processor. Expected results:The process AdobRd32.exe has to be correctly closed.

In the closure of Adobe, the process remains active and takes too much resource processor.
Expected results:The process AdobRd32.exe has to be correctly closed.

I'm not sure on a Mac, but when I have this issue, I simply kill the thread (task-manager/processes/select the process, kill thread)
I have had no ill effects doing this.
It is my belief, it is the cloud, since they have a dcc connection, you can disconnect from the cloud, close everything, and the cloud is still connected to you. This is a feature of their update process I suppose.(speculation) Additionally, I remember reading somewhere this issue was due to applying administrative permission at the instigation of the installation. (which I do allow *some* trusted companies to have this so updates can be applied during my downtime. )
I have never had any overt issues after killing the thread and I have done that many times.
Hope this helps

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

Yosemite OS is consuming too much internet data in the background

Yosemite OS is consuming too much internet data in the background for no apparent reason. It's draining my monthly internet quota. It's important to note that iCloud Drive and photo stream are disabled. Anyone knows how to sove this problem? Otherwise, if there's no solution I think I'll downgrade to Mavericks.

I'm wondering if you ever resolved this issue. My internet access is via satellite with highly allocated data usage. Ever since updating to Yosemite, my usage has gone through the roof. I've disable automatic downloads and any settings (including iCloud photo stream) that might receive or send data, plus I never use Spotlight. Data usage goes to zero when I shut off WiFi, so it seems obvious that something running in the background is the culprit. Apple is looking into this, with no results so far - meanwhile, I've lost hours of time playing detective, and hoping my ISP won't cut me off. No fun!
Thanks for any ideas you have...

Tablespace temp grows too much when using OBIEE

Hi gurus,
i´m using OBIEE 10.1.3.4 . When i´doing a select over a materialized view, the tablespace temp grows too much ( about 15GB).
The columns of the materialized view are functions.
The base tables of the Materialized View are big, thousands of MB.
Is it possible to configure the tablespace temp with OBIEE? and via SQL-PLUS?
Best Regards.
Roberto.

you can do it with Oracle Enterprise Manager, that is much easier way. If you don't have access to OEM and has privileges to alter table space. the command is something like
alter tablespace ts_sth add datafile \etc\temp.dbf' size 4M autoextend on;

I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

Use DropBox. https://www.dropbox.com/help/84/en
 Cheers, Tom

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

I have a 32 gb ipad air but need to get the songs stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb so far too much to put on my ipad air. How do I get them off my old iMac which

I have a 32 gb ipad air but need to get the songs I have stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb. far too much to put on my ipad air. How do I get them off my old iMac which has no internet connection ? And where do I put them. Any help would be appreciated

No I don't have another computer. I was thinking initially I would put them on my ipad but since I don't have enough gb maybe I can store them in some cloud thing? Sorry am a bit of a Luddite when it comes to all this. I just need to have them stored someplace and accessible to play when I need to. Thanks for your help.

My iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much. This is the worst experience Apple

my iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much. This is the worst experience Apple

Settings>General>Reset>Reset all settings.
*Note:* Settings, preferences, network settings, etc *will* be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF)
If you want to voice your opinion, please do so here:
http://www.apple.com/feedback/

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

Too much resources use by the iOS6.0.1. How can I downgrade ?

Similar Messages

Maybe you are looking for