Tool used for knowing the performance

Which is tool used in oracle to know the performance of the query executed with time taken for execution???

hi
In SQL plus, please use the below command and then run the Query to know the time taken by the query.
SQL>Set Timing on
Regards
K.Rajkumar

Similar Messages

  • How can i use Bi-Technical Content is used for measuring the performance of

    Hi
    recenetly i implemented the BI7.0 for one client. I want to know how to use 'BI Administraction Cockpit,.
    Actual what technical content does ???
    And how can i use technical content or statistics for measuring the performance of my queries. Please let me know
    kumar

    Hi Ravi,
    BI Admin Cockpit is enhancement of BW Statistics.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
    Check this thread also:
    BI Statistics comparision with the old
    Regarding the performance check the link below.
    Re: Query - Performance
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
    Regards,
    Anil

  • What method should be used for resizing the particular JTable Column width

    I have a four table. Only one table which are on top have a table header. I want that when user resize the topmost table with a mouse other table colume also be resized automatically. So I want to know that what method should be used for resizing the particular JTable Column width.
    Thanks
    Lalit

    maybe you can implement a interface ComponentListener as well as ComponentAdapter with your topmost Table.
    for example:
    toptable.addComponentListener(
    new ComponentAdapter(){
    public void componentResized(ComponentEvent e){
    table1.setSize(....);
    table2.setSize(....);
    /*Optionally, you must also call function revalidate
    anywhere;*/
    );

  • HT5878 how to check the detail of font being used for reading the file received by an email

    I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
    Thanks

    You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
    openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
    The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
    You can also point this at your partner's SMTP server as well.

  • What is Cinema Tools use for?

    I had asked this question in the Cinema Tools forum, but haven’t gotten an answer, so I thought I’d asked here.
    Can somebody explain to me what is Cinema Tools use for?
    I have been using FCP for some time now and have never open Cinema Tools
    What does it do?
    Thank you

    Perhaps checking the online help or the manuals would help. I can't give you a definitive answer, but let me tell you what I've used it for. Film is normally shot at 24fps. When it's transferred to video it's slowed down to 23.986 fps and then 3:2 pulldown is added (fields are repeated in a particular order) to change the frame rate to 29.97 fps without changing the speed. There are several reasons you might want to remove this pulldown and restore your film to a progressive 23.986 frame rate.
    I'd suggest opening the program up and exploring the menus and looking up any terms you don't understand in the manual.
    Message was edited by: Michael Grenadier

  • Some tools used for upgrade project

    Hi experts,
    I am looking for some tools used for upgrade project.What are the frequently used tools in an upgrade project.
    Regards,
    Kiran

    Hi,
    There is no specific tool for the upgradation. it dependts on organization. if it has developed its own tool means that is used for the upgradization. noramlly company gets the project based on the presentation of their tool.
    our company has a great tool for the upgradization. which find out all unicode related errors and changes that has to be done in new verion.
    like this each organization might havedeveloped their tools.
    Regards,
    Anki Reddy

  • System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

    Greetings    
                                        - Our critical server image backup Fails on one
    server -
    Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
    partition on each source hard drive is not included.
    Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
    Server A good.
    Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
    disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
    At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
    "The system image restore failed. (0x80042403)"
    The destination drive is Not "Excluded".
    Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
    Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
    Tried the earliest dated B image rather than the most recent, fail.
    The Server B backups show as "Success" each night.
    Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
    Restore still fails.         It looks like its to do with the image rather than with the hardware.
    Tried unticking "automatically check and update disk error info", still fail.
    Server A  SRP 100MB  C: 50.6GB on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Server B  SRP 100MB  C: 102GB  on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Restore-to hard drive is also Seagate ST3500418AS.
    http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
    "If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring."  Doesnt apply here.
    http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
    for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
    Thank you so much.

    Hello,
    1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
    You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
    2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
    3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
    correct order in the hardware.
    4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
    bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline. 
    5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
    should be present with minimum size requirement.
    6. Some other requirements are discussed in following newsgroup threads:
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
    Regards,
    Vikas Ranjan [MSFT]
    ------- This information is provided as-is without any warranties, implicit or explicit.-------

  • Which  Function Module is used for converting the DATE in BDC

    HI,
    Which  Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

    data : date like sy-datum.
    data : odate(10) type c.
    date = sy-datum.        " in format YYYYMMDD
    CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
      EXPORTING
       input         = date
    IMPORTING
       OUTPUT        = odate         .
    write:/ odate.  "in ur format '.
    1.
    In ur itab make a field for date as 10 characters and use this Fm to store the date .
    2. Pass the date as the charcter field to the screen and now check .

  • What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

    What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
    I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
    Mangal

    Hi Jim,
    I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
    Web Service & XML
    http://myserver_url/admin/ManageResourceKey
    <request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
    <nonce>" . $nonce . "</nonce>
    <expiration>'. $expiration .'</expiration>
    <resourceKey>
    <resource>resource_id</resource>
    <resourceItem>1</resourceItem>
    </resourceKey>
    </request>
    Error Message
    <error xmlns="http://ns.adobe.com/adept"
    data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
    Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
    Magal Varshney

  • What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

    What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

    tacbob wrote:
    Are there any tutorials? I cannot find anything close.
    http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
    The MacBreak Podcasts are an excellent source of info!
    Have a look on the others ..

  • Is there a linear equations VI thatI can use for inputting the coefficients with variables attached to them? Thank you.

    Is there a linear equation VI that I can use for inputting the coefficients with variables attached to them? I am currently studying elec engineering and am in the thick of transient analysis. It is very time consuming figuring the mesh and nodal analysis in the transform domain. With 3 branches in a mesh analysis the resistors, inductors and capacitors are represented with variable s in them. I need to determine in the transform domain then convert to the time domain. One equation goes like this: (3+2s+1/4s)i1s - (2s)i2s - (1/4s)i3s = 6/s -6. The other equations are similar. I must keep the variable s in the equation and solve it with s in the result. I made several VIs for determining simultaneous linear equations some for complex numbers and they work great. This one has me a little stumped. I thinking that maybe Labview doesn't have a VI for this. The other VIs were fine because you just plugged in the numbers and ran the VI and got your result. Any VIs that do LaPlace transform operations?
    Thank you.
    Tom

    Hello Tom,
    You can find a VI for doing Laplace transforms in Functions->Analyze->Signal Processing->Frequency Domain (this VI is only available in the Full and Professional versions).
    You may also find the following tutorial of help in working with linear systems in LabVIEW.
    Linear Systems in LabVIEW
    Keep up to date on the latest PXI news at twitter.com/pxi

  • Which T code is used for entring the pricing condition P101 for purchase or

    which T code is used for entring the pricing condition P101 for purchase order

    Hi jitendra ,
    if you are looking for T-codes use:
    SE16 and scan table TSTCT.
    Regards Mario

  • Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

    Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
    Appreciate any quick response around this.

    Hi,
    Transaction date  will be your autoinvoice master program submission level date (If you haven't setup any logic.
    Please check the program level default date, if user enter old date ststem will pick the same.
    Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
    CAUSE
    Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
    SOLUTION
    1.Ensure that there are no scheduled workflow background process run.
    2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines"  at Responsibility level only as Yes.
    3.Now switch the responsibility to which the profile is set.
    4.Create order for Non-Shippable Lines and progress it to invoicing.
    5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
    6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

  • Use DB Connectivity tool, can I know the database is open by another user without opening it?

    hi all,
    A urgent issue here, is it possible for me to know whether the database is being used by the other user without opening a databse using Databae Connectivity Tool?
    Can anyone know the solution?

    Duplicate post: http://forums.ni.com/ni/board/message?board.id=170&message.id=511732

  • Which tool is used for Oracle 11g performance tuning?

    Hi all
    I used statspack for 9i's performance tuning.
    But with 11g R2 now I want to know which way are you using to do performance tuning?
    Statspack? OSW? RDA? ADDM? Or other ways?
    Thank you.

    schavali wrote:
    I would start with Automatic Workload Repository (AWR) reports to identify the bottleneck
    MOS Doc 390374.1 - Oracle Performance Diagnostic Guide (OPDG)
    MOS Doc 748642.1 - What is AWR( Automatic workload repository ) and How to generate the AWR report?
    HTH
    SriniThanks for your answer.
    To read the MOS documents I need a Oracle Customer ID , is that right ?
    (Where to get that ID ? Our company bought Oracle 10g without any Customer IDs in it )
    Best Wishes.

Maybe you are looking for