Top level from exe

I wouold like to be able to find out what VI was set as the start up VI when an executable was created.
I want to be able to read the VI Desc property of the Top level VI in an Executable ....but from another
executable.
Thanks

Hi Partha,
I'm sorry you had trouble with "exe_miner.vi" - see warning #1. >
> What could posibily be wrong with my approach ?
Well, if you were to select a .VI instead of an .EXE, or select an EXE that wasn't created with app. builder - then that could explain error-messages!
Like I said, I tested this on just a few .exes. If it doesn't work for you, maybe it can be fixed. The VI chops-out the last 4096 bytes of the target EXE. If you wire this string to an indicator. Enable "\" codes, cut/paste the string into a .txt file, then attach the file, I'll work on making the "exe_miner.vi" handle a wider class of VI(s). Note, exe_miner.vi is basing it's search on a particular character-sequence ("LVARLBVW") if this doesn't appear in the last 4096bytes, that could be a problem.
Cheers!
Message Edited by tbd on 03-28-2007 02:30 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Similar Messages

Cannot Create Folder at Top Level of Documents Library

Operating System: Windows 7 Enterprise, 32-Bit
Environment: Windows 2003 domain
Security: Local Machine admin, and domain admin
Documents Library is redirected via Group Policy to
\\servername\home\username
Navigating to Libraries\Documents, there is no "New Folder" button available at that top level of the library. When using File menu => New => Folder, I get "Unable to create the folder 'New Folder' File system error (512)."
Looked that one up using Google, er, I mean Bing, and found articles about it being an old DOS\Win95 issue with the 512 max limit on the root drive. Am familiar with that problem, and this ain't it. Less than 30 folders at the root level, and none more
than 20 characters long.
From inside an Application, if I try to save to my Library\Documents folder, I cannot save a file to the root level. I get "To save here, you must first include a folder in the Library."
At this point where I am looking to save a file, I also cannot type a folder name for navigation, as I am used to doing with previous OS's. So in my address area, I have Libraries\Documents, then I have a subfolder called "important." If I type
the word "Important," expect the system fo navigate down into that folder. Instead I get "To save here, you must first include a folder in the Library." If I type "Important\" I still get the same error.
Navigating to \\servername\home\username, I am able to create a New Folder at the top level from a Windows Explorer window, or from inside an application such as Word.
Mapping a drive letter to \\servername\home\username also will allow me to create a New Folder at the top level, from a Windows Explorer Window, or from inside an application.
From a command prompt, I am able to get to the drive letter and create a new folder.
With the drive letter mapped, going back to Libraries\Documents, I am still unable to create a new folder that way.
I read these two threads, both of which sort of die off with no real answers. So I've started my own.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/4ea2f28f-8487-40cf-abb0-745916e72b7a
http://social.technet.microsoft.com/Forums/en/w7itprosecurity/thread/ae2505ce-8a6b-493b-9473-a0dca215fd34
Any Help?

Hi,
Regarding your problem, it seems that the user didn’t have appropriate permissions to create folders. To get it work, NTFS and Share permissions must be configured
appropriately.
Here are the Share and NTFS Permissions needed on the File Server Shares and the steps to do so:
NOTE: The $ symbol should be used to hide the existence of the share.
User Home Share Configuration:
Here are the Share and NTFS Permissions needed for Home Directories:
a. The Share permissions (Sharing Tab): Share Named: <HOME>$
Administrators: Full Control
System: Full Control
Authenticated Users: Full Control
b. NTFS Folder Permissions (Security Tab): Turn off inheritance on the Folder named <HOME>, and copy the permissions. (Uncheck "Allow inheritable permissions
to
propagate to this object")
Administrators: Full Control
System: Full Control
Creator Owner: Full Control
Authenticated Users: Read & Execute, List Folder Contents, Read
c. On the NTFS Folder Permissions Click the Advanced Button. Then highlight Authenticated Users, Select View/Edit
d. On the Permissions Entry for <HOME>, "the Apply onto" change to: "This folder
only"
e. Click OK
f. Click OK again.
More reference, please read the following document:
Windows Server 2008 Share/NTFS permissions on home
directories/folders
Redirect the Documents folder to a network share
Please note: we provide the third party link for technical use
only. There may be some changes without notice, Microsoft doesn’t guarantee any accuracy on contacting information.
BTW, as this issue is relevant to Windows Server 2003, please post in
Windows Server forums for solution as well.
Hope it helps.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

In application builder the top level vi is always set to "run when opened"; how do I turn this off so I don't have to change it each and every time I build a .exe??

I build a lot of executables using Application Builder under LabVIEW and in every one I build, I don't want the top level vi to take off and run when I open the executable. Currently, I edit each .exe I build within Application Builder and change the option of "run when opened" from Yes to No for the top level vi. All the other subvi's are already set to No. It would seem as though there should be some way to "turn this off" if you will so the top level vi is not always set to "run when opened" by default within Application Builder. Is there such a solution that anyone knows of?? Any help would be apprec
iated... thanks...

Indeed the Application builder forces "run when opened" to true for top levels VIs. If you don't want your VI to make any real work when the application starts, you should simply put a do-nothing loop in the beginning of the VI that will loop until the user presses a boolean. It will be more intuitive for users to press a Run button on the FP than clicking on the white Run arrow in the bar.
LabVIEW, C'est LabVIEW

In List View, how can I move an item from within a subfolder up to the top level of the window's parent folder?

Up 'til now, from System 7.1 to Tiger—I skipped Leopard—you simply dragged the item onto the folder window's titlebar (since that folder's icon was, naturally, not in its own window) and BINGO! there it was, at the top level. Nothing I can think to do in Snow Leopard seems to work.

Thanks. Most definitely does, although when experimenting I found the left window edge was closer, and 'scrubbing' the item just out of the window and back in seemed to fit the underlying file and folder metaphor better to my mind than just dropping it any old where in the window.
And 'any old where', at any old speed doesn't always bring up the oh-so-subtle blue border that says, "I get it, you wanna add something to this window, hit me." That's The Clue. There seems to be an invisible line you hafta cross, and some kind of deliberate pace you hafta hit. Too fast and SL doesn't seem to always take it seriously. But that left edge scrub can be quite fast.
Sorry about the over hasty denial, I was checking my facts and editting to say you were right when the board was shut for some sort of maintenance, and my bad became permanent. Please forgive.

Add a list from a subsite to the top level site SharePoint 2013

Hello, I am trying to display a calendar from sub site to the top level home page and cannot seem to make it happen. I have opened the calendar in SPD and saved that as a webpart file to my desktop and then uploaded into the app gallery and web
part list and when I go to add it to the top level home page I get the following error: 'List does not exist' 'The page you selected contains a list that does not exist. It may have been deleted by another user." Any idea?
I am running 0365 w/SharePoint 2013.
Thank you!

Hi,
Please perform the steps below:
Access calendar list in subsite, in the Customize List tab, click Edit List. It will open SharePoint Designer.
In Views tab, click Calendar, it will open list view in Advanced mode, and you will see code.
Delete the part between <ZoneTemplate> and </ZoneTemplate>
click INSERT in the toolbar > DataView > click calendar list > List View Tools bar appears in green color.
Click WEB PART, save web part to site gallery (ensure you have site-level admin permission)
Access root-site, insert web part to page, the web part is in Miscellaneous category.
For clearly:
Regards,
Rebecca Tu
TechNet Community Support

Nonsensical top level PDF bookmark in Crystal report exported from InfoView

Thank you for any help or suggestions!
I am using Crystal Reports 2008, the CMC repository, and InfoView. I am producing PDF reports, many with bookmarks based on the group tree.
I have found that when I run my report off my workstation, all is fine, but when I run the same report out of InfoView, the top level bookmark is a string of nonsensical numbers and characters.
Is there a way for me to ensure that this top level bookmark is something readable, perhaps the name of the report?
Thank you for your help!

Hi,
I ran into this problem just recently myself. The report would export just fine out of the designer but when I would try to export it from CMC it would give me a root bookmark named along the lines of "~crw{33FB2DCD-838A-(more gibberish)....}.rpt"
I eventually figured out how to solve it. I am using Crystal XI R2, not 2008, but I suspect you may be able to resolve the issue using the same steps. I believe that the gibberish name that you are seeing is the actual technical name of the report as it is stored on the Enterprise server. In order to get it to display a nice formatted name of your choosing, open up your report in the report designer. Now go to the File menu and select Summary Info. In the Title section, provide the name of the report that you would like to see at the root of the bookmark. You are esentially setting up an alias for it. Now when you export, you should see the new name that you typed in as the main part of the bookmark.
Hope this works for you!
Edited by: Wjrudo on Nov 30, 2009 8:55 PM

Passing data from a subvi to the top level with continuously running loops

Hi All,
This is a very simple question, for some reason the data available at a subvi indicator is not making it to the top level vi. I think it might be something to do with the while loop I am using but I cant figure it out, any help will be appreciated. I don't think I fully understand how the data gets out of a continuously running loop.
GPSdisplay runs a driver called GPS.vi (im not worried about my event structure just yet which might be wrong, but I am yet to test that bit yet) Probe 1 should have the values from GPSCluster
Loop within GPS.vi. GPSCluster (Probe 2) is being updated correctly
I cant work out why the data is not being passed to GPSCluster in the top vi
Solved!
Go to Solution.

Hi bennymacca,
I think you are on the right track with an FGV. You can do this fairly easily with the GPS vi that you have.
Before I go any further, your GPS while loop will only return the last reading, and because the "Read" boolean output state is FALSE, it will not stop. Do you see it exit at all? From the logic I read, once entering this while loop it won't stop until told to.
There are a 3 options you can try.
1) Use an FGV, as you are looking into. To do this you will need to change the state boolean to TRUE and put shift registers in for the GPSCluster - to parse the information around, holding it each time the vi is called and exited. Outside the while loop you will wire up the Cluster to the indicator that you wish to collect (OR, you could have it inside the case statement where it is read - be careful here, though).
2) in the main code, above the sequence frame you can place the GPS vi while loop (the "Read" one), having the state boolean wired to a Stop button local variable. This while loop will start depending on how LV feels, so wire an error line to both the While loop and Frame start (indicating that both are to run in a parallel fashion), OR you can put it in a case statement and say 'go' when you want to start reading. With this while loop, you can then output the Read data directly into your Cluster variable as it is generated.
But, with (2) you are moving yourself away from the purpose of the GPS vi, which would be to bring all functionality of the GPS functionality into one sub vi - which is a good idea.
3) put a condition on the "Read" case statement boolean state - only make it TRUE when you wish to stop reading data (do you have a time or condition you can refer to here?). Even doing so, you would/may still need shift registers on your while loop to retain data for each iteration.
I hope all of that helps. Cheers. David.

How to remove the worksets from the Top level navigation for the ESS role.

Hi All,
I am working on enabling and disabling certain services in the ESS worksets.
we are using EP 7.0, ECC 6.0 (NW2004s).
When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
Thanks for your help
Regards
SM

Hi,
Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property.

SharePoint 2010 Content from top level site hidden from search results on subsite.

Hi Everyone,
The issue I am having is that when a group of people are in there site, we'll call it site B, and they hit the search function, they only get results from site B and subsites of site B, but nothing from the top level site, site A. does anyone know of anyway
to get results from site A when searching in site B? This would really help me out a lot.
Thanks!
Best regards, Mike

Hi Mike,
According to your description, my understanding is that you want to display the content in top level site in search results page when doing search in subsites.
By default, the search scope is set to This Site in all sites, so the search scope in subsites is limited to the subsites.
I recommend to create a Search Center and then edit the Search settings in the top level site settings, please refer to the image below:
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Can we control the top level navigation in portal from a java application

Hello,
I am having a scenario where User logged in to portal and assigned with 2 roles (HOME , ISA(Java application)). When user opened a form in ISA (Java application) and tried to enter the data in form and moved to another tab (e.g. HOME) in top level navigation.
When user come back to ISA (Java application) TAB , we show the page where he left earlier. I would like to know if user click any other TAB in top level navigation (Role assigned to him) while working on a page in ISA(Java application) is there any way we can catch that event before he leaves from ISA (Java application JSP page) to other TAB?
How can we control the top level navigation events in the portal from a java application .Since Top level navigation is seperate par file.
Thanks,
RN

Dear Rajesh,
Top Level and detailed navigation values comes with iteration in the respective par file.
Please check the par file and based on the value (i.e tab name) selected, you can write your code.
Best Regards
Arun Jaiswal

Name from the Top level Parent

I need to write a property to retrieve value from the top level node. My current heiarchies are:
A1
     A2
          S1
          A3
B1
     D2
          S1!Shared
          B2
C1
     C2
          S1! Shared
          C3
The required property is to check for the shared node and if the top level parent is A1, then create a property value with A.S1. Similarily, if it is B1 then B.S1 and so on. I am thinking this can be achieved by creating a list, derived property using the top level parent name. ex,
List     Value
A1     If shared node then concat A+Name
How to achieve this?

The nodes A1 B1 C1 are they part of the same hierarchy and child nodes under the Hierarchy Top Node? or is the scenario something else?
Thanks
Denzz

Posting from Top Level WBSE to AUC

Hi Friends,
I am facing problem in doing settlement from Top level WBSE to AUC. I feel I have done the required settings. I am not able to generate settlement rule for the top level WBSE. Please help me out. I would appreciate some screen-shot help from anyone.
regards
Pratap.V

Hi,
Captain Caveman: I want the settlement from the top level WBSE to AUC get generated automatically. My Top level WBSE has an Investment profile. AUC is created automatically only. Since the settlement rule did not get generated automatically, I tried to set the rule manually. Still the system is not allowing me to do. Top level WBSE is acc assigned.
Steve: In my settlement profile, I have given the default object type as FXA.
Subhrajyoti: I have checked the asset class. The asset is not blocked. Also the status of AuCi s set right.
Thanks guys for your replies. I will do the whole process again.
I will check and let you know the results today itself.
thanks
Pratap.V

Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document.Line.

Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document. This can be the
result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format. Please who have the idea of how this issue can be resolved?BI Developer

Hi ,
for this Error one and only one solution
go to view Code, line number and Column number shown in error message,
and Remove code from there till last and save it, it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
something like this
andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0">
<control>
<ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" />
</control>
<layoutobject>
<ddsxmlobj>
<property name="LogicalObject" value="{BBFB0E
Remove this code and save package it will work.
hope this will help to Developers who are searching for same ......... :)

View Calendar on subsite (from top level calendar)

Hi,
I have a top level site and then 4 subsites (IT, HR, Support & Finance).
On the top level we have a Master Calendar that houses ALL PTO, Training, Meetings etc. We then separate views depending on what filters we have in place (Team, On-call etc)
I am looking to embed a web part on each of the subsites that pulls the "team views" from the Master calendar to their respective subsites, any ideas?

Hi,
Please refer to the similar post. You can simply achieve this using page viewer web part or use the similar technique mentioned in the below article.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/4da6e19b-64b9-4081-b548-d944d7386f44/share-list-across-subsites-2013
http://blog.pathtosharepoint.com/2009/01/22/a-simple-method-to-display-a-list-in-another-site/
Please don't forget to mark it as answered, if your problem resolved or helpful.

Accessing a function from a movieclip form a top level layer

Im having a dillema. my whole game rests on being able to
access functions from a movieclip inside a movieclip in a top level
layer called "Cards" to another layer called "Functions". I've used
this code:
play_modifier_card(this.num.text);
to access this function:
function play_modifier_card(card_num){
trace(card_num);
It works OK when the function is in the movieclip but not
when it is in a top level layer. I tried
"_root.play_modifier_card(this.num.text);" but it didn't work. Any
help appriciated. Thanks in advance.

_global.play_modifier_card(card_num) {
trace(card_num);
}

Top level from exe

Similar Messages

Maybe you are looking for