Toshiba p200 will not start

Hi,
Please advise. My Toshiba p200 just won't start. With the power cord in (it works as I've tried it on my other toshiba laptop - and the battery is ok) there are NO LIGHTS and pressing the on button makes no difference.
I've tried taking the battery out and pressing the on button for a minute or two, then reconnecting the power/battery and this makes no difference.........there is just nothing. The laptop worked perfectly last time I used it.
Any ideas gratefully received.........hoping to avoid an expensive trip to a specialist. Is this likely to be a dead motherboard?
Thanks
Rikky

dokie, you just gave me an idea. 
op, do you have a multimeter.  If so, you can do a few things to determine where the power is, is not, and measure for proper voltage, continuity and such if your game.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Similar Messages

  • Toshiba C655 will not start up

    I have a Toshiba C655 with a good (tested) AC adapter that will not charge the battery nor will the AC connected light come on when the AC adapter is connected.  I tried the twisting the case trick to see if the power connector on the laptop might be loose but that did not work.
    What other testing can I try I seem to not be getting any power to the laptop.  I have tried this with and without the battery installed.
    Any ideas would be appreciated.  I fear it's the motherboard at this point.
    Dave_in_TX

    Can you send me a PM with your serial number so I can look into it?
    Click here to send me a Private Message.
    - Peter

  • Satellite L505D-LS50​06 Toshiba Laptop will not start up

    I own a Satellite L505D-LS5006 laptop from Toshiba. A few days ago, I attempted to start the computer up, but when I pushed the power button, it would look and sound like it is turning on, but wouldn't. The cooling fan runs and the disk I have in the drive spins but nothing appears on the monitor and the computer's amber colored light signaling something is loading does not light or blink. The wireless networking light also blinks and then stays off. When I called Toshiba's help line, the guy told me to remove the battery and press the power button for 10 seconds, replace the battery, and try it again. When that didn't work, he said to try it again but with only having the AC adapter plugged in, after that, both the battery and the AC adapter plugged in. None of that worked. I'm sure nothings wrong with the hard drive since I was working on it offline the very night before when I placed it on hibernation mode and then placed the computer back in it's bag. I also know I need to replace  the battery in it as the computer PC Health Monitor told me I have a "Poor" battery. Please help me with this situation, there are important things I have on this computer that I need.

    I'm not a tech support agent, but it sure seems to me that it's time to arrange a repair. If you want to recover data first, you could try removing your hard drive and connecting it another PC before repairing the laptop.
    - Peter 
    - Peter

  • Toshiba Satellite A305-S6872 Will not start up

    I have the above mentioned computer and it is 2 years old. Last year in January the hard drive crashed and had to have new one installed at Best Buy. Now it will not start up. When I turn it on the Toshiba screen displays with F2 and F12 options. Then the creen goes black and the following displays:
    Intel UNDI, PXE-2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation
    For realtek RTL8101E/8102E PCI-E Ethernet Controller v1.07 (080320)
    PXE-E61: <edia test failure, check cable
    PXE-MOF: Exiting PXE ROM
    No bootable device -- insert boot disk and press any key
    I insert the recovery CD and it says windows loading files then has a screen that says Selecting a Process: Toshiba Recovery Wizard or System Recovery Options. I choose System Recover Options and then choose English language and US keyboard layout. Then the following screen comes up: Select an operating system to repair .... If you do not see your operating system listed click Load Drivers to load drivers for your hard disks. When I choose Load Drivers I do not know where to find the OS driver. When I click Next and choose Startup Repair it says it is unable to fix the problem automatically.
    I don't want to choose Toshiba recover Wizard because it says it will erase everything. Does anyone have any suggestions on how to fix this problem? 

    The exact same thing happened to me yesterday Feb 5!!!
    During normal use of windows 7 the computer crashed and went through the same boot procedure as described by the previous poster.
    Now I can't do anything with my hard drive. I tired everything. I even tried restoring it from the backup image that I have, but it said that it cannot find hard drive!
    I do not have Toshiba Recovery. Can I download it from somewhere?
    Does anyone have any suggestions? After booting from Win 7 Recovery Disk, I even tried fixing the MBR and partitions, but I would always get an error message that the system doesn't support the software I tried using (guessing because it's 64bit?)
    Please, any suggestion is most welcome and appreciated!!!
    Thanks,
    Djape

  • Win XP on Satellite M30X will not start after accu went flat

    XP on M30X will not start any more after accu went flat! Safe mode , latest working .... nothing works!
    The recovery CD offers 3 options1: new installation, 2 toshiba recovery utility ( expert mode) und 9 exit.
    How do i get to the recovery console of XP or how do i use 2 to restore the system without loosing any files.
    Thanks for any hints.
    This is a nite mare .....
    wolf
    have a nice day

    Thank you all for your help!
    I bought a new hard drive and reinstalled everything.
    I got a smart drive USB casing for the corrupted hard drive and connected it to the laptop.
    First it couldn't read any thing on it and it wouldn't run a scandisk. So i run a scandisk on 'my computer' which included the connected smart drive.
    Took a long time ... went to bed after 2 hours and when i got up and restarted the laptop, the smart drive was accessible and i could transfer all my files etc.
    I don't know what it did over night, but it worked.
    I reinstalled the old hard drive to retrieve some program data and it runs on windows again and everything was nearly like before, just the system restore wouldn't run and after a scan disk etc it still won't run.
    great.
    have a nice day
    wolf

  • Windows will not start on my NB100

    I think my nb100 has become infected with a virus. It was doing some strange virus scan and I could get it to do nothing else. I turned it off and now Windows will not start. I have tried all the option; safe mode, safe mode with command prompt etc. but nothing works. I cannot run the product recovery disk because this netbook does not have a cd drive. Can anyone help?

    > . How do I make a bootable USB drive?
    You can make a bootable usb drive in 2 ways:
    1. Manually with command prompts
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53324&tstart=60
    2 Automatically using programs like WinSetupFromUSB or Novicorp WinToFlash
    http://myeeeguides.wordpress.com/2008/11/15/winsetupfromusb-install-windows-xp-from-usb-flash-drive/
    Message was edited by: Jeka-??

  • Satellite A105 Reboot, will not start up

    Hi....
    Laptop belongs to my wife and this morning I am told that it will not start up.
    Problem is .... Begins to start and shows symptoms of previous post by tommy1980murf.
    Quick flash of a blue screen with text, then moves onto options for Safe Start, Safe network start ...etc...
    No matter which optoin is chosen the laptop goes through the process bringing up the Windows XP logo then abruptly shuts down almost like a reboot. Process automatically starts over again and again.
    Options on immediate power up are F2 and F12.
    Does anyone have any advice to offer?
    Thanks in advance for your help ...Andy

    WIll it boot into Safe Mode?  If so right click on the My Computer Icon and select Properties.  Click on the Advanced Tab, then the Setting sbutton by Startup and Recovery.  Now make sure that the Automatically Restart checkbox is NOT checked then OK your way out.  Now when the blue screen appears the system will stop giving you a chance to read it and tell us EXACTLY what it says.  Not something like, EXACTLY WORD FOR WORD.  The lines you will be needing to post will be the ones in this picture http://www.pcstats.com/articleimages/200409/BSOD_2​.gif that state:
    STOP: and a string of NUMBERS (they are zeros not letter O's)
    and the
    Driver_IRQL_NOT_LESS_OR_EQUAL line.
    Also look to see if they list any specific driver, file, or program.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • MacBook will not start up (no display, no chime)

    I have a MacBook (white plastic housing, Intel Core 2 Duo processor) that will not start up. I had replaced an original crashed Toshiba hard drive with a new Seagate drive. That worked well for about 3 months, then suddenly the new HD was causing problems and even reinstalling OS X would not work (installation could not be completed). I sent the Seagate drive back under warranty, and they replaced it with a refurb drive of the same model. (Presumably this means they confirmed that the HD I sent back in was defective.)
    Yesterday I installed the refurb drive, and now the MacBook will not boot up, even to the OS X install DVD in the optical drive. Booting up holding down "C" or option does not help. When I press the power button, there is no chime and the display does not come on, but the white power light on the front right of the case is on. The optical drive spins up, and there is a very brief flash on the display, but then nothing happens. After a few minutes, the optical drive spins down, and I power down by holding the power button. I tried booting up without a HD installed, and the same occurs.
    Any suggestions? Thanks in advance.

    It often is useful if you indicate what exact MBP you have and the OS you have installed.
    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • System PI 7.11 will not start because of R3INLPGM error

    Dear experts,
    our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
    On the source node the PI system starts without any problems. If we switch over to the target node,
    the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
    ran under QUSRWRK.
    In the pool files from SAPSTART we found the following errors:
    QPRINT:
    R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
    QPJOBLOG:
    *NONE      Information                 XXXXXXX  SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                         From module . . . . . . . . :   O4TMKLIBIX                                                                               
    From procedure  . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    To module . . . . . . . . . :   O4TMKLIBIX                                                                               
    To procedure  . . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether              
                                         R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority         
    But the authority from all libs and objects are same as on the source machine.
    Any idea?
    Best regards,
    Matthias

    Hello Matthias,
    Please log on as QSECOFR (or a user with SECOFR authority),
    ADDLIBLE SAPXIP71
    and run command
    FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
    Best regards,
    B. Wolf

  • My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Settings (and other Apps) Will Not Start (Metro)

    This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
    http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
    This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
    It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
    Here's the details from the System event log:
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          19-Jun-2014 09:21:53
    Event ID:      10001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          SARSYS9\Michael Sargent
    Computer:      SarSys9
    Description:
    Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
    "15612"
    Happened while starting this command:
    "C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
        <EventRecordID>546613</EventRecordID>
        <Correlation />
        <Execution ProcessID="972" ThreadID="4068" />
        <Channel>System</Channel>
        <Computer>SarSys9</Computer>
        <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
      </System>
      <EventData>
        <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param2">15612</Data>
        <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param4">Unavailable</Data>
        <Data Name="param5">Unavailable</Data>
      </EventData>
    </Event>
    That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
    I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
    Thanks,
        Mike

    Please post questions and problems about using Windows in the Windows forums on
    http://answers.microsoft.com
    The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
    --Rob

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • HP TouchSmart application will not start

    We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
    HP TouchSmart Calendar has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
    Reminder clock elapsed event is successfully fired.
    CheckReminder() is executed successfully.
    ShowReminder() is executed successfully.
    After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
    Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
    I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
    If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
    On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
    Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
    Cheers,
    G

    Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

  • Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

    Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

    Create a new profile as a test to check if your current profile is causing the problems.
    See Basic Troubleshooting: Make a new profile:
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Oracle 10G Non-Network install - OEM will not start when on the LAN.

    Greetings,
    Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
    Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
    In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
    The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
    ===========================================================
    IP_address hostname.domainname hostname
    where:
    IP_address is the non-routable IP address you entered for the loopback adapter.
    hostname is the name of the computer.
    domainname is the name of the domain.
    For example:
    10.10.10.10 mycomputer.mydomain.com mycomputer
    ==========================================================
    In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    192.168.110.250 IBM-6AB1330E158
    ==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
    IP_address hostname.domainname
    - not -
    IP_address hostname.domainname hostname
    Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
    Thanks in Advance for any help,
    ADG13

    I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
    And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
    fwiw,
    ADG13
    C:\Documents and Settings\Administrator>ipconfig/all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : IBM-6AB1330E158
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : ibm.com
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Loopback Adapter
    Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.110.250
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
    Physical Address. . . . . . . . . : 00-11-25-13-96-AF
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.102
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 65.24.7.3
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
    Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
    Ethernet adapter AGN Virtual Network Adapter:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . : AGN Virtual Network Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-01
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 9.49.217.159
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . :
    DHCP Server . . . . . . . . . . . : 9.49.217.159
    DNS Servers . . . . . . . . . . . : 9.0.2.1
    9.0.3.1
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
    Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Maybe you are looking for