Toshiba protege error 0xc000000e9

The last thing we did in our computer was to restart for an update for the antivirus from charter communication.
So when we restart the system it gives us a message--
"Windows failed to start. a recent H/W or S/W change might be the cause. and gives me the following option.
the option
launch startup repair(recommended) -- selected this one..
launch windows normally.
Now it says windows has encounterd a problem communicating with a device connected to your computers.
status : 0xc000000e9
Info: An unexpected I/O error has occured."
press enter to continue ---and says windows is loading files. and then back to the above message..

please provide the full model number of your computer. it is printed on the bottom. do not provide the serial number
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Similar Messages

Vt-d virtualization not working ot Toshiba Protege m780 s7240

On my Toshiba Protege m780 s7240 I configured BIOS to get VT-d working, But actually it is not working.
After installing XEN it reports that VT-d and all related services are not enabled.
So how is that? Is my machine that is broken or all Toshiba Protege m780 s7240 have VT-d not working?
Is there anything that can be done? I tried to open a ticket but found no way to do that.

Toshiba registration error

Hi
I'm trying to register my Tablet which was purchased in Latin america in Toshiba website (http://www.csd.toshiba.com/sup/jsp/taisreg/registrationSerial.jsp). However, after submitting all my purchase details and personal information I get a message error "Got Exception communicating w/GEDB web service" and the process can't be completed.
Could you please help me with this problem, please?
Regards
Solved!
Go to Solution.

Hi Peter, I needed a core i3 laptop urgently for my research and website development suite so I went to one of the Retail shops in Accra Ghana to get a brand new laptop. After removing it from it box and booting it there was a pop up which asked me to register the machine but the feedback I get after submitting is registration error. Since I did not buy the machine with a credit card from Toshiba and only bought it from a retail shop in Accra Ghana, what is the way forward for me to get the brand new machine registered?.
Regards.
Research / Computing Associate
Institute of Development &Technology Management
Ghana

Toshiba L305 - error has occurred in audio output setting

Hello: I have a Toshiba Sat L305-s5919 and I tried to watch a dvd and got this message.
"error has occurred in audio output setting. please check that sound driver is set up properly." The driver is fine and updated. I checked online and saw this in the europe forums
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=162772
but there is no such HD DVD player for my model in the drivers listing.
Can someone advise?
Thanks.

Satellite L305-S5919
but there is no such HD DVD player for my model in the drivers listing.
Try this.
Toshiba DVD Player (32/64bit)
-Jerry

Toshiba NB205 Error message F3-FF00-0006, Please Help!

I need help. My toshiba NB205 is not working. When I turn it on it goes to a black screen that give me two options Launch start up repair or start normally. If I choose the startup normally it brings me back to the the same screen. If I choose Launch start up repair it goes to a black screen and only my cursor is on there. I tried going into safe mode and doing the recovery but nothing works. It always brings me back to this black screen. I even tried pressing Alt-Ctrl-Del and after trying a bunch of other things it brought me to a black screen and then weird codes came up on the screen like "Realtek RTL8101E etc. PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. This product is covered by one or more of the following patents, etc." and it says a bunch of other stuff and it keeps repeating it. I read in other forums that Im supposed to get into the BIO but I need step by step directions on how to do that cause when I went into the start up (by pressing F2) I didnt know what to do. Well, after pressing Launch star up repair and I left it for several minutes at the black screen to see if anything will happen and then after a long time a pop up message came and it said Error: F3-FF00-0006. Failed to get the ID of the specified partition. Press ok to turn off the computer. When I pressed ok, it turned off the computer and when I turned it on again i took me to the black screen with the two options Launch start up repair or start normally. Ahhh it's so frustrating and all my school work is on this laptop. Please if you can help me.. please let me know what to do..thanks. Oh, and I don't know what could have caused this problem. Yesterday the computer kept freezing up and it was really slow and once it even shut down for no reason but I could start it up after. But today it's not working properly.

do you have same model computer? Are all the same things occuring with your computer as the op's? If not, then start your own thread and start from the beginning. If much of the OP's issue(s) are the same as your you can always link to this thread if there is a reason to do so.

Satellite C55-A-1N1 - TOSHIBA Addendum error

Hi,
I have a Toshiba Satellite C55-A-1N1 and am having some problems.
When I try to open the TREXlauncher under C:\Program Files (x86)\TOSHIBA\Addendum it comes up saying that there is an error and that the program has closed.
It creates an error log which says that there is no command line argument.
I am wondering what other peoples experiences have been of this and would appreciate any help anyone can give.
Thanks,
Ash

Hello PauPau,
Thanks for the advice. I have noticed on the start menu a shortcut to the same file location mentioned in my question called "Additional Information" which opens up a PDF entitled "Using Windows 8.1".
There is also similar shortcut called "TOSHIBA User's Manuel" which opens a PDF version of the manual for my specific laptop model.
I have also looked at the list of installed programs on the Control Panel and see one for Addendum and the other for Manuel.
I was thinking of saving the two PDF's to my laptop and deleting the two programs from the laptop.
What do you think?
Thanks,
Ash

HELP PLEASE!!! My toshiba protege R705 goes into blue screen.

My toshiba goes to blue screen, how can I fix that??
Have taken it to 2 different Best Buy stores like 6 times in a lapse of two weeks, and they can't find anything wrong. They haven't, even, gotten to see it going into blue screen!!! This has been so frustrating and upseting.
Thank you for your help!!

Which Portege R705? There is a label on the bottom.
goes to blue screen
Please attach corresponding *.dmp files from the C:\Windows\Minidump folder.
-Jerry

HP notebook G72-B27CL, HD toshiba MK5065GX error sector 512 problem

Tells me to do a back up and then repair or replace. Is this worth taking to a tech or should replace computer it's a 2010 windows 7 with blue ray 4 GB 500GB hard drive

HI prevailer:
Thank you for your query. I will be pleased to help!
I understand that you are getting, Error sector 12 problem, and you would like to backup your files. I am sending you some documentation on backup and repair. Backing Up Your Files (Windows 7) click here. Creating and Using a System Repair Disc (Windows 7) click here. Performing an HP System Recovery (Windows 7) click here. I hope you find this information useful. Please let me know if you require further aid.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Protege M100 won't boot to internal CD, though it's set to in BIOS

Okay I have a Toshiba Protege m100 here I think.
I set the boot priority in the BIOS to like CD-ROM>LAN>FDD>HDD
I reboot, doesn't work. Boots straight to HD and loads the OS.
I also tried pressing escape or whatever to make the boot menu pop up.
I navigate over to the 1 that looks like a single CD disc. I hit enter on it, and it still boots to HD.
The CD rom works. The current OS is Ubuntu. I can go into Ubuntu and look at the windows XP CD...
But it won't let me boot to any cd, it doesn't even look like it tries to search for one. Doesn't make the sound or the clicking noise.
(and for the record, I'm going from Ubuntu to XP for work, not personal preference lol).
Edit: Oh yeah I had to turn the LAN network card off in the bios because the boot priority would skip the cd again anyway, and search the lan for a connection or something... So with it off, yeah, it skips the LAN too now, to boot from HD.
Message was edited by: chriswf

In my opinion in BIOS you should set HDD as first bootable device.
For some reason if you need to use other device as first bootable device you can choose it manually in boot menu when you use F12 at start-up.

Toshiba Portege M500 sound device not Installed

Dear All, I Have a trouble with my toshiba protege M500. After i am turning back to the factory install then the sound did'nt work. I try to install hardware detection software buat all off them said that the 'Sound Hardware not Installed'. What i have to do to solve this problem ? Any body have a tutorial or suggestion for this matter ? I want to see the board but i didn't know how to dissambling this Portege M500. Regards, Tpk99

Hi,
Try to install everest software. You can find it at download.com . Once downloading it will give you a report of what kind of sound device you have and a link to download the latest driver( probably it will be from toshiba web site).
Aviv M
http://www.anetonline.com

Excel 2013 BeforeRightClick Event fails on Windows 8.1 Tablet (it's an Excel 2013 tablet touch screen interface bug)

I have developed customized table context menus in an Excel 2013 workbook on my Laptop. They work just fine on my laptop and my work desktop. But when I try to run them on my tablet PC the Worksheet_BeforeRightClick event in Excel 2013 never fires. Other
worksheet events appear to work okay. I have fully reinstalled Office 2013 Pro and that does not make any difference.
I have read other comments regarding this same problem going back to 2013, but have never seen Microsoft respond to this issue. Nor have I been able to find a resolution. Has anyone else run into this and found a solution?
Additional Discoveries: Testing on my tablet shows that adding one custom CommandBarButton to either the top or the bottom of the default "List Range Popup" context menu causes the Worksheet_BeforeRightClick event to fail. The basic context
menu commands still show up, but the default dropdown button for additional context menu commands disappears. The event is perhaps firing, but any customized code for the context menu is not being handled properly by Excel. This does appear to be a bug and
not a question of coding error. Perhaps someone else with a tablet PC running WIndows 8.1 could test this.
Based on comments
here this bug was introduced in Excel 2013 because others find the problem does not exist when using Excel 2010 on a tablet PC. Note that all the commenters on the linked thread that are experiencing this problem are using tablet PCs.
Update 3-13-15: I stand corrected. The Worksheet_BeforeRightClick does work on Excel 2013 Windows 8.1 tablets. I happen to own an Asus VivoTab Note 8, which comes with a Wacom stylus. If I use the Wacom sylus to right click on an Excel 2013 worksheet cell,
the Worksheet_BeforeRightClick event fires and modified context menu code runs just fine. But the code will not run if one uses their finger to right click a worksheet cell. This explains why this problem only shows up on tablet PCs. So the "bug"
introduced in Excel 2013 is a general user touch screen interface bug and not an Excel events programming bug.
Update 3-21-15: Switched to a Toshiba Protege laptop with touch screen. Same issue with finger touch screen interface on the Toshiba touch screen as with the Asus VivoTab touch screen.
Laptop: Toshiba Protege (with touch screen), Windows 8.1 64bit and MSOffice 2013 Pro 32bit
Tablet: Asus VivoTab Note 8, Windows 8.1 32bit and MSOffice 2013 Pro 32 bit
Desktop: Generic, Windows 7 64bit and MSOffice 2013 Pro 64bit
phillfri

Hello Phil,
Command bars were deprecated and shouldn't be used any longer. Instead, you need to use the Fluent UI (aka Ribbon UI) instead. You can read more about the new UI in the following series of articles in MSDN:
Customizing Context Menus in Office 2010
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
As a workaround you can add a custom control to the context
menu with the getEnabled or getVisible callback which will be invoked before the context menu is shown.

Satellite A500 - Can I install Windows 7 64bit?

I first bought a Satellite A500 with 4Gb RAM just over 3 months ago with Windows 7 64 bit Home Premium installed. At first I had the initial dramas with finding 64 bit drivers etc then it ran OK for a while. After about 2 & a half months I started getting BSODs with error message related to an nvidia .sys file. After a few weeks of this, updating latest drivers etc, and a number of unsuccessful attempts to diagnose the problem, it was occuring every time I used the laptop and to top it off the touchpad finally died as well. The company I purchased from gave me a replacement laptop.
The new system is also a Satellite A500 and although it has a different model number and faster CPU it is otherwise virtually identical to the the one I had previously with 4Gb RAM and the same nvidia graphics card. However for some reason Windows 7 32 bit has been pre-installed. I'm not sure why the company didn't install 64 bit. A call to the tech dept with the question resulted in the answer "better for you", meaning 32 bit is better for me.
My laptop is 64 bit capable. I know that when running the 32 bit version it only utilizes up to 3.2Gb of the installed RAM (my system says that 2.99Gb is useable - assume rest is allocated to graphics?) but I've read a post where the poster said that he/she found running 32 bit Win 7 was actually faster than the 64 bit version, even tho it wasn't utilizing all the RAM.
*Can someone tell me if I am better off running the 32 bit version of Windows 7 rather than the 64 bit version?*
*If I am better off with 64 bit, can I upgrade to 64 bit or do I have to do a complete reinstall?* No installation disks were supplied. Presume setup files are on hidden partition.
Although I haven't had any BSODs with this new laptop, I have had a couple of occurences where the system has frozen temporarily with the messge "Your display driver has stopped working" followed by a recovery. Is this a Toshiba, nvidia or Windows 7 thing? I've read quite a few other posts from people with similar laptops to mine who've had the same Toshiba/nvidia errors but no resolutions. *If there is going to be a problem with this graphics card, am I better off with 32 bit or 64 bit Windows 7?*
Any advice would be muchly appreciated.

Hi chrissy_h,
I have to say that there is no performance difference between 32bit and 64bit. The only important point is that 4GB RAM or more can only be used on 64bit system. As you wrote, 32bit OS can only handle up to 3.2GB but not more.
I think 32bit OS has a better compatibility to older applications so its preinstalled. Furthermore for the most applications 3.2GB RAM is enough and normally you dont need more.
Theoretically you can install Windows 7 64bit but dont forget that there is no upgrade option. You have to make a new and clean installation of the whole system.
Furthermore you need a Windows 7 64bit disk from Microsoft with license key. This can be purchased from every computer shop I think.
Last but not least check the Toshiba website. There you can find all available downloads for your notebook. :)

Can't copy large files to AirPort Disk Using Windows 7

Hi Everyone,
I'm positng because I'm unable to copy large files to an AirPort Disk using Windows 7. I have the following setup.
AirPort Extreme:
- Firmware version: 7.6.1
- Airport disks secured by password
- No guest access allowed
- Airport Disk Preferences:
- Automatically discover airport disks is enabled
- Show Airport Disks in the system tray is enabled
External Drive:
- Western Digital 500 GB MyBook External Drive connected to Airport Extreme thru USB
- FAT32 Formated
Computers:
- 2 Toshiba Proteges, Both with 4GB RAM
- Both have Windows 7 Home Premium with Service Pack 1, 64-bit version
- (Sorry we have no MacBooks at home, just iPhones and iPods!)
Airport Utility:
- Version 5.6.1
Airport Disk Preferences Utility:
- Version 1.5.5.3
A week ago, I was able to copy over large files (videos <4GB in size) to the drive. Now, when I try to copy over these large files to the drive, the copy dialog box hangs. I receive a message stating that Windows is calculating the size, but then it doesn't copy over. Windows then gives me a message that it is unable to copy to the drive. When I test the drive connection by copying a small text file over, it copies over quickly and seamlessly. This problem occurs on both computers.
I am able to do the following with the drive connection:
- Read files
- Change file names
- Copy files from the drive to my computer
- See the contents of drive
I've tried all the combinations of the following with no success:
- Turning off Windows Search
- Downgrading the firmware
- Reconfiguring wireless adapter
- Rebooting computer
- Rebooting wireless router
- Rebooting external drive
The drive seems to be working fine except for when I want to copy <2GB files over to the drive. Does anyone have a solution that seems to work?
Thanks!

I'm happy to report that, after reformatting the drive to HFS+ (aka Mac OS Extended), there are no problems writing/copying large or small files to the AirDisk drive. I'm also happy to report that I am copying to the drive at a rate of roughly 4MB/s.
As I mentioned earlier, the only catch is that I am unable to plug the external drive directly into a Windows computer via the USB port as Windows is unable to read HFS+ formatted drives. (I can, however, plug the drive into a Mac computer as they can read HFS+ formatted drives. The only problem is that I don't own any Macs at this time! LOL!)
You're probably wondering how I formatted the external drive to HFS+ since I don't own any Macs. (Windows only allows you to format drives in exFAT, FAT, NTFS and the like.) That is a good question. Basically, I downloaded an open source formatting tool called, Gparted, which allows you to format any USB drive to any major file format system. Since Gparted is an open source tool, it is a little cumbersome to use. Once you figure out how to use it, it is a cinch to format the drive to HFS+. (Of course, an easier method would be to borrow a friend's mac, plug the drive into their mac, and format it to HFS+ using their mac.)
For a step-by-step guide on how to solve this problem, see the steps below:
1) Backup all data from external drive
    a) Fortunately, I have a 1TB ultraportable USB drive which has enough space to backup all data on the drive
2) Format the external drive to HFS+ using one of the methods below
    a) Plug it into a Mac and format it
     b) Use Gparted (free) to format it
3) Plug the drive back into the Airport Extreme
4) Start copying files over to your networked drive!
I hope this helps you! Cheers!

Tablet pc

Hi all.
Probably this is not the right place to make a question like this but I try it anyway...
I'm writing a program running on Win XP tablet PC edition ,
this program,obviously, is written in Java .
It work fine but there's a problem, I need to start the input panel of the tablet pc from command line or in same other way when my program start.
Do you know How can I do this ?
Thanks in advance
bye
_drag

Hi,
I was wondering if you found a solution to your query.I have a similar question:
I have developed a Swing Application in Java(J2SDK 1.4.2) for a Client which currently runs on Windows XP on the Laptop.The application uses the following
1)Menus
2)Panels
3)Dialogs
It consists of a an entry form which is saved as an XML file on the user's computer.Also it uses an Access Database.
The other thing that the application uses is a Singature Capture Device to capture a user's signature
I would like to move this application to the Tablet PC.
I have the following questions
1) What SDK do I use for the Tablet PC ?.Also what version of Java web start and Run time ?
2) What kind of changes do I need to make in my application ?
3) Can I make use of the "Ink" feature which is provided with a Tablet PC in Java ?
4)Where can I find user samples if any for Java Tablet PC development ?
BTW I am using Toshiba Protege 3500 for my project.
Thanks,
Raja

POOR QUALITY SPEAKERS

Have you noticed that the speakers installed by Apple in each MBP has poor quality in terms of crisp sound output? and even if you adjust the volume, you only get as much that you need to have your ears closer to your unit for you to hear clearly and appreciate the sound or music that you listen to?
Compare it to the Harmann & Kardon of Toshiba Protege or listen to the sound of the speakers of other laptop brands. The price we pay for an MBPro unit does not come up to standards of competition. They have better speakers that produce quality for our listening pleasure.

Try installing WOW.
http://www.srslabs.com/
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'
Note: I receive no compensation for product endorsements.

Toshiba protege error 0xc000000e9

Similar Messages

Maybe you are looking for