Total Number of ASNs

Hello all,
How can i find the total number of ASNs processed by Supplier and the Total number of Received.?
I know that we can find ASN from LIKP, but i dont understand how to distinguish between total number of ASNs processed and Total number of Received.
I want to calculate the percentage of the both.
any tcode or table will be helpfull
Thanks n Regards

Dog Pa,  That information is in the status bar.  If the status bar is hidden, enable it by clicking CTRL+/.
Then it will look as it did in previous versions of iTunes.

Similar Messages

  • How to get the total number of occurrences based on the value of a column.

    Hello everyone,
    This is the first time that I will ask question here on your forum but has been following several threads ever since. I guess that now is my turn to ask a question. So anyway here is the thing, I have a query that should return count the number of rows depending on the value of SLOT. Something like this:
    WIPDATAVALUE          SLOT             N            M
    1-2                   TRALTEST43S1     1            3
    1-2                   TRALTEST43S1     2            3
    3                     TRALTEST43S1     3            3
    4-6                   TRALTEST43S2     1            4
    4-6                   TRALTEST43S2     2            4
    4-6                   TRALTEST43S2     3            4
    7                     TRALTEST43S2     4            4-----
    As you can see above, on the SLOT TRALTEST43S1, there are three occurrences so M (Total number of occurrences) should be three and that column N should count it. Same goes with the SLOT TRALTEST43S2. This is the query that I have so far:
    SELECT DISTINCT
    WIPDATAVALUE, SLOT
    , LEVEL AS n
    , m
    FROM
      SELECT
        WIPDATAVALUE
        , SLOT
        , (dulo - una) + 1 AS m
      FROM
        SELECT
          WIPDATAVALUE
          , SLOT
          , CASE WHEN INSTR(wipdatavalue, '-') = 0 THEN wipdatavalue ELSE SUBSTR(wipdatavalue, 1, INSTR(wipdatavalue, '-')-1) END AS una
          , CASE WHEN INSTR(wipdatavalue, '-') = 0 THEN wipdatavalue ELSE SUBSTR(wipdatavalue, INSTR(wipdatavalue, '-') + 1) END AS dulo
        FROM trprinting
        WHERE (containername = :lotID OR SLOT= :lotID) AND WIPDATAVALUE LIKE :wip
    ) CONNECT BY LEVEL <= m
    ORDER BY wipdatavalue;And that it results to something like this:
    WIPDATAVALUE          SLOT             N            M
    1-2                   TRALTEST43S1     1            2
    1-2                   TRALTEST43S1     2            2
    3                     TRALTEST43S1     1            1
    4-6                   TRALTEST43S2     1            3
    4-6                   TRALTEST43S2     2            3
    4-6                   TRALTEST43S2     3            3
    7                     TRALTEST43S2     1            1-----
    I think that my current query is basing its M and N results on WIPDATAVALUE and not the SLOT that is why I get the wrong output. I have also tried to use the WITH Statement and it works well but unfortunately, our system cant accept subquery factoring.
    I know you guys will be helping out because you are all awesome. Thanks everyone
    Edited by: 1001275 on Apr 19, 2013 8:07 PM
    Edited by: 1001275 on Apr 19, 2013 8:18 PM

    Hi,
    Sorry, it's still not clear what you want.
    Are you saying that, given this table:
    CREATE TABLE trprinting
      WIPDATAVALUE       VARCHAR2(255)
    , SLOT               VARCHAR2(255)
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('1-2',  'TRALTEST43S1');
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('3',    'TRALTEST43S1');
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('4-6',  'TRALTEST43S2');
    INSERT INTO trprinting (wipdatavalue, slot) VALUES ('7',    'TRALTEST43S2');you want to produce this output:
    WIPDATAVALUE SLOT                     N          M
    1-2          TRALTEST43S1             1          3
    1-2          TRALTEST43S1             2          3
    3            TRALTEST43S1             3          3
    4-6          TRALTEST43S2             1          4
    4-6          TRALTEST43S2             2          4
    4-6          TRALTEST43S2             3          4
    7            TRALTEST43S2             4          4? If so, here's one way:
    WITH     got_numbers     AS
         SELECT     wipdatavalue
         ,     slot
         ,     TO_NUMBER ( SUBSTR ( wipdatavalue
                               , 1
                           , INSTR ( wipdatavalue || '-'
                                ) - 1
                     )          AS low_number
         ,     TO_NUMBER ( SUBSTR ( wipdatavalue
                               , 1 + INSTR ( wipdatavalue
                     )          AS high_number
         FROM     trprinting
    SELECT       wipdatavalue
    ,       slot
    ,       ROW_NUMBER () OVER ( PARTITION BY  slot
                                 ORDER BY          low_number
                        )                    AS n
    ,       COUNT (*)     OVER ( PARTITION BY  slot )     AS m
    FROM       got_numbers
    CONNECT BY     LEVEL               <= high_number + 1 - low_number
         AND     low_number          = PRIOR low_number
         AND     PRIOR SYS_GUID ()      IS NOT NULL
    ORDER BY  low_number
    ,            n
    ;Much of the complexity here is caused by storing 2 numbers in 1 VARCHAR2 column, wipdatavalue. Relational databases work best when there is no more than 1 item in any given column of any given row. This is so basic to datbase design that it is called First Normal Form. Also, numbers belong in NUMBER columns, not VARCHAR2. If you stored your data like that in the fist place, then you wouldn't need the sub-query I called got_numbers, which is about 60% of the code above. (That could be reduced by replacing SUSTR and INSTR with the less efficient REGEGP_SUBSTR.)

  • Hw to find total number of records

    Hi All,
    Can anyone help from these
    1. how to find total number of reports for a particular cube/ods... need step - step solution
    2. how to find total number of records for a particular Cube and ODS and Aggr's to till date.
    3.what is sandbox,mirror sys,instance of a sys..?
    4.what r TWS(Tivoli Workload Scheduler) jobs? how these r different to standard schedulers?
    Thanks in ADv
    Linda

    Hello Linda,
    As you have lots of answers on first 2 so i'll start from 3rd onward.
    3. Sandbox is mostly practice system where you can do all kind of R&D, mirror sys can be mirror image of any system depends on the organization and instance of system is again mirror image of one system.
    4. TWS is third party tool for scheduling which doesn't come along with SAP like standard scheduler as TWS has been prepared specially for this purpose so it has some more features than standard.
    Hope it helps.
    San.

  • Old   How to find total number of events in an event list?

    Hi,
    I am developing a j2me application. i Want to find the total number of events in an event list.(ie, If it contains 15 events then it should return length as 15).
    Not the length of EVENT LISTS i want to find the Length of EVENTS.
    Thanks,
    kumar

    Hi,
    you can find the number of columns and their order using
    the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = sy-repid
       I_INTERNAL_TABNAME           = 'ITAB'
       I_INCLNAME                   = sy-repid
      changing
        ct_fieldcat                  = IT_FIELDCAT
    EXCEPTIONS
       INCONSISTENT_INTERFACE       = 1
       PROGRAM_ERROR                = 2
       OTHERS                       = 3
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif
    now describe your fieldcat . and find no of columns.
    and their order also..
    regards
    vijay

  • Need to Find Total number of InfoPart form in our Web application

    Hello,
    We have to find total number of Infopath forms in our web application. IS there any Power sheell Scripts or anuthing which can output the Infopath Forms location and file count .
    Thanks
    Kundan

    How about something like:
    Get-SPWebApplication http://yourWebAppUrl |
    Get-SPSite -Limit All |
    Get-SPWeb -Limit All |
    Select -ExpandProperty Lists |
    Where { $_.GetType().Name -eq "SPDocumentLibrary" -AND -NOT $_.Hidden } |
    Select -ExpandProperty Items |
    Where { $_.Name -LIKE "*.xsn" }
    Select {$_.Web.Url}, Url
    The above will list all of the files. Do you need counts by library, by site or other?
    Mike Smith TechTrainingNotes.blogspot.com

  • How to find total number of records in a BDoc?

    Dear all,
    I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
    Please help and points will be rewards!!
    Thank You
    Best Regards,
    CK

    I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
    Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
    SQL> create table emp_crap as select * from emp where 1 = 2;
    Table created.
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
      6     loop
      7        if v_cnt = 0 then
      8           v_cnt := rec.rn;
      9        end if;
    10     end loop;
    11     if v_cnt = 0 then
    12        raise zero_rows;
    13     end if;
    14   exception
    15    when zero_rows then
    16      dbms_output.put_line('No rows');
    17   end;
    18  /
    No rows
    PL/SQL procedure successfully completed.
    -- Now, let us use the table, which has the data
    SQL> declare
      2   v_cnt     number := 0;
      3   zero_rows         exception;
      4  begin
      5    for rec in (select * from
      6          (select rownum rn, e.ename from emp e)
      7          order by 1 desc)
      8     loop
      9        if v_cnt = 0 then
    10           v_cnt := rec.rn;
    11           dbms_output.put_line(v_cnt);
    12        end if;
    13     end loop;
    14     if v_cnt = 0 then
    15        raise zero_rows;
    16     end if;
    17   exception
    18    when zero_rows then
    19      dbms_output.put_line('No rows');
    20   end;
    21  /
    14
    PL/SQL procedure successfully completed.Thx,
    Sri

  • To find total number of files inside folder

    Hai,
       In knowledge management is there any option to find total number of files inside folder...
        I also want to see the recently uploaded and modified documents in a seperate iview...
        Iam using NW2004s SP8..
        Very urgent..
        Waiting for a positive reply..
        Thanks&regards,
         Kiruthika.S

    Hi Kiruthika,
    1. You only need the configarchive if you don't want create all the KM configuration objects mentioned in the guide manually. So, just create the objects mentioned there and you don't need the configarchive
    Also, the scenario works also on 2004s.
    2. Please check this thread on how to show the total number of files inside a folder:
    https://forums.sdn.sap.com/thread.jspa?threadID=19610
    3. It would be nice if you would consider rewarding the time people like Saravanan spend to investigate and answer your question by assigning points via the colored stars.
    Best regards,
    Robert

  • To find total number of pages in XML publisher

    1. Is there any method to find the total number of pages in BI or XML publisher.
    2. Is there any method to to repeat the column(Not rows) on every page.For eg you have table with two columns say "A" and "B" .I want to repeat this B in every page . And A should print only in first page.
    3. Is there any method to print a text say "ABC" only on first page footer based on condition.
    Thanks
    Wazid

    Exactly what my requirement is- In my template i have set header and footer page setup as "different first page'" and also printing the user text at the bottom of the last page using <?start@last-page-first:body?> <?end body?>.When i run the template, for multiple pages output user text is displaying at the bottom of the last page that is working fine but for single page output user text is not displaying at the bottom of the page because of the ""different first page'" header and footer.If you have any idea please suggest.

  • FMS to Find total number of Quantity for all Sales Orders

    Hi Experts,
    I am trying to get the total number of quantities for the current document. Kindly help me out how to find it out for the current document.
    Currently I am giving the document no. to the query by modifying the query every time before executing it.  but how can i do this without giving the document numbers and executing the query directly.
    Kindly help ...
    Thanks and regards,
    Amit.

    Hi,
    Please follow below steps to get total quantity.
    1. Run below query first in query generator
    SELECT sum(T1.[Quantity]) FROM ORDR T0  INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE t0.docnum = $[ORDR.docnum]
    2. After execute, save it under query manager with required name
    3. Open sales order and run saved query
    4. Total quantity will be displayed in query result.
    refer below screen shot:
    Thanks & Regards,
    Nagarajan

  • How can I view the total number of songs in my iTunes?

    iTunes no longer displays to the total number of songs. Also the side scroll bar has disappeared. Can anyone help?
    Thanks
    Marcia

    You can restore much of the look & feel of the previous version with these shortcuts:
    ALT to temporarily display the menu bar
    CTRL+B to show or hide the menu bar
    CTRL+S to show or hide the sidebar
    CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
    tt2

  • How can I see the total number of books (size of library) on iBooks on my iMac and IPad Mini?

    I have installed iBooks on both my iMac (main library) as well as on my iPad Mini Retina. I can't seem to find where to see the total number of books in each library? Can anyone enlighten me please? I can see the covers, lists etc. but nowhere how many books I have total in each library (Total: X number of books stored) or something like that. Can someone point me where this information is viewable?

    Did you have 'find my iPhone' activated on it? Because if you go to iCloud.com you can log in there and you can remotely lock or wipe your device.  From what I hear, the police won't do anything about going and fetching stolen iPads and iPhones, but if you have find my iphone/ipad/ipod/mac turned on then it will give you a map of where it is. 
    Just keep in mind that sometimes iTunes does ask you for your password regardless, and only a few weeks ago apple brought in security questions, so everyone had to fill in security questions for their iTunes account to make it more secure If all else fails, ring Apple cusomer support and they might be able to bar your account or something, however you may have to make a new account (the might be able to set it up so you have all your previous information on a new account)
    Hope this helps!

  • How can I get a report with total number of pages printed on my HP Officejet Pro 8610?

    Since knowing the number of pages I print is so critical to a choice of using the "HP Instant Ink Plan" or not, how can I find the total number of pages I have printed on my brand-new (installed 2 days ago) 8610?  And if I can, is it a "resettable" or rolling total?  Don't see anything in user guide and a search yields nothing usable on this blog.
    Printer is installed wirelessly on an older PC with Windows XP SP3.  I can also of course intstall it with network cable but so far it works OK on my home network without network cable.  If it matters which OS, I also have a Lenovo laptop running Vista on which I can install this printer. 
    Please do not respond that I can find the total by counting the number of pieces of paper I have.  Surely the internals of this fine machine must have the requested data so that HP can tell my usage if I select the monthly ink plan!
    This 8610 was a good buy (net $89.00 after trade-in of my six year old J36xx Deskjet) at Office Depot/Max which of course influenced my decision to buy it.  So far I am very happy with printing qualities and speed, have not tried the scanner yet and will probably never use the fax since I have no land line phone. 
    Thanks,
    Harry
    This question was solved.
    View Solution.

    Hi,
    Section #2 of the Printer Ststus report will tell you. Please try:
    Printer status report
    Use the printer status report to view current printer information and ink cartridge status. Also use the printer status report to help you troubleshoot problems with the printer.
    The printer status report also contains a log of recent events.
    If you need to call HP, it is often useful to print the printer status report before calling.
    To print the Printer Status Report
    1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup.
    2. Touch Print Reports and then touch Printer Status Report.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do i find the total number of fields within all tables in one of my databases

    I'm in the process of creating some "gee whiz" metrics for one of my applications and want to find the total number of columns contained in its database.  Is there a stored procedure to get this information that would save me the effort
    of opening each of my 66 tables and counting the columns?  I also have the same question for my 138 views.  Thank you for any ideas you care to offer...............Phil Hoop
    Phil Hoop

    Hi Phil,
    Assumes SQL 2005 or higher
    Let 's try simple one ....
    SELECT COUNT(col.column_name), col.table_name
    FROM information_schema.columns col
    JOIN information_schema.tables tbl
    ON tbl.table_name = col.table_name
    AND tbl.table_schema = col.table_schema
    AND tbl.table_catalog = col.table_catalog
    AND tbl.table_type = 'VIEW'
    GROUP BY col.table_name
    Let me know if this will help you.
    If you think my suggestion is useful, please rate it as helpful.
    If it has helped you to resolve the problem, please Mark it as Answer.
    Varinder Sandhu www.varindersandhu.in

  • How do I find total number of songs in my library in the new iTunes 11?

    Last version of iTunes showed the total number of songs within the library on the bottom of the screen.  Now that's disappeared and I don't know where to find that piece of info.
    Any suggestions?

    Click View>Show Sidebar
    It looks about like the old version.
    Or you can simply click your ipod name at the top of your screen and sync as always.
    The new version is not that different from the old one

  • How to get total number of nodes in a JTree?

    Hi,
    I am trying to get total number of nodes in a JTree, and cannot find a way to do it.
    The current getRowCount() method returns the number of rows that are currently being displayed.
    Is there a way to do this or I am missing something?
    thanks,

    How many nodes does this tree have?
    import java.awt.EventQueue;
    import javax.swing.*;
    import javax.swing.event.TreeModelListener;
    import javax.swing.tree.*;
    public class BigTree {
        public static void main(String[] args) {
            EventQueue.invokeLater(new Runnable() {
                public void run() {
                    TreeModel model = new TreeModel() {
                        private String node = "Node!";
                        @Override
                        public void valueForPathChanged(TreePath path,
                                Object newValue) {
                            // not mutable
                        @Override
                        public void removeTreeModelListener(TreeModelListener l) {
                            // not mutable
                        @Override
                        public boolean isLeaf(Object node) {
                            return false;
                        @Override
                        public Object getRoot() {
                            return node;
                        @Override
                        public int getIndexOfChild(Object parent, Object child) {
                            return child == node ? 0 : -1;
                        @Override
                        public int getChildCount(Object parent) {
                            return 1;
                        @Override
                        public Object getChild(Object parent, int index) {
                            return node;
                        @Override
                        public void addTreeModelListener(TreeModelListener l) {
                            // not mutable
                    JFrame frame = new JFrame("Test");
                    frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
                    frame.getContentPane().add(new JScrollPane(new JTree(model)));
                    frame.pack();
                    frame.setLocationRelativeTo(null);
                    frame.setVisible(true);
    }But for bounded tree model using DefaultMutableTreeNode look at bread/depth/preorder enumeration methods to walk the entire tree. Or look at the source code for those and adapt them to work with the TreeModel interface.

Maybe you are looking for