Touchpad Scroll-buttons not working properly

Hello all,
I was not sure if this is actually a Desktop Environment or Hardware problem, but since it's hardware related I will post it here.
The problem:
On my touchpad (on Acer Aspire 5610Z) I have scroll button for up/down/left/right and until a recent update the scroll buttons need to be clicked repeatably in order to scroll. Before the upgrade and the way I'm expecting to behave is that when I click and hold a button - it should repeat the scroll (I hope you are able to understand it). So basically my problem is that to scroll with the scroll-buttons I have to click it numerous times in order to scroll, instead of just holding the button pressed.
At the same time all other features like two-finger scrolling, gestures etc. are working, but I'm not used to scroll with two fingers and would like to have my scroll-buttons working.
Here is some information about the configuration:
10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
Option "SHMConfig" "on"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "on" # enable vertical scroll zone
Option "HorizEdgeScroll" "on" # enable horizontal scroll zone
Option "VertTwoFingerScroll" "on" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "on" # horizontal scroll anywhere with two fingers
EndSection
Output of synclient -l
Parameter settings:
LeftEdge = 1752
RightEdge = 5192
TopEdge = 1620
BottomEdge = 4236
FingerLow = 25
FingerHigh = 30
FingerPress = 256
MaxTapTime = 180
MaxTapMove = 221
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
FastTaps = 0
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 100
HorizScrollDelta = 100
VertEdgeScroll = 1
HorizEdgeScroll = 1
CornerCoasting = 1
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 1
MinSpeed = 1.6
MaxSpeed = 1.75
AccelFactor = 0.087
TrackstickSpeed = 40
EdgeMotionMinZ = 30
EdgeMotionMaxZ = 160
EdgeMotionMinSpeed = 1
EdgeMotionMaxSpeed = 401
EdgeMotionUseAlways = 0
UpDownScrolling = 1
LeftRightScrolling = 1
UpDownScrollRepeat = 1
LeftRightScrollRepeat = 1
ScrollButtonRepeat = 100
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 2
TapButton3 = 3
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.100007
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 25
VertHysteresis = 25
ClickPad = 0
Output of xinput list :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB2.0 Camera id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
And the last upgrade since the scroll buttons stopped working:
[2012-03-14 08:15] upgraded chromium (17.0.963.78-1 -> 17.0.963.79-1)
[2012-03-14 08:15] > Updating desktop mime database...
[2012-03-14 08:15] upgraded eric (5.1.8-1 -> 5.2.0-1)
[2012-03-14 08:15] upgraded freetype2 (2.4.8-1 -> 2.4.9-1)
[2012-03-14 08:15] upgraded git (1.7.9.3-1 -> 1.7.9.4-1)
[2012-03-14 08:15] upgraded glproto (1.4.14-1 -> 1.4.15-1)
[2012-03-14 08:15] upgraded grep (2.11-1 -> 2.11-2)
[2012-03-14 08:15] upgraded gstreamer0.10 (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-base (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-base-plugins (0.10.35-1 -> 0.10.36-1)
[2012-03-14 08:15] upgraded gstreamer0.10-good (0.10.30-2 -> 0.10.31-1)
[2012-03-14 08:15] upgraded gstreamer0.10-good-plugins (0.10.30-2 -> 0.10.31-1)
[2012-03-14 08:15] upgraded xcb-proto (1.6-2 -> 1.7-2)
[2012-03-14 08:15] upgraded libxcb (1.7-2 -> 1.8.1-1)
[2012-03-14 08:15] upgraded libx11 (1.4.4-1 -> 1.4.99.1-1)
[2012-03-14 08:15] upgraded libxt (1.1.2-1 -> 1.1.2-2)
[2012-03-14 08:15] upgraded imagemagick (6.7.5.3-1 -> 6.7.6.0-1)
[2012-03-14 08:15] upgraded inputproto (2.0.2-1 -> 2.2-1)
[2012-03-14 08:15] upgraded libglapi (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:15] upgraded libgl (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:15] upgraded intel-dri (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded kdebase-runtime (4.8.1-1 -> 4.8.1-2)
[2012-03-14 08:16] upgraded khrplatform-devel (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded libegl (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded libgles (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] Users no longer need to be in the 'camera' group to use camera devices
[2012-03-14 08:16] upgraded libgphoto2 (2.4.11-1 -> 2.4.13-1)
[2012-03-14 08:16] upgraded libnids (1.24-1 -> 1.24-2)
[2012-03-14 08:16] upgraded libpciaccess (0.12.1-1 -> 0.13-1)
[2012-03-14 08:16] upgraded libtiff (4.0.0-1 -> 4.0.1-1)
[2012-03-14 08:16] upgraded libxft (2.3.0-1 -> 2.3.0-2)
[2012-03-14 08:16] upgraded libxi (1.4.5-1 -> 1.6.0-1)
[2012-03-14 08:16] upgraded man-pages (3.36-1 -> 3.37-1)
[2012-03-14 08:16] upgraded mesa (7.11.2-1 -> 8.0.1-2)
[2012-03-14 08:16] upgraded mpfr (3.1.0.p3-1 -> 3.1.0.p7-1)
[2012-03-14 08:16] upgraded oxygen-gtk2 (1.2.1-1 -> 1.2.2-1)
[2012-03-14 08:16] upgraded oxygen-gtk3 (1.0.1-1 -> 1.0.2-1)
[2012-03-14 08:16] upgraded poppler (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded poppler-glib (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded poppler-qt (0.18.3-2 -> 0.18.4-1)
[2012-03-14 08:16] upgraded python-configobj (4.7.2-3 -> 4.7.2-4)
[2012-03-14 08:16] upgraded python-pygments (1.4-5 -> 1.5-1)
[2012-03-14 08:16] upgraded python2-pygments (1.4-5 -> 1.5-1)
[2012-03-14 08:16] upgraded ruby (1.9.3_p125-1 -> 1.9.3_p125-2)
[2012-03-14 08:16] upgraded skype (2.2.0.35-2 -> 2.2.0.35-3)
[2012-03-14 08:16] upgraded xf86-input-evdev (2.6.0-4 -> 2.7.0-1)
[2012-03-14 08:16] upgraded xf86-input-synaptics (1.5.0-1 -> 1.5.99-0.2)
[2012-03-14 08:16] upgraded xf86-input-vmmouse (12.7.0-3 -> 12.8.0-1)
[2012-03-14 08:16] upgraded xf86-video-intel (2.17.0-2 -> 2.18.0-1)
[2012-03-14 08:16] upgraded xf86-video-vmware (11.1.0-1 -> 12.0.0-1)
[2012-03-14 08:16] upgraded xorg-server-common (1.11.4-1 -> 1.12.0-1)
[2012-03-14 08:16] upgraded xorg-server (1.11.4-1 -> 1.12.0-1)
[2012-03-14 08:16] upgraded xorg-xinput (1.5.3-2 -> 1.5.99.1-1)
[2012-03-14 10:51] Running 'pacman -S gimp-devel'
[2012-03-14 10:52] Running 'pacman -S extra/gimp-devel'
[2012-03-14 10:52] Running 'pacman -Syy'
[2012-03-14 10:52] synchronizing package lists
[2012-03-14 10:54] Running 'pacman -S extra/gimp-devel'
[2012-03-14 10:55] Updating font cache... done.
[2012-03-14 10:55] installed gsfonts (1.0.7pre44-3)
[2012-03-14 10:55] installed libwmf (0.2.8.4-9)
[2012-03-14 10:55] installed babl (0.1.6-1)
[2012-03-14 10:55] installed gegl (0.1.8-2)
[2012-03-14 10:55] installed gimp-devel (2.7.5-1)
[2012-03-14 11:01] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.26J/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
[2012-03-14 11:02] installed gimp-photoshop-brush (1.0-1)
[2012-03-14 11:02] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.Jc0/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
[2012-03-14 11:02] upgraded gimp-photoshop-brush (1.0-1 -> 1.0-1)
[2012-03-14 11:03] Running 'pacman -S --asdeps --needed extra/perl-xml-parser extra/intltool'
[2012-03-14 11:03] installed perl-xml-parser (2.41-2)
[2012-03-14 11:03] installed intltool (0.50.1-1)
[2012-03-14 11:03] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.GVM/gimp-plugin-saveforweb-0.29.3-1-i686.pkg.tar.xz'
[2012-03-14 11:03] installed gimp-plugin-saveforweb (0.29.3-1)
[2012-03-14 11:04] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.OX1/gimpfx-foundry-2.6_1-2-i686.pkg.tar.xz'
[2012-03-14 11:04] installed gimpfx-foundry (2.6_1-2)
[2012-03-14 20:27] Running 'pacman -Syy'
[2012-03-14 20:27] synchronizing package lists
[2012-03-14 20:30] Running 'pacman -Syu'
[2012-03-14 20:30] synchronizing package lists
I thank you in advance for your suggestions

I'm afraid the problem is in driver.
I compared sources of input-synaptics 1.6.3 and 1.7.0 and it seems that author has cut off the functionality of "repeating" scrollbuttons
Here's the announce of this new version:
http://lists.freedesktop.org/archives/x … 55593.html
And we can read there: "Purge scrollbuttons (repeat)".
Strange decision I think...

Similar Messages

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

My laptop touchpad scrolling is not working

Hi,
i am pritam,I am using hp15d017tu laptop,which came with free dos .I installed it to windows 8 pro but now the touchpad scrolling is not working.
these have not fixed my scroll at all.No other gesture are working either.The only I can do is point and click on by touchpad.
So,please help me.

Hi can u help me out with the serial and product number of the unit please

I got new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

Igot new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

Hello, krishna kumar.j.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing and issue with your Home button. Here are the troubleshooting steps when experiencing this.
Get help with buttons and switches on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT203017
Cheers,
Jason H.

Button not working properly.

Hi I bought my new HP Envy k112tx its capslock button is not working properly when pressed softly. It has to be pressed hard so that it could work, Its minor.What should i do?.

if it's not bugging you then you can safely just leave it, there is a small risk of causing damage to the keyboard though. If you contact HP they may be able to replace the keyboard for you unless it's less than 30 days old then you should be able to return it for a replacement unit, you'll still need to contact HP first though cause that's where the retailer will refer you to straight away
*****I do not work for HP*****
*****click the purple thumbs up button to say thanks*****
*****If I solved your problem, help others by clicking accept as solution*****

Export Button not working properly in custom OAF page.

Hi,
I have a custom page with a table region is there. There is an export button which exports the rows in an excel sheet.
But it is not working properly, as all the rows are not getting extracted.
Properties set for the export button::
Export all rows :: False
Any sugestion is highly appreciated.
Regards,
Arindam.

Hi Arindam,
Refer below links.
Mukul's Oracle Technology Blog: Implementing Export Button Functionality Programatically
http://dilipoaf.blogspot.in/2013/02/export-selected-rows-data-functionality.html
Thanks,
Dilip

Why is my sleep/turn off button not working properly?

I've had my iphone 5 for about 7 months and it's been having all sorts of problems, like the sleep/turn off button is not working like it did when i first got the phone! I have to press the button harder and on the left side for it to work. Is there anything I can do? Does anyone know the cause of it?

my iphone 4 sleep\wake button doesnot working properly
i have to press it 2 times..in first attempt (sometimes) the screen flickers and go off and i have to press it again to wake it ...
and when it wakes up and i press sleep button it go off and if i press it again it comes with a flicker and works fine
but it does not work properly in first attempt
suggest something and in my country there is no official apple repair store and no apple store ..so that i can take it there and they replace it ...

Wifi sudden disconnection and lock button not working properly on my iphone 4s....... It is under warranty

When using wifi on my iphone,sometimes it disconnects automatically...... And my lock button is not working properly.....
What should i do, my iphone is under warranty....

The Sleep/Wake button is a hardware issue and that's covered by the warranty. I would take it to the Apple Store and see what they can do.
Hope that helps

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

G505s Touchpad buttons not working properly while gaming?

This is the second time i am posting this due to no replies:
I recently bought a Lenovo G505s about a month ago. Everything is fine with it until i downloaded Steam and downloaded some games. 3 of the games i downloaded are shooters and therefore require the left mouse button. But when i click it to shoot, it doesn't respond sometimes and is very laggy. This is not the fault of the game as i tried it in different ones but the problem is still there. i tried to switch round the buttons (so that the right button is to shoot and the left to aim) and it works fine. I would prefer to have it the usual way around so does anyone have a way to fix this? did this happen to you?
If it is needed here are some specs for the pc:
AMD A8
6gb ram
WIndows 8.1
also the buttons and trackpad work completely fine with everything else except games including Minecraft. it seems that when i am moving with WASD the button doesn't work but the right click button does.
Can someone please give me a reply?
Solved!
Go to Solution.

hi AdreesInator,
Welcome to Lenovo Community Forums!
There is a feature on Touchpad software and driver to lessen the touchpad Sensitivity when using the keyboard to prevent touchpad movement when typing,
I believe this is the cause.
First try to open Control Panel and look for Hardware and sound then Mouse
Then you will find a TAB at the top right for your touchpad.
Click that and select Settings or properties, This is how it looks.
Click the settings and once inside look for Palm check Option, This is the feature that changes the sensitivity and response accuracy of the touchpad
If you can't find this Palm check inside the touchpad settings, you might need to uninstall the touchpad driver and just use the WIndows Generic driver as the Driver does not support changing it.
If this is the case
Open Control Panel and look under Mice and other pointing device and uninstall your Synaptics or ELAN then go Open COntrol Panel / Add remove Programs / Uninstall a program and uninstall Synaptics or Egis tech ELAN.
Then try your Games with the touchpad and it should work fine
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite L955-10K - Synaptics Touchpad Driver does not work properly

Hello, ASRR here.
I've been having a problem with my Synaptics touchpad driver since yesterday. I am very used to using the "gestures" to work with my touchpad and the gestures haven't worked properly (in fact at all) for a while. The two-finger scrolling, the three-finger touch and others (actually all of the gestures) do not work anymore.
The cursor moves, and works fine but the gestures don't.
When I go to the Mouse option in the Control Panel, a window pops up stating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me whether I want to uninstall it.
I have tried uninstalling it, then going on the support page for Toshiba and downloading a driver that was suitable for my model, operating system, etc.
When I set up the driver I downloaded and restart the PC, the same window pops up when I try and go to the Mouse options in the Control Panel and the gestures do not work.
One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
I have tried multiple times to fix it but I can't. I went to the UEFI firmware set up and tried resetting it to default but with no success.
I really do not know what to do. Could somebody PLEASE help?
My Toshiba Model is a Satellite L-955-10K with a 64bit processor and originally installed Windows 8 operating system.
Any help would be greatly appreciated. Thanks

>One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
To me it looks like the Synaptics touchpad driver could not be installed properly and after the new restart the touchpad driver isnt indicated by the Windows 8 system.
By the way: are you still using the Win 8? Didnt you upgrade the system to Win 8.1? Should do this since many different bugs have been solved in new Win 8.1 version.
Back to the Synaptics touchpad driver.
Usually the drivers should be downloaded from the Toshiba driver page but in some cases you could also use the drivers directly from manufacturer pages. In this case the touchpad driver has been released by Synaptics and it would be interesting to know how the touchpad driver from Synaptics driver page would act on your notebook
http://www.synaptics.com/en/drivers.php

T30 freezing issues and Touchpad & Trackpoint buttons not working.

Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
Message Edited by GoalieFergy53 on 02-14-2009 02:30 PM

My T42p Touchpad and Trackpoint work fine however,
the buttons are not responding properly.
I'm forced to use an optical mouse to properly maneuver when working on
the screen.
When the well is dry, we'll all know the value of water.

Hp DV6 TouchPad Lock Button Not Working Please Help.?

I just bought my hp dv6 6c4se entertainment notebook. but the touchpad on and off button is not working.please help.yes there is a little white sqaure in the left up corner of the touchpad.but it doesnt work.please help somebody

Try a Hard Reset to gently "kick" that TouchPad back into operation.
HP Notebook PCs - Use a Forced Reset to Resolve Hardware and Software Issues on Notebook with a Seal...
Removable Battery:
HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
Kind Regards,
Dragon-Fur

Scroll Bars Not Working Properly with Multiple Displays

Do the following on a laptop that supports having the desktop spread across multiple monitors. Display 1 is the laptop screen, Display 2 is an external monitor.
Open a SQL*Developer window in Display 2.
Open a SQL Worksheet.
Run a query that produces more rows than will fit in the results window, e.g. "select * from user_objects".
Click, hold, and slide the vertical scroll bar handle downward in the results tab.
The rows do not scroll. Garbled characters appear in the last row.
Move the window to Display 1. The scroll bar works properly. Rows scroll up and down and no garbled characters appear.
Note that the horizontal scroll bar produces garbled characters as well.
(SQL*Developer 1.2.1 32.13; Win XP Pro, Oracle XE)

These sort of issues can often be fixed by some combination of
- getting the latest device drive for your graphics card
- using java 6
- specifying -J-Dsun.java2d.ddoffscreen=false as a command line argument for sqldeveloper.
- specifying -J-Dsun.java2d.noddraw=true as a command line argument for sqldeveloper.
You can also add vm options to you sqldeveloper.conf file using the "AddVMOptions -D..." directive

Mouse scroll wheel not working properly in ff5

Since upgrading to FF5 the scroll wheel on my mouse doesn't work properly in Firefox - it's works as normal in everything else, just not in Firefox.
When I try scrolling, the wheel clicks (it clicks when turned) 7 or 8 times before the window in FF will scroll, and even then it only scrolls 2 or 3 lines per click. In all prevous versions of FF it would scroll in the same way as it does in all other programs, ie it would scroll 6 lines per wheel click.
It's clearly an issue with FF5 as it only affects FF5 and is annoying enough to make me start using Internet Explorer, which I haven't done for some years.
Anyone else having this problem?

Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
https://bugzilla.mozilla.org/show_bug.cgi?id=686228
With luck it will be fixed in a future version.

Touchpad Scroll-buttons not working properly

Similar Messages

Maybe you are looking for