TP getting stucked due to error:

Hello friends,
I have a problem on my SAP system:
ERROR: The following call returned with exit code 127:
ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
the tp is always getting stucked.
Any ideas please ?
Moderator message: not directly related to ABAP development, please have a look in the SAP Netweaver Administrator or Software Logistics forums.
Edited by: Thomas Zloch on Aug 22, 2011 2:26 PM

I was facing the same issue,
My problem was because the job was executing in other application server.
I had to schedule the job on the Central Instance and it worked fine.
Regards.

Similar Messages

My ipad3 is at iOs 7, i'm trying to download update 7.0.2 I keep getting failed due to error like 9 times now. My mini, my two iphone 4s, no problems. What can I do about my ipad3?

ipad3 running iOs 7 trying to update to 7.0.2 keep tting failed due to error like 9 times. Updated iPad mini and 2 iPhone 4s, no problem.
Whats up? And what can I do to update?

Try and update with iTune (computer)

Why does the installer keep getting stuck but no error messages appear in the log?

So as of I think recently, I've been having problems installing things. I'm using installer version 2.1.
I found myself having to re-install a driver for my tablet awhile ago, and every time I tried to install it the installer got stuck in the 90%s somewhere. However, no error window popped up and when i went to look at the log, it didn't show any errors.
I again encountered this same installing problem today when I went to install a newer slightly updated version of Java which would work on os x 10.4 and the installer got stuck at 99% again showing no errors.
Help? I have no idea what the problem could be, I believe it's way beyond me.

Hello, took me awhile to find this out, but...
Get the combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reapply the Combo Update.
Repair Permissions afterwords, reboot.

Need to check tls/ssl but getting stuck with "You must provide a value expression on the right-hand side of the '-' operator."

I would like to disable ssl 3 but need to test what sites only support ssl 3. I keep getting stuck with an error that is over my head. I've tried manipulating the string a dozen different ways and keep getting the same error. I am not familiar with -notin
or how to specify which part of the property its checking: thanks a ton
http://blog.whatsupduck.net/2014/10/checking-ssl-and-tls-versions-with-powershell.html
line with issues:
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
You must provide a value expression on the right-hand side of the '-' operator.
At S:\scripts\test23.ps1:50 char:126
+ $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name - <<<< noti
n @("Default","None") | %{$_.Name}
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : ExpectedValueExpression
<#
.DESCRIPTION
Outputs the SSL protocols that the client is able to successfully use to connect to a server.
.NOTES
Copyright 2014 Chris Duck
http://blog.whatsupduck.net
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
.PARAMETER ComputerName
The name of the remote computer to connect to.
.PARAMETER Port
The remote port to connect to. The default is 443.
.EXAMPLE
Test-SslProtocols -ComputerName "www.google.com"
ComputerName : www.google.com
Port : 443
KeyLength : 2048
SignatureAlgorithm : rsa-sha1
Ssl2 : False
Ssl3 : True
Tls : True
Tls11 : True
Tls12 : True
#>
function Test-SslProtocols {
param(
[Parameter(Mandatory=$true,ValueFromPipelineByPropertyName=$true,ValueFromPipeline=$true)]
$ComputerName,
[Parameter(ValueFromPipelineByPropertyName=$true)]
[int]$Port = 443
begin {
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
process {
$ProtocolStatus = [Ordered]@{}
$ProtocolStatus.Add("ComputerName", $ComputerName)
$ProtocolStatus.Add("Port", $Port)
$ProtocolStatus.Add("KeyLength", $null)
$ProtocolStatus.Add("SignatureAlgorithm", $null)
$ProtocolNames | %{
$ProtocolName = $_
$Socket = New-Object System.Net.Sockets.Socket([System.Net.Sockets.SocketType]::Stream, [System.Net.Sockets.ProtocolType]::Tcp)
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $ProtocolName, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$ProtocolStatus["KeyLength"] = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus["SignatureAlgorithm"] = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
$ProtocolStatus.Add($ProtocolName, $true)
} catch {
$ProtocolStatus.Add($ProtocolName, $false)
} finally {
$SslStream.Close()
[PSCustomObject]$ProtocolStatus
Test-SslProtocols -ComputerName "www.google.com"

V2 version:
function Test-SslProtocols {
param(
[Parameter(
Mandatory=$true,
ValueFromPipelineByPropertyName=$true,
ValueFromPipeline=$true
)]$ComputerName,
[Parameter(
ValueFromPipelineByPropertyName=$true
)][int]$Port = 443
begin {
$protocols=[enum]::GetNames([System.Security.Authentication.SslProtocols])|?{$_ -notmatch 'none|default'}
process {
foreach($protocol in $protocols){
$ProtocolStatus = @{
ComputerName=$ComputerName
Port=$Port
KeyLength=$null
SignatureAlgorithm=$null
Protocol=$protocol
Active=$false
$Socket = New-Object System.Net.Sockets.Socket('Internetwork','Stream', 'Tcp')
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $protocol, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$protocolstatus.Active=$true
$ProtocolStatus.KeyLength = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus.SignatureAlgorithm = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
catch {
Write-Host 'Failed'
finally {
New-Object PsObject -Property $ProtocolStatus
$SslStream.Close()
Test-SslProtocols -ComputerName www.google.com
¯\_(ツ)_/¯

C410 printer stuck in a error loop

has anyone else had an issue with a c410 getting stuck in a error loop? It asks me to "please turn printer off and the on" and as soon as I turn it off it comes right back on with this same message on the display. Any help would be greatly appreciated.

Hi,
I found this link about power issues which may help your situation:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01368841&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hope it works.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

Hey corrafromlondon,
Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
How to install OS X Yosemite on your Mac - Apple Support
you can find the Yosemite installer app in your Applications folder or Launchpad.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My apple TV 3 is stuck in recovery. When connected to iTunes through microUSB, it gets stuck in "Preparing Apple TV for restore", then after what seems forever, it gives me an error 2003. What can be done?

I tried to update my Apple TV today through iTunes using a microUSB. It gave me an error, I tried again and now it is stuck in recovery mode. If I plug it into the TV, it just shows that I have to connect it to iTunes (just the picture). I unplug everything, plug the microUSB and USB, plug the power, open iTunes, it shows, asks me to restore, I click Restore. It starts extracting the file, finishes, then gets stuck in "Preparing Apple TV for restore..." for what seems forever, when it finally times out, I get an error number 2003. I have tried different USB ports, no other USB device is connecte, I have tried restarting the PC (running windows 7, up to date, iTunes up to date as well), I have tried redownloading the IPSW and even using the shift+restore and manually selecting the .IPSW file, and to be honest, I give up! If anyone can help, I'd truly appreciate it. Thanks!
PS: I also tried pressing menu+down for 6 seconds to restart, I tried pressing menu+play to restart, I tried pressing menu+down 6 secs and then menu+play 6 seconds for the so called DFU mode, nothing works, the Apple TV just restarts back to the "connect to itunes picture" along with the fast continuous white light flashing.

typed in appletv error 2003 in google
https://discussions.apple.com/thread/2614453?start=0&tstart=0
http://forums.macrumors.com/showthread.php?t=812231
more
https://www.google.dk/search?client=opera&q=appletv+error+2003&sourceid=opera&ie =utf-8&oe=utf-8&channel=suggest

Getting error " Incomplete update due to error in single records"

Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishna

hi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh

I can not take pictures or back up my phone due to error message not enough storage.I have all of my data turned off and still can not back phone up.? I have deleted lot of pics and messages and still get message..

I can not take pictures or even back my phone up due to error message not enough storage I have went into manage storage and turned all my apps to off and I still get error. I also have deleted a ton of pictures and apps.

Hi there mistib,
You may find the information in the article below helpful.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
-Griff W.

Some Journaled Calendar Requests get stuck in Submission queue - 550 5.6.0 - storage error in content conversion

I am having an issue on hub transport servers running Exchange 2010 SP3 RU6.
Where some journaled meeting request related messages (acceptances, etc.) get stuck in the Submission queue.
The error is:
400 4.4.7 The server responded with: 550 5.6.0 M2MCVT.StorageError; storage error in content conversion. The failure was replaced by a retry response because the message was marked for retry if rejected.
I raised the issue with our mail archiving vendor and they indicated this was an Exchange Server problem which should have been fixed in Exchange 2010 SP3 RU3, however we are running SP3 RU6 and the issue continues to occur.
I realize that we could just delete the stuck messages from queue but has anyone run in to this before and know how to prevent it from happening?
Thank You.

Hi Mike,
If you temporary disable\bypass third party Archiving , then what happens in the Queue.
Thanks , Prakash
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com

HT201210 my ipad 1 gets stuck with the apple logo and doesn t work any more. any suggestions how to fix it please? when trying to restore through itunes i keep getting error 1603

I can't restore and make my ipad work. every time i start restoring it it gets stuck and error message (1603) pops on the screen.
Can anyone please help? Let me know what can I do to get it to work again.
Thanks

Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
The above comes from:
http://support.apple.com/kb/TS3694#1600

Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?

Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions

TP getting stucked due to error:

Similar Messages

Maybe you are looking for