Tpc 2206 web server

OK, now I figured I would push the web service out to a touch panel. Unfortunately I can get the touch panel to load the web service. In max, you can right click on the system but the web configuration is disabled/greyed out....
I've loaded 2014 RTE, NI web services runtime, system config runtime, and web based config and montioring (essentially any additional installer that appeared to me "web" related. I didn't get anywhere.
I did dig down into the program files to the shared/ni webser folder and saw the web server files. Windows task manager shows the NiSystemWebServer service as stopped and I cannot restart it.
Is there a driver I'm missing, or does the tpc 2206 not support a web service?

Using the web service configuration in the build dialog, I can get the unsecured web services running, but the ssl fails to run correctly. Unfortunately, all I have to go on is error code 363507 on my pc program which says it cannot verify the authenticity of the server. Sooo, I would like to make sure that ssl is enabled and the port is valid (I've tried 10 other ports without success). Maybe its something with the certificate? Unfortunately the only location I know to create certificates is through the web based configuration which of course will not run.
I can go into windows services and see the ni system webserver is automatic, and it immediately closes once started. The application server is also automatic..... So I'm guessing these only run when my executable is running. I still can't open the web based system config when I'm running my executable.
I have the following on my tpc, and I still cannot open the web-based system configuration on the touch panel.
1. silverlight
2. 2014 lv rte
3. ni lv rte web server
4. max 14.0
5. ni network browser
6. ni system config run time
7. ni we based config and monitoring
Any ideas on how to get the web-based system config working?

Similar Messages

How do I use Sun Web Server 7.0u1 reverse proxy to change public URLs?

Some of our installations use the Sun Web Server 7.0 (update 1, usually)
for hosting some of the public resource and reverse-proxying other parts
of the URI namespace from other backend servers (content, application
and other types of servers).
So far every type of backend server served a unique part of the namespace
and there was no collision of names, and the backend resources were
published in a one-to-one manner. That is, a backend resource like, say,
http://appserver:8080/content/page.html would be published in the internet
as http://www.publicsite.com/content/page.html
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.
Another quest, possibly related in solution, was to make a tidy url for the
first page the user opens of the site. That is, in the current solution when
a visitor types the url "www.publicsite.com" in his or her browser, our web
server returns an HTTP-302 redirect to the actual first page URL, so the
browser sends a second request (and changes the URL in its location bar).
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
So far I found that I can't solve these problems. I believe these problems
share a solution because it relies on ability to control the actual URI strings
requested by Sun Web Server from backend servers.
Some details follow, now:
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
[04/Mar/2009:21:45:34] finest (25095) www.publicsite.com: for host xx.xx.xx.83
trying to GET /content/MainPage.html while trying to GET /test, func_exec reports:
fn="service-passthrough" rewrite-host="true" rewrite-location="true"
servers="http://10.16.2.127:8080" Directive="Service" DaemonPool="2b1348"
returned 0 (REQ_PROCEED)My obj.conf file currently has simple clauses like this:
# this causes /content/* to be taken from another (backend) server
NameTrans fn="assign-name" from="/content" name="content-test" nostat="/content"
# this causes requests to site root to be HTTP-redirected to a certain page URI
<If $uri =~ '^/$'>
    NameTrans fn="redirect"
        url="http://www.publicsite.com/content/MainPage.html"
</If>
<Object name="content-test">
### This maps http://public/content/* to http://10.16.2.127:8080/content/*
### Somehow the desired solution should instead map http://public/data/* to http://10.16.2.127:8080/content/*
    Service fn="service-passthrough" rewrite-host="true" rewrite-location="true" servers="http://10.16.2.127:8080"
    Service fn="set-variable" set-srvhdrs="host=www.publicsite.com:80"
</Object>
I have also tried "restart"ing the request like this:
    NameTrans fn="restart" uri="/data"or desperately trying to set the new request uri like this:
    Service fn="set-variable" uri="/magnoliaPublic/Main.html"Thanks for any ideas (including a statement whether this can be done at all
in some version of Sun Web Server 7.0 or its opensourced siblings) ;)
//Jim

Some of our installations use the Sun Web Server 7.0 (update 1, usually)please plan on installing the latest service pack - 7.0 Update 4. these updates addresses potentially critical bug fixes.
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.> now, if all the resources are under say /data, then how will you know which pages need to be sent to which back end resources. i guess, you probably meant to check for /data/page.html should go to <back-end>/content/page.html
yes, you could do something like
- edit your corresponding obj.conf (<hostname>-obj.conf or obj.conf depending on your configuration)
<Object name=¨default¨>
<If $uri = ¨/page/¨>
#move this nametrans SAF (for map directive - which is for reverse proxy within <if> clause)
NameTrans.. fn=map
</If
</Object>
and you could do https-<hostname>/bin/reconfig (dynamic reconfiguration) to check out if this is what you wanted. also, you might want to move config/server.xml <log-level> to finest and do your configuration . this way, you would get enough information on what is going on within your server logs.
finally,when you are satisfied, you might have to run the following command to make your manual change into admin config repository.
<install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
you might want to check out this for more info on how you could use <if> else condition to handle your requirement.
http://docs.sun.com/app/docs/doc/820-6599/gdaer?a=view
finally, you might want to refer to this doc - which explains on ws7 request processing overview. this should provide you with some pointers as to what these different directives mean
http://docs.sun.com/app/docs/doc/820-6599/gbysz?a=view
>
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
please check out the rewrite / restart SAF. this should help you.
http://docs.sun.com/app/docs/doc/820-6599/gdada?a=view
pl. understand that - like with more web servers - ordering of directives is very important within obj.conf. so, you might want to make sure that you verify the obj.conf directive ordering is what you want it to do..
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
now, you are in the totally wrong direction. web server 7 includes a highly integrated reverse proxy solution compared to 6.1. unlike 6.1, you don´t have to download a separate plugin . however, you will need to manually migrate your 6.1 based reverse proxy settings into 7.0. please check out this blog link on how to set up a reverse proxy
http://blogs.sun.com/amit/entry/setting_up_a_reverse_proxy
feel free to post to us if you need any futher help
you are probably better off - starting fresh
- install ws7u4
- use gui or CLI to create a reverse proxy and map one on one - say content
http://docs.sun.com/app/docs/doc/820-6601/create-reverse-proxy-1?a=view
if you don´t plan on using ws7 integrated web container (ability to process jsp/servlet), then you could disable java support as well. this should reduce your server memory footprint
<install-root>/bin/wadm disable-java user=admin config=<hostname>
<install-root>/bin/wadm create-reverse-proxy user=admin uri-prefix=/content server=<http://your back end server/ config=<hostname> --vs=<hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
now, you can check out the regular express processing and <if> syntax from our docs and try it out within <https-<hostname>/config/<hostname>-obj.conf> file and restart the server. pl. note that once you disable java, ws7 admin server creates <vs>-obj.conf and you need to edit this file and not default obj.conf for your changes to be read by server.
>
I have also tried "restart"ing the request like this:
NameTrans fn="restart" uri="/data"
ordering is very important here... you need to do this some thing like
<Object name=default>
<If not $restarted>
NameTrans fn=restart uri from=/¨ uri=/foo.
</If>

Unable to close open and blocked web server ports

I have been running the sun webserver 6.1 as a test development environment on my local pc (Windows 2000) at work. The machine crashed while the web server was running, and while the server instance stopped, the ports being used are still open and apparently, still being used. Restarting my machine does not solve the problem.
Using netstat (through cygwin - i am familiar with linux, and have been using cygwin as the easiest way to do many things with the web server) I can see that the ports are indeed being "used", however i cannot find any running processes (through the top or ps command or the task list) associated with the open ports. Also attempts to start the server again fail, and the server complains that the ports are currently being used.
In order to continue to develop I created a new domain using a different set of ports. Since then, I have (in zealous cleanup) removed the domain that was using those ports, and in attempting to setup a different webserver encountered the open ports.
I need/wish to stop the running processes and close the open ports. Any ideas?
Thanks in anticipation.

There are no such processes running in either the task manager or services.
I do not believe that the domain/web server is running, since the domain instance has since been removed.
However, the ports seems to be stuck on being "used".

Setting Up a Java Web Server on Linux

Greetings,
After a lot of reading, I've decided to learn Java server-side technologies (I already know Java (desktop)
but with little experience) in order to develop my database driven dynamic website projects.
However, I'm completed lost between the hundreds of acronyms related to Java and the "thousands" of technologies involved.
Google hadn't help me understand what they really are and how they relate with each other.
Even though is easy to find what they stand for and some faqs/descriptions, it hasn't been enought to clear my mind.
I want my webserver application to do, among other things, the following:
Retrieve Data from a database, do generate dynamic html files.
Story Data on the database, from html forms.
Send automaticly emails for multiple users. (newsletter for example)
E-Commerce.
Html graber/parser (I don't know if this is the right word, I mean a program that for example, goes to a URL with an html
table, and stores that information in a database table, as long as the format didn't change).
Real Time Chat feature.
Database connection pooling, caching, and other important optimizations.
I'm not asking for how to develop or configure this features nor what components and programs, must be installed.
At the moment, I only want to know how to set up a Java solution that will support them when they are needed.
*** Linux ***
I want to set up my webserver on a linux distribution.
In that respect, I don't know if I should choose RedHat or Fedora Core.
I've heard that fedora is better for a webserver (having in mind that Red Hat Enterprise AS/ES aren't free).
But I've read in several sun turorials/webpages references to RedHat (on a J2EE context).
So I'm wondering if is better to go for Fedora or RedHat. Are there pros & cons? They equally support Java?
*** Technologies ***
Then in starts the acronyms problem.
What do I need to install, in what order, for what?
Some aconyms and technologies, I have read about but don't fully understand are the following:
Apache
J2EE
J2EE 1.4 SDK
SUN Java System Application Server Platform Edition 8
J2SE 1.4.2 SDK
SUN Java Enterprise System
Tomcat
Struts
Cocoon
JBoss
I already know J2EE is only a specification. What implements that specification? Sun Java System Application Server?
J2SE SDK? or Tomcat?
What is the role of each technology, namely Apache, Tomcat, Sun Application Server?
What is the Sun Java Enterprise System?
How do Struts, Cocoon, JBoss relate to Java?
Which of these technologies are mutually exclusive (analogous)?
*** Doubts ***
Then, I have some doubts that are keeping me from starting to study seriously the important techonologies, because I don't
want to lose lot's of time and effort learning them to after a dillusion start everything again with PHP (the language
which make me think and read a lot before going for Java). To keep this from happening, I would like to know the following:
I want to use Java for developing websites with commercial/profitable use for my company, in some throught e-commerce,
and in other by banners. I want to do everything by the book, with required licenses.
------ Java is Free?
Is Java Completely Free or it might be possible that at a certain point, when I need some component or library,
multi-machine webserver, performance or security for high-traffic I will see "buy now" instead of "download now"?
For what they may "ask for money"? and what are the disavantages if I can't buy?
For example, "Java System Application Server Standard Edition 8.1 2005Q1" and
"Java System Application Server Enterprise Edition 8.1 2005Q1" cost $2.000 and $10.000 respectively. That is money.
(http://www.sun.com/software/products/appsrvr/index.xml). What are the disavantages if stick to the free edition?
Features like (from sun site)
Standard Edition:
Extends the capabilities of the Platform Edition to provide secure, remote, multi-instance, multi-machine management.
It is aimed at high-volume applications and Web services.
Enterprise Edition:
Further extends the capabilities of the Standard Edition to provide continuous availablity for applications and
Web services. It is aimed at business critical, high value applications and Web services.
Suppose I achive lots of traffic and I keep the free platform edition.
I won't be able to have a multi-machine webserver set up correctly?
What are the drawbacks? How big are the performance penalties?
------ Technologies Availability
Finnaly, I have the idea (I don't know if it's accurate) that there are Sun versions and Open-Source Free versions
of doing or supporting the same Java related thing.
Despite the way I choose to set up a Java webserver, I will always have all J2EE techonolies like:
Java API for XML-Based RPC (JAX-RPC), JavaServer Pages, Java Servlets, Enterprise JavaBeans components,
J2EE Connector Architecture, J2EE Management Model, J2EE Deployment API, Java Management Extensions (JMX),
J2EE Authorization Contract for Containers, Java API for XML Registries (JAXR), Java Message Service (JMS),
Java Naming and Directory Interface (JNDI), Java Transaction API (JTA), CORBA, and JDBC data access API.
I really appreciate some help. I could learn the basics of all this "stuff" before asking. But the point why I'm asking
is precisely not starting to learn something I may won't use. Obviously, I will have to make a lot of reading during maybe
months before writing the first line of code of my projects, but being certain that it will fit my needs.
I will be very thankful if you can enlightme in my fedora/redhat, setup, free/cost and technologies avaibility issues.
Thanks Beforehand,
Pedro Vaz

Apache is a free Web-server.
Tomcat is a servlet (and JSP) container. It can be stand-alone or can be used together with a Web server (like Apache).
J2EE's scope is much wider than the servlet stuff, but a standalone Tomcat is a good starting point to servlets and JSP.
One of our "real-world" applications is run by a standalone Tomcat using POI and Velocity. I did not regret this architectural decision.

FLV File does not play when published to my web server

Hi. I have created a short video in VC3 and selected the FLV option to create a web page. When I uploaded the entire file content to my web server (windows 2003 server hosted at Network Solutions) the FLV file will not play. Now... if I do the same with a WMV tile, the video plays.
You can view the file at
http://www.airforcehomeseller.com/videos/va_education/VATutorials/index.htm
We have another video published in WMV format, although the video vs audio sync is out of wack at the moment, at
http://www.airforcehomeseller.com/videos/Energy%20Pricing%20101/index.htm
What am I doing wrong?
Any help would be greatly appreciated.
G-II

Hi again
You should probably double-check to ensure the standard.js file was also copied in when the HTML page was imported. It should be there but it never hurts to double check.
You might also perform a double-check to ensure things ended up in the correct folder (if you are organizing your project into folders). It could be that you moved the HTML page into a different folder and orphaned the JavaScript file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Understanding Application and Web Server Integration

Folks,
I am relatively new to web development and have some fundamental questions. I have read various articles and posts on these forums that describe the difference between an Application server and web server but haven't seen any on the integration of the two.
I have recently downloaded the Sun Java System Application Server, built a simple application with a couple of JSPs, servlets and static html pages and deployed it through a deployment tool that came with the application server.
Now, the application is accessible through my browser, so It seems the application server does everything I need, even for serving static pages. Do i need a web server? If so, would I implement a web server for design reasons and host static pages on that? Any hints on how to do this?
Your help is appreciated.
-joe

No you don not. However, if you had a large site, which experienced thousands of hits a minute, you wouldn't want to burden your application server with the overhead of serving static content. Otherwise, go for it.
As far as integrating an application server with a web server, I only have access integrating Tomcat with various web servers and it's not difficult at all. There's another post here (today as a matter of fact) where I give details for Tomcat and IIS.

I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
Thanks
Eric

Eric,
these applications are applogics which are not controlled by the
iasdeploy tool. Unfortunately, there is no tool available to remove
these applications for you. What you can do is to manually remove all
their entries, but be careful if you do that. If you remove the wrong
keys you might break your ias installation, so be warned and make sure
you backup the whole ias registry before attempting to remove anything.
Eric Coleman wrote:
>
I want to remove the COnlineBank, OnlineBank and csample applications
from my application and web server.
How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
and "iasdeploy removemodule" with no luck. I want to clear all of
this demo stuff out to make both the web and app server look more
production like.
Thanks
Eric
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

Can anyone help me know the difference b/w application and web server?

i tried reading about application and web servers. it appears to me to be the same. please do help me to differentiate. Thanks :-)

An application server hosts business logic components for an application. A web server is an application which accepts HTTP requests.
An application server may come packaged with a web server.
A web server is a very simple process. It's HTTP daemon process that listens for incoming requests over HTTP protocol on a specified port usually, 80. For simple, static web pages the web server has the built in logic to serve them but for a complex operation(say read from database and display some records), it routes the URL to a component like the servlet engine....
An application server is a much broader term. For example the servlet may need to invoke certain business logic components like beans or activex dlls. The server that hosts these components is the application server.
Hope you are clear now.

Web Server Filter Based SSO to Non-SAP Apps

Hi,
I am following SAP Note 442401 for configuring the Non-SAP App for Web Server Filter based SSO using SAP Logon Ticket. Also, I have downloaded the 5_0_2_8.zip file.
The Readme doc of this zip file says:
"<b>Changes in Web server filter plugins
The Web server filter plug ins and the Ticket Toolkit now were separated.
See subdirectories for further information:
"C" the Ticket Toolkit
"filter" the Web server filter plug ins
This is the last released version (5.0.2.8) on SAPSERV.
Pleaser refer for newer versions to SAP Service Marketplace (http://service.sap.com/patches)
Technology Components-> SAP SSOEXT -> SAP SSOEXT</b>"
Zip file has two folders named "C" and "filter".
"C" folder has cpp code to varify the ticket.
"Filter" folder has DLLs for the different web servers.
So far so good . Now, what I want to know is that is placing the DLL from the Filter folder onto the respective web server and doing some configs, as per the PDF provided with ZIP file, enough?
Or do I need to do anything else, like writing any class to read and validate the Ticket?
Thanks,
Vivek

See Web Server Filter Based SSO to Non-SAP Apps

The tool was unable to install Application Server Role, Web Server (IIS) Role.

Hi,
After running the prerequisiteinstaller.exe of SharePoint 2013 I am getting the below error in the logs
The tool was unable to install Application Server Role, Web Server (IIS) Role.
Web server role,application server role is already there in the server.
Ran the necessary power shell commands but still not able to proceed with this error.
Please share your inputs to cross over this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

HI Sudheer,Please check the link below that explains the solution for the same issues.
http://expertsharepoint.blogspot.de/2014/01/the-tool-was-unable-to-install.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

SharePoint 2013 preinstaller error - The tool was unable to install Application Server Role, Web Server (IIS) Role.

I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.log

It looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role

Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
Alan

ServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

NI Application Web Server refuses to be enabled

I'm trying to deploy a web service made in LabVIEW 2010 and it fails to deploy saying that the NI Application Web service is not running....
So I connect to http://localhost:3580, login as Admin (blank password) and click the web servers page. There I set the port of the Application Web Server to 8080, click the enable checkbox...and hit the apply button - and the only thing that happens is that the browser shows the Error on page symbol in its status bar....There is no "Yes" showing next to the Enable checkbox like for the system web server...
So - if I start from scratch again and do the same, but also click the 32 bit radio button prior to hitting the apply button - what happens? Well, then I get an error dialog:
The service itself (32bit, the 64 bit is listed but not as started) is running according to the services control panel...
I'm stuck....So do anyone know what's missing here, is there something I'm doing wrong, or something that needs to be done prior to activating the application service?
MTO
Solved!
Go to Solution.

Uninstalling and reinstalling 32 bit LabVIEW 2010 on two different machines revealed that the problem only showed up on my 64 bit Vista macine - not the 32 bit Windows 7 macine...
Looking at the services running on the machine with the problem I could see that it was running the 32 bit version of the Web application server, had a 64 bit installed but set to disabled....- but - only the latter was set to depend on the NI Web server service. This looked a bit strange as the 32 bit version on the 32 bit machine was dependant on the NI Web Server....
So - I disabled the 32 bit NI Web Application server service, enabled the 64 bit...and voila - I am now able to configure the Web Application Server to start.
So why is both the 32 and 64 bit Web application services installed, with only the 32 bit one running - but not properly? Is this what happens to everyone, but everyone fixes it by switching to the 64 bit version...or is there something that causes the installation to get messed up?
MTO

Sun Java System Web Server 6.1 SP3 service-j2ee threads problem

Hi,
Sorry my english.
I'm an intermediate Java programmer and a newbie in
the Sun's web servers world.
I'm doing an evaluation of an web applicaction
written in Java Servlets that is
supposed to have a leaking threads problem. We use
SunOS 5.9 (... sun4u sparc SUNW,UltraAX-i2) and
JVM 1.5 Update 4 (the problem is presented too
in SunOS 5.8 and JVM 1.4.2_04).
We have seen, thanks to 'prstat' (PROCESS/NLWP) a
increasing thread's growing in one of the process
that correspond to our web server instance (I'm sure I'm
looking the right process). I have checkout the source
code and it seems like the app doesn't have threads
problems. I have used the Netbeans Profiler and I see a
high number of threads called service-j2ee-x that grows
in congestion moments and never disappear.
Anybody could help me with suggestions?
Thank you very much.

Elvin,
Thankyou, yes I am unfamiliar with debugging Java apps. I got the web server Java stack trace and I have passed this on to the developer.
The web server finally closes the socket connection after the total connections queued exceeds 4096.
There are several hundred entries like this... waiting for monitor entry.. could be a deadlock somewhere?
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "service-j2ee-506" prio=5 tid=0x04b62a08 nid=0x17a waiting for monitor entry [dd74e000..dd74f770]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.verity.search.util.JSDispenser.getConnResource(Unknown Source)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: - waiting to lock <0xe979b2b0> (a com.verity.search.util.JSDispenser)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.verity.search.DocRead.getDoc(Unknown Source)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.verity.search.DocRead.getDoc(Unknown Source)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.verity.search.DocRead.docViewIntern(Unknown Source)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.verity.search.DocRead.docView(Unknown Source)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at au.com.relevance.viewDoc.PdfXmlServlet.performRequest(PdfXmlServlet.java:120)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at au.com.relevance.viewDoc.PdfXmlServlet.doGet(PdfXmlServlet.java:141)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "StandardManager[highlight]" daemon prio=5 tid=0x000f3530 nid=0x1e waiting on condition [e15ff000..e15ffc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.threadSleep(StandardManager.java:800)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.run(StandardManager.java:859)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "WebappLoader[highlight]" daemon prio=5 tid=0x000f3328 nid=0x1d waiting on condition [e16ff000..e16ffc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.loader.WebappLoader.threadSleep(WebappLoader.java:1214)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.loader.WebappLoader.run(WebappLoader.java:1341)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "StandardManager[]" daemon prio=5 tid=0x000f2b08 nid=0x1c waiting on condition [e1b7f000..e1b7fc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.threadSleep(StandardManager.java:800)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.run(StandardManager.java:859)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "WebappLoader[]" daemon prio=5 tid=0x000f2900 nid=0x1b waiting on condition [e1c7f000..e1c7fc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.loader.WebappLoader.threadSleep(WebappLoader.java:1214)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.loader.WebappLoader.run(WebappLoader.java:1341)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "StandardManager[sitesearch]" daemon prio=5 tid=0x000f1cd0 nid=0x1a waiting on condition [e23ff000..e23ffc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.threadSleep(StandardManager.java:800)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.run(StandardManager.java:859)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "WebappLoader[sitesearch]" daemon prio=5 tid=0x000f1ac8 nid=0x19 waiting on condition [e24ff000..e24ffc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.loader.WebappLoader.threadSleep(WebappLoader.java:1214)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.loader.WebappLoader.run(WebappLoader.java:1341)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "StandardManager[search]" daemon prio=5 tid=0x000f0a88 nid=0x18 waiting on condition [e317f000..e317fc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.sleep(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.threadSleep(StandardManager.java:800)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at org.apache.catalina.session.StandardManager.run(StandardManager.java:859)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Thread.run(Thread.java:534)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "Signal Dispatcher" daemon prio=10 tid=0x000ef840 nid=0x12 waiting on condition [0..0]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "Finalizer" daemon prio=8 tid=0x000ef638 nid=0x10 in Object.wait() [fa27f000..fa27fc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Object.wait(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: - waiting on <0xe917fb10> (a java.lang.ref.ReferenceQueue$Lock)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: - locked <0xe917fb10> (a java.lang.ref.ReferenceQueue$Lock)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "Reference Handler" daemon prio=10 tid=0x000ef430 nid=0xf in Object.wait() [fa37f000..fa37fc28]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Object.wait(Native Method)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: - waiting on <0xe917fb78> (a java.lang.ref.Reference$Lock)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.Object.wait(Object.java:429)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:115)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: - locked <0xe917fb78> (a java.lang.ref.Reference$Lock)
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "main" prio=5 tid=0x000ee3f0 nid=0x1 runnable [0..ffbff200]
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "VM Thread" prio=5 tid=0x004ee328 nid=0xe runnable
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "VM Periodic Task Thread" prio=10 tid=0x004ee5d0 nid=0x16 waiting on condition
[15/May/2006:22:01:51] warning ( 3196): CORE3283: stderr: "Suspend Checker Thread" prio=10 tid=0x004ee548 nid=0x11 runnable
[15/May/2006:22:15:10] failure ( 3196): HTTP3287: connection limit (4096) exceeded, closing socket

Using Sun Web Server 6.1 from the IDE

Using JSE 8 with Sun Web Server 6.1 set as the target container, I have a SUNWS61deployment.xml file created.
That didn't exist in JSE 7. Is it WS 6.1 SP4 or SP5 -related ?
I also have ws61-sun-web.xml with a simple <sun-web-app/> tag (empty deployment descriptor).
What should this file contain? Is it a replacement for sun-web.xml?
Do I still need sun-web.xml? Its DTD declaration sounds like Sun
App Server 7 (http://www.sun.com/software/sunone/appserver/dtds/sun-web-app_2_3-1.dtd)
So you have plans to make "Sun Resources" (pools, JNDI resources, ...) created in the IDE be registerable directly in the Web Server just like it's possible with the sun app server?
How safe is it to use JSE 8 with an older Web Server Service Pack (say 6.1SP1)?

SUNWS61deployment.xml is created bythe IDE to be used internally and not to be used by the developer. This file wouldn't be sent to webserver after deployment.
The ws61-sun-web.xml is sun-web.xml only and yes it is same as it is in Appserver7 as the webcontainer for both Webserver6.1 and Appserver7 are same. After deployment to webserver, ws61-sun-web.xml is renamed to Webserver as sun-web.xml by the IDE. When opened the developer can edit in the XML editor.
The reason for having it as ws61-sun-web.xml in IDE is to avoid the clash between sun-web.xml of Appserver8.1 which is J2EE1.4 based whereas Webserver6.1 Web container is J2EE1.3 based.
It should be okay to use any service pack of Webserver6.1 with JSE8
Hope this helps

Tpc 2206 web server

Similar Messages

Maybe you are looking for