NI Application Web Server refuses to be enabled

I'm trying to deploy a web service made in LabVIEW 2010 and it fails to deploy saying that the NI Application Web service is not running....
So I connect to http://localhost:3580, login as Admin (blank password) and click the web servers page. There I set the port of the Application Web Server to 8080, click the enable checkbox...and hit the apply button - and the only thing that happens is that the browser shows the Error on page symbol in its status bar....There is no "Yes" showing next to the Enable checkbox like for the system web server...
So - if I start from scratch again and do the same, but also click the 32 bit radio button prior to hitting the apply button - what happens? Well, then I get an error dialog:
The service itself (32bit, the 64 bit is listed but not as started) is running according to the services control panel...
I'm stuck....So do anyone know what's missing here, is there something I'm doing wrong, or something that needs to be done prior to activating the application service?
MTO
Solved!
Go to Solution.

Uninstalling and reinstalling 32 bit LabVIEW 2010 on two different machines revealed that the problem only showed up on my 64 bit Vista macine - not the 32 bit Windows 7 macine...
Looking at the services running on the machine with the problem I could see that it was running the 32 bit version of the Web application server, had a 64 bit installed but set to disabled....- but - only the latter was set to depend on the NI Web server service. This looked a bit strange as the 32 bit version on the 32 bit machine was dependant on the NI Web Server....
So - I disabled the 32 bit NI Web Application server service, enabled the 64 bit...and voila - I am now able to configure the Web Application Server to start.
So why is both the 32 and 64 bit Web application services installed, with only the 32 bit one running - but not properly? Is this what happens to everyone, but everyone fixes it by switching to the 64 bit version...or is there something that causes the installation to get messed up?
MTO

Similar Messages

Discoverer Portlet Provider, No Response from Application Web Server

I must have some odd configurable incorrect. I hope one of you can help me out and point me in the right direction.
My issue involves the "Discoverer List of Worksheets" portlet. It will display all the workbooks and I can drill in and see the worksheets, but, when I click/choose a worksheet, it will return within a couple seconds and display "No Response from Application Web Server" in bold red letters, then "There was no response from application ...", then "Please notify the site's webmaster ...". I have spent the day trying to lock down a log on the http server, j2ee, web cache and used enterprise manager to see logs which changed immediately after the error but didn't seem to find much.
What am I missing? Is there a timeout somewhere? Does it look like I missed something when I configured anything?
Below are the configurables and answers to some of the obvious questions.
Thanks,
BC
Windows 2003 sp1
App Server 10.1.2.2.0
Discoverer 10.1.2.54.25
ssl -> no
sso -> yes
provider registration:
http ://luke.xxx.com/discoverer/portletprovider (actual does not have a space after "http")
"cookie domain" not checked
"user has the same identity ..."
user/session --> "once per user session"
from web cache log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKC ... 4hUQ%3D%3D HTTP/1.1" 302 1909 "6959909483946,0"
10.2.2.226 - - [18/Jul/2007:18:17:37 -0700] "GET /osso_login_success?urlc=v1.4~534 ... 774851DD HTTP/1.1" 503 40
2 "6959909483946,0"
from middle tier http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKCk ... a4hUQ%3D%3D HTTP/1.1" 302 1921
from infrastructure http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~BFE8 ... HTTP/1.1" 302 4998
url being passed from provider:
http ://luke.xxx.com/discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_samewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F1048&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NAME_241292&vw_partitionid=241292&&vw_return_url=eNr ... 1z9AEA6Dsegw%3D%3D
url that returns:
http ://luke.xxx.com/osso_login_success?urlc=v1.4~0C549F ... 3E94
the rest should be obvious:
Processes in Instance: rc_luke_mt1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 5352 | Alive
OC4J | home | 2764 | Alive
OC4J | OC4J_Portal | 2452 | Alive
OC4J | OC4J_BI_Forms | 3644 | Alive
WebCache | WebCache | 5372 | Alive
WebCache | WebCacheAdmin | 2608 | Alive
HTTP_Server | HTTP_Server | 5204 | Alive
Discoverer | ServicesStatus | 5860 | Alive
Discoverer | PreferenceServer | 5580 | Alive
wireless | performance_server | 5216 | Alive
wireless | messaging_server | 4872 | Alive
wireless | OC4J_Wireless | 6116 | Alive
DSA | DSA | N/A | Down
Processes in Instance: rc_luke_infra1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 2768 | Alive
OC4J | oca | 2312 | Alive
OC4J | OC4J_SECURITY | 5348 | Alive
HTTP_Server | HTTP_Server | 3036 | Alive
DSA | DSA | N/A | Down
OID | OID | 2492 | Alive
Congratulations! You have successfully reached your Provider's Test Page.
Recognizing Portlets...
default_gauges_portlet_name
default_worksheet_portlet_name
default_list_of_worksheets_portlet_name
Recognizing initialization parameters...
oracle.portal.log.LogLevel : 7
Recognizing component versions...
ptlshare.jar version: 10.1.2.0.2
pdkjava.jar version: 10.1.2.0.0

hi,
i also got the same error on my IE when i want to run VPE Workbench 5.6
the error :
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
The error came up after i update the windows server (restart server), before that everything is running fine and ok.
I dont know where the problem is. Is it because the update? or Application Server?
I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

No Response from Application Web Server - j2ee when running a long report

Using Oracle Application server, 10.1.2 and a j2ee application which uses Oracle Reports to create pdf report output.
When a report takes 5 mins or more to be produced, the following error message occurs, ending the session. The report request however does continue to run, and the pdf is eventually
produced on the server, but the user cannot retrieve it. So I know the report server is still going after getting this error:
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
I'm assuming this is a timeout setting in a configuration file, but where?
Thx,
Tim

Hi Tim,
Take Backup of httpd.conf from Oracle_home2(midtier)
Now Edit httpd.conf, set timeout 1200 ie 20 mins (this depends on you how much time u need to set Note: Values are in seconds)
Now restart entire Mid tier
Then run the report again.
Regards
Fabian

Configure Oracle Applications Web Server

Could anyone guide me in how to configure Oracle applicaions to be accessed via INTERNET & what's the requirements to make this cometrue??????, i'll appericate anyhelp.
Thnx

Hi,
To configure Oracle Applications Web Server on what is your Oracle Apps version?
If you can get back to with required info will be able to solve your problems.
Thanks and Regards
Riyas
Oracle Applications DBA
Kuwait

Configure application web server deshabilitado LV2014

Hola, estoy teniendo problemas para usar el web publishing tool, ya que me deja publicar en el explorador pero sólo en modo snapshot o monitor, si lo pongo en embedded se queda según descargando y nunca se carga. Quiero agregar que he usado esta herramienta varios años seguidos, y ya he utilizado las opciones de solución que he encontrado. Noto que en ésta ocasión al entrar a Tools>> Options>> Web server, el botón de Configure Application Web Server se encuentra deshabilitado, he checado el silverlight está instalado y actualizado, he instalado LabVIEW runtime browser plug in, tanto para 32 como para 64 bits.
Las diferencias que tengo con años anteriores son: Laptop de 64 bits (antes tenía de 32) y LabVIEW 2014 (con 2013 funcionaba bien).
Agradecería si alguien se ha topado con éste error y lo ha solucionado me dijera cómo puedo hacerlo. De antemano gracias por su atención.

Saludos Crystal71,
Gracias por utilizar los foros de discusión de National Instruments, me gustaría corroborar si has consultado y seguido el siguiente documento:
Web Publishing Tool Using Embedded Viewing Mode and Default HTTP Port Fails to Load:
http://digital.ni.com/public.nsf/allkb/983366C0ED1A91A68625765500542FD0?OpenDocument
Quedo al pendiente de tus comentarios, saludos.
David P.
National Instruments
Applications Engineer
www.ni.com/soporte

Web server refuses connections - Service exited with abnormal code: 1

I have upgraded to yosemite 10.10.1, my web server refuses to allow connections and I get - Service exited with abnormal code: 1, in the log file. I have reloaded server software and I have rebooted and power restarted my Mac Mini many times

Fixed this stupid iTunes issue with the following procedure. YMMV
- Open the Activity Monitor (LaunchPad, Other, Activity Monitor)
- Force Quit the iTunes Helper app (I had multiply ones running, so quit them all)
- Install the iTunes .pkg from the Apple website.
- Force Quit the iTunes Helper again after install
- Shut Down the MacBook
- Start again (watch for the progress bar, that’s the fix for permissions working)
- Start iTunes
You mileage may vary, but it worked for me.

Calendar Page displays No Response from Application Web Server

Hi there,
I have OCS 9.0.4 on a linux ES 2.1 box (single box install). The installation went fine without any errors. When I click the Oracle Calendar Administrator link on the OCS welcome page and sign on using SSO, I get "No Response from Application Web Server.
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later. " Any ideas what is wrong ? The calendar server started without any errors (and I restarted HTTP on the midtier). Also, when I access the calendar page thru "http://midtier:7778/ocas-bin/ocas.fcgi?sub=web", only orclguest can login successfully. Every other user gets "Calendar Server connection error. Contact your Administrator" .
I appreciate every help.

Hi!
Try the following:
a) go to the midtier:port/um/admin/UMAdminLogin.uix and log in as UMADMIN with the password you specified during the installation
b) create a mail user (one that already has an account in the OIDDAS)
c) give that mail user the domain admin right
d) logout
e) login to the collab suite main page (midtier:port/pls/portal) with this user
f) you should see the collaboration suite portlets
g) go to messages
h) click on the administration tab
i) go to calendar admin
j) create a calendar account for this user
Hope this helps
cu
Andreas

No Response from Application Web Server

Hi,
I have problem to open my web conference page from Oracle Colaboration Page in Quicklinks. I will get "No Response from Application Web Server" whenever i click on Web Conferens link.

hi,
i also got the same error on my IE when i want to run VPE Workbench 5.6
the error :
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
The error came up after i update the windows server (restart server), before that everything is running fine and ok.
I dont know where the problem is. Is it because the update? or Application Server?
I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

Error "No Response from Application Web Server"

Hi folks,
When i'm trying to access the database through grid contorl... i'm getting the following error... Any ideas to resolve it?
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.

Hello,
Is it possible that not all of your iAS services are started ?
Try to run $ORACLE_HOME/opmn/bin/opmnctl status -l
to see if for example the Http server process is down...
If it is down, then restart it up with the command :
opmnctl startproc ias-component=HTTP_Server
(same for any other mid-tier process).
Hope this can help you.
Steff

Web application/ Web server can't be started

Hi expert,
i've again an issue with my BOFC application. The web server cannot be started so that i can't log in into the web client. I've already started and restarted the Ctbroker and IIS services. What should i do next?
Thanks in advance.
Dany

Start with the obvious.
It's showing as started in the Services panel?
Are you sure it's running on 389?
Try connecting with command line tool like ldapsearch.

Oracle Reports Integration with iPlanet Application/Web Server

Do any body know if we can integrate Oracle Reports with iPlanet Application Server or Web Server?

Theoretically yes, in Reports 6i there is either a CGI or servlet to set up, in 9i there is a servlet interface.
In practice through this is not simple, at least in the 9i case, and with Oracle 9iAS a reports server comes configured out of the box.
Regards,
Danny

Apache2 local web server + Perl 5 + mysql problem

this problem has been bugging me for some months; it's stopping me developing on my new MBP.
I cannot connect to mysql 5.0.45 database when web sharing w/ Apache2 with either Perl 5.8 & Activeperl 5.10 cgi scripts on Mac OS X Leopard 10.5.2 & 10.5.3
Although I can connect to the mysql DB when running the Perl scripts from the command line.
The problem only occurs on my local web server in Mac OS X 10.5.2 & 10.5.3.
On my old development Mac running 10.3 the code runs fine, as it also does on my remote site.
server error log: Can't locate DBD/mysql.pm . . .
I suspect there is a problem somewhere between Apache2, Perl & MySQL.
Please advise.
Sarpedon Jones
Message was edited by: Sarpedon Jones

I've got the same problem but It sounds like I've gotten farther. I was forced to do an emergency move of some Perl and PHP sites to 10.5.4 when our 10.4 web server refused to authenticate to AD anymore...
Leopard's Apache/Perl support is terrible. There is not click to add option anymore so you have to manually set up mod_perl. No big deal but the first sign that there isn't reasonable support.
The bigger issue is that Apple's Perl will not compile some modules.. namely DBD::mysql.
Normally you'd use "cpan" to install the modules you need. The core module for connecting to a mysql database is DBD.. specifically DBD::mysql
You should be able to run "cpan" or "cpanp" [cpan plus] to get a cpan interactive prompt. At this point you should be able to compile DBD by issuing either of the following:
"install DBD::mysql" or
"install Module DBD::mysql"
I've tried this on two installs of OS X Server and that module (and others) will not compile on either system. One of my servers had been set up as a Wiki server before but the other had not been running any web services before I started using it as a test bed for my site move. (BTW these sites are unavailable until I can move them).
There is another bug (noted on mysql's site) with Apple's version of cpan. If you try to add some modules, cpan will report that it needs to install a new, full version of Perl. The recommendation is to not do this, but rather force the install.. "install f DBD::mysql"
Forcing the install is a questionable idea but it doesn't work anyway.
I eventually did install perl 5.0.10 on the system in /usr/ and that does allow me to compile the needed Perl mods. However, the global @INC path has the old Perl paths listed so my perl CGIs will not use the new perl install.
I'm sorry I don't have a solution. Hopefully my troubleshooting will elicit some more feedback.
steven.

Regarding the performance comparision of application/web servers

i want the details of performance comparision of application/web servers and which is the best, efficient and easy to use.

Try google.
However for the most part the performance is not related to the application/web server that you use.
It more depends on
- the machine you are running it on
- what code you are running on it.
With regards to "best", you can debate that forever.
Tomcat is widely used, mainly because it is free. But it is solid.

Installing CGI on SunOne Web Server - Help!

I'm new to the SunOne WebServer and am trying to get CGI/Perl to work. I've tried all I know at the CGI directory page but still can't get Hello World to show up.
Running it as *.cgi shows a 405 - Method Not Allowed Error.
Running it as *.pl prompts me to save the file - you only get that when path to Perl is not correct, no?
What else do I need to know/change on the web server to get it to run?

You have not indicated the web server version and OS that you are using. Anyway, the error that you report is probably because the CGI is not configured correctly on this server. Here are the docs for Web Server 6.1 to enable CGI:
http://docs.sun.com/source/819-0130/agprgrm.html#wp21207
Thanks
Manish

What am I doing wrong when running multiple applications with the Web Server enabled ?

I am running multiple Vi's (applications) on the same Nt Workstation and the Web Server is enable for all applications. However, I am able to view only one Panel from the browser. Only the first application that is started can be viewed. What am I doing wrong ?

Only one application can act as a web server at the default http port 80.
To solve this either run all VIs into a single application or use different
http ports for each application. For example an application can use the
default port 80 and others use ports 8080, 8081, 8082 etc.
In the browser, you enter the URL for non default ports as
http://hostname:8080/...
HTH
Jean-Pierre Drolet
"zemaitis" a ecrit dans le message news:
[email protected]..
> I am running multiple Vi's (applications) on the same Nt Workstation
> and the Web Server is enable for all applications. However, I am able
> to view only one Panel from the browser. Only the first application
> that is started can be viewed. What am I doing
wrong ?
LabVIEW, C'est LabVIEW

NI Application Web Server refuses to be enabled

Similar Messages

Maybe you are looking for