Trace statements not outputting to console when running in AIR simulator

I'm using FB 4.7 and the latest AIR SDK beta. When I debug on a device, the console window works properly. I've tried the solution from this thread http://forums.adobe.com/thread/750219?tstart=0 , but it didn't solve the problem. I haven't changed anything about the build configuration. Any ideas?

I have the same question... I've been trying to get an Adobe AIR HTML app going, but there appears to be no IDE that supports debugging an HTML/JS AIR App, and fdb, which is supposed to be able to debug HTML/JS AIR apps, does not.
Is HTML/JS still a supported way of developing Adobe AIR apps? If so, then why aren't issues like this getting some attention?
-Josh

Similar Messages

[svn:fx-4.x] 14327: Fix maximize/ restore button in spark chrome skin when running on AIR 2.

Revision: 14327
Revision: 14327
Author:   [email protected]
Date:     2010-02-22 08:48:05 -0800 (Mon, 22 Feb 2010)
Log Message:
Fix maximize/ restore button in spark chrome skin when running on AIR 2.
Listen for the Window state change event instead of expecting the change to happen immediately.
QE notes: None.
Doc notes: None.
Bugs: SDK-25303
Reviewer: Alex
Tests run: checkintests
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25303
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/airspark/src/spark/components/Window.as
    flex/sdk/branches/4.x/frameworks/projects/airspark/src/spark/components/WindowedApplicati on.as
    flex/sdk/branches/4.x/frameworks/projects/airspark/src/spark/components/windowClasses/Tit leBar.as

Stope
Mailing me ***
Sent from my I phone

Html App: air.trace() not outputting to console... are Adobe still supporting html apps in AIR?

Hi
Just getting up and running
Mac OS X 10.9. Adoe AIR 3.9. All working fine except air.trace() not outputting anything to the console.
Bit of googling meant I created a mm.config in ~ with the line:
ErrorReportingEnable=1
but still no joy.
Any other tips for getting this to work or is it just now broken and/or unsupported?
Are HTML apps wrapped in AIR now legacy technology?

I have the same question... I've been trying to get an Adobe AIR HTML app going, but there appears to be no IDE that supports debugging an HTML/JS AIR App, and fdb, which is supposed to be able to debug HTML/JS AIR apps, does not.
Is HTML/JS still a supported way of developing Adobe AIR apps? If so, then why aren't issues like this getting some attention?
-Josh

Trying to reinstall Mavrick OS but states not connected to internet when it clearly is.

After some hard drive issues I can only open the computer in Safe Mode. I am trying to install the Maverick OS but it keeps saying that it is not connected to the internet. When clearly it is... I have been able to search websites and I am typing this from the computer.
Other devices are also using the internet without any issues.
I have repaired disks as much as possible... I am running out of ideas...
Help!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

From LR 4.3, saved edits in Photoshop CS6 not changing in LR (when running an Action)

From Lightroom 4.3, I am editing to Photoshop CS6 and able to make my edits and adjustments with a couple of Nik Software plugins running in an Action. The Action saves correctly and the changes are visible in Photoshop. When I switch back to Lightroom, the changes did not save.
However, when I try to do the same thing and replicate the steps of the Action manually, the changes do save correctly and they are visible in Lightroom.
This same action worked perfectly fine before I updated to LR4.3. The Action is key to my workflow, and not being able to use it significantly slows me down.
Is there a workaround known?
Thanks!
Nick

Web-Weaver,
Thanks for that detail. When I looked at my Action, it indeed was a <save as> command. So I re-recorded the Action, and recorded <save>, but in the Action, it still shows up as a <save as> recorded entry. I don't seem to be able to edit the entry to make it just a <save>.
Some additional detail, the <save as> that was recorded specifies that it be saved as a PSD format, and it also specifies a distinct filename and location. When I created a Droplet, and ran it on several files, they were all saved to that same filename.
Any further suggestions?
Thanks,
Nick

Query not refreshing all data when run in workbook with other queries

All,
I have the following problem. I have a workbook that has two queries, one on each tab.
The specific thing I notice that the company code is not showing up in the query at first until I hit refresh. Both queries use the same company code and user variables. When running the workbook I have each query set to "refresh query when running workbook". I have been able to duplicate this problem in either of the two queries, depending upon which company code variables I use. When I run the workbook, one of the two queries never updates company code variable unless I "refresh" the query directly after pulling up the workbook.
I have changed the company code variable and used other company codes in each query, some required, some not, but ultimately a few of the key figures are not populating with current data and the company code is missing...unless I hit refresh on that query. I have tried creating new workbooks and removing and reinserting the queries, but this doesn't work either.
And both queries run fine when executed alone.
Again, Both queries use the same company code variable.
Any help will be rewarded with points and is appreciated.

Tasha,
Remove the queries from the workbook and reinsert them. This should show the desired result.

Report with BDC not displaying success message when run in Background

I am running a BDC report in Background mode.The below statement is not capturing the Success message when a document is posted.But when I am running the same in ForeGround mode it is capturing and is displayed in the output.Can anyone please help me in understanding why this is happening and how can I resolve this.
CALL TRANSACTION 'MB1C' USING bdcdata MODE mode UPDATE 'S'
MESSAGES INTO messtab.

Hi Madhu,
I think your BDC didnt generated any document when you run it in 'N' screen mode.
Debug your program when you run it in background
Goto Tcode :SM37
Select the job ( march checkbox )
==> in command prompt enter 'JDBG'
==> Then you can start reexecting the job .
You can check the sucess messages accordingly in debug mode
Also add a read statement on messtab for msgtype = 'S'.
Thanks
Bhanu

Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)

When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
Attached is LV version 10 and 11
Thanks for the help
Attachments:
LCT_DAQmx v11.0.vi ‏173 KB
LCT_DAQmx.vi ‏135 KB

There are some things you can probabaly do fairly easily. Four of the inner while loops appear to be very similar. You could probably make a subVI from one of them and reuse the code. Some of the shift registers are initialized and some are not. I suspect that this is an error, although I did not look closely enough to determine which way is intended. Read up on reentrancy. You may need that for the subVI.
The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button. Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter). The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
You Dequeue in two places in each loop. There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first. Also, none of the Dequeues has a timeout set. They will wait forever if no data is available. Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
Lynn

Keycode Trace Function not outputting all Keycodes

The trace function in this file doesn't output all of the
keycodes on my keyboard. Some letters generate a keycode and others
don't. For instance, "u" outputs 85 but "i" outputs nothing.
Here's the trace function...
trace(event.keyCode);
And here's the rest of the code which is a work in
progress...
package {
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.Event;
import flash.events.KeyboardEvent;
import flash.ui.Keyboard;
public class Velocity3D extends Sprite
private var ball:Ball;
private var xpos:Number = 150;
private var ypos:Number = 0;
private var zpos:Number = 150;
private var vx:Number = 0;
private var vy:Number = 0;
private var vz:Number = 0;
private var friction:Number = .98;
private var fl:Number = 250;
private var vpX:Number = stage.stageWidth / 2;
private var vpY:Number = stage.stageHeight / 2;
private var ballb:Ball;
private var xposb:Number = 130;
private var yposb:Number = 0;
private var zposb:Number = 150;
private var vxb:Number = 0;
private var vyb:Number = 0;
private var vzb:Number = 0;
public function Velocity3D()
init();
private function init():void
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
ball = new Ball(40, 0xff0000);
ballb = new Ball(40, 0xffff00);
addChild(ball);
addChild(ballb);
addEventListener(Event.ENTER_FRAME, onEnterFrame);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyDown);
private function onEnterFrame(event:Event):void
xpos += vx;
ypos += vy;
zpos += vz;
vx *= friction;
vy *= friction;
vz *= friction;
xposb += vx;
yposb += vy;
zposb += vz;
vxb *= friction;
vyb *= friction;
vzb *= friction;
if(zpos > -fl)
var scale:Number = fl / (fl + zpos);
ball.scaleX = ball.scaleY = scale;
ball.x = vpX + xpos * scale;
ball.y = vpY + ypos * scale;
ball.visible = true;
else
ball.visible = false;
if(zposb > -fl)
var scaleb:Number = fl / (fl + zposb);
ballb.scaleX = ballb.scaleY = scale;
ballb.x = vpX + xpos * scale;
ballb.y = vpY + ypos * scale;
ballb.visible = true;
else
ball.visible = false;
private function onKeyDown(event:KeyboardEvent):void
trace(event.keyCode);
switch(event.keyCode)
case 87 :
vy -= 1;
break;
case Keyboard.NUMPAD_2 :
vy += 1;
break;
case Keyboard.NUMPAD_4 :
vx -= 1;
break;
case Keyboard.NUMPAD_6 :
vx += 1;
break;
case Keyboard.UP :
vz += 1;
break;
case Keyboard.DOWN :
vz -= 1;
break;
case Keyboard.F1: //82
vyb -= 1;
break;
case Keyboard.F2 : //67
vyb += 1;
break;
case Keyboard.F3 : //68
vxb -= 1;
break;
case Keyboard.F4 : //70
vxb += 1;
break;
case Keyboard.F5 : //65
vzb += 1;
break;
case Keyboard.F6 : //90
vzb -= 1;
break;
default :
break;
This is the ball class...
package {
import flash.display.Sprite;
public class Ball extends Sprite {
public var radius:Number;
private var color:uint;
public var vx:Number = 0;
public var vy:Number = 0;
public var mass:Number = 1;
public function Ball(radius:Number=40, color:uint=0xff0000)
this.radius = radius;
this.color = color;
init();
public function init():void {
graphics.beginFill(color);
graphics.drawCircle(0, 0, radius);
graphics.endFill();
}

Okay, when I open the KeyViewer.swf file from the Colin Moock
book when not in Flash. All the keycodes show up when I run the
program. However, when I open the KeyViewer.as file and create a
.fla file in Flash then run the program using Ctrl+Enter, some of
the keycodes don't show up. Same problem as the other program. Why
would a .swf outside of Flash work correctly but the .swf when used
in Flash doesn't? Even the new .swf file that is created when I
press Ctrl+Enters works correctly when I open it outside of Flash.
But when I open it in Flash it doesn't work. Weird.
package {
import flash.display.*;
import flash.events.*;
import flash.text.*;
import flash.ui.*;
// Displays the keycode and character code for any key
pressed.
public class KeyViewer extends Sprite {
private var keyoutput:TextField;
public function KeyViewer () {
keyoutput = new TextField();
keyoutput.text = "Press any key...";
keyoutput.autoSize = TextFieldAutoSize.LEFT;
keyoutput.border = true;
keyoutput.background = true;
addChild(keyoutput);
stage.addEventListener(KeyboardEvent.KEY_DOWN,
keyDownListener);
private function keyDownListener (e:KeyboardEvent):void {
keyoutput.text = "The key code for the key you pressed is: "
+ e.keyCode + "\n";
keyoutput.appendText("The character code for the key you
pressed is: "
+ e.charCode + "\n");
keyoutput.appendText("The character for the key you pressed
is: "
+ String.fromCharCode(e.charCode));

Page breaks appear in the spool output of report when run in the background

Hi All,
Report is using fm 'REUSE_ALV_GRID_DISPLAY' to display the report. parameters passed to this fm for display are :it_fieldcat,is_layout,it_events,t_outtab.
Page breaks appear in the spool output when report is run in the background.These page breaks needs to be removed. When executed in the background, the excel extract should be the same as if pulling directly from the report itself.
How to remove the page breaks in background?
Thanks & Regards,
Abhishek Singh

Hi
You can use the below code , which the reprt run in background. If you run the report in background thenyou need to use 'REUSE_ALV_LIST_DISPLAY'
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING e_offline = off.
IF off IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
ENDIF.
Regards

Why does Firefox 7 does not find Java1.6 when running on a Win2000 PC

Operating system is Win2000
Java-version = 1.6.0_16
When going to the menu Tools->Add-Ons->Plugins Java is not there.

I have Avira Free. I've been using it, Windows 7 and Firefox on this machine for two years through multiple updates of Firefox. Never had this problem before the update to version 10 came out. I do have Secunia software running too, which occasionally jumps in and tells me when stuff is out-of-date, including Firefox. I just uninstalled Firefox 3.6, and did a total new reinstall, and am for sure running version 10 now. Yet Secunia thinks that I have out-of-date 3.6 which needs updating. So something is being left behind.

No output no error when running reports 6i on WEB

Hello reports Gurus,
Sorry for posting the same problem.It's very important for me to have a solution.
Here is my problem:
I'am using reports 6i with Apache web server on SUN SOLARIS 9.When Trying to access to the report server(http://host:7778/dev60cgi/rwcgi60/showenv?server=rserver) a blank page appear without error.
What's the problem.PLZ help it's important.
Thank for ur help!

Hello Saumen!
Thank for ur answer.I'm not trying to run a report on web.First i just tried to check the report server : http://hostname:port/dev60cgi/rwcgi60/showenv?server=rserver.
But i receive no display and no error.Here's my problem.
What can i do for report works fine on web.
Remain that i'm using reports 6i, with Apache web server on SUN SOLARIS
Any idea!

Not taking the PLL when running the form.

Hello ALL,
I am using forms 10.1.2.3.0 and oracle 11g. I am trying to setup a application (form) server in my local machine (Windows XP 32 bit). From the local setup I am able to excess the forms which doed not have any PLL attached, but if there are any PLL attached to the form and I am excessing the procedure from the PLL then it is throughing the error FRM 40735.
From this I found that it is not able to excess the PLL files at the run time. All the PLL and PLX are in the same path where my fmx are there. Also when attached the PLL the "Remove path" is Yes.
Can any body suggest any solution?
Thanks,
SUN
Edited by: User SUN@ on Nov 18, 2009 2:51 PM

Try to put the path where your fmx's and plx's are located into the setting FORMS_PATH in your env-file (by default, this is $ORACLE_HOME/forms/server/default.env)

404 Error (not found) for webfragment when running from OEPE (split source)

For a large project, we are developing several JSF modules as JARs which then become packaged inside a single WARs WEB-INF/lib, which in turn will be the only substantial part of an EAR.
When I build with maven / run from command line, everything works fine.
But when I run from OEPE using the split source structure (actually also when I run from command-line using the split source structure that OEPE has generated), all the JSF in the JARs are not found anymore, and I get a 404 Error in the browser.
I can reproduce the problem with a minimal set of almost-empty Eclipse projects (one WebFragment, one WAR, and an autogenerated EAR).
(too bad I can't attach it here)
The generated .beabuild.txt is as follows:
C\:/workspaces/weblogicear/WebFragmentWAR/WebContent = WebFragmentWAR.war
C\:/workspaces/weblogicear/WebFragmentWAR/build/weboutput = WebFragmentWAR.war
C\:/workspaces/weblogicear/WebFragmentWAR/build/classes = WebFragmentWAR.war/WEB-INF/classes
C\:/workspaces/weblogicear/WebFragment/bin = WebFragmentWAR.war/WEB-INF/lib/WebFragment.jar
Under WebFragment/bin/META-INF/resources I have an index.xhtml, which is not found by Weblogic's implementation of ExternalContext.
See also this thread (without answer): When web apps/war published via OEPE I get '404 Not found' on access I don't know if the original poster had the same problem. I tried to reply there, but my reply doesn't show up.

> The Testing Server Folder is:
D:\Inetpub\wwwroot\Zero-ten\www\
> The URL prefix is:
http://localhost/zero-ten/www/
> Is that the problem?
In the testing server folder you have a CAP Z
in the URL prefix you don't have a cap.
Also, would need to know more about your testing server
(what type) if there are additional problems.

Trace statements not outputting to console when running in AIR simulator

Similar Messages

Maybe you are looking for