Track and report DB & os changes

He people
How do i track/report on recent changes made in SAP.
I am aduiting change management and i have a list of changes made of the system that have be logged in a chg mgt system (changes like Security fixes in PRD environment, Remove /lock old staff Unix accounts from PRD, run cfgmgr on all sap application server,restart srcmst, Installation /Upgrade /Maintenance etc)
But i do not want to rely completely on the infor given, i want to be able to check from the source (ie the sap system) what changes have been made recently.
Any suggestion is appreciated.
thx

Hi,
If you see the SAP Profiles from the OS level,it record all the changes done.For the DB if its DB2 from ST04 there is an option 'Audit' to see this.
Regards,
Sam

Similar Messages

Is there aog file which tracks when report developers make changes?

Is there a log file which tracks when report developers make changes to the report structures in Essbase 11?
Thanks

I'm confident there is not an audit report which will track the exact changes to a financial report.
There may be something that note that a report was modified however I am a little doubtful about that.
In most enterprise environments (large companies) report writers/developers do not have direct access to modify production financial reports. They would be created in a non-production environment and a third party would move them. Obviously not all companies have the resources to work in this manner. There are audit mechanisms for the Life Cycle Management (LCM) tool -- check out the epm_security.pdf guide at http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security.pdf
Other folks thoughts?
Regards,
John A. Booth
http://www.metavero.com

Tracking and reporting

I am creating a training course in Captivate. I need to
include a tracking and reporting of student results and be able to
have them print a certificate of completion. Can anyone help me
with these items?

Hi rita the reader
For the tracking, I think you probably want to use a Learning
Management System (LMS). The link below will take you to a list of
articles dealing with LMS.
Click here to see the list
of articles
As for the certificate, you might be interested in fellow
Adobe Community Expert Paul Dewhurst's solution.
Click here to
visit Paul's Site
Hopefully this helps a bit... Rick

Item(select list) with LOV and Report with link = changed value item

Hello,
On one page I have:
- Item 'P_name' (select list) with LOV to select name of a person;
- Items 'factory' and Report 'factory'(standard created with 'Form with Report' on the same page).
Situation:
All works fine. I selected first a LOV Item 'P_name' (say 'Jane'). But....
Only when I select a record (to change the values) from the report 'factory' then LOV Item 'P_name' become empty. Report used a link to the same page to fill the report items 'factory' and make also the LOV item empty.
Question:
I have made a process that write the name 'Jane' to table.
I see two possibilities:
- LOV Item value => fill the LOV item with 'Jane' from the table before region. Is this possible?
- Report => What is the buttonname of reportlink? I can use this name in the processes.
Thanks Walter!

1) what i meant was for you to test this ridiculously huge LOV outside of htmldb, but it occurred to me last night that you could, in fact, be hitting a limit of ours. after some poking around, i have confirmed that. select list items in htmldb are currently limited to 10,000 rows. this was initially done for performance reasons, but they're now opening up the restriction. if you really need to work with that many rows where the user is allowed to pick from a set of values, consider using a popup item type instead. it'd help your app performance as well (in my test cases, it stank to have to wait for my 10k select list rows to come down to my browser).
2) sorry to not have been more clear about this, but when you set your item's "Source Type" back to "Database Column", you'd have to specify that column in the "Source or value expression" field. also, you can't put a sql query into that "Post Calculation Computation" field. as i said before, "you can take a look at the attribute-level help for that field to see implementation examples."
3) stick with "Always..." for now if you're using our auto-dml process(es)
regards,
raj

Cost tracking and Reporting tools

Hi,
is it possible to track Project cost directly or only on ressource bases.
What I mean excatlly is, can I assign to different Project Member a per day salary or per Hour ?
Or can I only see how many man-days ar assigned to the Project ?
Also I'm interested in Reporting possibilities. Can I use more than the TC SOLAR_EVAL.
Are the other queries ?
Thanks in advance
Guersel

Hi,
Yes, You can see only how many man-days are assigned to the Project.
It is not possible to report project cost directly.
However, You can assign a different project team member to a different project
(but per a day salary or hour).
Regards,
Sanjai

Track and pay the logistics partner

not too sure if this post should belong to this forum.
we have logistics partners who help us to deliver stock to customer and charges us on the delivery.
Currently, when they bill us, they will give us a list of stocks that they have shipped.
our job is:
1) verify the list of stocks are correct, not bill wrongly, etc. (majority of the verification based on the sales order transaction, we capture all sales in OM.)
2) raise PR to pay for the service.
any modules/features in EBS that help us on this?

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Is there any default calendar which I can use on my form and report

Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohan

hi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah

Tracking and maintaining data about modifications done to Standard SAP code

Hi All,
I need your help to know if there is a way to track and maintain the modification changes done to standard SAP code. I have gone through SE95 but not much help. Is there any DB tables which stores these information after a standard SAP code has been modified like for example when the core Mod was done, transport number for the MOD, object in which the MOD was done, version of the object etc.
Thanks in advance.

Hi,
Try the following tables.
SMODILOG & VRSD.
Regards
Kiran Sure

OAS 10 to Fusion 11 - Forms and Reports Integration

We have an existing forms and reports application developed in version 10. The database is now 11 and we are getting ready to install Fusion with the portal, forms, reports and discoverer version (11.1.1.4). Although we feel that our future install should go OK, we'd appreciate any suggestions, tips, tricks, etc. The clients are Win XP and the database is on a UNIX server.
More important than the install would be comments on the coversion of version 10 forms and reports into Fusion. I expect that the conversion process is not 100% meaning that one cannot install Fusion and have existing version 10 forms and reports properly run without modifications. What is involved in the conversion of forms and reports? What changes did you have to make to have your old version 10 forms application run in Fusion?
I am new to developing in Oracle but am quite familiar with the MVC design pattern so the new development environment should be fine for new work, but the issue here is the older version 10 forms that clearly do not subscribe to the MVC design pattern.
I am looking for your experiences and insight from those who have performed this conversion.
Steve

Well, I believe you can upgrade to 11g and then compile all the forms using frmcmp..
The following links could be of your interest:
http://download.oracle.com/docs/cd/E17904_01/web.1111/e10240/upgrade.htm#FSDEP396
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10394/migtool.htm#FSMFA110
http://download.oracle.com/docs/cd/E17904_01/bi.1111/b32121/pbr_upgrade002.htm#RSPUB77156
http://download.oracle.com/docs/cd/E17904_01/upgrade.1111/e10130/summary.htm#FUPCL103

View Customization Table changes and Data table base changes in a report

Hi All,
How to view Customization Table changes and DAta table base changes in a report ,
Is it right transactions: SCU3 or RSVTPROT
Also plz let me know the concept of audit trial,
Thanks
SD

Hi,
Changes to master data objects must be captured for the For compliance purposes. The auditor allows you to be able to view and print an audit log of changes to master data objects for a chosen period. It is very common for external auditors to focus on what has changed from one year or quarter to the next to help determine the nature, extent, and population for testing. To configure and access your audit log, perform the actions listed with each of the following utilities.
Audit Trail is used to track the record changes.
The report RPUAUD00 gives all the changes done to the masterdata by any user anytime.
But, before using this audit trial, please ensure that the system hardware is well equipped as the audit trials activation would later become a performance issue as this would occupy a lot of space in the coming time.
Best Regards,
Venkat.

Report for abserving changes made to the customer master and moniter

Report for abserving changes made to the customer master and moniter and detail
Please send with t. code.

Hi Dhari,
Well the requirement seems very simple but its not as simple as it looks.
i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
1. pick up an cube that builds on emp transaction data.
2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
4. create a info object say indicator and add it to the cube
5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
4.now build one more cube for holding the changed records from this cube and call it say zhrchange
5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
hope this helps.

How to track and find changes in StyledDocument

Hello everybody!
My name's yoni. I'm new to the forum, but consider myself an intermediate level programmer.
To the matter at hand- I have a document which extends DefaultStyledDocument. I'm trying to implement syntax highlighting for the document (which works, BTW), but my problem is this:
How do I track each and every change (i.e. every char inserted or removed, etc) and more importantly- tell where it happened in the document?
I tried using fireInsertUpdate, fireRemoveUpdate as bases, but they only fire from my document when I press ENTER in editor.
I tried fireChangedUpdate, but it wouldn't fire on every typing, but only when the former 2 fires went up.
Finally I thought of using fireUndoableEditUpdate, which I found DOES fire each and every time I change the smallest thing in the document, but I can't seem to be able to find WHERE in the document this happens.
The bit of code which TRIES to do this is:
protected void fireUndoableEditUpdate(UndoableEditEvent uee)
if(tokenMarker != null) {
javax.swing.undo.UndoableEdit ue = uee.getEdit();
if (ue != null)
if (ue instanceof AbstractDocument.DefaultDocumentEvent)
DocumentEvent dde = (DocumentEvent) ue;
DocumentEvent.ElementChange ch = dde.getChange(getDefaultRootElement());
if(ch != null) { /*************/
tokenizeLines(ch.getIndex() , 1); //tokenizing
markLineStyles(ch.getIndex() + 1); // changing attributes of document 4 syntax highlighting
super.fireUndoableEditUpdate(uee);
What happens is everything works as I expect, except EVERY TIME ch == null for some reason unknown to me.
Any ideas will be appreciated.
Thanks, yoni

I'm not sure I understand exactly what you are asking for so here are a couple of suggestions:
a) undo/redo is supported automatically. See this section from the Swing tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html
b) insertString()/remove() methods of the Document are called whenever changes are made to the Document (see above link)
c) add a DocumentListener to the Document to listen for changes:
http://java.sun.com/docs/books/tutorial/uiswing/events/documentlistener.html

Changing language in forms and reports

Is there any tool Available in oracle 9i forms and reports to change the language
(suppose need a change from english to arabic)?

This is not the correct forum form from related queries. Please raise your question in appropriate forum.
--Mukul

How to change the Forms and Reports's NLS_LANG character set on OAS

Hi,
I'm having problems with the OAS10g's actual character set, when displaying a report made with Reports Builder 10g who has the letter "ñ" it displays "ñ " with a blank space at the final so i need to change this character set for one that suits this requirement.
which file or files should i change ??
could this change affect something else, for example another product in my OAS ??
Regards
Carlos

I have this Forms and Reports Application in Brazilian Potuguese. What I do at new installations is:
1. Open this file: <MiddlewareOracleHome>/forms/server/default.env and add the NLS parameters below the FORMS_PATH definition:
FORMS_PATH=D:\Oracle\home207middle\forms;D:\MYENV\Exe;D:\MYENV\Imagens
NLS_LANG=BRAZILIAN PORTUGUESE_BRAZIL.WE8MSWIN1252
NLS_NUMERIC_CHARACTERS=,.2. Open this file: <MiddlewareOracleHome>/reports/conf/<your_report_server_name>.conf and create an "environment" section with the NLS variables:
   <environment id="MYENV">
      <envVariable name="REPORTS_PATH" value="D:\MYENV\Exe;D:\MYENV\Imagens"/>
      <envVariable name="NLS_LANG" value="BRAZILIAN PORTUGUESE_BRAZIL.WE8MSWIN1252"/>
      <envVariable name="NLS_DATE_FORMAT" value="DD/MM/YYYY"/>
      <envVariable name="NLS_NUMERIC_CHARACTERS" value=",."/>
   </environment>For this one to work, the application must set RP2RROREPORTSENV=MYENV before launching the report.

Tracking calls to Forms and Reports in an application - Migration

Hello,
This is an interesting case. I have an application that has a number of Forms and reports written for 6i. Before I start migrating to 10g, I want to have an estimate of the current usage for this app (for one month), namely the number of times users accessed the forms and the reports.
For example:
Form A accessed 675 times
Form B accessed 30 times
Form M accessed 0 times
etc..
sames things for the reports.
Based on this statistics, I can say which ones should be migrated first, etc...
Now, I was thinking about creating a table called USAGE and each time a user clicks on the menu that calls a Form or a report, I will update the corresponding record in USAGE.
The problem here is that users can access a report or form from within other forms and as such the info I get from the Menu will be only a rough estimate. I need to point out that I don't want to open ALL the forms and check whether there are other calls from there.
What do you think of this approach and if someone was faced with the same issue, what would be the best bet to get the usage estimate.
Note: The app is used quite heavily.
Thanks

That's one possibility but the thing is that I don't want to open ALL the fmbs and then add that piece of code.
That's why I want to just work on the Menu and try gather statistics from there. However, that will give me only a rough estimate.
I was looking at Oracle Trace and I am checking whether I can get the required info (Forms and reports names) from this log for a client/server Forms app. However, I would prefer to see whether someone already had experimented with this.
Thanks.

Track and report DB & os changes

Similar Messages

Maybe you are looking for