Track Contract number from CITT (PR for Open Contract)

Dear Gurrus,
I raised a PR for open contract. Our procurement department do all things (Bidding , Tech / Financial evaluation etc.)
They are authorized to select 01 vendor & made open contract against vendor.
How do we track Contract number against PR.

Hi,
i am solving the same issue but i am not able to obtain any value in parameter BLN. I try to make standard substitution in GGB1 and i would replace some value in reversing from reversed document.
My substitution exit is like:
FORM u302 CHANGING bseg-bewar.
DATA: i_belnr_orig TYPE bseg-belnr.
CLEAR i_belnr_orig.
GET PARAMETER ID 'BLN' FIELD i_belnr_orig.
SELECT SINGLE bewar INTO bseg-bewar FROM bseg
WHERE bukrs = bseg-bukrs
AND belnr = i_belnr_orig
AND gjahr = bseg-gjahr
AND buzei = bseg-buzei.
ENDFORM. "U302
THANKS

Similar Messages

HT1495 I am using imessage on my phone but i dont want them to appear on my ipad how do i remove the number from my ipad for messages

Hi i am using an iphone with imessage but I dont want to use that number on my ipad for imessage or facetime can I change this ??

Use a free gmail.com address on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htmhttp://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.htmlhttp://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetimehttp://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.htmlhttp://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.htmlhttp://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-textinghttp://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/http://www.apple.com/support/systemstatus/
 Cheers, Tom

How do i remove my phone number from my mac for iMessage?

I have a macbook air and whenever i try messaging my daughter's phone who has an iphone 5, it ends up in coming back to my mac. So that means my mac is using her phone number as imessage. I tried removing it but i cannot find the setting to do so. PLEASE HELP. i want to remove her phone number from my mac as an imessage setting.

Open the Messages app on your Mac. Choose Preferences from under Messages in the menu bar. Then choose the "Accounts" tab. All the settings are there.

HT201472 Why won't Apple protect a registered product (by serial number) from being useable for future service when stolen?

I am trying to understand why Apple doesn't check it's vast databases to check if a product that someone is trying to load with a new APP, Software, or Register in any way when that product was registered to another user and lost or stolen. I have a password on my iPad and iCould service which I locked and put in the device lost mode (but the iPad was not online wifi version).
I would like to be able to report it as lost/stolen and have Apple watch out for anyone trying to use it. Seem pretty simple and I am not asking Apple to follow up with anything more than a quick message (device is lost - please call or contact XYZ; this product will not be activated by Apple unless proof is provided that you are the rightful owenr) to the device if it ever tries to connect to Apple.
Any other ideas???

I would like to be able to report it as lost/stolen and have Apple watch out for anyone trying to use it.
They won't. Apple does not track lost or stolen property. You can comment on the issue to Apple via their feedback pages, if you wish:
http://www.apple.com/feedback
but as of this time this is not something Apple does nor have they given any indication that they will do so. The problem is that any user could fraudulently report a product as stolen even if it was legimately given away or sold. Apple has no way of verifying who is indeed the legal owner of a product. That's why they won't talk to anyone in matters of stolen property other than authorized law enforcement.
I am not asking Apple to follow up with anything more than a quick message (device is lost - please call or contact XYZ; this product will not be activated by Apple unless proof is provided that you are the rightful owenr) to the device if it ever tries to connect to Apple.
Activation Lock and Lost Mode in iOS 7 do this now, requiring your Apple ID and password to activate the device. So I'm not sure what more you expect. But again, you can comment to Apple via the feedback pages.
Regards.

Extracting number from text files for variable

Hello again,
I have several different types of text files all with the line
# NPTS=32768 DT=0.005
somewhere in the file. The numerical values are different for each file and I need to pull them out to assign as a variable for a program I am running.
How can I search a file and pull out each of these two numbers?
Thank you

Procyon's sed script assumes that the NPTS number and the DT number will both always have a period in them. In the original, the NPTS number doesn't have a period, and I don't know whether the DT number may lack a period.
You could try this instead (replacing the 's~....~p' part of Procyon's script):
's~# NPTS=$[0-9.]*$ *DT=$[0-9.]*$~\1,\2~p'
That may let in stuff you want to exclude, for instance, it would let in:
NPTS=0.0.0.0.0 DT=1.1.1.1.1
and:
NPTS=....... DT=
and so on. But it's a tradeoff: if you know your data doesn't include anything like that, you can go with a simpler sed script. If you need to be fussier about what you're matching, then your sed script will need to be more complex.
EDIT: What I said in first paragraph is wrong. I overlooked the '*' after the '\.' in Procyon's script. What he's got will permit but not require a period. My final point still applies, though, to both of our suggestions. His script and my script would both match the second of my bad cases.
Last edited by Profjim (2008-09-17 21:31:34)

Is there any way to add a credit card number from the iPhone for the app store

Is there any way to add a credit card to my account from my phone my computer has crashed and I can't update any of my apps

I don't believe so. I will have a closer look though and report back

Want to Track PO number from AUC settlement document in KO88

Hi,
I am settling AUC to CWIP in KO88.
Accounting document is created. I want to find the PO document. How can I track the PO document linked to this AUC.
Please advice.

Can you try the List of Origin Reports by cost elements S_ALR_87012060? The report has drill down capability to show the WBS linked to the asset.

SQL to fetch contract number for a sales order

Hello,
I am using API's to create service contracts, all is working well except one scenario - when install based item switches ownership.
I need some help crafting a query that will return the contract number, if one exists, for a particular sales order. I am trying to determine if a contract already exists so I can either create new contract header then add lines.... or add lines to existing.
I have this query so far, however it will return the prior/old service contract and not the most recent if an IB item is being resold after refurbish:
SELECT okh.id
FROM okc_k_headers_b okh
,okc_k_lines_b okl
,okc_k_items oki
,csi_item_instances cii
,oe_order_lines_all oolv
,oe_order_headers_all oohv
WHERE okh.id=okl.dnz_chr_id
AND oki.cle_id = okl.id
AND okh.sts_code <> 'TERMINATED'
AND to_char(cii.instance_id) = oki.object1_id1
AND oolv.line_id=cii.last_oe_order_line_id
AND oohv.header_id=oolv.header_id
AND okl.end_date >= trunc(sysdate)+vDuration
AND oohv.order_number=vOrderNumber
Thanks!
Any help would be great.

I found similar question here:
Relation between Order Number & Contract Number
But that query does not return contract number consistently for me. Meaning I know a contract exists related to a certain sales order yet query does not find it.
I am new to contracts I appologise for my ignorance
thanks
Edited by: user7513372 on Jul 6, 2010 11:23 AM

FBRA - Clearing cannot be reversed (contract number) Message no. F5538

Dear
In T.code F-51-- transfer posting with clearing-- user has posted the document by giving posting key 27 and vendor code, amount and later in line item 2 by giving posting key 39, vendor code spl gl indicator (for further security deposit), amount and profit center and by mistake filled contract number and contract type.
In t.code F-51, since in line item 002 the fields contract number and contract type are filled by mistake the same could not be removed even in FB02 as they are greyed out.
Later the above spl gl credit was paid by t.code F-53 by selecting the above open item, process open item, and cheque is not yet issued. Now he would like to reverse the document.
Now when the same is tried in t.code FBRA the following error is coming.
"Clearing cannot be reversed (contract number) Message no. F5538"
If contract number and contract type are not filled there is no error at all and the document can be reset and cleared.
We are in ECC 6.00. I just verified the note number 31547 but it is issued on 29.07.1998. Our basis team also said the same thing.
Your valuable inputs are highly solicited.
Regds

Dear
F-53 document has got a clearing document. Hence I cannot directly use F-08 here. So I have to use FBRA only
Requirement is :
Delete the contents at the line item level in the field labels Contract Number and Contract Type viz., BSEG-VERTN, BSEG-VERTT fields. (ex., in T.Code F-51 --in posting key 39 contract number and contract type are filled by mistake by user and they need to be deleted after posting the document)
The above fields have been included in SPRO>Financial Accounting (New)>Financial Accounting Global Settings (New)>Document>Rules for Changing Docuements-->Document Change rules, Line item after posting the document.
But even then I could not delete the contents in the above fields in FB02
Please throw some light as to where I am missing still ?
Regds
Through coding the relevant fields were deleted as per reply received from sap.
Edited by: aravindpc on Jan 14, 2011 4:47 PM
Edited by: aravindpc on May 14, 2011 12:18 PM
Edited by: aravindpc on May 14, 2011 12:21 PM

How to create release order for value contract?

dear experters,
I create a value contract by T-code:va41, order type"WK1".I set a Assortment module to this order and mateirl "WKM1" to it.
then I create release order by T-code:va01 with refrence to this value contract,but it set the material "WKM1" to the sales order, and I can't modify this material! I want to put another material which belong to the assortment module in the value contract. I want to know how.
thanks.
Best regards
lance

Assortment Module for Value Contracts
This function enables you to define a list of materials that can be released from a value contract. Materials can be assigned to more than one assortment module.
An assortment module is an entry tool and can be called up from the value contract. It is valid for a certain time period.
If you delete a material from the assortment module, to which a value contract refers, you will be unable to release that material.
In the value contract, only materials with the same sales organization and distribution channel as the value contract can be taken from the assortment module. All the other materials in the assortment module are not displayed in the value contract.
To fulfill both these requirements, two types of value contracts are offered in the standard system:
Value contract type WK 1
You can specify a product hierarchy or a assortment module for value contracts with contract type WK 1. The system will always propose this type of contract, if you want to create a contract for several materials or a certain group of materials. All the materials in the relevant assortment, or belonging to the specified product hierarchy are then relevant for release.
Value contract type WK 2 (material-related)
You can create contracts for one material (usually configurable) with this type of value contract. A software company is an example of where this kind of contract is often used. There, a contract for the value of $500,000 is made with the customer for one specific software product.
You can also agree on the length of the contract for this type. The contract duration can be agreed at item level and can be different from the contract duration specified at header level.
You can store special price agreements for the value contract. These price agreements can then be used at any level. For example, a value contract can contain prices for individual materials, or discounts that are valid for every released material.
Release Orders
The customer fulfills a contract by issuing orders against the contract. The contract does not contain any exact dates for deliveries, so you need to create a sales order to release against a value contract.
When a release order is created for the contract, the system automatically updates the released values in the contract. The release order value is calculated from the total of the open order and delivery values, plus the value that has already been billed to the value contract.
The system also updates the released value for subsequent changes (for example, overdelivery of contract release, price changes in the billing document, partial deliveries, returns, rejection of order items, cancellation or reversal of orders, deliveries or billing documents).
You can create a release order in any currency. The system automatically converts this currency into the one agreed upon in the value contract on the pricing date for the contract release order.
Creating Assortment Modules for Value Contracts
Procedure
To create an assortment module, proceed as follows:
1. From the initial screen choose Logistics >Sales and Distribution >Master data.
2.Choose Products >Value contract - Assortment module > Create.
You will then be in the Create assortment module: Initial Screen.
Module type 6 is defined for the value contract.
3. For external number assignment, enter a module number.
You can then use existing modules as a reference by entering the name of the module under reference.
4. Choose Enter.
5. Enter a short description for the module.
6. Enter a validity period for the product proposal.
During a release, the system checks if the release date lies within the validity period.
7. Create the materials that you wish to assign as items to a module.
You can display a list of materials as a product proposal, which you can then copy into the assortment module. To do this, choose Suggest material, enter the selection criteria in the subsequent screen and copy the selected materials to the items. Use Edit > Delete item to delete the materials that you do not want to copy to the assortment module.
8.Save your entries.
Also Please check the copy control in VTAA
Regards,
Anbu

With a contract number, how to know the total PO release value against it?

Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!

hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract   Type Vendor     Name                                 PGp Agmt. date
Item Material           Short text                               Mat. group
D I A Plnt SLoc                 Targ.qty. Un       Net price Curr.   per Un
4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val.        1,000,000.00 USD   Open          1,000,000.00 USD   100.00 %
00001                    Inspection Svcs, Construction            R3VNI
L   U                                  0 UL            0.00 USD       1 EA
00002                    Chief Inspector                          R3VNI
L   U                                  0 DAY         390.00 USD       1 DAY

How to get the contract number selected on VA01.

Hello Experts,
While creating a sales order a contract number is selected.
ie to which contract this SO is being created.
We get a ALV list with list of contract number and we select one.
But no where this contract number is displayed.
I have a placed a input/output box on additional tab header leve of VA01.
I need to display the contract number selected by the user for that sales order on to that box.
and this should happened the moment the user copies the contract number from the ALV list
any functon exit or badi's which could be used to get the value.
right now iam using the include MV45AFZZ
I know the table getting used.
Thanks in advance.
Regards,
Ranjith

You can put your code into the MOVE_FIELD_TO_VBAP userexit in include MV45AFZZ. The contract information is stored on item level (VBAP) in fields WKTNR (contract number) and WKTPS (contract item). If you can have more than one contract in a sales order you should display that information on item level rather than header level, if you always reference one contract only per sales order header should be fine.
Hope that helps,
Michael

Tables for Purchase contract Tax pricing

Hi ,
     I want to display purchase contract detail in the standard layout.
For Displaying pricing we need the Document condition number of the contract.
Normally in Purchase order pricing document number is in EKKO table and field name is KNUMV.
In same procedure i search for Contract pricing but am not able to find the pricing document number table and the pricing table.
Please guide me how can we pick the pricing values from purchase contract.
what is the tables for purchase contract Tax pricing ?
Regards,
Madhan - Chennai .

hii,
     it is
               KONH                                    Conditions header
                KONP                                    Conditions items
                KONV                                    Procedure ( billing doc or sales order)
                KOND
                      VEDA                                     Contract data
regards,
Shweta

Service Entry sheet creation - Using a diffent contract diff from line item

Hi,
Here is the scenario...
I have a services purchase order referring to contract and its service item with services ( service masters) attached to it.
And the PO item is a limit item with some limits maintained on the limits tab, but contract reference is specified at the limits level it is only at the line item level.
System version : ECC 6.0
Lets say PO number : 123456789
Lets say contract number and item is : 2323232323 item 10 ( Account assignment U )
My supplier is : 111111111
Now I am creating the Service Entry sheet and I am trying to add the services ( services selection button) I get a pop up to search for services by certain selection criteria and one of them is purch document ( remember it doesn't pre-populate and grey out the purch doc field with that the contract number from the item level) and now I can select any service contract that belongs to any supplier and select the services from it and complete my SES.
So lets say the contract from which I chose the service is : 3232323232
And the supplier on the contract is 2222222222
Is this a valid scenario or not?
Has any body ran into this situation before?
Hope I was clear in explaining my scenario....
Thx,
Krishna.

Hi Krishna,
the External Services Management distinguishes between planned and unplanned services.
In case you have ONLY limits, no planned services in the PO item, it does not matter if you have entered a contract number into the PO item - in this case this contract will be not a real reference for your services.
If you have entered limit values only as overalllimit and expected value and you did not enter a contract limit on the contract limit tab, then you will not have a special contract reference on unplanned level neither.
In this case it is NOT an error when you start the entry sheet creation and you can select services from other contracts or purchase orders against your limit values in the PO into the entry sheet. The system does NOT check for a different vendor when you select services from other documents than the contract which you have specified in your PO item, because it is NOT a real reference - nor on services level as you have only limits in your PO item, nor on limit level since you have NOT entered a contract limit into your PO item.
In order to understand this process please study the unplanned scenario and contract reference scenarios.
Regards,
Edit

Open contract - remaining quantity report?

Hello,
I need to find a report which will show open contract quantity. T-code: VA45, VA46 has no such data. There are only information about open contracts, but I can not find data about remaining contract quantity.
Do you know any t-code or program?
Best regards,
Maciej K.

Hi,
It looks there is no standard report that can show the open contract quantity.
In our business, we developed an ABAP query and I used logical database table VAV.
Couple of Z-fields were introduced to find the total release quantity (for quantity contract) and total released value (for value contract).
To find the total released value a function module CALL FUNCTION 'SD_READ_CALL_OFF_VALUE' was used. To find the released quantity, a query was used to fetch information from VBFA table like below;
SELECT SINGLE SUM( rfmng )
INTO ZRELEASEDQUANTITY
FROM vbfa
WHERE vbelv = vbak-vbeln
AND posnv = vbap-posnr
AND vbtyp_n = 'C'.
If the above two values are known, then you can subtract these fields from target quantity (VBAP-ZMENG) and target value (VBAP-ZWERT) fields to find the open quanity and value details.
Regards

Track Contract number from CITT (PR for Open Contract)

Similar Messages

Maybe you are looking for