Data services unavailable using just wi-fi

I ve got my first bb just a few months ago and I ve got some problems when trying to access any msg using just a wi-fi connection while I am at my work. I live in Venezuela but I work on a vessel offshore in Angola.
At home everything on my bb works fine , I can manually switch off the mobile network and I still can have access to all the messengers using just my home wi-fi connection.
On the vessel I can not get any mobile coverage but we have a wi-fi network connection, now when using this wi-fi network only the browser works. Every time I try to log in into any messenger I get this message " Data services unavailable".
Here in Angola the blackberry services are not available yet with any provider so I wonder if this could be the reason, even though I am using just a wi-fi connection.?
Thanks in advance

Just to clarify...
I am located in Toronto and our carriers here
a) Always make you sign up for some sort of BB package with the activation of a new handset (i.e. free or discounted prices on 3-year contracts)
b) Canadian carriers also offer two to three types of packages: Data OR Email/IM OR Social Packages which gives you access to Facebook, My Space, and other similar applications.

Similar Messages

How to setup Data services to use existing zend application

The application I'm working on is going to have views created both in Flex and in PHP. Thus, we want to setup the Zend framework so that it can be used for the PHP part of the application and to display views in the browser. We want to setup the AMF gateway so that it's a service provided through a controller in Zend and with the actual service classes hidden from public view in the application folder, and not like the default now seems to assume that you create a folder in your public webroot where the endpoint and all service classes live.
So the structure we are after is
Zend_AMF endpoint at http://example.com/services/amf
Zend folder structure:
application/controllers/ServiceController.php    // the controller that handles all incoming requests, so acts as the gateway.phpI assume
application/services/amf/    // contains the actual service classes, e.g. Users.php, Products.php
public/swf/    // will contain the actual .swf files for the Flex application
the /public/ folder is set to the webroot with /application/ outside the webroot as per the Zend framework recommendations.
I would like to use the Data service introspection to generate the Flex code for the services, however the introspection afaik requires the services to be in the /public/ folder or a subfolder there. So how can I make introspection work for a service that lives in /application/services/amf and is accessed through http://example.com/services/amf ?
Suggestions? links to tutorials?

Yes, well hopefully this will be supported in the future. In the mean time, I've noticed that it's only actually when creating the service and the API for it that you need to have the class inside the web root. In order to configure the return types and input types you don't need to go through the standard gateway.php anymore. So, although not ideal, here's how I do it right now:
1. I have set up m zend framework as described in my first post, with my AMF service gateway being a Zend controller and not the gateway.php
2. I create the service class with the API I need inside the application/services/amf folder. If the service needs to connect to the database then I create a Zend Db Model using the zf command line tool (as per Zend framework practices) and then hook my service class to use that. Which basically means that my service classes are very slim and simple.
3. When I created the Flex project I created a dummy service using the sample php, which has set up Flash builder with the default gateway and so on
4. Once I've created my service class, I copy the file to the default location where Flash Builder wants to create my services. I then strip out any implementing code from the copied file, leaving only the public API and empty methods.
5. I then create a new service in Flash builder, point it to the stubb class in the default location and let the introspection discover the public api. This will of course mean that all input values and return values are generic objects.
6. After this is done I delete the stubb class. In the created AS service class I override the service endpoint so that it points to my real gateway controller within the zend framework.
7. After this is done I can configure the return types and input types using auto discovering. It will connect to the real gateway and ignore the default gateway and thus I can develop against the real endpoint and don't need to create my service classes within the public location of the Zend folder structure.
It's a bit of a workaround for sure, but since I don't create new services that often and I can have Flash builder update my return types etc. automatically this way, I figure it's worth the extra steps. Still, I would hope that in the future Flash builder will support having the introspection happen on a location outside the projects own web root.

ERROR [BF00] while using Test Data Service

Hi,
I am new to VC. I am using SAP Netweaver Visual Composer, Client version 700.14.0.1.
When i test a Data Service "BAPI_BANK_GETDETAIL" using the following values:
Bankcountry: US
Bankkey: 12345678 or 021000089
It doesn't retrieve values. it says
ERROR[BF00]:
Bank US 12345678 doesn't exist.
Please help me!
Regards

Fabien,
I was getting that error becoz u201CIDES systemu201D which is used for training purposes with some sample data, is not installed.
Can you advise me what to learn and from where? I mean, can you refer some website or book.

How do you expose PL/SQL Webpages via REST Data Services?

I am in a bit of a pickle. I have a 3rd party vendor which wants to send data back us. They do it via a standard http form post to a webservice (actually with normal html form inputs) that we have to implement. I have this done in the form of a PL/SQL package. Now the hard part.....before we decommissioned our Oracle HTTP server and went to using REST Data Services, we could just reference the schema and procedure name via the DAD. We no longer have a web tier environment at our disposal, just Weblogic Servers and REST Data Services plus the database running APEX. Is there any way that I can build/publish an end point that can receive normal post transactions (they do not and will not communicate with us using SOAP, REST, or XML). What I am basically needing is to get my PL/SQL out there where it can work as an old fashion form processor taking the POST/GET parameters and then processing them. Is there any way to do this with REST Data Services or APEX?

Try changing:
UPDATE exav.problems
SET active_with = null
WHERE active_with='''|| user_id ||''';
to:
UPDATE exav.problems
SET active_with = null
WHERE active_with = user_id;
You only need to add the quotes if you are building a string to be executed dynamically, like:
EXECUTE IMMEDIATE
'UPDATE exav.problems
SET active_with = null
WHERE active_with='''|| user_id ||'''';

Help me about LiveCycle Data Services

Hi all,
   I use Flex 3 and BlazeDS server to write my web app. Today, I want use LiveCycle Data Services ES. I have done some steps bellow and I need some guides continue from anyone.
   1. Download the LiveCycle Data Services ES from adobe home page (ok).
   2. Install it with option is include Tomcat (ok).
   ... what step continue..?
   My project was created with BlazeDS server, and I need place inside LiveCycle Data Services ES that just installed ? Or I must re-create my project with LiveCycle Data Services ES ?
   Please guide to me some necessary steps to use LiveCycle Data Services.
   Thanks very much.

Which file exactly from the lcds samples? I can't find this file in the livedocs nor in the source of the samples.

What is data services?

I see this in my options, "Data Services: On." What are data services? Do I need it on all the time? Does it waste battery?
Owner of the BlackBerry Pearl Flip 8220

libbyburgess wrote:
I can't download some apps like facebook or msn because it says: 'data services unavailable'.
I'm new to all of this so I'm not sure what to do?
Hi and Welcome to the Forums!
To use the proprietary BB/RIM services, you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you will then have access to whatever level of services you subscribe to from your carrier.
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Exposure of BI Content/Generic DataSources in Data Services XI 3.x

We were told by SAP Business Objects personnel back in May 2009 that SAP DataSources (standard content and generic) would be exposed in SAP Business Objects Data Services XI 3.2. We have recently upgraded Data Services, in a sandbox environment, to XI 3.2 and found that this isn't there.
After pinging some others that we know at SAP, we're now hearing that this won't be available until SP4. Is this correct? Right now, the unrestricted shipment version is SP0 and we're wondering if it truly is SP4 or SP0 FP4 when then is scheduled to be in unrestricted shipment and when these are scheduled to be released for general customer consumption. Can anyone from SAP monitoring this forum comment?

Hi Dennis:
BW uses the business content extractors. In 4.0 Data Services will also use the Business Content extractors.
This does not mean BW customers have to start using Data Services; SAP is not replacing the connectivity between ECC and BW. Data Services is added as an option to the landscape and adds the option of accessing other 3rd party sources u2013 one single tool to extract data.
With Data Services, you have the possibility to consolidate extraction rules into one platform. You can also make sure you can load correct and clean data into target application with the data quality components of Data Services.
You just need to know the name of the extractor and connect. No ABAP programs are generated, making it easier to deploy and maintain.
Since you originally posted your question almost two years ago you might be aware of this but I think people visiting this forum in the future may find very useful information on the blog by Tammy Powlas.
SAP BusinessObjects Data Services - What is new in 4.0?
/people/tammy.powlas3/blog/2011/04/18/sap-businessobjects-data-services--what-is-new-in-40
Regards,
Francisco Milán.
Edited by: Francisco Milan on May 24, 2011 4:12 PM

Assign Task - Prepare Data Service not being called?

Hi,
I've got an Assign Task activity, with an Action Profile that defines a Prepare Data Service. For the Prepare data service, I've just created a simple process, and I'm recording it.
When the assign task gets invoked, the Prepare Data Service process is not being executed. Nothing gets recorded.
Do I need to do something else?
I am running LC ES2 SP2
Note - If I use a Prepare Data Process on a Task Manager start point, it works fine. It's just not working for an Assign Task activity.
Thanks

Hi
By default, the checkbox to run the Prepare Data on the User service step is turned off.
Navigate to the Presentation & Data tab on the User service.
If you have selected an Action Profile that specifies a Prepare Data process, you'll see 3 checkboxes under the section: Specify when the Prepare Data process runs
Check "The user opens the task" and it will now run the Prepare Data on the User service.
Note: This is unchecked by default so that any data entered on the startpoint step is not overwritten at the user step.
It is up to the process designer to save off any data that you do not want overridden when the Prepare Data loads.
Diana

Problems with logical data service

This is related to thread 837141 (Problems creating physical data service to relational table)
I have been able to create the logical data service that uses the physical service (mentioned above).
However when I try to create a library function to update (shown below)
declare function lper:update($new as element(per:Persistance2)) as xs:boolean {*
* let $changed :=*
* for $n in $new*
* let $old := lper:read($new/Project, $ew/Property)*
* return*
* fn-bea:replace-value(fn-bea:changed-element($old), "Value", $n/Value)*
_let $return := {color:#ff0000}pper:update{color}($changed)_*
* return fn:true()*
WorkSpace Studio gives the following error (for the line underlined above, and the function in red)
*{bea-err}FUNC002: Illegal use of side-effect procedure {ld:Physical/Persistance2}update with arity 1. Side-effect procedures cannot be invoked from a side-effect free context*
Any idea why?

functions, by definition, do not have side-effects. So calling something that had a side-effect (procedure) is not allowed.
You need to create a library procedure.
Your
declare function lper:update($new as element(per:Persistance2)) as xs:boolean {*
needs to be
declare procedure lper:update($new as element(per:Persistance2)) as xs:boolean {*
- mike
Edited by: mikereiche on Dec 12, 2008 5:10 PM

Logical Data Service

Hi all,
I´m trying to create a phsysical data service that uses two physical data services (one Store procuredure and one table).
I what two create a join clause between my strore procedure and my table, but i got this error message:
+"cannot create relationship from/to any Data service other than entity data service.+
+One or both of the data services chosen are not and entity Data SErvice"+
What I need to do is:
I have A AND B values as input to my logical data service.
I need to use A and B value to get another value C in my physical data service( type: Relational Table).
C will be physical data service (type Store Procedure) input data. The return of this procedure will be mapped in (XSD) file that represents my entity.
Does anybody can help me?

If I understand correctly, your need to satisfy conditions on parameters A and B with your table, so you can extract C as a result from the table and use it as a parameter in your stored procedure to return the result of the stored procedure.
In XQuery this kind of join looks loosely like this:
for $t in ns1:TABLE()
where $t/column1 eq $A
where $t/column2 eq $B
return
for $s in ns2:STOREDPROC($t/C)
return
<myresulttype>
<field1>{fn:data($s/column1)}</field1>
</myresulttype>
The error message you have indicates that you are trying to create a relationship function. While it is possible to express joins through relationships, you can also do joins using the Query Map editor.
The chapter "[Create Your First Data Services|http://download.oracle.com/docs/cd/E13162_01/odsi/docs10gr3/datasrvc/Create%20Your%20First%20Data%20Services.html#CreateYourFirstDataServices-CreatingaLogicalDataService]" describes how to create a join graphically using the Query Map. The only difference in your case is that you would map your join line (Explained in "Setting up a Join Condition" in the docs) would be mapped to the parameter of the stored procedure.
Edited by: alexkotopoulis on Jan 16, 2009 1:56 PM
Edited by: alexkotopoulis on Jan 16, 2009 1:57 PM

Tunneling failed in Data Service 2.5.1

We created a set of application which all use Data Services
RTMP using port 2038. In the services-config.xml we set up in the
my-rtmp channel definition to use rtmpt as the protocol. All
applications are compiled with this service-config.xml.
For most users it is working fine, however for some of our
corporate user, behind restrictive firewalls, a connection to the
data services can not be made. The application throws a generic
send failed message.
Since we are using the rtmpt protocol, what can we do to make
sure our corporate users are able to use our applications?
Thanks,
-Rogier

It seemed the problem was fixed. However, as we set rtmpt as
the only channel, our other users were experiencing a big drop off
in performance due to the tunneling.
I read a very good blog entry:
http://www.infoaccelerator.net/blog/post.cfm/setting-up-rtmpt-failover-on-lcds
where Andrew talks about using rtmpt as failover for those
users that cannot use rtmp.
We implemented the structure he described:
- channel definition for rtmp in services-config.xml
- channel definition for rtmpt in services-config.xml
- channel definition for polling-amf in services-config.xml
- define both channels as default channels in
data-management-config.xml in the order rtmp, rtmpt, polling-amf
Everybody was able to use the data services..

Not able to login to Gtalk - Error messgae: Data Services unavailable

Model: 9860
OS: 7.1.0
Gtalk: 3.0.0.23
Active connection during issue: Wi-fi
Mobile Service: Vodafone
When ever I try to login, I get this error message: Data Services Unavailable. All the time i try to login, I am active on wi-fi connection. Please help on following:
1. Is there a way to make wi-fi connection as primary/default internet access point and not data/3G services
2. How to make gtalk work on wifi connection without data/3g plan.

Now that I have data plans activated, Gtalk is working.. it would have been good to have some IM apps work with WiFi connectivity...

Error message using print set-up utility" server-error-service-unavailable"

while trying to use my printertoday, an error message came up" server-error-service-unavailable". i cannot add the printer in the printer set-up. it is showwing up, so i know that the usb connector is working. has anyone ever encountered this before?

Hi aychekay
Try following:
- Add a TimeStamp Datatype Column to the table on the SQL Server
- Rebind the tables into your database
- Try your code again
You never should run an Access Application against an SQL Server in readwrite mode without having TimeStamp datatype columns in your tables. Already for performance reasons this is a must and also, if you have datetime datatype fields on
the SQL Server that are not exclusively maintained by Access, as the SQL Server may add miliseconds when writing the data. Same for Single precision datatypes, that may be rounded until you get the result back from the server. If you have a Timestamp datatype
column in your table then Access is sure the record wasn't changed in the meantime and will not recheck the received record again against the database for changes in one of it's fields.
Henry
<aychekay> wrote in message
news:[email protected]...
This problem didn't go away yet. I'm having it too in Access 2007 (SP2 not installed yet) with a SQL Server 2008 Express backend. I'm sure my code is not reference any form controls or other object references. Access just complains if you try to run an Execute
with "DELETE" on a table that has an identity column. I've resorted to deleting using a DAO recordset and loop instead for now.
I actually started out using MySQL with MySQL's ODBC drivers and my statement worked fine. Only when I migrated to SQL Server did I start to have this problem.
Just sayin...

"Error 3000: Data Service is unavailable" error message (Web)?

Ever since I got my Palm, I've had difficulty getting on the web.
It says: "Connecting to Broadband Access" but then an error message box appears saying: "Service Connection Progress: Error 3000: Data service is unavailable".
I then have to soft reset every single time, and then I am able to access the internet just fine.
Is something wrong with my Palm? This is a brand new Palm I purchased through Verizon in June.
What can I do to fix this issue, without having to soft reset every time I want to access the internet?
Post relates to: Treo 700p (Verizon)

I have the same error (and other errors too) with my 700P from Verizon. This is what I have found with playing. All can be repeated.
1) If I turn off phone radio then turn back on I can browse the web all day long, I can send MMS messages, I can check my email, etc. All relating to the "data" portion of the Verizon service. No Problems. But.........
2) As soon as I make a call (use the "voice" portion of the Verizon service) and then try to do one of the following above mentioned I get all kinds of ERRORs depending on the specific program I'm in/trying to use. No matter what.... error, error, error, bla, bla.
3) I can turn the phone radio of then back on and all works fine "data" wise until I make another call.
4) Note, you don't have to do a soft reset or take the battery out to get it to begin working again, just turn the phone radio off then back on.
I HAVE DONE THIS AND CAN MAKE IT REPEAT EVERY TIME WITH THE PHONE FRESH OUT OF THE BOX OR AFTER PERFORMING A HARD REST or with all normal apps installed. Does not matter.
Some other tid bits of info....
1) It appears to not matter what city I am in. The problem is the same as discribed above. Confirmed cities are: Atlanta-GA, Savannah-GA, Memphis-TN, Columbia-SC, Bristal-TN.
2) It appears to ALWAYS happen on the "EDVO" network as the "EV" is always showing on the phone screen. Have not been able to try in an area with out the EV, aka the 1x area.
This PROBLEM of course is a MAJOR pain in the rear. I have called Verizon tech support about the problem multiple times. Eash time they said they had no "record" of me calling about the problem documented in their computer. The first tech said it was my software causing the problem and to do a hard reset and don't load the problem software back on (even though I already told him I did that). The next tech said it was a currpted file and to do the hard reset and reinstall and all would be fine (even though I already told him I did that) and said to trust him, he see this all the time. The next tech said the phone was bad and FedEx'd me a new phone. It did the samething right out of the box as described above. The last tech said they need to "re-provisioned" my phone and said that would fix the problem. So she did something on her end then told me to "program my phone" doing the *228, option 1. Still does it. No correction to the problem.

Unable to create records in database using PHP Data Service

Hello, I've been stuck on this for a few days and search up and down for this on the net, no response I've found has worked, so I come to you...
Here are the steps I've taken, I think it's pretty standard
1. I have a macbook pro running osx 10.7.3
2. I installed MAMP all default (I've acually reinstalled this because someone suggested this might fix it)
3. Thru phpMyAdmin I created a database called my_test
4. In that database I created a table, this is the export of that table: (I've also tried this with InnoDB which is the default)
CREATE TABLE `customer` (
`id` int(10) unsigned NOT NULL AUTO_INCREMENT,
`name` varchar(50) NOT NULL,
`email` varchar(150) NOT NULL,
PRIMARY KEY (`id`),
UNIQUE KEY `id` (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=1 ;
5. I created a new Flx Project (Running Flash Builder 4.5.1 Premium)
     Project Name: PHPTest
     Application Type: Desktop (Although I've done the same thing with Web and got the same results)
     >> Next
     Application Server Type: PHP
     Web Root: /Applications/MAMP/htdocs/
     URL Root: http://localhost:8888/
     Clicked 'Validate Configuration' and that worked
     Output Folder: /Applications/MAMP/htdocs/PHPService (default by Flash Builder)
     >> Finished
6. On the Data/Services tab on the bottom I click 'Connect to Data/Service...'
     Select 'PHP'
     >> Next
     Select 'Click here to generate a sample'
     Select 'Generate from database' radio button
     Username: root
     Password: root (default for MAMP)
     Host name: localhost
     Server port: 8889 (default for MAMP MySQL port, the HTTP port default is 8888 which in both cases seem to work but every video I've seen that uses MAMP on youtube uses 8889)
     Database: my_test
     Click 'Test Connection' (works)
     Table: customer
     Primary Key: id (this field is greyed out and Flash Builder selects 'id' which it figures out from the SQL table)
     >> Click OK
7. Then if I don't have the Zend Framework folder in my /Applications/MAMP/htdocs/ folder it tells me its going to create that and I say alright. Then Flash Builder says stuff about how this is really only for testing and not production server ready and I say alright.
8. Then it takes me back to the Form from Step 6 when I get the chance to select 'Click here to generate a sample'
     These fields are now filled with this data automaticly:
     PHP Class: /Applications/MAMP/htdocs/PHPTest/services/CustomerService.php
     Service name: CustomerService
     Service package: services.customerservice
     Data type package: valueObjects
     >> Click Next (shows all the functions that will be now availible)
     >> Click Finished (End of the forms and it opens Dreamweaver to the php file it created CustomerService.php which I have no need to edit so I close that down)
9. Back in Flash Builder I switch to design view and drag a datagrid onto the big white area in the middle, whatever that is called.
10. Then below in Data/Services tab on the bottom I click drag the function 'GetAllCustomer' on top of the datagrid.
     I say yes to rebound and click ok and the view of the datagrid is updated with the colums from the 'customer' table in mySQL.
(Now let me say that when I hit save and compile this, if I actually had records in this table that I insert thru phpMyAdmin, this does show in the datagrid. So for the whole CRUD thing I am able to get the R which is Read)
11. Now going back to the design view in Flash Builder I will create a form to create records in the table... (I guess this isn't really a step)
12. In the Data/Service tab on the bottom I select 'createCustomer' function and then there is an icon called 'Generate Form' that looks like a white piece of paper with a gear on the bottom of it.
13. This opens up a new form and since I don't have a crazy bunch of fields in my table I just click Finished (If you click next you can specify which fields you want to exclude from the form but this time I don't need to)
14. This actually creates 2 forms if you look at the code, the second just shows the return type from when you click 'CreateCustomer' button on the first form. Because they overlap in design view I drag the form out of the way so you can see the input form, the return form, and the datagrid
15. Then I save and compile...
(Also if your actually reading this I didn't remove the id form field, I get the same result either way, but if you do remove the form field in the code/design you also have to update the button function to not deal with the id before it gets sent off to the php page since in this case the MySQL table is set to auto_increment the id, sorry this doesn't make much sence but this little area doesn't matter much either way)
16. Now fill in whatever data you want for name and email, try differnt numbers in the id field like 0, nothing, 1, 1000 and click 'CreateCustomer'
(For me nothing happens, no return is put in the return field, no error pops up and the datagrid is not updated with the new record, also going over to phpMyAdmin and checking out the table browse doesn't show any changes either, I know the button is calling the function because if I add a state change in that function it changes, it would seem that the line:
createCustomerResult.token = customerService.createCustomer(customer2); doesn't do anything)
So any idea what is wrong here, I'm convenced it's something stupid easy simple I just can't see it.

In case you need more info, here is a code dump on a mxml project that has this problem:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx"
                       xmlns:customerservice="services.customerservice.*"
                       xmlns:valueObjects="valueObjects.*"
                       currentState="State1">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.events.FlexEvent;
            protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                getAllCustomerResult.token = customerService.getAllCustomer();
            protected function button_clickHandler(event:MouseEvent):void
                var customer2:Customer = new Customer();
                customer2.id = parseInt(idTextInput.text);
                customer2.name = nameTextInput.text;
                customer2.email = emailTextInput.text;
                currentState = "Test";
                createCustomerResult.token = customerService.createCustomer(customer2);
        ]]>
    </fx:Script>
    <s:states>
        <s:State name="State1"/>
        <s:State name="Test"/>
    </s:states>
    <fx:Declarations>
        <s:CallResponder id="getAllCustomerResult"/>
        <customerservice:CustomerService id="customerService"
                                         fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)"
                                         showBusyCursor="true"/>
        <valueObjects:Customer id="customer"/>
        <s:CallResponder id="createCustomerResult"/>
        
    </fx:Declarations>
    <s:DataGrid id="dataGrid" includeIn="State1" x="330" y="10" width="392"
                creationComplete="dataGrid_creationCompleteHandler(event)" requestedRowCount="4">
        <s:columns>
            <s:ArrayList>
                <s:GridColumn dataField="id" headerText="id"></s:GridColumn>
                <s:GridColumn dataField="name" headerText="name"></s:GridColumn>
                <s:GridColumn dataField="email" headerText="email"></s:GridColumn>
            </s:ArrayList>
        </s:columns>
        <s:typicalItem>
            <fx:Object id="id1" email="email1" name="name1"></fx:Object>
        </s:typicalItem>
        <s:AsyncListView list="{getAllCustomerResult.lastResult}"/>
    </s:DataGrid>
    <s:Form includeIn="State1" defaultButton="{button}">
        <s:FormItem label="Id">
            <s:TextInput id="idTextInput" text="{customer.id}"/>
        </s:FormItem>
        <s:FormItem label="Name">
            <s:TextInput id="nameTextInput" text="{customer.name}"/>
        </s:FormItem>
        <s:FormItem label="Email">
            <s:TextInput id="emailTextInput" text="{customer.email}"/>
        </s:FormItem>
        <s:Button id="button" label="CreateCustomer" click="button_clickHandler(event)"/>
    </s:Form>
    <s:Form includeIn="State1" x="0" y="204">
        <s:FormItem label="CreateCustomer">
            <s:TextInput id="createCustomerTextInput" text="{createCustomerResult.lastResult as int}"/>
        </s:FormItem>
    </s:Form>
</s:WindowedApplication>

Data services unavailable using just wi-fi

Similar Messages

Maybe you are looking for