Tracking data issue for iphone 4s

Hey folks
I am using iphone 4s and using with so many app. needed internet connection but my ''cellular netwark data'' sent and received does not change some how.
Cellular data usage does not reflect any usage. I would like to track my usage on the phone.
How can ı solve this problem?
ios 5.1.1
Thanks in advance.

Find out if your carrier offers an app for tracking data usage.

Similar Messages

Data Base For iPhone

I want a basic data base on iPhone to keep a list of movies.
Are there any apps someone is aware of?

there is a library for the app To connect to SQLServer DB?

Altitude/cold issues for iPhone 4?

I've had an iPhone for the past 3 years, and have updated this past weekend to the latest edition (4). I've been singing the praises of the phone at work for a few years now and have almost convinced my boss to get one. He just came into my office and we talked about this issue:
He's a mountain climber. He needs a new GPS, but has heard the iPhone has a GPS chip in it. His understanding is that the phone has GPS issues above 10,000 and below 32 degrees., He is subjected to both conditions on serious climbs. Is there an app that can help him despite the temps/altitude? Is the 10,000/32 just a rough number?
Any mountain climbers out there that can assist me?
Message was edited by: Gr8fulted

Well here are the specs about environment ranges for iPhone
Environmental requirements
* Operating temperature: 32° to 95° F
(0° to 35° C)
* Nonoperating temperature: -4° to 113° F
(-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
* Maximum operating altitude: 10,000 feet (3000 m)
Not sure how an App can alter any of that. A good case may but still face altitude issues.

Screen protector signal issues for iPhone 4?

I've been having the same problem with my iPhone 4 for a while now. The phone is perfect otherwise but on most occasions while using the phone i've been experienceing a loud crackling noise when making noise when making/recieving calls or no sound at all (no ringing and can't hear the other person speaking) however the speakers/mic work fine..
I've had a matte screen protector on the front of my iPhone ever since i've started using it and just recentley removed it and the phone is working perfect with the crackling/no sound problem gone! I have perfect clairity when making calls!
I was just wondwering is this possible that the screen protector could have caused this? To me I believe it has as the issue is now gone but my family don't think this is the case as it doesn't sound very likely a piece of plastic could do this?
Also if anyone could suggest a screen protector that could help prevent this from happening again I'd be very greatful. I think I might have to trial and error but some suggestions on where to start would be appreciated! My previous protector that I believe caused me this problem was the Power support HD anti-glare film ser for iPhone 4
Thanks in advance!

It's hard to believe a screen protector can cause such a problem, I still think it's tricky to blame the problem on your screen protector.
Maybe you could try some super thin screen protector and see if the same problem would happen again. If it does, then it's definitely something wrong with your iphone.

Posting date issue for COGI records.

Hi all,
I have one issue regarding the posting date for the records which are being cleared from COGI.
_In case of MF47 (Postprocessing for REM) following is the behaviour,_
In this if GR has happened on say 1st and due to stock un-availability components are gone to Post processing, Now when stock of component inwarded on say 20th then GI posting happens on 20th in post processing record clearance
_Now in case of COGI (Automatic goods movement : Error handling) behaviour is different,_
In this scenario if GR has happened on say 1st and due to stock un-availability components are gone to Post processing (COGI), Now when stock of component inwarded on say 20th then GI posting happens on 1st in post processing record clearance
I want same should be happened in case of COGI also, is there any note/ correction/option available??
Thanks in advance
Regards,
Vinayak.

Dear,
There are backlogs from the backflush in repetitive manufacturing. You can display these using Transaction MF47 and/or Transaction COGI. So schedule a job for program RMSERI11 on daily basis or hourly basis so it will clear the postprocessing errors.
But for some of the errors, it needs manual intervention like updating storage location, posting dates due to posting period block etc.
Hope clear to you.
Regards,
R.Brahmankar

Data recovery for Iphone 4s that was wiped

Hello forum.
Thank you for taking the time to review my question. I have an Iphone 4s that a client wiped (reset) The phone is currently in set up mode. My client had data (photos, notes, contacts) that were NOT backed up and were on the phone, prior to unintentional wipe. I can see that the DCIM folder has data in it, but when I look in the folder I see nothing. ( I am using iexplorer software to view the iphone folder structure on my PC. This is the software I'm using........ http://www.macroplant.com/iexplorer/
Is the data recoverable from this phone? Is so how do I go about getting it?
Thank you
JP

iphone phone accidental loss of data, do not worry, you can restore the data, and I just recently regained some lost cell phone data, you can also try
http://www.freeiphonedatarecovery.com/

ITunes Downloading Issue for iPhone Update 4.3

Hey,
I have an iPhone 4, and I'm running a MacBook Pro on Snow Leopard. For the past three hours, I've been trying to update my iPhone 4 to 4.3, and halfway through each update, iTunes disconnects the download, and I try to resume the download, but it won't pick up from the original point. It just restarts the download rather than resume. I have a pretty mediocre connection as it stands, but I can get this downloaded in a timely manner. I'm just wondering why it won't resume and restarts instead more than anything.
Any answers are much appreciated!
Message was edited by: erad1cate

Hi,
I have a pretty mediocre connection as it stands
Not sure exactly what you mean by mediocre but once the connection is dropped then the download has to start from scratch.
Try restarting your iPhone and your Mac. Then try updating to 4.3
It may not be your connection but your MacBook (Pro?) unless you were able to resolve the kernel panic issue here: http://discussions.apple.com/message.jspa?messageID=11001688#11001688
Carolyn

Safari website data history for iPhone 4

How far back is website data for safari saved? Would it have website data from before the big iPhone update a few months ago?

I know the history only goes back for a weeks or so, but I am talking about website data from safari. To get to it you go to settings, then safari, then advanced settings. It lists how much data you have downloaded from each website. I am sure website data goes back farther than that because I can see website data from a website that I used for school 3 or 4 months ago.

What does "Other" mean in data usage for iPhone storage?

I have a 32 GB iPhone 5S and when I got it, I did NOT restore it from a backup and when I plugged in my phone to sync music, it says:
Audio: 8.94 GB
Photos: 6.37 GB
Apps: 1.48 GB
Documents and Data: 648.2 MB
Other: 7.08 GB
What's the other category consist of and how do I delete its data?

Take a look at this link, http://osxdaily.com/2013/07/24/remove-other-data-storage-iphone-ipad/

My data plan for Iphone 5 is 2gb, at home and I search for data or other things on web, am I charged against my data plan or since its connected to computer via my network connection is there no loss of data

when at home my phone is connected to my computer network,does that mean no data charged against my monthly allotment now at 2gb

If you are connected to wifi at home or elsewhere you shouldn't be using any of your Verizon cellular data. I say shouldn't because there are a number of posts/threads on this forum where customers are reporting glitches with their iPhones and they indicate they are being charged data when on wifi.

GR document and posting date issue for initial stock upload are overidden

Hi all
Loading initial stock into the system using standard idoc message type MBGMCR and basic type MBGMCR02.
We are trying to post the intial stock upload with posting and document dates in past with this idoc. The Idoc is accepted with these dates but while posting the system is overiding these dates and posting the document with system date. Any clue as to what is happening?
Regards,
Amit

Hi Jurgen
I am aware about the posting being possible till the last period.
But the system over-riding the posting and document dates in the IDoc even if I chose previos day's date in the current period. The dates in the IDoc are correct to be in the past. The IDoc is accepted by the system with the document and posting dates in the past.
But dates in the document after posting are system dates. Very unsual. Please let me know the reasons.
Thanks for the reply.
Cheers,
Amit

Ad Hoc Query Data Issue for Position Based Infoset

Experts,
I've created an infoset that is based on the S object using the PCH database. For this infoset, I've included several infotypes with focus on 1000, 1001, and 1028. I've included the Address infotype (1028) as this is where we store our work location information. For some reason though when I attempt to pull information from 1028, specifically the House Number and Street field, the Postal Code field, and the City field.
For some reason though, no data is being returned in those fields. I've verified for the position (in PP01) that I'm querying on that the data is maintained in 1028, and I've verified that I'm attempting to report on the correct fields by verifying the field technical names I'm pulling in the Ad Hoc Query with those I know have data stored in them on the infotype for the specific position.
Would anyone have any guidance on what could be happening here or what I might need to adjust to be able to pull this data?
Thanks in advance for your time and help.
Best Regards,
Joe

To add some further clarity to this item, the Address infotype on the Position (S) object is pulling from a dropdown of selectable Buildings. If unfamiliar, the Building drop is populated by configuration data from the IMG. The fields that are populated then in the Address infotype actually come then from the Building entries and are simply populated onto IT1028 (address) depending on which Building is selected.
I think this is what it occuring then when I select the fields from the Address infotype and I see nothing populated in the Ad Hoc query since the field information is not actually stored in IT1028 but on in the Building entry.
Has anyone else experiencing this particular problem? If so, have you found a solution?
Regards,
Joe

Cost Center Master Data Issue for Hierarchy

Hi,
We are building a hierarchy on Cost Center and realized that the way Master data on Cost Center is stored in SPM it's getting concatenated with Controlling Area. So CC 1234 becomes 1234_010 where 010 is a controlling area.
While we understand a need to make CC unique across several controlling area, it's impacting Hierarchy. In Hierarchy we only upload CC and not CA.
Do you recommend to do concatenation of CC & CA for Hierarchy as well so that it matches with Master? Or is there any other recommended way to go ?
Regards

Hi Rohit,
That was helpful. We will certainly take concatenation route.
However in Invoice Extract File we do get CC & CA separately in XARCOCTR & XSACOARR fields respectively.
When you say that this is concatenated even on Transaction Data are you talking about data AFTER it is loaded into SPM ? Also when data is sent out to DSE will it have CC & CA concatenated ?
Regards,

Ios 6 email issue for Iphone

Ok before I updated my Iphone too Ios 6 I could read work information speadsheets from the email attached to the phone. Now (after updating my phone to Ios 6) I can not read those same emails. The spread sheet still appears, most of the information is readable. But the core information has a zore-sum code in the box. Not sure what too call it. I have tried the "letter opener" app, but gives me the same problem. I am pretty sure the email are a outlook express file.

A week or so ago somebody posted a simeila/same problem. It seems that iOS 6 no longer reads/displays Excel speadys geneated with older versios of Excel.
You can try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.

TS1717 iOS 4.5 download issues for iphone

Can anyone tell me how to "reactivate" my phone having downloaded iOS 4.5. It will not accept the fact that my sim card is in the phone and the message that it will take a few minutes to complete the process has been on my phone for days!

4.0.1 provided a fix only for the iPhone. It's not intended for the Touches.

Tracking data issue for iphone 4s

Similar Messages

Maybe you are looking for