Ad Hoc Query Data Issue for Position Based Infoset

Experts,
I've created an infoset that is based on the S object using the PCH database. For this infoset, I've included several infotypes with focus on 1000, 1001, and 1028. I've included the Address infotype (1028) as this is where we store our work location information. For some reason though when I attempt to pull information from 1028, specifically the House Number and Street field, the Postal Code field, and the City field.
For some reason though, no data is being returned in those fields. I've verified for the position (in PP01) that I'm querying on that the data is maintained in 1028, and I've verified that I'm attempting to report on the correct fields by verifying the field technical names I'm pulling in the Ad Hoc Query with those I know have data stored in them on the infotype for the specific position.
Would anyone have any guidance on what could be happening here or what I might need to adjust to be able to pull this data?
Thanks in advance for your time and help.
Best Regards,
Joe

To add some further clarity to this item, the Address infotype on the Position (S) object is pulling from a dropdown of selectable Buildings. If unfamiliar, the Building drop is populated by configuration data from the IMG. The fields that are populated then in the Address infotype actually come then from the Building entries and are simply populated onto IT1028 (address) depending on which Building is selected.
I think this is what it occuring then when I select the fields from the Address infotype and I see nothing populated in the Ad Hoc query since the field information is not actually stored in IT1028 but on in the Building entry.
Has anyone else experiencing this particular problem? If so, have you found a solution?
Regards,
Joe

Similar Messages

Ad-Hoc query output issue

Hello Experts,
Recently we have upgraded the system and we are facing issues with Ad-Hoc query output.
Issue : After entering data in selection fields and click on "OUTPUT" button we are getting output. now I changed the selection field data and click on "OUTPUT" button then we are getting message "No Data selected".
But when clicked on "HIT LIST" button for changed selection fields then we are getting HIT LIST count and after click of "OUTPUT" button we are getting output.
So at this point this is unclear why it is working after HIT LIST? This is not consistent but appearing most of the time.
Regards,
Saurabh

Thank you for reply. Yes I have checked SQ03, 02 and 01.
It is not specific to particular query it is appears to be for all the queries.
The important thing is to get the output we need to click first HIT LIST button and then OUTPUT. Is there any specific settings maintained for displaying output without clicking HIT LIST ?

Is there any difference in upgrade for position based security model

Hello Gurus,
I am working on a Upgrade project from 4.6c to ECC6.0 , In 4.6C R/3 system position based security concept is used.
Are there any extra precautions need to be taken while upgrading in a position based security model ?
Or
Is it the same procedure either it is a role based security model or a postion based security model.
iam new to this upgrade stuff, please kindly direct me in the right direction.
Also please provide if any documents are available.
Thanks,
Sanketh.

Hi,
Already there are many document posted on SDN on same . Security upgrade is standard and mostly deal with role modification and can you elaborate more on Position based. Positiong related assignment also taken care with respective functional team for ex :HR and technical team Workflow if there are any issues.
Better you go throug the upgrade document .see post already available in forum before starting with upgrade.
Experts correct me in case of correction.

0HRPOSITION master data issue when position is delimited

We are live with BW HR application and having issue with 0HRPOSITION master data. We are extracting data from SAP using 0HRPOSITION_ATTR datasource. I noticed that data is not maintained correctly in master data tables in BW and giving us incorrect results in reporting. Consider below mentioned scenario:
Position A created as vacant on 05/01/2008 with start date (BEGDA/ Valid from) as 05/01/2008 and End date (ENDDA/ Valid to) as 12/31/9999 and is vacant. Below mentioned entry is shown under maintain master data for 0HRPOSITION in BW:
Position Valid To Valid From Position Vacant
A 04/30/2008 01/01/1000
A 12/31/9999 05/01/2008 X
Position A is now delimited on 09/15/2009 as its no more required. In SAP, position has record only from 04/01/2006 till 09/20/2009 as vacant. When record is extracted in BW, it creates below mentioned entry in master data table.
Position           Valid To     Valid From     Position Vacant Indicator
    A             04/34/2008    01/01/1000
    A             09/20/2009    05/01/2008                  X
    A             12/31/9999    09/21/2009                  X
Entry 09/21/2009 - 12/31/9999 is incorrect as position does not exist for this duration and it is neither vacant nor occupied. If we report on 0HRPOSTION with key date as 09/30/2009 , it shows position A as vacant though position no longer exists.
Has anyone come across this situation. any help is greatly appreciated.
Thanks & Regards,
Prithi Iyengar
Edited by: Prithi Iyengar on Dec 23, 2009 3:07 PM

Hi,
We do a full update data load for 0HRPOSITION attribute as well as text on daily basis. Attribute change run are scheduled in the process chains. No issues with that..
In the report, we have the display option of 0HRPOSITION as key and text. Now what is happening is that for most of the positions the text is displayed perfectly but only for those positions which were delimited the text description is not displayed in the report. It is displayed as blank. For eg consider positions A, B, C and D. Say A, B are active positions and C & D have been delimited at a cerain period of time.
*Master data table is:*
Position -- Valid_from -- Valid_to -- Description -- Org. Unit
A         -- 01.05.2008 -- 31.12.9999-- Text1   --- A001
B         -- 01.06.2009 -- 31.12.9999 -- Text2   --- B001
C         -- 01.06.2009 -- 01.08.2009 --- Text3 --- C001
C         -- 02.08.2009 -- 31.12.9999 -- ........   --- ....
D         -- 01.07.2008 -- 15.06.2009 -- Text 4 --- D001
D         -- 16.06.2009 -- 31.12.9999 -- ........ --- ...
In report, say i run for date 01.05.2009 to 31.05.2009,
Position -
No. of positions
Key -
Text
A     | --- Text1 | 1
B     | --- Text 2 | 1
C     | --- .......... | 1
D     | --- .......... |1
If you notice, the description is maintained for positions C & D in time period 01.05 to 31.05 but the text is not displayed in the report.
Thanks,
Edited by: Prithi Iyengar on Dec 23, 2009 5:30 PM

Template for Position Based Role Generation - Grouping of Transaction

Hi
We have almost 3500 Roles. They are all Role based / Transaction Based. We would like to shift it to Position Based Roles.
Is there any template or high level document which can give you the information regarding the grouping of transaction with respect to module vise like HR, SD, MM, PP etc..
It should narrow down further to give you info regarding the transactions with respect to the the standard postions provided by SAP which we can use it as a baseline and develop on that.
Any help would be appreciated.
Thanks and Regards
Arun

Hi,
please have a look at the standard SAP* roles. They are grouped by applicaiton and alos some are grouped by position. So this may be an entry point for you.
b.rgds, Bernhard

Data structure for web-based discussion forum

Hello all. I have begun work on a discussion board forum but have not yet decided upon a data structure for the hierarchy of messages to be left on a board. Any one have any thoughts or experience in this matter? My first thought was to implement a basic linked list in which every reply to a message would be a new child of a node. This would require I use recursion in some areas for counting and finding messages but I was also thinking that this way I can store each thread object in a simple fashion using serialization.
SJ

THE STANDARS DIRECTORY STRUCTURE IS :-
PROJECT FOLDER
|
|---------->WEB-INF
|------> web.xml file
|-------> classes (folder to keep java files)
|-------> lib (folder to keep jar files)

Data Acquisition for Position Transducer

I just purchased an Analog Position Transducer from SpaceAge Control, and was wondering if anyone had any code to gather the data. I must admit i'm lost when it comes to this, I thought the transducer would come like an instron where you just plug it into the computer. I have a six pronged plug that exits the device. I have a couple TI data acquisition boards at my disposal. I am hoping someone has used a similar product or has some advice. Thank You
Keith

We have lots of code to gather data in all sorts of ways. Building measurement applications is what we do. Since you are lost when it comes to this, you would do well to hire a guide in the form of an Alliance Member company. We do this stuff every day.
Your TI DAQ boards may do the trick, but you would have to show someone the specs for them. Also, you need to think about what kind of speed you require and where you want the position data to go. Table? Plot? Database? A good LabVIEW developer can set you up with some code that does exactly what you want.
Daniel L. Press
PrimeTest Corp.
www.primetest.com

Posting date issue for COGI records.

Hi all,
I have one issue regarding the posting date for the records which are being cleared from COGI.
_In case of MF47 (Postprocessing for REM) following is the behaviour,_
In this if GR has happened on say 1st and due to stock un-availability components are gone to Post processing, Now when stock of component inwarded on say 20th then GI posting happens on 20th in post processing record clearance
_Now in case of COGI (Automatic goods movement : Error handling) behaviour is different,_
In this scenario if GR has happened on say 1st and due to stock un-availability components are gone to Post processing (COGI), Now when stock of component inwarded on say 20th then GI posting happens on 1st in post processing record clearance
I want same should be happened in case of COGI also, is there any note/ correction/option available??
Thanks in advance
Regards,
Vinayak.

Dear,
There are backlogs from the backflush in repetitive manufacturing. You can display these using Transaction MF47 and/or Transaction COGI. So schedule a job for program RMSERI11 on daily basis or hourly basis so it will clear the postprocessing errors.
But for some of the errors, it needs manual intervention like updating storage location, posting dates due to posting period block etc.
Hope clear to you.
Regards,
R.Brahmankar

Data Selection for report based upon a 'Prompt Value'

I want to report information in my report based upon a 'user input prompt value'
for example:
'Enter Shareholder Selection - A-Active, I-Inactive, B-Both Active and Inactive'
if the user enters 'A', the report selects only active shareholders
if the user enters 'I', the report selects only inactive shareholders
if the user enters 'B' the report selects all shareholders, active and inactive
the field in the database that this based upon is their total share value.
if this field is greater than zero (>0) they are considerd 'active'
if this field is equal to zero (=0) they are considered 'inactive'.
I have tried creating some type of filter, but am not having any luck.
I saw a few examples within the forums that I have tried without any luck....unfortunately most of the examples I've seen are base one only two choices.
I'm sure I need to create some type of 'independant varible' but am not sure how to do that either.
Any suggestions would be appreciated.
Thanks.

Hi Daryl,
I Tried this unsuccessfully in DESKI . We can't Eliminate Rows having Empty Measure Values or Measure with 0 as values using Table Level Filter as FIlter can't FIlter rows based on Prompt value selection dynamically. Filters filter rows at a time and not based on 3 condition as Active, Inactive and Both. thus filters are of no use.
I Tried this in WEBI, and it is working perfectly you donu2019t have to create any Object in Universe, you can do it using function UserResponse() at report level.
Hence if you are comfortable using WEBI for Generating this report then Follow the steps.
1. Create Report With Name and Shares Object. It will display all Shareholder Names and No.of shares they hold.
2. Use Status Object in Query filter, use condition as u201CEqual Tou201D and Select prompt. It contains Active, Inactive and Both as values.
3. Report will Display all Shareholder names and No. of shares like 45, 789, 0, 4562 where 0 is inactive Shareholder and all other are active shareholder.
4. Create Variable using Formula.
=If(UserResponse("Enter Status:")="Active" And [Shares]>0;[Shares];If(UserResponse("Enter Status:")="Inactive" And [Shares]<=0;[Shares];If(UserResponse("Enter Status:")="Both";[Shares])))
5. Remove Shares Object from the report and Put Variable created with Names of Shareholders.
6. Select Table-> Properties-> Display-> Uncheck the Option u201CShow Rows with Empty Measure Valuesu201D
7. Report will display Value correctly as per your Prompt value selection.
I Hope this Helpsu2026
Thanksu2026
Pratik

Agreement issue for Event based Billing

Hi,
We are on R12.0.6 and using Project Billing (not using Project Costing)
For the monthly reimbursements approved by our customer, we create project & task based events, enter total amounts in revenue and billing fields. We use Event types in AA rules to record revenue in different account codes.
Customer issues quarterly POs for this purpose. So there are multiple POs against single Project & Task.
For the revenue accrued and billing done in the past, if we need to make adjustments, is there a functionality available similar to that of expenditure item? e.g. split, transfer etc so that linkage with originally billed item will be maintained?
If there is no such functionality, then we will have to enter negative events. In that case, how do we ensure that correct agreement will get picked (same as that of the original revenue-invoice)? Also, since rules for revenue and invoicing are different, we will not have control on whether same agreement will get picked for negative revenue and credit memo.
Please help
Regards,
Ketan

Hi
Controling the agreement that will be used is a new feature Oracle presented with R12.1.1.
You might want to look at upgrade.
On your corrent release, the solution is more complex (however, it works for us).
A) Add a flexfield on the event form, so user may enter the agreement number for any new event.
B) When running the GDR / GDI processes, users should enter the agreement number as a parameter.
C) Develop a billing extension called on pre-processing of GDR/GDI. That extension reads the agreement number on the parameter, and then go on and put all existing events of the project on hold, but those events with the sameagreement number on their dff. The same billing extension is also updating the customer on all agreements which are not the selected agreement. Upodate to a dummy customer which is not one of the project customers.
D) Develop a billing extension called on post-process of GDR/GDI. That extension remove the hold from all events, and also update back the customer on all agreements from the dummy customer to the real project customer.
Dina

Ad-hoc query - data on one line pr.employee

Hi,
I try to get data on one line from ad-hoc reporting. When I choose to report on several IT0105 subtypes, the subtypes are written out on one line each pr. employee. This does not look good, and is a hazal to our customer since they need to edit the report in excel. I have tried to code the switches "PERSON_ONLY_ONCE" and "LAST_DATA_ONLY" without results. Any hints/tip?
Thank you,
Kind regards
Hilde

hello hilde,
I think it is not possible to do it with ad-hoc.
you have to use query itself, with creating your own layout.
SQ01
regards
Stefan

Dynamic Query Data issue...Apex Charts

Database version and APEX version are in the tags...11g and4.1.2
I have data in this format
NODE_NAME
REPORT_DATE
STORAGE_AMOUNT_ALLOC
Anole
01/01/2013
3175
Fiji
01/01/2013
0
Anole
02/01/2013
3175
Fiji
02/01/2013
0
Anole
04/01/2013
3276
Fiji
04/01/2013
0
Anole
05/01/2013
3276
Fiji
05/01/2013
0
Anole
06/01/2013
3276
Fiji
06/01/2013
0
I've build a Dynamic query which returns:
SELECT NULL LINK,report_date DATIME,decode(NODE_NAME,'Anole',STORAGE_AMOUNT_ALLOC)"Anole",decode(NODE_NAME,'Fiji',STORAGE_AMOUNT_ALLOC)"Fiji" FROM STORAGE_REPORTS WHERE report_date between to_date('01-JAN-2013','DD-MON-YYYY') and to_date('01-JUN-2013','DD-MON-YYYY') and (INSTR(':Anole:Fiji:', ':'||NODE_NAME||':') > 0) ORDER BY report_date ASC
The resultant data is
LINK
DATIME
Anole
Fiji
01/01/2013
3175
01/01/2013
0
02/01/2013
3175
02/01/2013
0
04/01/2013
3276
04/01/2013
0
05/01/2013
0
05/01/2013
3276
06/01/2013
3276
06/01/2013
0
When I put the above query to the chart it give me accurate series with one..however when I add a second NODE to the query it completly hacks the chart. I have a feeling this is because I have repeating dates and it doesn' know how to handle this. So I'm wondering how I get rid of the repeating dates. and make them all one row with columns for each series.
Thanks
Rob

apex version? database version?
if you're on 11g, it sounds like you want the PIVOT command.
you should also post a simple CREATE TABLE and a few INSERT statements so others can test.
select null link
,report_date as datime
,"Anole", "Fiji"
from ( select REPORT_DATE, NODE_NAME, STORAGE_AMOUNT_ALLOC
from STORAGE_REPORTS
PIVOT (
sum( storage_amount_alloc )
for (node_name)
in ( 'Anole' "Anole", 'Fiji' "Fiji" ) -- rename columns here
where report_date between to_date('01-JAN-2013','DD-MON-YYYY') and to_date('01-JUN-2013','DD-MON-YYYY')
order by report_date asc

GR document and posting date issue for initial stock upload are overidden

Hi all
Loading initial stock into the system using standard idoc message type MBGMCR and basic type MBGMCR02.
We are trying to post the intial stock upload with posting and document dates in past with this idoc. The Idoc is accepted with these dates but while posting the system is overiding these dates and posting the document with system date. Any clue as to what is happening?
Regards,
Amit

Hi Jurgen
I am aware about the posting being possible till the last period.
But the system over-riding the posting and document dates in the IDoc even if I chose previos day's date in the current period. The dates in the IDoc are correct to be in the past. The IDoc is accepted by the system with the document and posting dates in the past.
But dates in the document after posting are system dates. Very unsual. Please let me know the reasons.
Thanks for the reply.
Cheers,
Amit

Tracking data issue for iphone 4s

Hey folks
I am using iphone 4s and using with so many app. needed internet connection but my ''cellular netwark data'' sent and received does not change some how.
Cellular data usage does not reflect any usage. I would like to track my usage on the phone.
How can ı solve this problem?
ios 5.1.1
Thanks in advance.

Find out if your carrier offers an app for tracking data usage.

Cost Center Master Data Issue for Hierarchy

Hi,
We are building a hierarchy on Cost Center and realized that the way Master data on Cost Center is stored in SPM it's getting concatenated with Controlling Area. So CC 1234 becomes 1234_010 where 010 is a controlling area.
While we understand a need to make CC unique across several controlling area, it's impacting Hierarchy. In Hierarchy we only upload CC and not CA.
Do you recommend to do concatenation of CC & CA for Hierarchy as well so that it matches with Master? Or is there any other recommended way to go ?
Regards

Hi Rohit,
That was helpful. We will certainly take concatenation route.
However in Invoice Extract File we do get CC & CA separately in XARCOCTR & XSACOARR fields respectively.
When you say that this is concatenated even on Transaction Data are you talking about data AFTER it is loaded into SPM ? Also when data is sent out to DSE will it have CC & CA concatenated ?
Regards,

Ad Hoc Query Data Issue for Position Based Infoset

Similar Messages

Maybe you are looking for